Potisna optimizacijska kotna žaga

SALVADOR SuperPush 250

Stanje: novo, Brugger FMP 225 Forestry Mulcher – New, 225 cm Working Width, Ideal for Heavy Mulching Tasks! The Brugger FMP 225 is a robust forestry mulcher designed for use in agriculture, forestry, and on fallow land. Featuring a double belt drive, 36 tungsten carbide-tipped hammers, and hydraulic equipment, it is ideal for tractors from 110 HP upwards – reliable, powerful, and built for tough jobs. Technical Data – Brugger FMP225: Working width: 225 cm Drive: Double belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Power requirement: 110 – 160 HP Own weight: approx. 1,800 kg Attachment: Three-point linkage CAT II / III Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with hammers) Hammers: 36 pcs., tungsten carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-stage adjustment) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic couplings: 2x double acting (1x for rear door, 1x for counter bar) Features: Hydraulic rear flap & counter bar Lhsdpjwhyzwofx Adksd Included: PTO shaft Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = €10,900 Brugger FMP200 200cm – 32 hammers, 1,700kg = €11,900 Brugger FMP225 225cm – 36 hammers, 1,800kg = €12,900 ----- Contact us for a tailored offer!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Hidravlična lestev za okrogle hlode, primerna za premer hlodov od 7 cm do 66 cm. Lhedpjv N Eiqefx Adked

Stanje: novo, Bester Preis: 4499 EUR (EXW Jonava, Litauen) Abmessungen des Schiebeschlittens: 2200 x 375 mm Max. Schnittlänge: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl Hauptsäge: 4.500 / 6.000 min⁻¹ Hauptsägewelle Durchmesser: 30 mm Sägeblatt schwenkbar: 0–45° Sägenhub, Heben und Senken mit elektrischer Steuerung Hauptmotor: 5,5 kW Vorschnittsägeblatt Durchmesser: 120 mm Drehzahl Vorschnittsäge: 7.000–8.000 min⁻¹ Vorschnittsägewelle Durchmesser: 20 mm Lhedpsdnxydjfx Adked Vorschnittmotor: 1,1 kW Gewicht: 700 kg * Beim Einsatz eines 400-mm-Sägeblatts muss das kleinere Blatt entfernt werden. * Reduzierte Sägeblätter dürfen nur mit maximal 350 mm Hauptschutz verwendet werden.

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Lhedpfxjwtgcxs Adked Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fusing: 25 A Condition: used

Stanje: potreben popravila (rabljeno), Leto izdelave: 1999, Funkcionalnost: nefunkcionalno, Machines for restoration Ljdpfx Aolxqk Rjdkshd

Stanje: novo, Leto izdelave: 2026, Oy Foudila Ab je podjetje iz Kaskinena na Finskem z več kot 45-letnimi izkušnjami na področju opreme za ravnanje z lesom. Zadnjih 15 let smo aktivni tudi v paletni industriji, kjer smo razvili številne stroje za žebljanje, avtomatsko podajanje in zlaganje lesa. Proizvajamo tako standardne stroje kot tudi prilagojene rešitve glede na potrebe kupcev. LNM3500 je prilagodljiv, kompakten in učinkovit pnevmatski stroj za žebljanje, namenjen izdelavi nog za proizvodnjo palet. Uporabniku prijazen program omogoča zelo hitro preklapljanje nastavitev, stroj pa lahko shrani parametre za več kot 100 različnih tipov nog. Opremljen je s tremi Bostitch žebljičniki z nabojniki za jumbo kolute in indikatorji polnosti. Možna je izdelava nog z 2 do 30 bloki na nogo. Stroj je opremljen z veliko kaseto za deske ter zaščitnim pokrovom za dušenje zvoka in varnost. Upravljanje poteka preko 10" zaslona na dotik in Beckhoff krmilnega sistema. Stroj je lahko dodatno opremljen z optimiziranim rezalnikom blokov ter avtomatskim podajanjem blokov v stroj za žebljanje. Rezalnik blokov je mogoče namestiti na zadnjo ali stransko stran stroja. Dimenzije za standardni stroj: - Deske: dolžina 600–3500 mm, širina 60–125 mm, višina 16–28 mm - Bloki: dolžina 60–150 mm, širina 60–125 mm, višina 50–100 mm Zmogljivost: - 21 blokov/minuto Dimenzije stroja (brez rezalnika blokov): - Dolžina 9000 mm, širina 1000 mm, višina 1900 mm Lhodsi Hkqmjpfx Adksd Stroj ima oznako CE. Stroj za žebljanje nog je lahko dodatno opremljen z avtomatskim zlagalnikom končnih nog. Za več informacij, slike in videoposnetke nas prosimo kontaktirajte.

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), -Usable internal dimensions: D=970mm H=540mm (other sizes available on request) Lhsdpfx Adsf A Nq Uoksd -Touch screen -Spray pressure: 3 bar -Basket load capacity: 200kg -Tank volume: 210L -Standard equipment: • Oil skimmer • Frame, lid and housing made of stainless steel • Electrically operated, timer-controlled steam extraction • Reinforced stainless steel basket • Stainless steel electric pump • Stainless steel filter on the pump suction side • Stainless steel heating elements • Mechanical basket rotation with geared motor • Electrical system IP 65, PLC control (DGT V4) • Automatic water inlet • Safety limit switch monitors lid opening • Stainless steel spray nozzles • Weekly timer for heating and oil separator • Hour meter

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. Ledpfx Adsdfgg Ijkshd B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Proizvajalec - OMES Lhodjwwiv Aspfx Adked Kapaciteta - 1400 palet/izmeno Leto - 2002 Linija je trenutno razstavljena

Stanje: rabljeno, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – Semi-automatic under-table crosscut saw Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm When cutting stacked boards, max. height: 100 mm. The framework is fully constructed from thick-walled, reinforced steel with complete surface coating. Sturdy floor mounting system with flanged steel feet for fixing hole. Two-handed safety cut control positioned ergonomically. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic controller. Maximum weight balancing system for durability. Shock-absorption system. Independent pneumatic adjustments for adaptation to various processing tasks. Durable and easily replaceable saw blade setting bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic top workpiece hold-down with electro-pneumatic control. Movement system utilizes innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must be equipped as standard with at least 1 meter long infeed and outfeed roller tables. Technical Data: ----- Max. crosscutting dimension: 220x125, 260x100, 285x80, 310x50 mm Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: Carbide (HM) Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Dust extraction port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V / 50 Hz, 3-phase Working table height: 900 mm +/- 20 mm Color finish: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide. 2 m roller conveyor (left side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm each ----- Total price ex works: on request! ----- Images and video not original, show identical model. Other options such as extended infeed/outfeed tables or stop systems available on request! Lsdpjv Uq Tlofx Adkehd (Technical data as per manufacturer, subject to change without notice!)