Plansel/Nordautomation Linija Za Pakiranje Plošč nakup rabljenega (88.309)

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: FA55, Machine overview The ATLANTA COMBIGIOTTO 90-M is a fully automatic inline packaging machine that collates containers into bundles and then packs them on a corrugated tray with film overwrap. The machine is configured for wrap + film on tray applications and operates with straight-line (inline) product infeed. It is suitable for a wide range of container formats from 0.5 L to 10 L, typically handling PET, glass, or HDPE bottles, cans, and similar rigid containers. The unit was built in 2008 and underwent a complete refurbishment in 2022. It is classified as operational. Operating mode: Automatic Infeed layout: Straight infeed (inline) Packaging: Tray pack with neutral film overwrap Kedexdnbzopfx Aqqslt Format range: 0.5 L – 10 L Machine configuration: Delivered without container feeding system (to be provided by the line integrator) Year of manufacture: 2008; Refurbished: 2022 Typical process sequence: Product collation in-line; picking and forming of tray blanks around the collated bundle; application and sealing of neutral film; discharge for downstream handling. This configuration ensures robust tray stabilization with protective film overwrap, suitable for distribution and palletizing. Technical data Model: COMBIGIOTTO 90-M Brand: ATLANTA Operational status: Ready for operation Packaging configuration: Wrap + film on tray Film type: Neutral Tray: Available (tray packaging configuration) Machine infeed type: Straight (inline) Format capability: 0.5 L to 10 L containers Year: 2008 (refurbished 2022) Automation & Control Industrial PLC-based control system with HMI for recipe management and setpoint control (format parameters stored for repeatability). Speed control via frequency inverter/servo drives for synchronization of infeed, collation, tray wrapping, and film application. Integrated diagnostics, alarm history, and counters (shift/lot totals). Typical sensors: product presence, jam detection, film roll end, tray blank level, safety interlock status. Electrical protection class: IP54 for the electrical system and motors. Line Integration Container infeed: Not supplied with the machine. The packaging machine requires a stable, synchronized infeed from the line (accumulation/gap/divider to be supplied by the line integrator). Inline design simplifies integration with fillers, labelers, and downstream conveyor equipment. Standard interface signals (typically): machine ready, run enable, emergency stop loop, fault, upstream/downstream handshake. A detailed I/O list can be coordinated during integration. Discharge prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be specified as part of the project layout). Condition & Maintenance Overall status: Ready for operation. General overhaul completed in 2022 to restore full functionality. Recommended preventive maintenance: periodic inspection of film path and sealing units, collation guides, tray magazine mechanisms...

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: FA56, Machine Overview Automatic tray and film packer ATLANTA COMBIGIOTTO 90-M, designed for secondary packaging of bottles with 90° side infeed. The machine forms a corrugated tray and wraps the product in neutral shrink film, afterwards passing the bundle through a shrink tunnel to produce stable, retail-ready packs. Ideal for beverage lines processing PET, glass or HDPE bottles. Reference No. FA56. Year of manufacture 2008, overhauled in 2022. Condition: Ready for operation. Expected output up to 25 bundles/min, depending on product and format. Operating Principle: Automatic grouping of bottles, tray forming/loading, film wrapping and consolidation in the shrink tunnel. Ksdpfx Aox H Thzjqqslt Packaging Configuration: Tray + neutral film (shrink). 90° infeed enables compact layouts and easy integration with existing conveyor systems. Key Technical Data Brand / Model: ATLANTA COMBIGIOTTO 90-M Operating Mode: Automatic Infeed/Outfeed Alignment: 90° side infeed Packaging: Tray + film (neutral) Tray magazine/formation: Available Nominal Capacity: up to 25 bundles/min (depending on format/product) Year: 2008 (overhauled 2022) Condition: Ready for operation PLC: SIEMENS S7 E 300 Automation & Control Industrial PLC-controlled system with operator HMI for recipe selection, speed setpoints, and diagnostics. Inverter-driven drives for smooth acceleration and product handling. Optoelectronic sensors for product presence, faults, and film detection. Shrink tunnel with temperature control for consistent film application. Locked access doors with safety monitoring for protected zones. Line Integration Infeed: Accepts bottles from conveyor with 90° transfer into the feeding area; integrated selection/divider functions to create pack patterns prior to tray loading. Outfeed: Discharge conveyor after shrink tunnel for connection to inspection, carton handling, or palletizing. Signals and handshakes typically include start/stop, faults, emergency stop, and speed reference. Mechanical interface and layout diagrams available on request for line engineering. Condition & Maintenance General overhaul performed in 2022. Machine delivered ready for operation. Preventive maintenance recommended: regular checks of film path, cutting/sealing components, tray forming kits/generators, lubrication, and wear parts of conveying systems. Performance & Versatility Suitable for a wide range of cylindrical or square bottles common in beverage production. Typical bottle pack patterns (e.g. 2×2, 3×2, 4×3, etc.), depending on container size and tray dimensions. Neutral shrink film for clear presentation; tray adds strength and stacking stability. Consistent bundle quality through controlled film wrapping and thermo-shrinking process. Site Requirements Power supply: 400 V ±5%, 50 Hz ±1%, 3P + N + PE (separate neutral and protective ground). Auxiliary systems: 24 V DC. Instrumentation voltages: 24 V AC – 230 V AC.

Stanje: dober (rabljeno), Leto izdelave: 2007, 1. BARGSTEDT Loader O TSH200/D/30/12 2. First machine HOMAG OPTIMAT KFL 525/M1/C 3. HOMAG OPTIMAT TDL 510/C Turning Station 4. Second machine HOMAG OPTIMAT KFL 526/M2/C Klsdpsik H Egofx Aqqet 5. HOMAG OPTIMAT TDL 510/C Turning Station 6. WANDRES Brush 7. BARGSTEDT Unloader O TSH200/D/30/12 The machine is in continuous operation The machine is available immediately

Stanje: rabljeno, številka stroja/vozila: 008505, Pozicija 1: Krožna žaga za plošče – Podajanje od spredaj HOLZMA-HPP 350/43/43 - HEE 38/22 Pozicija 2: Dvižna miza HOLZMA-HPP 350/43/43 - HEE 38/22 Kedsy Hcd Sepfx Aqqslt

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: PST31, Gebrauchte FISCHER Komplett-Skid-Pasteurisierungs- & Kühlanlage Technische Spezifikationen & Leistungsdaten Diese skidmontierte Plattenwärmetauscher-Pasteurisieranlage ist für die Hochdurchsatz-Thermoverarbeitung konzipiert und verfügt über integrierte Kühl- sowie CIP-Funktionalität. Hergestellt von FISCHER engineering und aufgebaut auf einem Edelstahl-Skid, ermöglicht sie eine schnelle Inbetriebnahme und zuverlässige Performance in der Getränkeproduktion sowie bei industriellen Verpackungsanwendungen. Typ: Plattenwärmetauscher-Pasteur (EUROCAL Serie) Modell: EUROCAL 18CFG Durchsatz: 6.000 l/h Sektionen: 4-teiliger Plattenblock für Heizung, Regeneration und Kühlung Betriebsdruck (PS): 6 bar Baujahr: 2004 Ausführung: Skid und produktberührte Teile aus Edelstahl Kühlmodul: Luftgekühlte Wärmepumpe (Kälteleistung 30,0 kW; Heizleistung 32,0 kW; Kältemittel R407C) Ksdpsy Ai Hlefx Aqqjlt Modernste Automatisierungs- & Steuerungssysteme Der Pasteur ist mit einer zentralisierten Automatisierung zur präzisen Steuerung des Wärmeprofils und für reproduzierbare Produktqualität über alle Schichten hinweg ausgestattet. Schaltschrank: Zentraler Edelstahlschrank mit SPS-Steuerung und Touchscreen HMI Sensorik: Druckmanometer, Durchflussregelung und Temperatursensorik für geschlossene Regelkreise Prozessanalytik: Inline-Qualitätsüberwachung zur Echtzeitkontrolle relevanter Produktparameter CIP-Automatisierung: Pneumatische Ventilinseln und Steuerköpfe für automatisierte Reinigungsvorgänge Integrationsmöglichkeiten in die Produktionslinie Diese gebrauchte thermische Verarbeitungseinheit ist zur nahtlosen Anbindung vor einer Abfülllinie ausgelegt. Sie lässt sich einfach an vorhandene Versorgungsleitungen anbinden und kann sowohl mit bestehenden als auch mit neuen Abfüllanlagen kombiniert werden. Inline/Standalone: Als eigenständiges Pasteurisierungs- und Kühlsystem oder inline als Teil einer kompletten Verpackungslinie betreibbar Formatflexibilität: Für verschiedene flüssige Produkte geeignet, vor der Abfüllung in PET, Glas oder andere Gebinde Schnellanschluss: Rohrleitungen und Medienanschlüsse am Skid ermöglichen schnelle Inbetriebnahme und Produktwechsel Maschinenzustand & Wartungshistorie Die Anlage ist professionell gewartet und befindet sich in sofort betriebsbereitem Zustand. Sie eignet sich für einen schnellen Standortwechsel und zügige Inbetriebnahme in Getränke- oder Lebensmittelbetrieben. Status: Sofort einsatzbereit Pflege: Laufend gewartete, industriegeeignete Komponenten für den Dauerbetrieb Leistung & Vielseitigkeit Ideal für hochwertige thermische Behandlung mit effizienter Energierückgewinnung – gewährleistet konstante Pasteurisierung unter Erhalt sensorischer Eigenschaften. Anwendungen: Milchpasteurisierung, Fruchtsaftverarbeitung, Siruphandling, Würzekühlung in Brauereien Energieeffizienz: Die Regenerationssektion steigert den Wärmerückgewinnungsgrad und reduziert den Medienverbrauch Qualitätssicherung: I...

Stanje: rabljeno, številka stroja/vozila: LC618, Gebrauchte automatische 18,9L Abfüllanlage 500 F/h Technische Spezifikationen & Leistungsdaten Diese automatische Abfüllanlage ist speziell für große 18,9L-Flaschen konzipiert und gewährleistet zuverlässige Abläufe beim Waschen, Desinfizieren, Befüllen und Verschließen. Das Komplettsystem arbeitet synchronisiert, sodass ein gleichmäßiger Durchsatz sowie präzise Prozesse in allen Arbeitsstufen erzielt werden. Leistung: 500 Flaschen pro Stunde Gesamtleistung: 9.450 Liter pro Stunde Flaschenformat: 18,9L Arbeitsstationen: Waschen, Desinfizieren, Befüllen, Verschließen Füllköpfe: 6 Betrieb: Vollautomatische Linie Einsatzgebiet: Optimal für die Hochleistungsabfüllung und -handhabung von Großgebinden Moderne Automatisierungs- & Steuerungssysteme Die Linie arbeitet mit automatischer Taktsteuerung an allen Stationen, um einen stabilen Betrieb bei reduziertem Bedienaufwand zu gewährleisten. Die Bedienelemente bieten einfache Start/Stopp- sowie Formatwechsel-Funktionen, was Rüstzeiten minimiert und die Verfügbarkeit maximiert. Automatischer Zyklus mit synchronisiertem Waschen, Desinfizieren, Befüllen und Verschließen Zentrale Bedienoberfläche zur Statusüberwachung und Anpassung Sensorik und Verriegelungen sorgen für einen sicheren Flaschendurchlauf und fehlerfreie Zyklusabschlüsse Schneller Formatwechsel für 18,9L-Flaschen mit reproduzierbaren Einstellungen Integration in Produktionslinien Die Anlage ist als Komplettlinie für 18,9L-Flaschen ausgelegt und kann in vorgelagerte wie nachgelagerte Förder- und Verpackungstechnik integriert werden. Das Layout erlaubt einen einfachen Anschluss an Förderbänder, Puffer- und Verpackungseinheiten. Inline-Betrieb als vollwertige Abfüllstation für Großgebinde Kompatibel mit Standardförderern für Ein- und Auslauf Optimiertes Handling für 18,9L-Flaschen, gleichmäßige Übergabe zwischen den Stationen Ideal für Getränkeproduktion mit Bedarf an Großflaschen Maschinenzustand & Wartungshistorie Die Linie wurde kaum genutzt und nur für Testläufe betrieben. Sie ist voll funktionsfähig, kurzfristig testbereit und sofort produktionsfähig. Aufgrund des minimalen Einsatzes eignet sich dieses Angebot ideal für Interessenten, die eine gebrauchte Abfüllanlage mit nahezu neuwertigem Zustand suchen. Zustand: Kaum gebraucht (nur Probeläufe) Status: Voll funktionsfähig und testbereit Betriebsbereitschaft: Produktionsfähig konfiguriert Klodey Ai Hfopfx Aqqjt Leistungsfähigkeit & Vielseitigkeit Spezifisch für 18,9L-Gebinde entwickelt, garantiert die Anlage einen stabilen Prozessablauf und gleichmäßigen Output. Die 6-fach-Füllstation balanciert Durchsatz und präzise Abfüllung für große Volumina. Die vorgeschalteten Wasch- und Desinfektionsstationen unterstützen die Produktqualität in Getränkeproduktion und industrieller Verpackung. Konstante Leistung bei Großgebinde-Abfüllung Integrierte Vorbehandlung (Waschen & Desinfizieren) vor der Füllung Automatisiertes Verschließen abgestimmt auf das 18,9L-Handling Geeignet für Getränkeproduktion mit Großflaschenbedarf

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The GWDress-250 smartline is the intelligent solution for precise dressing of grinding wheels up to a diameter of 250 mm. Thanks to selectable manual or automatic control, dressing processes can be flexibly and highly efficiently configured. Performance Data: - Rotary and feed axes, CNC-controlled - Diamond grinding spindle: HSK-50 or per customer request (e.g., SK-40, Perfect Arbor, etc.) - Max. dresser wheel diameter: ø300 mm - Max. dresser wheel width: 20 mm - Max. grinding wheel diameter: up to ø250 mm - Grinding wheel speed: 0–1500 rpm (infinitely variable) - Range of motion, left/right: 135 mm - Range of motion, forward/backward: 135 mm - Dresser wheel dimensions (silicon carbide): ø180x10xΨ32 mm - Approx. 98 degrees traversable on both sides - Dresser wheel speed: 0–2800 rpm (infinitely variable) - Dresser wheel oscillation frequency: 0–50 cycles/min (infinitely variable) Ksdpfxsw E E S As Aqqjlt - Dresser wheel oscillation length: 0–50 mm (adjustable) - X, Y axis optical scale system: 0.001 mm - Capabilities: Profile dressing, disc pack dressing - Connection: 380V, 50Hz, total power approx. 1.5 kW - DXF import included - Camera system with live transmission to a 23" monitor included - Latest software generation GWDress-Studio with automatic AI measurement included - Country of origin: Austria

Stanje: zelo dobro (rabljeno), HUNKELER WEITERVERARBEITUNGSSTRASSE (Abwicklung, Stanzen, Wenden, Aufwicklung) Die Linie besteht aus: Position 1: ABROLLER HUNKELER UW4 G 7119 (M.Nr.: 659595 // Bj.: 2001) Position 2: QUER & LÄNGST SCHNEIDER HUNKELER AM 520-W 7150 (M.Nr.: 1509697 // Bj.: 2004) Position 3: ÜBERGABESTATION HUNKELER PU 520-W 7150 (M.Nr.: 2010062 // Bj.: 2008) Position 4: STANZ & PERFORIEREINHEIT HUNKELER DM 520-W 7152 (M.Nr.: 1509697 // Bj.: 2004) Position 5: WENDER HUNKELER WM 520-W (M.Nr.: 1509697 // Bj.: 2004) Position 6: CUTTER (QUER & LÄNGS) HUNKELER CU 520-W 7154 (M.Nr.: 1509697 // Bj.: 2004) Position 7: SCHUPPENAUSLAGE ERTEC STSC-2 (S.Nr.: 34 // Bj.: 2008) Position 7.1: GANZ NEUER (NIE BENUTZER) FALZAPARAT FS4 7127 (M.Nr.: 1509697 // Bj.: 2004) KANN ANSTELLE DE AUSLAGE GENUTZT WERDEN Ksdpfx Aqoxphnleqslt Position 8: KRAN

Leto izdelave: 1996, stanje: zelo dobro (rabljeno), številka stroja/vozila: 121, more MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Kljdpfx Aoh Eib Eoqqjt

Stanje: skoraj kot novo (rabljeno), TETRA PAK KARTONSKI PAKIRNIK CBP 32 VERZIJA 400 Klodpfx Aeya I Sgeqqst LETNIK 2010 LE 2177 OBRATOVALNIH UR! VEČNAMENSKI PAKIRNIK ZA 200/250/1000 ml KOT NOV LOKACIJA – POLJSKA PRIPRAVLJEN ZA POŠILJANJE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, GEA MultiFormer 400 | Plate Former Manufacturer: GEA Food Solutions Bakel B.V. Model: MultiFormer 400 Machine No.: E022110205415 Year of Manufacture: 01/2021 Machine Weight: 1,200 kg Power Supply: 380–415 V, 3-phase, 50 Hz Power: 8 kW Current Consumption: 15.4 A Conveyor Belt: Stainless steel mesh, width 400 mm Machine Dimensions: 3100 × 1000 × 2700 mm Included Additional Equipment: Forming Plates: 2 pallets with sets of plates for various product shapes. Service Rack: Made of stainless steel, equipped with 2 additional discharge belts (width 400 mm). Dimensions: 1350 × 600 × 2100 mm. Ksdpfey Sbzmsx Aqqjlt Tool Trolley: Original GEA cart for convenient storage and exchange of forming parts. Dimensions: 1200 × 700 × 950 mm. The GEA MultiFormer 400 is a professional food forming machine utilizing proven plate technology. Manufactured in 2021, the device features a modern “Made in the Netherlands” design, ensuring top-level hygiene and production precision. The system enables fast product changeover—from classic burgers and nuggets to custom 2D or 3D shapes. Thanks to the stainless steel mesh belt and the included discharge conveyor system, the machine is ready for direct integration with coating, frying, or freezing tunnel lines. The supplied tool trolley and complete set of forming plates make this package an exceptionally flexible solution for meat, poultry, and plant-based food processors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, 683 USED Industrial line for rolls, hamburger buns, hot dog buns. NOTE: The line can be inspected while in operation in Poland. EQUIPMENT: - Bowl hoist, - KOENIG six-row divider-rounder, - Intermediate proofer, - Bun stamping station, - Final proofer, - Tunnel oven, - Feeding conveyors, - Bun counter. 1. Koenig Bun Line TECHNICAL DATA: - Output: 3,000–12,000 pcs/h - Dough weight: 50–130 g - Stamping: 3 stamp patterns (Kaiser, Portuguese, and others) - Line dimensions: length 900 cm, height 376 cm, width 180 cm 2. Final Proofer TECHNICAL DATA: - Final proofer equipped with temperature and humidity control - Dimensions: length 460 cm, width 340 cm, height 380 cm Kledpfx Aqsy Skr Ioqet 3. Ciberpan Tunnel Oven TECHNICAL DATA: - Dimensions: width 386 cm, length 29 m, height 290 cm - Baking belt working width: 245 cm, belt length: 28.8 m - Baking surface: 70 m² - Weishaupt gas burner: power 500–550 kW - Equipped with burner and steam generation system 4. Affeld Bun Counter TECHNICAL DATA: - Year of production: 2012 - Dimensions: width 200 cm, length 227 cm, height 240 cm Price given is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Stanje: rabljeno, Leto izdelave: 2011, Overview This bottling line for non-carbonated beverages in PET bottles was manufactured in 2011 and includes a filtration unit, filling and capping machine, labelling machine, and a pallet wrapper. It is designed for bottle sizes ranging from 1.5L to 5L. The equipment is being sold due to factory closure. All machines have been stored professionally and can be inspected on site. Technical details Filtration Unit | GYM Internacional | 8000 | 2011 Manufacturer: GYM Internacional Model: 8000 Ksdpfxjv E Hais Aqqelt Year of manufacture: 2011 Capacity: 8,000 L/h Power consumption: 4 kW Dimensions: 2,500 x 1,500 x 100 mm Weight: 1,110 kg Bacteriological filtration by housing system Automatic Filling Monoblock | GYM Internacional | Grupo 9-1.PK | 2011 Bottle formats: 1.5L & 5L PET Output: 1,600 bottles/hour (1.5L) 700 bottles/hour (5L) Filling heads: 9 Capping heads: 1 (screw cap) Bottle diameter: Min. 120 mm, Max. 300 mm Bottle height: 250–400 mm Rotation direction: clockwise Power consumption: 3.5 kW Dimensions: 4,000 x 3,000 x 3,500 mm Weight: 2,500 kg Rotary Labelling Machine | NEWTEC | LEOPARD HM 720 F6 S1E1 | 2011 Output: 3,000 bottles/hour Dimensions: 2,750 x 1,700 x 1,780 mm Weight: 3,500 kg Pallet Wrapper (semi-automatic) | ECOPLAT | ECOPLAT BASE | 2011 Output: 35 pallets/hour Type: turntable Control: PLC Max. pallet weight: 2,000 kg Semi-automatic Dimensions: 2,439 x 1,500 x 2,580 mm

Stanje: rabljeno, Leto izdelave: 2000, Overview This complete PET filling line was manufactured between 2000 and 2012 by a group of renowned European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow molder, filler, labeller, packaging machine, as well as various conveying and inspection systems. The plant achieves an output of up to 36,000 bottles/h for 1.5 L and is immediately available. All machines are well maintained and come with original components and corresponding peripheral equipment. Technical Data Kjdpewh U Avofx Aqqslt - Capacity: 36,000 bottles/h at 1.5L water; 35,000 bottles/h at 1.5L soft drinks (sweetened); 32,000 bottles/h at 1.5L light soft drinks - Formats: 0.5L and 1.5L bottles - Closure: PCO 28-1881 - Filling products: water and carbonated soft drinks (7.5g CO₂) - Closure system: Screw caps, feeding via chute and tipper (Zalkin + NSM) - Packaging: Shrink film, 3x2 bottles (dual lane) - Pallet types: Euro (1,200 x 800 mm), Düsseldorf (600 x 800 mm) - Electrical data: 400 V / 50 Hz - Controls: ABB, Siemens - Operating direction: standard Scope of Supply - Stretch blow molder: SIG Corpoplast Blomax 24, year 2008; 24 stations; heater with 20 boxes, ABB control incl. preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000, pneumatically adjustable rails, basket cable duct - Filler: KHS Innofill EV-VF, year 2000; 176 electronic filling valves, valve cluster (APV), air conveyor, infeed screw, starwheel holder, screw capper (Zalkin, 22 heads), cap feed system (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer/deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000; 65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012; 26 plates, hotmelt, wrap-around, roll feed, parallel feed, safety lift version - Inspection & coding: Fill level and closure inspection: KHS Innocheck CUB Vision Circle, year 2013; bottle laser coding: Videojet with enclosure; pack inspection: KHS Innocheck CUB, year 2015 - Packaging machine: Kisters SP060V, year 2000; shrink wrapper 3x2 (dual lane), 60 cycles/min, manual lane width adjustment, film only - Conveyors & pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication; pack conveyor: Paxona + Schaefer, year 2009; pack labeller: Contact 100, self-adhesive label from roll

Stanje: rabljeno, Leto izdelave: 2001, Overview This glass bottle filling line for still and carbonated water was built on average in 2001 by several European manufacturers such as TMG, Zecchetti, Bardi, Muvitec, Procomac, P.E. Labellers, and others. It is a complete and fully integrated line encompassing all key production steps including depalletizing, washing, filling, capping, labeling, packing, palletizing, and wrapping. The line has been regularly maintained, includes newer components, and will be available from July 2025, as it is currently operational. Technical Data - Capacity: up to 12,000 bottles/hour - Formats: 250 ml, 330 ml, 500 ml, 750 ml, 1000 ml - Product: Still and sparkling natural mineral water - Neck finish: S294 MCA - 1 - Bottle diameters: 170 mm, 205 mm, 218 mm, 259–271 mm, 295 mm - Packaging formats: - 250 ml: 24-bottle carton - 300 ml: 24-bottle carton - 500 ml: 12-bottle carton / 20-bottle plastic pack Kodpfx Ajwhvc Rjqqslt - 750 ml: 12-bottle carton - 1000 ml: 12-bottle carton / 12-bottle plastic pack - Years of manufacture: various (1991–2016) Scope of Supply - Depalletizer (TMG VEGA 50, 2001) - Depalletizer (Zecchetti DE Z 2T, 1993) - Bottle washer (Bardi NILO 1 16R, 2001) - Filler (Muvitec ECOFILL M24 6 12, 2001; Procomac PR 300232.01, 2001) - Carbonator (Muvitec, 2001) - Cap remover (Grassle REM 20, 1991) - Dry air conveyor (Europool TF 03, 2013) - Labelling machine (P.E. Labellers MASTER M/S 770/161/8S-SE, 2011) - Carton erector (Siat HM 145, 2001) - Combined packer (Zacchetti IN Z 2T, 1993) - Carton sealer (Siat AVV SIAT HM 11-T-Muvitec, 2001) - Hot glue system (Preo EC5TRA2, 2001) - Palletizer robot (ACMI ZX165U, 2002) - Stretch wrapper (Robopac TECHNOPLANT 3000PVS, 2016) - Closure silos (3x Master ALN600LT, 2001)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna višina: 1.700 mm, skupna širina: 3.400 mm, skupna dolžina: 2.300 mm, skupna masa: 2.400 kg, priključek za stisnjen zrak: 8 letvica, trajanje garancije: 60 meseci, delovna širina: 2.400 mm, višina dovoda: 1.000 mm, Oprema: dokumentacija / priročnik, Specifikacija: VLEČNA HITROST: 2 m/s Kljdjfbl Haepfx Aqqst DIMENZIJE STROJA: 3400 mm x 2300 mm x 1700 mm TIP KARTONA: enojni, dvojni in trojni val do 10 mm in 1000 GSM MAKSIMALNA VELIKOST PLOŠČE: 2400 mm x 7000 mm MINIMALNA VELIKOST PLOŠČE: 200 x 630 mm REZALNI NOŽI: 2x 500 mm (segmentirani) ŠIRINA REZA: 8 mm NEOBVEZNE DODATNE ENOTE: Enobarvni Flexo tiskarski modul, lepilni modul (Nordson sistem za hladno lepilo), vakuumska avtomatska podajalna miza, dodatna orodja. Glavna prednost je avtomatizacija. Samodejna nastavitev rezalnih nožev, vodil in bigalnih koles z integriranimi skalpeli omogoča temu modelu, da skrajša čas menjave med modeli škatel na zgolj trideset sekund. Stroj je opremljen z izsekovalnim modulom za izdelavo lukenj za ročaje. BM Varenne ima 4 postaje s 6 orodji: 2 krožna noža in 2 bigalni kolesi z integriranimi skalpeli za rezanje zavihkov za lepljenje. Možen je individualni nadzor vseh 4 postaj. Kolesa in nože je možno hitro zamenjati brez orodja - različni premeri in formati. Kombinacija rezanja, biganja in perforiranja omogoča doslej neprimerljivo prilagodljivost za stroje te vrste. Dodatna hitromenjalna orodja, kot so perforacijski noži, dvojna bigalna kolesa in drugo, nudijo takojšnjo prilagodljivost in večjo izhodno zmogljivost. S strojem prejmete 5-letno garancijo, kar je vodilna doba na trgu in dokaz kakovosti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Kompletna linija za proizvodnjo masivnega parketa, proizvajalec MICHAEL WEINIG AG / GMC SERVICE, leto izdelave: 2015/2007. Kapaciteta: 800 m2/izmeno. Maksimalna širina parketa: 200 mm, maksimalna dolžina: 2.400 mm. Na tej liniji je možno hkrati proizvajati različne dimenzije! Vrste parketa: Riba kost 90°, Chevron 45°/60°. Stanje: odlično. Kledpfoyzfr Ujx Aqqjt

Stanje: rabljeno, Leto izdelave: 2000, Spindle diameter: 140 mm X-travel: 6000 mm Y-travel: 2500 mm Z-travel: 800 mm W-travel: 700 mm Rapid traverse: 10 m/min Spindle taper: ISO 50 Control: Heidenhain ITNC 430 Table field: 3500x2500 mm Borings mill rotary table: Rottler Model: DVT200/2500 30NC 2000 Table dimensions: 2500x2000 mm Table load capacity: 30 t Table travel: 700 mm Rotary table: 360° T-slot width: 28/50 mm T-slot spacing: 170 mm Number of T-slots: 11 Facing slide: 680 mm Facing slide travel: 170 mm Spindle speed: 1600 rpm CNC boring mill WOTAN (ROTTLER) Rapid 2 K Manufacturer: WOTAN (ROTTLER), Model: Rapid 2 K, Year of manufacture: 1987, Read-off operating hours: 52,253 Machine no.: KM 1214/M 876 01.00 Overhauled and retrofitted in 2000 by ROTTLER Control: HEIDENHAIN TNC 430 Equipped with clamping tables Rottler CNC rotary and shifting table DVT 2000/2500 30 NC Band filter DGS, Industrial cooling FRISKO, Hydraulic unit The technical data is based on information provided by the manufacturer and/or operator and is therefore non-binding for us. Prior sale is reserved; exclusively our general terms and conditions of sale apply. About us - More than 400 owned machines in stock - Over 15,000 m² storage space, crane capacity 70 t - More than 10,000 accessory items for your workshop If you want to sell machines, production lines or your company, please contact us. Klodpfxoy Sui Rs Aqqet Further offers can be found on our website. Inspections are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Dražba varilne in čistilne linije, sestavljene iz URBAN AKS 1610 + URBAN SV 530! Stroj je bil obnovljen leta 2024! TEHNIČNE PODROBNOSTI Kotna varilna naprava URBAN AKS 1610 Varilni kot: 30° - 180° Varilni šiv: visokokakovosten, natančen in enakomeren Upravljanje: PLC-krmiljenje Značilnosti: pnevmatsko vpenjanje, robustna konstrukcija Avtomatska naprava za čiščenje vogalov URBAN SV 530 Funkcija: avtomatska naprava za čiščenje vogalov Čistilna orodja: rezkalna in rezilna orodja Značilnosti: nastavljivi parametri čiščenja Obratovalna napetost: 230/400 V L1, L2, L3, N, PE Moč: 3,5 kW Tok: 6 A Klodpfx Aqey Szbtoqet Zaščita: 3 x 10 A Krmilna napetost: 24 V DC

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 System Features 1. Modern design with robotic arm 2. Active servo-driven 90⁰ box folding 3. Single magazine carton feed 4. Bottom sealing with adhesive tape 5. Five servo-drive units 6. Steel frame construction 7. HMI control panel 8. Standard running direction left to right; available in both directions 9. Documentation in national language Technical Specifications 1. Product length: L145–400 mm (up to 650 mm on request) 2. Product width: B80–350 mm (up to 500 mm on request) 3. Product height: H150–350 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max. 48 mm (modification on request) 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on operating speed Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 System Features 1. Modern design with robotic arm 2. Active servo-driven 90⁰ box folding 3. Single magazine carton feed 4. Bottom sealing with adhesive tape 5. Five servo-drive units 6. Steel frame construction 7. HMI control panel 8. Standard running direction left to right; available in both directions 9. Documentation in national language Technical Specifications 1. Product length: L275–500 mm (up to 650 mm on request) 2. Product width: B140–400 mm (up to 500 mm on request) 3. Product height: H140–400 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max. 58 mm (modification on request) 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on operating speed Kodpfeya Dh Djx Aqqslt Carton Erector Advanced 650 Fully Automatic Net Price: €29,900 System Features 1. Modern design with robotic arm 2. Active servo-driven 90⁰ box folding 3. Single magazine carton feed 4. Bottom sealing with adhesive tape 5. Five servo-drive units 6. Steel frame construction 7. HMI control panel 8. Standard running direction left to right; available in both directions 9. Documentation in national language Technical Specifications 1. Product length: L285–650 mm 2. Product width: B280–500 mm 3. Product height: H150–500 mm 4. Packing speed: 5–25 cartons/min 5. Maximum tape width: max. 75 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on operating speed

Stanje: rabljeno, Leto izdelave: 2018, Overview This can filling line consists of machines from Krones, KHS, Ferrum, Kisters, Hein, Strema and additional system components. The line is designed for beverage canning with a nominal output of approximately 60,000 cans per hour. The main filling and seaming area includes a KHS Innofill EMD 108S filler and a Ferrum F812 can seamer. The line also incorporates modern inspection and handling equipment, including a Krones Checkmat from 2023, several Krones machines from 2018, and a Strema A5000BII from 2021. The system covers the core process from can handling and filling through seaming, inspection, pasteurization, to packaging and transport. Several machines have been modernised or upgraded over time, making the line a combination of proven core filling technology and newer inspection, packaging, and auxiliary equipment. Technical Data Output: approx. 60,000 cans per hour Kedpfx Aey Rxtqsqqolt Container type: Standard cans 500ml & 330ml Condition: Used equipment, very good condition, well maintained Application: Beer, carbonated soft drinks Scope of Supply Can depalletizer | Krones | Pressant | Automatic can depalletizing system | 2018 Empty can inspector | Krones | Cantronic 709 | 2018 Can rinser | Hein | Can rinsing system | 1978 Can filler | KHS | Innofill EMD 108S | Filler for beer and carbonated soft drinks | 1997 Can seamer | Ferrum | F812 | Can seaming machine | 1997 Lid feeding system | CSW | Lid feeding system for can seamer | Year to be confirmed Fill level inspection | Krones | Checkmat 731 | 2023 Tunnel pasteurizer | KHS | Innopas | Tunnel pasteurization system | 2001 Can dryer | Gesete | BasicLine | 2018 Fill level inspection | Krones | Checkmat 707 | Fill level control system | 2018 Tray and shrink film packer | Kisters+ZEVA | 197/60+ST/II-600V; completely overhauled in 2015 | 1992 Grouping station | Krones | Robobox T-GS | Product grouping station before palletizing | 2018 Palletizer | Krones | Modulpal | Automatic palletizing system | 2018 Pallet stretch wrapper | Strema | A5000BII | 2021 Pallet labeler | Logopak | 850 P3 T02 P06 | 2022 Pallet conveyor | Krones | Pallet transport system | 2018 Tray conveyor | Krones | Tray conveyor belts | 2018 Can conveyor | Krones | Can conveying system | 2002 Additional Information The tray and shrink film packer was originally manufactured in 1992 and was fully overhauled in 2015. The line combines proven core filling technology with several newer Krones handling and inspection components. Offered used, in its current condition, without warranty.

Stanje: rabljeno, Leto izdelave: 2000, Overview This complete hot-fill line for still beverages/juices was custom-assembled by the previous operator and operated reliably until the end. The line is designed for the preparation, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes systems for thermal pre-treatment, filling, post-cooling, and final packaging. The line is still installed and can be inspected on site at any time. Technical Data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 l / 1.0 l / 0.5 l / 1.5 l Application: Hot filling of juice and still beverages Configuration: Heating/pasteurization system (based on a plate heat exchanger) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and closing machine Utilities: Compressed air, power supply Scope of Delivery Depalletizing crane system | DEMAG | Manual depalletizing of layers with air-cushion gripper system Bottle rinser | FIMER | Rotary rinser with conveyor system Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot filling Cooling system | 3-zone cooling tunnel with spray system Plate heat exchanger | GEA | Integrated cooling circuit Supply tank | Speidel | Atmospheric tank Pasteurization system | API Schmidt-Bretten | Plate heat exchanger-based heating system Carton erecting unit | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton erecting unit Carton sealing machine | BORTOLIN | Hot melt carton sealing Adhesive application system | Nordson | Series 3400 | Hot melt system Conveyor systems | Various transport conveyors Kledpfxoy Rmfbs Aqqst

Stanje: rabljeno, Leto izdelave: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, manufactured in 2025, consists of an external KEG washing machine (AW 75), a KEG cleaning and filling machine (HRF 101), and a complete feed and transport system. The plant is designed to handle various KEG formats. With a throughput of approximately 30–35 KEGs per hour, the system is suitable for small to medium-sized breweries or beverage producers. The system is equipped with a Siemens S7-1500 control unit and a touchscreen HMI, allowing for fully automated operation with a guided user interface. The delivery includes a complete transport system, storage tanks with dosing and conductivity measurement, as well as all necessary piping between the machine and media tanks. The system is offered with a two-year manufacturer's warranty and is available for delivery within approximately 2–3 months. The attached project layout drawing illustrates the complete system arrangement, including KEG washing machine, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data Manufacturer: ATS Wibbing GmbH Machine type: Fully automatic KEG cleaning and filling system Main components: ATS external washing unit AW 75, ATS cleaning and filling machine HRF 101, feed and transport system Year of manufacture: 2025 Availability: approx. 2–3 months Capacity: approx. 30–35 KEGs/h Suitable KEG formats: Stainless steel KEGs, Plus KEGs, Party KEGs, containers Diameter range: 160–420 mm Height range: 280–600 mm Control: Siemens S7-1500 Kodpfx Aoy Rk Igoqqelt HMI: Touch panel with operator guidance External washing machine AW 75: Indexed continuous operation, circulating bath approx. 270 l, spray pump 2.2 kW, bag filter with pressure monitoring Cleaning and filling machine HRF 101: Stainless steel control cabinet, fully automatic cleaning and filling process Transport system: Roller and chain conveyor sections, complete electrical and sensor equipment, cable trays included Supply system: 4 stacked tanks (each 150 l, 120 l usable volume), 3 tanks with heating, stainless steel pumps, temperature control and dry-run protection, temperature and level indication, 2 conductivity measurement systems with dosing pumps, complete piping between machine and tanks, pressure and temperature monitoring for product, CO₂, sterile air and steam, separate control cabinet Expansion vessel: 150 l Pallet handling aid Required media: Sterile air: approx. 3 bar, working air: approx. 6 bar, CO2: approx. 2–3 bar, steam: max. 3 bar, water supply: min. 50°C Warranty: 2 years manufacturer's warranty

Leto izdelave: 1990, stanje: rabljeno, Ponujamo rabljeno tehnološko linijo za proizvodnjo keramičnih izdelkov (Handle/Keller), ki se odlikuje po izjemni vzdržljivosti in enostavnem vzdrževanju. Linijo sestavljajo naslednji stroji in naprave: 1. Stroji za predobdelavo surovine: - Krožni mlin (Edge Runner) Handle R469, letnik 1955 - Valjčni mlin AGW 1065/1085, letnik 1963 - Valjčni mlin WF 1080A, letnik 2005 - Transportni trakovi 4 kosi Kljdpfoy Nzprsx Aqqot - krmilna omara 2. Stroji za oblikovanje: - Mešalnik Handle MDVG 920B, letnik 1990 - Stiskalnica Handle PZG 56A/50, letnik 1990 - Rezalnik Keller tip 4155, letnik 1990 - Transportni trakovi 4 kosi - krmilna omara Linija je bila v neprekinjeni uporabi do konca leta 2025. Za vprašanja ali dodatne informacije nas prosimo kontaktirajte po telefonu.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna višina: 17.000 mm, skupna širina: 34.000 mm, skupna dolžina: 23.000 mm, skupna masa: 2.600 kg, priključek za stisnjen zrak: 8 letvica, trajanje garancije: 12 meseci, delovna širina: 2.400 mm, višina dovoda: 1.000 mm, Oprema: dokumentacija / priročnik, Visokokakovostna, najsodobnejša elektronika, vključno s servo motorji in 15'' upravljalno enoto. BOXmaker PRO 2400S – samodejna nastavitev (čas priprave do 30 sekund) KAPACITETA: do 1200 škatel na uro (FEFCO 200) DIMENZIJE STROJA: 3400 mm x 2300 mm x 1700 mm TIP KARTONA: enojen, dvojen in trojen val do 10 mm debeline in 1000 GSM MAKSIMALNA VELIKOST PLOŠČE: 2400 mm x 7000 mm MINIMALNA VELIKOST PLOŠČE: 200 mm širina x 800 mm dolžina Servo podajalnik: 2 m/s Rezila za utore x2 Servo pogon enote za utore (30% hitrejši cikel) Klsdpfx Aod Sap Tjqqjt Kolesa za biganje z integriranimi skalpeli (vzdolžno biganje in odrez lepilnih zavihkov) x2 Krožna rezila (vzdolžno odstranjevanje odvečnega kartona — izrez okna) x2 Orodje za izdelavo ročajev (izdelava lukenj, izsekavanje) Orodje za prečno rezanje Flexo tiskarski modul — enobarvni, 300 x 470 mm (opcijsko) Lepljenje — sistem hladnega lepila (opcijsko)