Ostas Stroj Za Valjane Pločevine nakup rabljenega (100.325)

Stanje: rabljeno, Pivoting Bending Machine KRAMER Type A-Maut. II 1000 Serial No. 48 287 Year of manufacture: 1990 Working length: 1060 mm Max. sheet thickness: 3.75 mm Stroke of upper beam: 180 mm Adjustability of bending beam: 60 mm Back gauge: 480 mm Drive power, bending beam: 4 kW Drive power, upper beam: 1.5 kW Kjdpjfnabysfx Af Ssnb Power supply: 400 Volt, 50 Hz - Manual and semi-automatic control - Angle adjustment via preset angle selector disc - One-piece sharp rail 135° - Back gauge with handwheel adjustment and simple measuring scale - Continuous stop rail - 3-way electric foot switch Required space (L x W x H): 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. Knsdpfsd Ixadsx Af Ssb The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Knsdpfx Afsd Ev Upe Seb Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: novo, DM100 ZC – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching of metal workpieces ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore hardness) with an abrasive belt, effectively removing heavy burrs in the initial step. The second station features two counter-rotating cross belts with abrasive blocks, which round off the edges of the entire product, both internally and externally, in a second step. Knedpfx Aed Hintef Sob A major advantage is the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical specifications – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Stanje: dober (rabljeno), Vreteno: 130 mm Pomik X: 5000 mm Pomik Y: 2500 mm Pomik Z: 1000 mm Rotacijska miza: 2000 x 2500 mm, približno 30 ton S čelno ploščo Vertikalna glava Kjdpfsy D Tvgox Af Senb Nekatera orodja Brez ploščnega polja

Stanje: novo, Sheet width: 700 mm Sheet thickness: 4.0 mm Frame opening: 720 mm Top roller diameter: 95 mm Connected load: 1.1 kW Machine weight: approx. 0.37 t Knodpfx Afewfyqys Sjb Space requirement: approx. 0.95 x 0.76 x 1.25 m Special size plate bending machine: - Capacity: 700 x 4 mm - Conical bending - Swiveling top roller - Emergency stop safety cable - Documentation - 400 V

Stanje: novo, Sheet width 700 mm Sheet thickness 2.0 mm Stand width 750 mm Top roller diameter 76 mm Total power requirement 0.75 kW Machine weight approx. 0.29 t Required space approx. 1.3 x 0.8 x 1.3 m Sheet metal bending machine with: - Capacity 700 x 2 mm - High-strength, forged steel rollers with SAE 1050 certification Ksdpfxjrrkdko Af Sjnb - Top and bottom rollers powered, pinch roller without drive - Foot pedal control - Conical bending function - Swing-out upper roller - Emergency stop safety cable - Documentation - CE marking - 400 Volt

Stanje: novo, Širina pločevine 1000 mm Knjdpfx Ajrb Hcbjf Seb Debelina pločevine 3,3 mm Razdalja med stojali 1050 mm Premer zgornjega valja 90 mm Skupna potrebna moč 1,1 kW Teža stroja cca 0,445 t Prostorska zahteva cca 1,5 x 0,9 x 1,25 m Stroj za upogibanje pločevine s posebnimi dimenzijami: - Kapaciteta 1000 x 3 mm - Konusno upogibanje - Zgornji valj je izklopljiv - Varnostna naprava s potezno vrvico - Dokumentacija - 400V

Stanje: novo, Širina pločevine 1070 mm Debelina pločevine 9,0 / 10,0 mm Razdalja med stebri 1070 mm Kodpjw In A Iofx Af Sjnb Premer zgornjega valja 190 mm Kapaciteta upogibanja 9,0 mm Priključna moč 5,3 kW Teža stroja pribl. 2,4 t Potrebni prostor pribl. 2,7 x 0,92 x 1,2 m Stroj za upogibanje pločevine s profilno upogibno enoto - Električno nastavljiv zadnji valj - Električno nastavljiv spodnji valj (napenjanje materiala) - Digitalni prikaz premikanja zadnjega valja - Digitalni prikaz premikanja spodnjega valja (prijem materiala) - Kaljeni valji - Konusno valjanje - Zgornji valj z možnostjo nagiba - Zavorni motor - Nujna zaustavitev - Dokumentacija v angleščini - 400 V

Stanje: rabljeno, Leto izdelave: 1986, Širina pločevine 2040 mm Debelina pločevine 4,0 mm Razmik med stojali 2100 mm Premer valjev 150 mm Knodey Ezzyjpfx Af Seb Skupna potrebna moč 7,0 kW Teža stroja cca 2,2 t Potrebni prostor cca 2,95 x 1,0 x 1,75 mm Stroj za ukrivljanje pločevine s 3 valji - 2 pogonska valja - zadnji valj električno nastavljiv - konično ukrivljanje - nožno stikalo - naprava za izklop v sili

Stanje: novo, Sheet width: 1070 mm Sheet thickness: 3.0 mm Frame width: 1100 mm Top roller diameter: 95 mm Knsdpfx Afohfhzvs Seb Total power requirement: 1.1 kW Machine weight: approx. 420 kg Space requirement: approx. 1600 x 800 x 1200 mm Motorized sheet bending machine with: - Foot switch for left/right operation - Manually adjustable rear roll - Hardened rollers - Conical bending capability - Swiveling top roller - Safety emergency stop cable - Documentation currently only available in English - 400V

Stanje: novo, Sheet width 610 mm Sheet thickness 1.0 mm Frame opening 620 mm Top roller diameter 38 mm Total power requirement manual operation Kodpjupxi Tsfx Af Sonb Machine weight approx. 40 kg Space requirement approx. 950 x 270 x 360 mm Sheet metal bending machine featuring: - Capacity 610 x 1.0 mm - Swiveling top roller

Stanje: novo, Sheet width 1000 mm Sheet thickness 3.3 mm Stand width 1050 mm Top roll diameter 90 mm Knjdpfxjrb Hcfs Af Ssb Total power requirement 1.1 kW Machine weight approx. 0.39 t Space requirement approx. 1.4 x 0.9 x 1.2 m Sheet bending machine with special dimensions: - Capacity 700 x 3.5 mm - Conical bending - Swiveling top roll - Emergency stop safety cable - Documentation - 400V

Stanje: novo, Sheet width: 700 mm Sheet thickness: 4.0 mm Knodpfx Afofv H Axe Sob Frame opening: 720 mm Upper roll diameter: 95 mm Total power requirement: 1.1 kW Machine weight approx. 0.37 t Space requirement approx. 0.95 x 0.76 x 1.25 m Sheet metal bending machine with special dimensions: - Capacity: 700 x 4 mm - 2 speeds - Electrically adjustable rear roll - Digital display for rear roll - Hardened rolls - Conical bending - Swing-out upper roll - Emergency stop safety cable - Documentation - 400V

Stanje: rabljeno, Leto izdelave: 1995, Sheet width: 2100 mm Sheet thickness: 2.0 mm Frame opening: 2150 mm Roll diameter: 90 mm Total power requirement: 1.5 kW Machine weight: approx. 0.7 t Space requirement: approx. 2.5 x 0.7 x 1.3 m 3-roll bending machine Knsdswrzrropfx Af Ssb - 2 powered rolls - Foot switch - Emergency stop device

Stanje: novo, Širina pločevine 1000 mm Debelina pločevine 3,0 mm Razdalja med stojali 1050 mm Premer zgornjega valja 90 mm Skupna potrebna moč 1,1 kW Ksdpfeyv I Izjx Af Senb Teža stroja ca. 0,47 t Potrebni prostor ca. 1,7 x 0,8 x 1,35 mm Stroj za upogibanje pločevine s posebnimi merami: - Kapaciteta 1050 x 3,0 mm - Digitalni prikazovalnik - Kaljeni valji - Konusno upogibanje - Izklopni zgornji valj - Zaviralni motor - Varnostna naprava z izrednim varnostnim kablom - Dokumentacija v angleščini - 400V

Stanje: novo, Sheet width 1000 mm Sheet thickness 8.0 mm Stand width 1070 mm Top roll diameter 150 mm Pre-bending capacity 6.0 mm Connected load 4.0 kW Machine weight approx. 1.4 t Space requirement approx. 2.6 x 0.65 x 1.1 m Plate bending machine with section bending attachment - Electrically adjustable rear roll - Electrically adjustable lower roll (material clamping) - Digital display for rear roll movement - Digital display for lower roll movement (material clamping) - Hardened rolls Kedofv H A Hspfx Af Ssnb - Conical bending - Swiveling top roll - Brake motor - Emergency stop - Documentation in English - 400 V

Stanje: novo, Sheet width: 1570 mm Sheet thickness: 10 mm Pre-bending: 8 mm Total power requirement: 7 kW Machine weight: approx. 4.5 t Space requirements: approx. 3.5 x 1.5 x 1.55 m – 4 rolls – Capacity: 1570 x 10 mm – Pre-bending: 8 mm – Hardened rolls – Top roll diameter: 220 mm – Bottom roll diameter: 220 mm – Side roll diameter: 180 mm – Hydraulic operation – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement – Top roll hydraulically swing-out – ST-52 steel construction – Hydraulic drop-end for easy roll positioning – Hydraulic up and down movement system with central and side rolls – Hydraulic balancing system – Overvoltage protection Kjdpfxevkixxs Af Senb – Documentation – 400V

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.500 mm, vrsta vhodnega toka: trifazni, najv. debelina pločevine: 100 mm, najv. debelina jeklene pločevine: 100 mm, maks. debelina aluminijaste pločevine: 100 mm, najv. debelina bakrene pločevine: 100 mm, maks. debelina medeninaste pločevine: 100 mm, skupna dolžina: 2.830 mm, skupna širina: 2.100 mm, skupna višina: 2.000 mm, teža obdelovanca (maks.): 500 kg, skupna masa: 2.700 kg, delovna višina: 100 mm, vhodna napetost: 400 V, trajanje garancije: 12 meseci, dolžina mize: 2.000 mm, širina mize: 1.500 mm, višina obdelovanca (maks.): 100 mm, vhodna frekvenca: 50 Hz, širina obdelovanca (maks.): 1.500 mm, obratovalna hitrost: 33 mm/s, višina mize: 1.010 mm, premer brusilnega koluta: 150 mm, širina brušenja: 1.500 mm, vrsta nastavitve višine: mehanski, vhodni tok: 61 A, prehodna širina: 1.500 mm, Oprema: CE označba, Na voljo je tipska ploščica, Polnische Entgratmaschine – Direkt vom Hersteller Wir präsentieren mit Stolz unsere hochwertigen Entgratmaschinen, die in Polen von Madora Sp. z o.o. hergestellt werden – einem renommierten und erfahrenen Unternehmen, das auf Metall- und Holzbearbeitungsmaschinen spezialisiert ist. Mit jahrzehntelanger Erfahrung und Innovationskraft ist Madora bekannt für langlebige, effiziente und bedienerfreundliche Lösungen, die auf die Anforderungen industrieller Kunden in ganz Europa zugeschnitten sind. Ksdpfx Ajwzvkhsf Senb Unsere Maschinen stehen für Präzision, Leistungsfähigkeit und langfristige Zuverlässigkeit – und das zu wettbewerbsfähigen Preisen. Die GP 1500 3Z ist eine herausragende, universell einsetzbare Entgratmaschine zur Reinigung von Blech nach den unterschiedlichsten Trennverfahren. Sie verfügt über insgesamt drei Bearbeitungseinheiten vom Typ "Z" und zeichnet sich durch hohe Vielseitigkeit und Bearbeitungskapazität aus. Was heißt das in der Praxis? Das bedeutet, dass sie bis zu drei Arbeitsgänge zugleich ausführen kann: Sie entfernt nicht nur Zunderschichten/Schlacke nach dem Plasmaschneiden, sondern ermöglicht auch das Entgraten und Verrunden von Kanten nach dem Laserschneiden – alles in einem Arbeitsgang. Dank eines großen Bereichs für die Materialstärke und einer Arbeitsbreite von bis zu 1.500 mm lassen sich sowohl kleine als auch große Werkstücke bearbeiten. Mit passenden Werkzeugen ist die Maschine zudem für starkes Verrunden der Kanten sowie das Entfernen von Oxidschichten geeignet. Die Entgratmaschine GP 1500 3Z ist mit einem TFT-Touchscreen-Bedienfeld ausgestattet, das dem Bediener die vollständige und kontinuierliche Kontrolle über Bearbeitungsparameter wie Werkstückhöhe, Vorschubgeschwindigkeit und Werkzeugdrehzahl ermöglicht. Jede Bearbeitungseinheit lässt sich separat ansteuern, sodass der Bediener frei entscheiden kann, welche Bearbeitungsvorgänge in einem Durchgang ausgeführt werden.

Stanje: novo, ROGI PR-1300 ELECTRIC ROLL BENDING MACHINE Heavy-duty and robust construction Knjdpfx Afjga Tvws Sob Weight: 800 kg Equipped with hardened rolls Roll hardness: HRC 28–32 Min. sheet thickness: 0.5 mm Max. sheet thickness: 3 mm Max. working width: 1300 mm Pre-bending capacity: 2.5 mm Roll diameter: 95 mm Motor power: 2.2 kW INCLUDES * Hardened rolls * SCHNEIDER electrical components

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, vrsta vhodnega toka: trifazni, najv. debelina pločevine: 100 mm, najv. debelina jeklene pločevine: 100 mm, maks. debelina aluminijaste pločevine: 100 mm, najv. debelina bakrene pločevine: 100 mm, maks. debelina medeninaste pločevine: 100 mm, skupna dolžina: 1.500 mm, skupna širina: 1.100 mm, skupna višina: 1.700 mm, teža obdelovanca (maks.): 500 kg, skupna masa: 680 kg, delovna višina: 100 mm, vhodna napetost: 400 V, trajanje garancije: 12 meseci, dolžina mize: 1.300 mm, širina mize: 600 mm, višina obdelovanca (maks.): 100 mm, vhodna frekvenca: 50 Hz, širina obdelovanca (maks.): 600 mm, obratovalna hitrost: 33 mm/s, višina mize: 1.010 mm, premer brusilnega koluta: 150 mm, širina brušenja: 600 mm, vrsta nastavitve višine: mehanski, vhodni tok: 20 A, prehodna širina: 600 mm, Oprema: CE označba, Na voljo je tipska ploščica, dokumentacija / priročnik, Polnische Entgratmaschine – Direkt vom Hersteller Wir freuen uns, Ihnen unsere hochwertigen Entgratmaschinen vorstellen zu können, die in Polen von der Firma Madora Sp. z o.o. hergestellt werden – einem zuverlässigen und erfahrenen Unternehmen, das sich auf Metall- und Holzbearbeitungsmaschinen spezialisiert hat. Mit jahrzehntelanger Erfahrung und Innovationskraft ist Madora bekannt für langlebige, effiziente und bedienerfreundliche Lösungen, die auf die Bedürfnisse industrieller Kunden in ganz Europa zugeschnitten sind. Unsere Maschinen stehen für Präzision, Leistungsfähigkeit und langfristige Zuverlässigkeit – und das zu wettbewerbsfähigen Preisen. Kedpfx Afjwzu A Ns Sonb Das kleinste Modell der MADORA-Baureihe, die GP 600 2Z, ist eine vielseitig einsetzbare Entgratmaschine zur Reinigung von Blech nach verschiedenen Trennverfahren. Ausgestattet mit zwei Bearbeitungseinheiten vom Typ „Z“ besticht sie durch hervorragende Vielseitigkeit und Bearbeitungskapazität. Die Entgratmaschine führt zwei Arbeitsgänge gleichzeitig aus: Sie ermöglicht nicht nur das Entfernen von Zunder nach dem Plasmaschneiden, sondern auch das Entgraten oder Verrunden von Werkstückkanten nach dem Laserschneiden – alles in einem Durchlauf. Der Arbeitsbereich für Materialdicken und Breiten bis 600 mm ermöglicht das Bearbeiten von kleinen und mittelgroßen Werkstücken. Mit entsprechenden Werkzeugen eignet sich die Maschine auch für schweres Verrunden von Kanten und das Entfernen von Oxidschichten. Die GP 600 2Z ist mit einem elektrischen Bedienfeld mit Digitalanzeige ausgestattet, das es dem Bediener erlaubt, sämtliche Bearbeitungsparameter wie Werkstückhöhe, Vorschubgeschwindigkeit und Drehzahl der Werkzeuge vollständig und stufenlos zu steuern. Jede Bearbeitungseinheit kann unabhängig angesteuert werden, sodass der Bediener individuell festlegen kann, welche Arbeitsprozesse in einem Durchgang durchgeführt werden sollen.

Stanje: novo, Automatic Sheet and Profile Shot Blasting Machine Primarily used for surface cleaning operations on products such as sheet metal, NPI, NPU, angles, profiles, etc. The parts requiring shot blasting are transported via roller conveyors at both the infeed and outfeed of the machine. Turbines are installed at appropriate angles within the machine body to enable thorough shot blasting of part surfaces from both above and below. A key advantage of this system is the ability to process products quickly. Semi-finished and finished goods can be conveyed efficiently through the roller conveyor and transport system. Knedpfx Aoghaywjf Sjb The digital speed control integrated into our machines enables adjustment for each load according to the type of workpiece and the required blasting surface. The machine is engineered and manufactured based on the size, weight, and daily throughput requirements of the components to be shot blasted. Conveyor lengths can be extended or shortened upon request.

Stanje: dober (rabljeno), Leto izdelave: 2017, Naprodaj / na zahtevo: - Kaak Driem linija 1 - Kaak Proofer + Euroclima - Kaak Driem linija 2 - AMF / Den boer peč (peč z visokotemperaturnim direktnim ogrevanjem) - Stelram transportni trakovi - Hladilni tunel + ICS chiller - 2x ABB pick and place robota - 2x Fuji pakirni stroji Skupna delovna širina: 1200 mm Leto izdelave: 2017 Na voljo dokumentacija in programska oprema. Možen ogled na lokaciji Za dodatna vprašanja ali informacije nas kontaktirajte. Ksdpfx Aey Rkrrjf Ssnb

Stanje: dober (rabljeno), Leto izdelave: 2011, Edges and contours - Deburring machine ROLEI Type: 00645-KKE2, year 2011. Knjdpfx Afewnpfls Seb

Stanje: novo, Very robust motorized 3-roll plate bending machine Weight: 670 kg Equipped with hardened rolls Roll hardness: HRC 28-32 Minimum sheet thickness: 0.5 mm Maximum sheet thickness: 3 mm Maximum working width: 1,000 mm Pre-bending: 2.5 mm Roll diameter: 95 mm Motor power: 1.5 kW INCLUDES * Hardened rolls Knedpfx Afega Tz As Sob * SCHNEIDER electrical components