Rivelica Newform 250 nakup rabljenega (10.600)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Eislingen/Fils
489 km
Dvostolpna stiskalnica - hidravlična
MÜLLERSD 250/200.1.2
Pokliči
Stanje: rabljeno, Leto izdelave: 1977, Tlak 250 t
Razdalja med stebri 1110 mm
Hod 250 mm
Razdalja med mizo in batom, velik zgornji hod, zgoraj nastavljivo 500 mm
Površina mize 1100 x 900 mm
Višina mize nad tlemi 950 mm
Stranski prehod med stebri 690 mm
Površina bata 1100 x 900 mm
Količina olja 730 l
Bljdpfx Ajyx Im Aogteg
Pogonska moč 56,0 kW
Prostorske mere (ŠxGxV) 2,3 x 1,55 x 3,96 m
Z oljnohidravličnim pogonom, tlakovno/časovno in hodno odvisno krmiljenje, dušenje udarca pri rezanju, omejevalnik globine
Temeljna jama ni potrebna
Mali oglas
Eislingen/Fils
489 km
Dvostolpna stiskalnica za vlečenje - Hidravlična
MÜLLERSDZ 250/200.3.1 (UVV)
Pokliči
Stanje: rabljeno, Leto izdelave: 1980, Tlak 250 t
Razdalja med stebri 1125 mm
Hod 250 mm
Razdalja miza/bata, velik hod zgoraj, nastavitev zgoraj 800 mm
Površina mize 1100 x 900 mm
Sila vlečne blazine v mizi 63 t
Hod vlečne blazine v mizi 100 mm
Površina vlečne blazine 700 x 400 mm
Višina mize nad tlemi 960 mm
Stranski prehod med stebri 700 mm
Površina bata 1080 x 900 mm
Vsebina olja 1000 l
Pogonska moč 35,0 kW
Teža 23,0 t
Prostorske zahteve (ŠxGxV) 2,5 x 2,3 x 4,5 m
Blodpfx Agsyx Il Eetsg
Dovoljena za ročno polaganje po nemških predpisih o varnosti pri delu (UVV)
s hidravličnim oljnim pogonom, možnostjo krmiljenja tlaka/časa in poti, svetlobno zaveso (Sick), hidravlično vlečno blazino v mizi, dušenjem reza
Ni potrebna temeljna jama
Lahko se ponudi brez vklopa ali alternativno z novo krmilno enoto Siemens S7-1500 F
Mali oglas
Eislingen/Fils
489 km
Ravnalnik
BAD SALZUNGENMAR 250/2
Pokliči
Stanje: rabljeno, Leto izdelave: 1984, Širina materiala: 250 mm
Debelina materiala: 0,2 - 2,0 mm
Število ravnalnih valjev: 7
Premer ravnalnih valjev: 60 mm
Vhodna višina: 1250 mm
Hitrost: 5 - 30 m/min
Pogon: 2,2 + 1,3 kW
Teža: 0,65 t
Dimenzije (ŠxGxV): 1,05 x 1,25 x 1,5 m
POSEBNA AKCIJA
kot stoji in leži
BREZ zagona / BREZ dodatnih del
Blsdpfx Asvuk Sbogtsg
prosto naloženo na tovornjak

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Hilden
815 km
Tovorno vozilo s ravno platformo in ponjavo
Iveco120-250 E6 Pritsche-Plane LDW LBW AHK
Pokliči
Stanje: rabljeno, prevoženi kilometri: 212.170 km, moč: 184 kW (250,17 KM), prva registracija: 08/2018, vrsta goriva: dizel, lastna masa: 6.740 kg, največja dovoljena obremenitev: 5.250 kg, skupna masa: 11.990 kg, konfiguracija osi: 4x2, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, prostornina tovornega prostora: 45 m³, dolžina tovornega prostora: 7.390 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.490 mm, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, kabina, klimatska naprava, nadzor oprijema, računalnik na krovu, spojka prikolice, tempomat, zapora diferenciala, Iveco ML 120-250 E6 Ponjava na pomik
- Ponjava na pomik
- Bočne stranice
- Dimenzije (DxŠxV notranje): 6,39 x 2,48 x 2,42 m
- Samodejni menjalnik
- Motorna zavora
- Klimatska naprava
- Prilagodljivi tempomat
- Asistent za ohranjanje smeri
- Nosilnost: 5.250 kg
- EURO 6
Bjdpfxsy Igklj Agtolg
- Listnato/zračno vzmetenje
- Vlečna kljuka
- Dvižna nakladalna ploščad
- Pnevmatske gume: 285/70R19,5
Zelo dobro ohranjeno vozilo! Nemško vozilo! Izvozna cena.
Yourtrucks Group
Skupina Yourtrucks vzdržuje poslovne odnose po vsem svetu. Tako nakup kot prodaja potekata čezmejno, zato so v naših oglasih vedno navedene izvozne cene, saj so neodvisne od kraja uporabe.
Družba Yourtrucks GmbH zbira vsebine na tej spletni strani z največjo skrbnostjo in jih redno posodablja. Te informacije so nezavezujoče splošne narave in ne nadomeščajo podrobnega individualnega svetovanja pred nakupom. Odločilne so le določbe iz kupoprodajne pogodbe. Pridržujemo si pravico do sprememb, napak, tipkarskih napak in predprodaje.
Veljajo izključno naši splošni pogoji poslovanja.
Jeziki
- Govorimo angleško
- Govorimo francosko
- Govorimo arabščino
- Govorimo poljsko
- Govorimo špansko
- Govorimo portugalsko
- Govorimo italijansko
Mali oglas
Hilden
815 km
Hladilni tovornjak
DafLF 250 E6 Carrier Supra Strom Tür + LBW Kamera
Pokliči
Stanje: rabljeno, prevoženi kilometri: 279.709 km, moč: 184 kW (250,17 KM), prva registracija: 02/2016, vrsta goriva: dizel, lastna masa: 7.580 kg, največja dovoljena obremenitev: 7.820 kg, skupna masa: 15.400 kg, konfiguracija osi: 4x2, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, prostornina tovornega prostora: 39 m³, dolžina tovornega prostora: 6.940 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.290 mm, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, hladilna enota, klimatska naprava, nadzor oprijema, računalnik na krovu, tempomat, zapora diferenciala, Yourtrucks Group
Blodpfxevih Nto Agteg
The Yourtrucks Group maintains business relationships worldwide. Both procurement and sales extend beyond national borders, which is why you will generally find the export price in our listings; this price applies regardless of the place of use.
Yourtrucks GmbH compiles the content of this website with the utmost care and ensures it is regularly updated. This information is intended as non-binding general information and does not replace detailed individual advice when making a purchasing decision. Only the terms specified in the purchase contract are binding. Subject to changes, errors, typographical mistakes, and prior sale.
Only our general terms and conditions apply.
Languages
- We speak English
- On parle français
- ?? ????? ?? ????
- Mówimy po polsku
- Hablamos español
- Falamos português
- Parliamo italiano
Mali oglas
Nemčija
650 km
Stroj za oblikovanje, polnjenje in zapiranje vreč
AquariusVBM 250
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Na voljo je vertikalni stroj za pakiranje vrečk Aquarius. Razpon širine vrečk: 80mm-250mm, največja dolžina vrečke: 450mm, zmogljivost pakiranja: pribl. 140 vrečk/min, material vrečke: folija, izdelek za pakiranje: sipki/kosovni izdelki. Ogled na lokaciji je možen.
Bsdpfoy Equgox Agtjlg
Mali oglas
Wietmarschen
902 km
Skladiščna platforma
Lagerbühne auf Wunschmaß !Traglast 250 - 1000 kg/qm
Pokliči
Stanje: novo, Mezzanine floors custom-made to your specifications!
Load capacity: 250 - 1000 kg/m²
Why choose mezzanine floors from BLT Lagertechnik?
- We are a family business: Our goal is long-term partnership.
- We are the specialists: We accommodate all spans, load requirements, and levels of complexity.
- We care: Our cold-formed system offers the most sustainable solution available.
Bedsy Izhrepfx Agtolg
Scope of delivery:
- Columns
- Main beams
- Secondary beams
- Flooring
- Fasteners, assembly and installation instructions
Options available upon request:
- Impact protection
- Guardrails
- Transfer stations
- Stairs
- Floor anchors
- Steel structure can be powder-coated in your preferred RAL color (Standard RAL7016)
Transport:
Delivery can be arranged through our partner freight companies on request. Costs depend on your postal code.
Assembly:
Our qualified staff are available to professionally assemble and dismantle your equipment as needed.
Our recommendation:
Let us know your requirements.
We are happy to assist you with your projects, from planning and ordering through to installation.
Mali oglas
Wietmarschen
902 km
Konzolna polica
ca. 3,15 lfm. Kragarmregal LanggutregalH: 250 cm 140 kg/Arm META Multistrong
Pokliči
Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 140 kg, višina police: 2.500 mm, skupna dolžina: 3.150 mm, skupna širina: 810 mm, skupna višina: 2.500 mm, razmak osovin: 1.030 mm, nosilnost na stojalo: 560 kg, approx. 3.15 m cantilever racking, height: 250 cm, 140 kg/arm META Multistrong
Specifications:
- Height: approx. 250 cm
- Depth: approx. 81 cm
- Length: approx. 315 cm
- Cantilever arms: approx. 60 cm
- Axle spacing: 103 cm
- NEW STOCK immediately available from warehouse.
- 140 kg load capacity per arm
- 1120 kg load capacity per upright
- Uprights in RAL5010 (gentian blue).
- Cantilever arms in RAL5010 (gentian blue).
- Arms are hooked in and secured with locking pins.
- Arms adjustable in 70 mm increments.
- Levels: base + 4 storage levels (5 storage levels in total)
Racking consists of:
- 04 x uprights incl. base, approx. 250 cm, made of IPE120 profile
- 16 x cantilever arms, approx. 60 cm, made of rectangular 40 x 30 mm profile
- Includes all necessary connecting elements and bolts
-- Immediately Available --
Price:
€1,525.00 net
€1,814.75 gross
You will receive an invoice with VAT shown separately.
Accessories such as floor anchors, collision guards, etc. can also be purchased from us.
Transport:
Delivery can be arranged upon request via our partner freight forwarder. Shipping costs dependent on postal code.
Installation:
Blsdpfx Ajy Izdyjgtjg
Our trained staff are available to assist you with the professional assembly and disassembly of your facility as required.
Our recommendation:
Let us know your requirements...
We are happy to assist you with your projects from planning through to ordering and installation.
Mali oglas
Wietmarschen
902 km
Modularna polica
1,30m SSI Schäfer R3000 Fachbodenregalinkl. 20 Fachtrenner , 250 x 50 cm
Pokliči
Stanje: pripravljen za uporabo (rabljen), This SSI Schäfer R3000 shelving rack starter unit with additional dividers is a particularly robust, proven storage solution designed for professional use in warehouses, workshops, companies, archives, and on-site storage. This high-quality, galvanized boltless shelving system is ideal for the organized and secure storage of boxes, small parts, containers, and other warehouse goods. With a shelf load capacity of up to 150 kg per shelf and a flexible 5 cm slot pattern, this readily available rack system offers a powerful and versatile solution for a wide range of storage requirements. This version also includes 20 used dividers for SSI Schäfer R3000 shelving racks.
This ad serves as a reference for available configurations with additional shelf dividers – if you are interested or have questions, please contact us directly.
PRODUCT DETAILS:
- Height: approx. 249 cm
- Depth: approx. 50 cm
- Length: approx. 130 cm
- Shelf load: 150 kg per shelf
- Shelves: approx. 128.5 x 50 cm
- Color / finish: galvanized
- Upright frames: approx. 249 x 50 cm, pre-assembled
- Shelf pitch: 5 cm
- Version: boltless system for quick assembly
- Availability: from stock Wietmarschen
- Execution: uprights and shelves are used goods
- Manufacturer: SSI Schäfer R3000
- Supplement: 20 x divider / shelf partition
- Divider model: TRF4517
- Divider dimensions: approx. 17.5 cm high / total height approx. 20.5 cm / width approx. 46.5 cm
- Divider version: used, galvanized
- Other quantities available!
---- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS ----
SCOPE OF DELIVERY:
- 02 x upright frames (approx. 249 x 50 cm), pre-assembled
- 06 x shelves (approx. 128.5 x 50 cm)
- 01 x cross bracing for reinforcement
- 20 x divider / shelf partition SSI Schäfer R3000 (TRF4517)
Bledpfxjy Iwyks Agtjg
PRICE:
€190.00 net
€226.10 gross
You will receive an invoice with VAT shown separately.
DELIVERY, ASSEMBLY & INSPECTION:
- Nationwide delivery throughout Germany by our partner freight carrier – shipping costs depend on your postal code
- Professional assembly and disassembly by trained teams optionally available
- Shelf inspections according to DIN EN 15635 by certified inspectors
- Inspection of existing heavy-duty shelving from other manufacturers also possible
PLANNING & CONSULTATION:
Our planning department will gladly prepare a non-binding quotation tailored to your requirements. Whether new construction, modification, or expansion – we offer expert advice on your shelving configuration.
SHOWROOM:
You are welcome to visit our showroom! Experience our pallet racks, storage racks, and other solutions on site. Many systems are assembled and can be viewed directly. Our specialist advisors are available for questions and individual consultation – we look forward to your visit!
Still haven’t found what you’re looking for?
Visit our website for a quick overview of our many offers and product variations!
INTERESTED OR HAVE QUESTIONS?
Contact us easily by message or phone. You can find our phone number on our company page. ☎️
We are available by phone Monday to Friday, 8:00 am – 4:00 pm.
Alternatively, send us a message with your name and number and we will get back to you as soon as possible.
Mali oglas
Kirchheim bei München
332 km
Prikolica z ravnim naslonom in ponjavo
MÜLLERSD 250 /200.1. 2
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 1977, Pressure: 250 t
Clearance between uprights: 1120 mm
Stroke: 250 mm
Distance table/ram, max. stroke up, max. adjustment up: 500 mm
Table size: 1100 x 900 mm
Table height above floor: 950 mm
Lateral upright passage: 700 mm
Ram area: 1100 x 900 mm
Downward speed: mm/s
Upward speed: mm/s
Working speed: mm/s
Oil capacity: 730 l
Drive power: 56 kW
Weight: 25 t
Blsdpfx Agsx Ug Dotsg
Space requirement (W x D x H): 2.3 x 1.55 x 3.96 m
Additional information:
Equipped with electro-hydraulic drive, hydraulic (20) and electric control system according to UVV regulations, light curtain (Sick), upper and lower stroke limitation, pressure- and position-dependent control, shear-blow damping, short-stroke control, new control system (Mitsubishi), safety controller (PNOZ Multi), screen control with touch-screen, control cabinet
Mali oglas
Juszczyn
530 km
Profilna rezkalna stroj
Bartezaghi2BE 250
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prečna rezkalka Bartezaghi 2BE 250
Blsdpfxsyyi E No Agtog
Dolžina vretena: 240 mm
Maksimalna višina rezkanja: 250 mm
Premer vretena: 40 mm
Hitrost vretena: 5600 vrt/min
Moč motorja: 9 kW
Pnevmatski pritisk materiala
Upravljanje s kontrolne plošče
Mali oglas
Schwabach
460 km
štirihodni nastavek
RÖHM315 + 250 mm
Pokliči
Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 315 mm in 250 mm vpenjalna glava, s centralnim in posamičnim nastavljanjem vpenjalnih čeljusti,
Bjdey Agmvspfx Agtjlg
Mali oglas
Gera
566 km
Kiper prikolica
MartzKipper 250/2 C S 2T
Pokliči
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 468 kg, največja dovoljena obremenitev: 1.532 kg, skupna masa: 2.000 kg, dolžina tovornega prostora: 2.530 mm, širina tovornega prostora: 1.640 mm, višina nakladalnega prostora: 300 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, MARTZ Tipper 250/2 C S 2T
NEW VEHICLE
Internal dimensions: 253 cm x 152 cm
Side wall height: 30 cm
Loading platform height: 80 cm
Gross vehicle weight: 2000 kg
Payload: 1532 kg
Braked tandem trailer
Overrun brake and handbrake by KNOTT
2x axles with 1350 kg brakes each
Low chassis
Fully welded, hot-dip galvanized steel frame
Aluminum side walls with tension locks
Folding and removable on all sides
Galvanized steel floor
Jockey wheel
6 lashing rings
Reinforced 13'' C-type tires with steel valves
M+S tires
Net/rope hooks on the frame
13-pin plug
Front marker lights
Rear lights with reversing light, fog light, and triangular reflectors
Upper frame mounted on rubber bearings
Manual pump with stowable handle
Safety lock for upper frame
OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 ONWARDS
- 100 km/h equipment (shock absorbers)
Bledpfsw A I Etex Agtsg
- Spare wheel with holder
- Loading ramps
- Folding crank rear supports
- Complete LED lighting
- Anti-theft lock
- Fine- or coarse-mesh net
- H-frame
- Mesh side extensions in various heights, also with closed design
- Additional side walls, steel or aluminum, 30 cm high with tension lock
- Flat cover, with or without bows
- High cover, 140 cm
Additional accessories available upon request!
Plus shipping to Gera and vehicle registration certificate: €200 net
Images are for reference and may show optional extras subject to surcharge.
Haven’t found the right trailer yet?
We have 50–100 vehicles in stock, available immediately for collection.
Workshop open weekdays from 8:00–17:00 for all types of repairs.
Specialist in axle repairs, including for caravans.
We also stock a wide range of spare parts and accessories for trailers from various manufacturers.
Visit us online or come by in person!
Mali oglas
Gera
566 km
Avtomobilska prikolica
MartzHochlader 250 1,3T
Pokliči
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 289 kg, največja dovoljena obremenitev: 1.011 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.545 mm, širina tovornega prostora: 1.510 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, MARTZ High Loader 250 1.3T
NEW VEHICLE
Internal dimensions: 254cm x 151cm
Gross weight: 1300 kg
Payload: 1011 kg
Braked single-axle high loader
1300 kg KNOTT axle with overrun brake, automatic reversing function, and handbrake
Bolted and galvanized steel frame
Galvanized steel side walls, 40cm high
15mm thick, robust and anti-slip phenolic plywood floor
13-pin electrical system
Jockey wheel
13-inch M+S tires
Multiple lashing points
Front position lights
Rear lights with reversing light, rear fog light, and triangle reflectors
2x wheel chocks
Optional accessories:
Bledpoww A Hbefx Agteg
- 100 km/h upgrade
- Rear support stands
- Exchange steel side walls for aluminum side walls
- Side wall extensions in steel or aluminum
- Integrated loading ramps in steel or aluminum
- Mesh superstructure
- H-frame
- Motorcycle rail
- Flat cover with or without hoops
- High cover
- Coarse- or fine-mesh net
- Spare wheel with holder
More accessories available on request!
Images are for illustrative purposes and may show optional equipment at extra cost.
Plus vehicle registration document and freight to Gera 150 € net
Still haven’t found the right trailer?
We have 50-100 vehicles in stock and ready for immediate collection.
The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs.
Specialist in axle repair, also for caravan trailers.
Large selection of rental trailers available.
We also offer a wide range of spare parts and accessories for trailers of all manufacturers.
Get advice by phone, visit our website, or come by directly.
Mali oglas
Gera
566 km
Avtomobilska prikolica
MartzHochlader 250/2 C 2T
Pokliči
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 364 kg, največja dovoljena obremenitev: 1.636 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.545 mm, širina tovornega prostora: 1.510 mm, višina nakladalnega prostora: 400 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, MARTZ High Loader 250/2 C 2T
NEW VEHICLE
Internal dimensions: 254cm x 151cm
Side wall height: 40cm
Bjdpjww A Dtofx Agtelg
Loading platform height: 71cm
Gross vehicle weight: 2000kg
Payload: 1636kg
Braked tandem high loader
Overrun and hand brake by KNOTT
2x 1000kg axles with automatic reverse function
Bolted and hot-dip galvanized steel frame
Galvanized steel side walls with safety latches
Drop-side, fold-down and removable on all sides
15mm thick, non-slip and robust phenolic plywood floor
Jockey wheel
6 lashing eyes
13" tyres
M+S (Mud & Snow) tyres
Net/rope hooks on frame
13-pin plug
Front marker lights
Rear lamps with reversing light, fog light (NSL) and triangular reflectors
2x wheel chocks
OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026
- 100 km/h equipment (shock absorbers)
- Spare wheel with holder
- Integrated loading ramps, aluminium or steel
- Foldable crank rear supports
- Anti-theft device
- Fine or coarse mesh net
- H-frame
- Replacement of steel side walls with aluminium side walls
- Mesh sides in various heights, also closed
- Extension side walls aluminium or steel
- Flat cover with or without hoops
- High cover 140cm
- Automatic jockey wheel
More accessories available on request!
Plus freight to Gera and vehicle registration document €150 net
Images are for illustration purposes and may show optional accessories at extra cost.
Haven't found the right trailer yet?
We have 50-100 vehicles in permanent stock, available immediately for pick-up.
Our workshop is open weekdays from 8:00 to 17:00 for all types of repairs.
Specialists in axle repair, including for caravans.
Wide range of rental trailers.
We also have a comprehensive selection of spare parts and accessories for trailers from all manufacturers.
Mali oglas
Lurago D'Erba - Co
448 km
Kombi z visokim stropom
FordCustom 250 Van L1 H1 - Euro 6
Pokliči
Stanje: rabljeno, prevoženi kilometri: 262.100 km, moč: 77 kW (104,69 KM), prva registracija: 02/2017, vrsta goriva: dizel, skupna masa: 2.500 kg, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, dolžina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.300 mm, Leto izdelave: 2017, - Used Truck: Ford Custom 250 Van Entry. - Registration: 02/2017, Engine: 2.0 TDCi 105hp Euro 6, 6-speed gearbox, Mileage: 262,100 km. - 3-seater van / L1 H1, Load compartment dimensions: 2,550 x h. 1,300 mm. Bulkhead with sliding panel for long loads (530 mm), Load floor and half-height side wall lining. - Equipped with: Air conditioning, Radio-Bluetooth with USB, Central locking, On-board computer, Driver airbag, Spare wheel. - Bodywork in fair condition (slight dent on right front fender), Interior in good condition, Mechanically sound, Valid MOT until February 2027, Tyres at 90% tread. - Single owner vehicle.
CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Como Province), Lombardy.
Opening hours:
Monday to Friday: 8.30 am / 12.15 pm - 2.00 pm / 7.00 pm
Saturday: 8.30 am / 12.00 pm - 2.00 pm / 5.00 pm
Bsdjyz Iktepfx Agtolg
- Certified mileage. - Test drives available by appointment. - Ownership transfer handled on site. - Custom financing options available.
Carlo Mauri Srl declines all responsibility for any involuntary discrepancies in this listing, which does not represent any contractual commitment. Prices are exclusive of VAT and registration fees.
Mali oglas
Madžarska
653 km
Krauss Maffei 250 - 1000 CX
KraussMaffei250 - 1000 CX
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 44.678 h, vpenjalna sila: 2.500 kN, This hydraulic injection moulding machine, Krauss Maffei 250 - 1000 CX, was manufactured in 2017. It features a clamping force of 2,500 kN and a maximum mould weight of 3,430 kg. The machine is equipped with an LRX 150 linear robot for enhanced automation. Consider the opportunity to purchase this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details.
• Tie bar spacing (H x V): 630 x 630 mm
• Platen dimensions: 995 x 1,050 mm
• Minimum mould installation height: 330 mm
• Distance between platens: 1,150 mm
• Max. total mould weight: 3,430 kg (fixed: 1,715 kg / moving: 2,286 kg)
• Core-pull control: 4 units (2 x fixed platen / 2 x moving platen)
• Shut-off nozzle: 4-fold hydraulic cascade
• Injection unit 1 (Code 1000):
• Screw diameter: 55 mm
• Injection pressure: 1,904 bar
• Shot volume: 523 ccm
• Shot weight (PS): 476 g
• Injection rate (PS): 404 g/s
Bljdjyhbq Eepfx Agtjg
• Wear-resistant unit: Yes (ZE 33.00)
• Printer interface: Yes
• Condition: Well-maintained and serviced
Additional equipment
• Automation: Linear robot LRX 150 with B/C-axis combination (includes KM LRX 150 linear robot)
• Hot runner controller: 12 zones
• Cooling: 4 x HB 100
Mali oglas
Avstrija
226 km
Stroj za rezanje z vodnim curkom
KK KletzerCNC 3 Achsen 3000 x 2000 x 250 mm
Pokliči
Stanje: novo, x-axis travel: 3000 mm
y-axis travel: 2000 mm
z-axis travel: 250 mm
Pump power for flushing: 37 kW
Control system: Siemens PLC touch screen, directly usable DXF files
Output pressure: max. 5500 bar
Abrasive feed system for waterjet cutting machines – fill weight 350 kg
OMAX vacuum sensor to monitor abrasive supply to the nozzle
Sensor for monitoring pump pressure
In waterjet cutting, water is compressed to pressures of up to 5500 bar. Depending on the requirement and the workpiece, this is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. As the waterjet technology processes materials without heat input, no deformations occur.
By adding an abrasive, waterjet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible manufacturing allows for both vertical and angled cuts. We are happy to accept your individual CAD data. Waterjet technology offers great advantages for industry, trades, and custom prototype production. It also scores points in terms of environmental impact, as the waterjet process operates dust- and steam-free and is material-efficient.
Waterjet Cutting: Sample Gallery
What already sounds impressive in theory is even more remarkable on the finished object. We have compiled a selection of images to demonstrate our capabilities with waterjet cutting. Browse through our sample gallery to get an impression of the possibilities offered by this modern machining process. Waterjet will also find the right solution for your project!
Advantages
- No deformations in the cut area
- Cutting without thermal influence
- Material-saving
- High precision: +/- 0.1 mm
- Cutting area: x = 3010 mm; y = 2010 mm; z = 250 mm
- Flexible manufacturing
- Vertical and angled cuts
- Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM
- Environmentally friendly, steam- and dust-free
We cut everything
All materials formed to shape:
- Aluminum
- Steel
- Brass
- Copper & bronze
Bedjhqnl Topfx Agtjlg
- Other precious metals
- Glass
- Granite & marble
- Tiles
- Composites
- Promat cutouts
- Rubber
- Plastics
- Plexiglass
Optional:
Oil cooler ..... €10,725.00
Water filter system..... €1,430.00
Sludge extraction system ..... €10,725.00
Professional water treatment system..... €10,725.00
An oil cooler must be present during commissioning!!!
Necessary for operation longer than 1 hour.
Further videos:
Mali oglas
Avstrija
226 km
Stroj za rezanje z vodnim curkom
KK-IndustriesCNC 3 Achsen 4000 x 2000 x 250 mm
Pokliči
Stanje: novo, x-axis travel: 4000 mm y-axis travel: 2000 mm z-axis travel: 250 mm
Pump output for flushing: 37 kW
Control: Siemens PLC touch screen, direct import of usable DXF files
Max. output pressure: 5500 bar
Abrasive delivery system for waterjet cutting machines – fill weight 350 kg
OMAX vacuum sensor for monitoring abrasive feed to the nozzle
Sensor for monitoring pump pressure
In waterjet cutting, water is pressurized up to 5500 bar. Depending on the requirements and workpiece, it is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. Since the waterjet process works without heat input, material deformation is avoided.
By adding abrasive, waterjet cutting achieves maximum precision with tolerances of +/- 0.01 mm. Our flexible production enables both vertical and bevel cuts. We are happy to receive your custom CAD files. Waterjet technology provides significant advantages for industry, trade, and custom prototyping. It is also environmentally friendly as waterjet cutting operates dust-free and steam-free, while also conserving material.
Waterjet cutting: example gallery
What already sounds impressive in theory is even more striking in the finished product. We have compiled a selection of images to demonstrate our capabilities in waterjet cutting. Click through our sample gallery to see what is possible with this modern processing technology. Waterjet will find the ideal solution for your application!
Advantages
- No deformation in the cutting area
- Cutting without thermal input
- Material saving
- High precision: +/- 0.1 mm
- Cutting area: x = 4010 mm; y = 2010 mm; z = 250 mm
- Flexible manufacturing
- Vertical and bevel cuts
- Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM
- Environmentally friendly, dust- and steam-free
Bedjd Ab Uuopfx Agtolg
We cut everything!
All materials shaped, including:
- Aluminium
- Steel
- Brass
- Copper & bronze
- Other precious metals
- Glass
- Granite & marble
- Tiles
- composites
- Foam material cuts
- Rubber
- Plastics
- Plexiglas
Optional:
Oil cooler € 10,725.00
Water filtration system € 1,430.00
Sludge extraction system € 10,725.00
Professional water treatment system € 10,725.00
An oil cooler must be present during commissioning!!!
Operation for longer than 1 hour is only possible with an oil cooler.
Mali oglas
Hannover
791 km
Stroj za brizganje
KraussMaffeiKM 250-1000 CX
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, obratovalne ure: 65.850 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61013689, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, razmak između stupova: 630 mm, delovna prostornina: 432 cm³, tlak vbrizgavanja: 2.304 letvica, injekcijska masa: 393 g, Oprema: dokumentacija / priročnik, Here we, as a dealer in injection molding machines, are offering the following well-maintained used injection molding machine:
Of course, we are also actively purchasing well-maintained injection molding machines from the year 2010 onwards.
We have been a major dealer in used injection molding machines for over 25 years.
Current Note – Tax Information and Advantage for Used Machinery:
As of 01/07/2025, used machines can also be subject to a special depreciation allowance of 30% per year for tax purposes. In addition to the lower purchase price compared to new equipment, you may claim the same depreciation amounts as for new machines.
Keyword: Growth Booster (§ 7 paragraph 2 EStG-E)
Currently available in our tested warehouse in Hanover:
Manufacturer: Krauss Maffei
Model: KM 250 1000 CX
Bedpfx Ajxqhuuogtolg
Control System: MC5
Year of manufacture: 2010
Operating hours: 65,850 h
Machine Number: 61013689
Processed materials: PE and PP thermoplastics
Extras:
- 2x core pulls (movable core, fixed core)
- Pneumatic valve 1 on FWAP
- Pressure accumulator for increased injection performance
- Fast SK shut-down CX Midrange
- Ejection of cooled nozzle plug
- Start handling during mold movement
- Start-up mode
- Cycle time analysis
- External USB keyboard
- Graphic analysis with maintenance notes
- Electronic coding injection unit
- Pneumatic valve on BWAP for blow-out
- 12 temperature control zones
- Volt-free BDE contact
- Process monitoring
- Cycle memory
- Trend graphics – target/actual comparison
- PV control
- Active back pressure control
- Single owner – German origin
- Regular maintenance by manufacturer and previous owner
Clamping Unit
Clamping force: 2,500 kN / 250 t
Tie bar distance: 630 x 630 mm
Platen size: 995 x 1050 mm
Opening stroke: 820 mm
Mold height: min. 330 mm
Max. daylight: 1,150 mm
Ejector stroke: 200 mm
Ejector force: max. 57 kN / return 26.3 kN
Injection Unit
Screw diameter: 50 mm
Injection volume: 432 cm³
Shot weight: 393 g/PS
Injection pressure: 2,304 bar
Electrical Equipment
Pump: 45 kW
Heaters: 5 zones, 18.7 kW
Weight: 13,900 kg
Dimensions: 5.7 x 2.3 x 2.3 m
Complete documentation, manual, and software included
Available immediately from our warehouse in Hannover, Germany, ex works or delivered free to your site (shipping costs apply).
The machine is offered function-tested and is in our sole ownership.
The requested machine is immediately available in our Hanover warehouse, is offered function-tested, and may be inspected under power.
For additional information about our machines and company:
- We sell only machines purchased from active production that are in our own stock in Hannover.
- All offered machines are tested and inspected before dismantling.
- We DO NOT sell insolvency assets and we are NOT brokers handling third-party equipment.
- All machines offered come from successful companies where maintenance and care are self-evident.
- All machines offered are available for inspection at our warehouse.
Mali oglas
Egenhofen
373 km
Ventilator
Krämer250
Pokliči
Stanje: rabljeno, Premer sesanja: 250 mm
Premer izpusta: 250 mm
Volumski pretok: 5000 m³/h
Bedeyvz Rvopfx Agtslg
Moč motorja: 5,5 kW
Teža: 100 kg
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Denzlingen
580 km
CNC stružnica
MAZAKQuick Turn Nexus 250-II MY
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, MAZAK QUICK TURN NEXUS 250-II MY
Maks. premer obdelave: 380 mm
Maks. dolžina obdelave: 504 mm
Bsdpfx Ageyy Ad Eotslg
Maks. hitrost rezkanja: 4.500 vrt/min
Maks. hitrost vretena: 4.000 vrt/min
Maks. premer droga: 74 mm
Stroj je opremljen z:
- CNC krmilnik Mazatrol Matrix Nexus 2
- KITAGAWA trikovčeljustno vpenjalno glavo B-210, premer 254 mm
- Tool Eye
- C-os
- Y-os
- avtomatski lovilec delov
- NC konjiček
- ojačano črpalko za hladilno tekočino
- transporter za odrezke MAYFRAN
- 8 kosov fiksnih nosilcev orodja
- 2 kosa pogonskih nosilcev orodja
Mali oglas
Скопје
690 km
Stroj za tiskanje etiket
EDALEALPHA 250
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, največja širina izdelka: 250 mm, delovna širina: 247 mm, število predalov: 4, širina valja: 250 mm, premer valja: 600 mm, notranji premer: 76 mm, EDALE ALPHA 250
leto: 2007
širina traku: 250 mm
4-barvni tisk
4 IR sušilci
2 izsekovalni postaji
4 anilox valji
4 rakel rezila
kamera za nadzor traku
rezanje traku
vodenje traku
2 kompleta tiskarskih valjev (8 kosov)
Bedsyrzy Ujpfx Agtolg
2 magnetna valja
zelo dobro stanje
V produkciji
Ogled možen kadarkoli
Mali oglas
Vilnius
1.195 km
Stroj za upogibanje pločevine
SCHECHTLMAX 250
Pokliči
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, delovna širina: 2.500 mm, Na prodaj upogibni stroj SCHECHTL MAX 250 (2020).
Stanje: zelo dobro, minimalno rabljeno. Naprava je popolnoma funkcionalna, primerna za profesionalno obdelavo pločevine.
Proizvajalec: SCHECHTL Maschinenbau GmbH (Nemčija)
Model: MAX 250
Trdna, natančna in zanesljiva motorizirana upogibna stiskalnica, namenjena natančnemu upogibanju različnih vrst kovinskih pločevin.
Tehnične specifikacije:
Blodpfx Agjxmfbwstog
Delovna dolžina: 2500 mm
Debelina upogibanja (maks.): 2,0 mm
Hod zadnjega prislona: 750 mm (motoriziran)
Krmilni sistem: da (CNC/elektronsko upravljanje)
Orodja za upogibno gred: 10 mm in 25 mm
Leto izdelave: 2020
Za dodatna vprašanja nas lahko kontaktirate.
Mali oglas
Avižieniai
1.199 km
Stroji za utrjevanje pločevine
SchechtlSZP 250
Pokliči
Stanje: rabljeno, Leto izdelave: 2004,
Olajšamo vam iskanje: "rivelica newform 250"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec



































































































































































































