Schüco Dvojna Kotna Žaga nakup rabljenega (6.638)

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 Lajdpfx Aaoukhd Asmod 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: zelo dobro (rabljeno), Delovna višina 8 cm, pnevmatski motor 2 x 0,9 kW Lasdpfx Aajy Tm Hdemsd V zelo dobrem stanju.

Stanje: zelo dobro (rabljeno), Moč motorja: 2,2 kW x 2; Kot rezanja: 45° v obe smeri; Višina reza: 9 cm; Dolžina: 175 cm; Širina: 145 cm Lajdpfx Aasy S S Ukomjd

Stanje: novo, Working length: 3,700 mm, 5,100 mm, 6,100 mm Working height: 160 mm Tiltable: yes Rapid DGL 200 M Double Miter Saw ----- with 500 mm saw blade diameter, manual length adjustment with digital length display, pneumatic angle adjustment for 45° and 90°, intermediate angles can be set manually using the scale. Easy operation and highest quality ----- For precise and burr-free cutting of aluminum, plastic, and wood profiles. System features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Extremely robust machine bed - Complete encasement of the guide bushes around the guide shafts of the saw head - Hardened guide shafts - Swivel axis mounted on both sides Digital length display: ----- - Digital length display with 30 profile numbers and corresponding corrections - Edit the 30 profile numbers (name + correction) directly in the display - The correction is factored in based on the saw’s angle position (45° and 90°) - Piece counter: if the length display changes by more than 0.1 mm, the piece count resets to "0" - Stop for short parts: converts length and profile height based on the angle position Application examples: ----- Window, door, façade, conservatory, insect screen profiles, Ljdpfxsxmk Aao Aamoad partition wall systems, interior sliding door elements - PVC, PVC-Alu - Aluminum - Wood, wood-aluminium Perfect precision in dimension and angles guaranteed. ----- We use precise and efficient movement technology for this: Linear ball bearings for length adjustment, spring-loaded pivot units for easy and safe angle adjustment between 45° and 90°. Both length and angle adjustments on this double-head miter saw are manual. Greater convenience and higher performance can be achieved with the digital length display and pneumatic tilting unit. With 500 mm saw blades, a wide range of profile systems can be processed. Technical data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Swivel range: manual 45° to 90° Saw blade: 500 mm diameter Cutting lengths: 3,700 mm, 5,100 mm, 6,100 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders (optional) Length adjustment: manual Air pressure: 7 bar Dimensions: 5,250/1,420/1,900 mm Weight: 1,260 kg Options ----- - Hydropneumatic feed - Spray system - Stop for short parts - Rubber-coated vertical clamps - Vertical clamps with support plate for profile-dependent parts - Gasket clamping device - Digital length display - External fixed and centrally movable profile supports - Roller supports at the movable or fixed saw unit - Chip extraction system (Technical data as per manufacturer – subject to change/errors excepted!)

Stanje: novo, Working length: 3,700 mm, 5,100 mm, 6,100 mm Working height: 160 mm Swivelling: yes Control: yes Rapid DGL 200 E Double Mitre Saw ----- with 500 mm saw blade diameter, electronic length and angle adjustment (45° and 90°, intermediate angles manually adjustable via scale) Precision cutting of profiles ----- For precise and burr-free cutting of aluminium, plastic, and wooden profiles. System features: ----- - Automatic length adjustment - Manual or electro-pneumatic angle adjustment 45°–90° - Saw blade Ø 500 mm - Extremely rigid machine bed - Complete enclosure of guide bushings around the guide shafts of the saw head - Hardened guide shafts - Swivel axis supported on both sides Application examples: ----- Window, door, façade, conservatory, insect protection profiles; Partition wall systems; interior sliding door elements Ledpsxmk Agsfx Aamsad - PVC, PVC-Alu - Aluminium - Wood, wood-Alu Perfect dimensional and angular accuracy guaranteed. ----- With the double mitre saw DGL200E, we offer you a reliable quality product from our range of precision double mitre saws, so that you can supply your customers with flawless high-quality construction elements. Cutting lengths can be uploaded to the control system of this double-head mitre saw via network or USB connection, or entered manually via the keyboard. Special software solutions enable automatic positioning for cross cuts, overlengths or short dimensions, allowing processing of lengths outside the machine’s cutting range. An optimisation program with offcut management helps to minimise waste, thus reducing costs and ensuring sustainable use of valuable materials such as aluminium, plastic, or wood. A thermal label printer with dispenser, ergonomically positioned directly beneath the control terminal, enables efficient labelling of finished parts. Good and controlled offcut removal of the base machine can optionally be supplemented with a conveyor belt system. Technical Data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Swivel range: manual 45° to 90° (up to 135° optional) Saw blade: 500 mm diameter Cutting lengths: 3,700 mm, 5,100 mm, 6,100 mm Profile clamping: 2 horizontal clamping cylinders; 2 vertical clamping cylinders (optional) Length adjustment: electronic Air pressure: 7 bar Dimensions: 5250/1420/1900 mm Weight: 1,260 kg Control ----- PCE 6000 Positioning and length cutting control PCE 6000 based on Windows 10 IOT for modern window manufacturing on RAPID double mitre saws. 128 GB SSD, 8 GB RAM, approx. 10 GB database for cutting programs and profile data. Standard equipment: - Single cut - Program cut - 2x USB interface - TFT screen - Graphical representation of profile cross-sections - Backlit display - Control display integrated in the two-hand control console Optional features at extra cost: - Offcut optimisation - Software stop for overlengths - Software stop for short parts - Cross-cutting function - Profile height measurement device - Label printer (standard label...

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Crosscut Saw, Mitre Saw OMS FC 350 R 2.2 kW - after technical inspection Specification: • Technical condition: used, after inspection • Manufacturer: OMS • Model: FC 350 R • Blade diameter: 350 mm Ljdpfsy Rh D Eox Aamoad • Saw motor: 2.2 kW • Maximum workpiece dimensions at 90°: 110 x 150 mm (height x width) • Blade guards to ensure operator safety • Extraction nozzle diameter: 60 mm • Cutting angle adjustment: +/- 45 degrees (note: machine does not maintain perfect precision at extreme angles) • Overall dimensions without tables: 82 x 80 x 76 cm (L x W x H) Additional information: • The machine is in decent technical condition and ready for immediate use • The photos shown reflect the actual condition of the item for sale • Possibility to start and inspect the machine on site • The price listed in the auction does not include VAT or transport costs Financing and transport: • We organize transport using the MDD fleet, courier services, or third-party carriers • We offer financial support in the form of leasing or lease loans

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Double mitre saw OMGA TR2A for wood and aluminium – after technical inspection, ready for operation Specification: • Technical condition – used, after comprehensive inspection • Manufacturer – OMGA • Model – TR2A • Main motors – 2 x 1.65 kW (3,000 rpm) • Pneumatic head control • Maximum cutting length – 312 cm • Minimum cutting length – 10 cm • Maximum cutting cross-section – 80x145 mm (at 90°) • Maximum blade diameter – 300 mm • Mitre cutting from -45 to +45 degrees (right, left) • 3 working modes • Vertical workpiece clamps • Extraction ports – diameter 80 mm • Weight – approx. 500 kg • Overall dimensions – 436 x 115 x 125 cm (L x W x H) Ledpey Rh Drefx Aamead Additional information: • The machine is in good technical condition and ready for immediate use • The attached photos show the actual condition of the item for sale • The device can be powered up and tested on-site • The auction price excludes VAT and transport costs Financing and Transport: • We organise transport via MDD fleet, courier companies, or external carriers • Financial support available in the form of leasing or lease loan

Stanje: rabljeno, moč: 2 kW (2,72 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, največja višina reza: 135 mm, vrsta nastavitve višine: mehanski, največja hitrost vrtenja: 3.800 obr/min, vrtljajska hitrost (min.): 3.800 obr/min, Prečna in kotna žaga Graule ZS 135, največja višina reza 135 mm, največja širina reza cca 430 mm, žagin list D = 350 mm, nastavitev kota +45°/0°/-45°, motor 2 kW, priključek za odsesavanje D = 100 mm, kot je bilo ogledano, z lokacije Seevetal, brez transporta, vmesna prodaja pridržana. Ledpfxjy Sla Tj Aamjad

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4150 x 1200 x 1650 mm Weight: 450 kg Total power requirement: 1.5 kW Double Mitre Saw WEGOMA DS110S Technical Data: - Working length: 3300 mm - Left head fixed - Hydropneumatic saw feed - Heads can rotate left and right Laedpfxjvz Ezws Aamsd - Mitre angles from 90° to 45°, suitable for compound cuts - Positioning via scale with clamping device - Air blow gun - Includes 2 carbide saw blades 400 x 30 mm - Motor: 1.5 kW - Voltage: 400V, 3~, 50Hz - Saw blade diameter: 400 x 30 mm - Saw blade speed: 3800 rpm - Min. cutting length: 500 mm - Max. cutting length: 3200 mm - Profile width/height at 45°: 140 x 120 mm - Profile width/height at 90°: 200 x 120 mm - Air connection: 6-8 bar - Size (LWH): 3900 x 1200 x 1650 mm - Weight: 550 kg Features: - Left saw head fixed; right saw head moves smoothly along precision ball bearings on hardened and polished shafts - User-friendly operation: Elgo digital display for position monitoring - Fine length adjustment for the right head and clamping units - Manual setting of saw head to 45°/90°/135°, locking by safety pins - Two-hand safety operation - Hydropneumatic saw blade feed - Pneumatic vertical clamping device - Pneumatic horizontal clamping device for stable sawing - Controller for cut lengths up to 3200 mm - Support for double profiles - Intermediate angles set manually via the angle scale on the table and secured by safety pin - Cooling spray system for aluminium workpieces - Suitable for large profiles – maximum width 200 mm Option: Digital Display DZ-FAHR on movable head EUR 1,440,-

Stanje: novo, Comparable to Emmegi, Elumatec, Pressta-Eisele, Pertici, Fom, etc. 3 NC axes for length as well as electronic tilting of the saw blades outward 22.5° and inward 135° Cutting length: 5000mm Processing of single cuts Processing of cutting lists Creation of cutting lists via keyboard Import of cutting lists via USB drive or network Automatic mitre function / incremental cutting Processing excess-length cuts Short cuts from 5mm cutting length Cross cuts Manages printing of labels with data or barcodes Hydropneumatic saw blade feed, infinitely adjustable Pneumatic safety covers Traveling roller conveyor at the right saw unit with additional clamping cylinder Length positioning taking saw angles and profile height into account Profile height measurement with length compensation incl. horizontal clamping cylinder Each saw unit with one horizontal and one vertical clamping cylinder Additional horizontal clamping cylinder on the fixed left saw unit, to the left of the saw blade 1 piece profile support between saw units, pneumatically swiveling With two-hand operation IPC with Windows Embedded and HMI 15.0" touchscreen Including the following options: Minimal quantity spray devices Label printer Network connection for teleservice, 1-year subscription Lodewnfvtepfx Aamoad We always have compatible extraction systems in stock—also for existing aluminium saws!

Stanje: rabljeno, Leto izdelave: 2016, Mitre plate saw with automatic pre-tensioning and double pusher system for optimized cutting Laodpfx Aaeuc Idxjmed OSI Plus numerical control OS Labeling – onboard labeling unit with graphical marking of parts including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Powered feed rollers for side loading via lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of disposable (sacrificial) boards based on specified thickness data in the machine parameters Low stack stop Automatic side loading. Includes: containment fences, twin photocells, pushbutton panel, electrical preparation for the two powered infeed roller conveyors, plus reinforcement with 4 rollers instead of fork passages on the infeed conveyor Intermediate roller conveyor Side loading roller conveyor measuring 3800 x 2200 mm with powered rollers (floor-to-conveyor height 325 mm) Gravity conveyor for longitudinal offcuts to corner station 4500 mm (total length: 7295 mm) 3000 mm conveyor extension for crosscut offcuts Long chute for manual crosscut transportation to the central gravity conveyor Air-cushion outfeed table 2050 x 850 mm, front side equipped with wheels Air generator for up to 6 air-cushion table decks MULTIPUSHER 2.4 System with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows reduction of the minimum panel length to be crosscut from 1830 mm to 1220 mm Automatic device for detecting blade shaft flexure in angular cuts (longitudinal and cross axes), consisting of a sensor for direct deflection measurement on the blade shaft and a device for recording saw blade revolutions directly at the chuck Remote-cycle start keypad Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main sawblade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed: 1–140 m/min (servo motors) Longitudinal pusher carriage speed: 90 m/min Cross pusher carriage speed: 135 m/min Double shuttle carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed + 2 on the Multi-Pusher cross carriage) Cutting system for thin panels

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Dvopilna žaga OMS FC 330 R za les, aluminij - rabljena, po servisu Specifikacije: • stanje - rabljena, po servisu • proizvajalec - OMS • model - FC 330 R • glavni motorji - 2 x 2,2 kW • maks. dolžina reza - 302 cm • min. dolžina reza - 36 cm • maks. presek reza - 95 x 150 mm (pri pravem kotu) • maks. premer žagnega lista - 330 mm (trenutno nameščen 315 mm) • priključek za odsesavanje fi 60 mm • rezanje pod kotom od -45 do +45 stopinj (desno, levo) • navpične pritisne čeljusti na rezane kose Lodsy Inq Hspfx Aamead • teža - pribl. 600 kg • skupne dimenzije - 352 x 80 x 135 cm (d x š x v) Dodatne informacije: • prikazane fotografije prikazujejo dejansko stanje predmeta prodaje • možnost vklopa in preizkusa naprave na lokaciji • cena v oglasu ne vsebuje DDV in stroškov transporta Financiranje in transport: • organiziramo transport z vozilom MDD, kurirskimi podjetji ali zunanjimi prevozniki • omogočamo finančno podporo v obliki leasinga ali leasing kredita

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C123969, premer žaginega lista: 500 mm, največja hitrost vrtenja: 2.820 obr/min, skupna masa: 1.490 kg, nastavitev nagiba žaginega lista: 22 °, TEHNIČNI PODATKI Hitrost vrtenja: 2.820 obr./min Število žaginih listov: 2 Premer žaginih listov: 450 & 500 mm Kot žaganja: 22° - 90° Motor Moč motorja žage: 2,2 kW PODROBNOSTI O STROJU Teža: 1.490 kg Motor Laodpew Nvxysfx Aamsd Moč motorja žage: 2,2 kW Električni podatki Moč: 5,3 kW Tok: 13 A Napetost: 400/3 V Frekvenca: 50 Hz Opomba: Stroj bo na voljo od 01.12.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C123969, premer žaginega lista: 500 mm, največja hitrost vrtenja: 2.820 obr/min, skupna masa: 1.490 kg, nastavitev nagiba žaginega lista: 22 °, TEHNIČNI PODATKI Hitrost vrtenja: 2.820 obr./min Število žagin listov: 2 Premer žaginega lista: 450 & 500 mm Kot rezanja: 22° - 90° Motor Moč motorja lista: 2,2 kW PODROBNOSTI O STROJU Teža: 1.490 kg Motor Moč motorja lista: 2,2 kW Električni podatki Moč: 5,3 kW Tok: 13 A Napetost: 400/3 V Frekvenca: 50 Hz OPREMA Transportni trak za oblanke Opomba: Stroj je na voljo od 01.12. Laodsxwnhujpfx Aamod

Stanje: dober (rabljeno), Leto izdelave: 2000, I am selling a double mitre saw OMGA TR2A. Ledpfetwbcyex Aamsad Cutting length: 390 - 3000 mm Maximum cutting width: 170 mm Maximum cutting height: 90 mm Tilting heads: 0 ± 45° 2 horizontal + 2 vertical pneumatic material clamps 2 motors x 1.62 kW (2.2 HP) Good condition. Available immediately.

Stanje: novo, Leto izdelave: 2025, Modern, high-performance and universal double mitre saw for wood, aluminium and PVC profiles. Laedpfxoxta Tuo Aamjd Stock machine: Subject to prior sale - Large cutting capacity (165 mm cutting depth at the table) - Double cuts possible - Intermediate angles can be steplessly fixed - Pneumatic tilting as standard - Hydropneumatic saw feed, infinitely adjustable - Torsion-resistant machine bed - Tilting range for both units: 22.5° inwards, 90°, 135° outwards - Precision-ground saw table / saw bed plate - Direct position measurement system (magnetic sensor) in all models - JETTER drives and control systems - 15" industrial touch panel (IP65)

Stanje: novo, Leto izdelave: 2025, Universelle Doppelgehrungssäge für PVC, Aluminium und Holz. Tausende zufriedene Kunden weltweit sind sich einig: Die Qualität der WEGOMA DS-Serie ist in der Branche unerreicht. Das neueste Modell unserer DS-Reihe bietet eine höhere Schnittkapazität bei gleichbleibender Qualität und Präzision. Universal double mitre saw for PVC, aluminium, and wood. Thousands of satisfied customers worldwide agree: The quality of the WEGOMA DS series is unmatched in the industry. The latest model in our DS series offers higher cutting capacity while maintaining quality and precision. Maschine am Lager: Zwischenverkauf vorbehalten Machine in stock: Subject to prior sale • 190 mm Schnitttiefe am Tisch mit 550 mm Sägeblättern • Cutting depth of 190 mm at table with 550 mm saw blades • Zwischengrade stufenlos fixierbar • Intermediate angles can be continuously set • Pneumatische Schwenkung Lodpfxsxta Sqj Aamjad • Pneumatic tilting as standard • Hydropneumatischer Sägevorschub stufenlos regelbar • Hydropneumatic saw feed, infinitely adjustable • Verwindungsfreies Maschinenbett • Torsion-resistant machine frame • Schwenkbereich bei beiden Aggregaten: 45° nach innen, 90°, 135° nach außen • Tilting range for both units: 45° inwards, 90°, 135° outwards • Geschliffene/r Sägetisch / Sägeanlageplatte • Precision-ground saw table / saw support plate • Direktes Wegmesssystem (Magnetsensor) in allen Varianten • Direct position measuring system (magnetic sensor) available in all variants • JETTER Antriebe und Steuerung • JETTER drives and control systems • 15″ Industrie-Touchpanel (IP65) • 15″ industrial touch panel (IP65)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Stock machine: Subject to prior sale – Glass bead saw / double miter saw Exenso DS350 – 3,000 mm for wooden glazing beads, muntin bars, profile moldings, aluminum strips, etc. Ledpfow Exaasx Aamsad Swivel range 22.5° (inside) to 135° (outside) Movable right saw head. Saw blade holder Ø 350 mm Working length 3,000 mm - Includes 1 center support. - Pneumatic clamping of the units. - Exenso DS3 positioning control with touch panel – 15" display in dust-protected monitor housing. - 3-axis control: 1 longitudinal axis and 2 swivel axes. - Manual entry of cutting data - Processing of data from a cutting list (predefined data set) - Processing of measuring stick data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Includes control cabinet, motor, and software licenses. Accessories/Options: 1.2 723.0121 DS/ES saw blade for wood, 2 pieces 1.3 942.5997 DS pneumatic feed device, 1 set 1.4 942.5236 DS combined workpiece clamping, 2 sets 1.5 942.5241 DS350 grooved table supports, 1 piece 1.6 945.1022 DOCUMENTATION AND USER INTERFACE DEU or ENG

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Rabljeni stroj Leto izdelave: 2007 Informacije o izdelku: Maks. dolžina reza: 6.000 mm Maks. premer žaginega lista: 380 mm Območje zasuka žagine glave je brezstopenjsko nastavljivo od 0° do 45° levo in desno. Možni so rezi na notranjo in zunanjo mero. Zaskok pri 15°, 30° in 45°. Hidropnevmatski pomik žage za natančen rez, brezstopenjsko nastavljiv s hitrim pomikom. Vertikalne in horizontalne pnevmatske naprave za vpenjanje zagotavljajo optimalno fiksacijo profila. Elektronika E 111: Ljdpfx Aaoyu Hupsmoad Ročna nastavitev dolžine reza z digitalnim prikazom E 111. Preklop iz absolutne na verižne dimenzije. Shranjevanje dejanske vrednosti ob izpadu električnega omrežja. Tehnični podatki: Najmanjša dolžina reza: 520 mm Električni priklop: 400 V, 3~, 50 Hz Moč posameznega motorja: 3 kW Priklop stisnjenega zraka: 7 bar Priložena dodatna oprema: 1x fiksno delovno podlago

Stanje: dober (rabljeno), Double Mitre Saw Rapid DGS – Used, Fully Functional, Ready for Demonstration For sale is a Rapid double mitre saw DGS in fully functional, well-maintained used condition. The machine is immediately operational and can be demonstrated at any time. Features / Specifications: Lodpfx Aaoxzdviemjad Model: Rapid DGS Precision double mitre saw for aluminium, plastic, and, if required, light metal profiles Stable, robust construction Mitre cuts possible (both saw heads adjustable) Clean, technically flawless used condition Cutting length: 4 m Saw blade: 3700x3.6/3.0x30 Z=108TF negative Dimensions (LxWxH): 5 m x 1.20 m x 1.50 m Angle/degree: 45-90° Condition: The machine is in full working order. All functions can be tested live during inspection. Inspection & Collection: An inspection by appointment is possible. Collection by the buyer – loading assistance available if required; crane and forklift present. Price: Negotiable If interested or if you have any further questions, feel free to contact us!

Stanje: dober (rabljeno), Double Mitre Saw Elumatec DG 740/02 – used, fully functional, ready for demonstration For sale is an Elumatec Double Mitre Saw DG 740/02 in good, fully operational condition. The machine is immediately ready for use and can be demonstrated on site. Ljdpfxjxzdule Aamjad Technical Data / Equipment: Model: Elumatec DG 740/02 Double mitre saw for precise aluminium and plastic profiles Robust construction, accurate cutting guidance Both saw units swiveling / Mitre cuts possible Cleaned and well-maintained used condition Cutting length: 6 m Saw blade: 4420x3.8/3.2x30Z Z102 TFA Angle/degree: 45-90° Condition: The machine is in full working order and in a condition appropriate for its age. All functions can be tested live during an inspection. The machine was removed from production, cleaned, and is ready for demonstration in a warehouse until sold. Inspection & Collection: A non-binding inspection is possible by appointment. Collection by the buyer. Price: Negotiable If interested or if you have any questions, just get in touch!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, maximum aggregate spacing 3.3 m two motors of 2.2 kW each tilt adjustment of saw blades Lodsvby T Uspfx Aamoad adjustable cutting angle from -45° to +45° maximum blade diameter 330 mm pneumatic clamps blade speed 3765 rpm CE marking

Stanje: rabljeno, Mitre Cold Circular Saw BERG & SCHMID Type MKS 350 Year of manufacture: approx. 1980 Cutting capacity at 90° round: Ø 110 mm Cutting capacity at 90° rectangular: 160 x 90 mm Cutting capacity at 90° square: 95 x 95 mm Cutting capacity at 45° round: Ø 95 mm Cutting capacity at 45° rectangular: 120 x 90 mm Lsdpfx Aaoquzd Romjad Cutting capacity at 45° square: 80 x 80 mm Saw blade diameter max.: 350 mm Saw blade speed: 28 and 56 rpm Motor power: approx. 1.8 / 2.5 kW, pole-changeable Mains connection: 380 Volt, 50 Hz - Motor with 2 electrically selectable speeds - Stepless quick mitre adjustment up to 45° - Material vise with quick-action eccentric lever - Coolant device with electric coolant pump - Material stop: 350 mm - Saw blade with Ø 335 mm installed Floor space required (L x W x H): 1250 x 600 x 1200 mm Weight: 240 kg Good condition

Leto izdelave: 1985, stanje: dober (rabljeno), Offer 22556 Technical Data: Laodpfoimdlrex Aamod - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Max. cutting length: 3000 mm - Minimum cutting length at 90° and 45°: 335 mm - Cutting range: see attached diagram - Manual swivel range inward: 90° - 22.5° - Manual tilt range inward: 90° - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per cycle approx.: 64 l - Space requirements approx.: W 4500 x H 1950 x D 1600 mm - Weight approx.: 1400 kg - With: - Adjustable cutting length with positioning control - Positioning control renewed ca. 2002 by WOLFF - Saw unit can be swiveled and tilted for tall and wide profiles - Also suitable for compound/miter cuts

Stanje: dober (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 21100122-F, Offer 25108 Technical Data: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3400 rpm - Cutting capacity at 90° round: 120 mm Ljdpfx Aaewq N Swsmead - or flat: 105 x 105 mm - or: 180 x 70 mm - at 45° round: 110 mm - flat: 135 x 60 mm - Miter adjustment left and right: 45° - Saw head tilt adjustment for compound cuts to the left - Pneumatic vices - Discharge roller conveyor with length stop: 2000 mm - Feed roller conveyor: 3000 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 600 x H 1730 x D 1200 mm - Weight approx.: 180 kg