Zasukačna upogibanka, kantbank, stroj za upogibanje pločevine

KRAMER A-Maut. II 1000

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Technical Data: Maximum cutting width: 3100 mm Maximum cutting capacity with St40 steel: 15.0 mm Motorized adjustable back gauge: 1500 mm Motorized adjustable cutting gap Adjustable cutting angle Working height: 860 mm Motor power: 22 kW Side safety guard with rear light barrier Dimensions (L x W x H): approx. 4650 x 3600 x 2050 mm Weight: approx. 13.5 t Hjdpfeummw Tsx Af Tsng We are only able to display a small selection of our current range of used machines here. Please also visit our homepage! The seller accepts no liability for typing or data transmission errors. The machine's condition regarding appearance, technology, and wear is consistent with its age; used machines are sold without any guarantee.

Stanje: novo, Leto izdelave: 2023, The B-Series is suitable for bending your reinforcing steel into the desired shape. B-Series: B26, B36, B45X1, B50 BS-Series (double bending): BS36, BS45, BS50, BS60 (MG65 PRO) Product information: - Voltage: 380 V (16 A) - Motor power: 2.2 kW – 6 kW - Ideal for your construction company or for use on your construction sites - Left-right bending possible (in the BS models) - In addition to single bending, a bending sequence can also be programmed - Inserts for different rebar diameters are included in the accessories (incl. accessories) - Can be operated in automatic or manual mode - Bending capacities depending on steel strength according to table (see images) Hnodjm Shffepfx Af Tsg - Optionally available with digital control panel - Net weight: 215 kg – 850 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, feel free to contact us!

Stanje: rabljeno, Leto izdelave: 2006, Technical details: Maximum bending angle: 75° Working height: 850 mm Operating voltage: 380 V Machine weight approx.: 1.0 t Machine dimensions (LxWxH): approx. 1.9 x 2.6 x 1.0 m Machine transport dimensions: 2.6 x 1.8 x 1.0 m Single and double bending of reinforcing steel possible. Number of bending formers: 2 pcs. Bending angles: 40°, 60°, 75° Bar diameter: angle form = Ø 12 - 50 mm, double angle = Ø 12 - 35 mm Operation via control panel with touch screen Bending plate: - Ø 480 mm - Rotational speed: 7.5 / 15 rpm - Pin holes: Ø 48 mm (16 pcs.) - Center pin: Ø 50 x 94 mm Stop bars: - 2 pcs., length: 840 mm - Manual adjustment: 100 mm - 13 holes, Ø 48 mm Accessories: Hnedeu Ibu Repfx Af Tsg Bending formers: 2x Ø 60 mm; 2x Ø 78 mm; 1x Ø 96 mm; 1x Ø 122 mm; 1x Ø 160 mm; 1x Ø 200 mm 1x pin for bending plate 8x counterholders (various forms) 1x bending tray

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: 01-15792, Offer 24194 Technical Specifications: - Max. working width: 2040 mm - Max. material thickness: 2 mm - Bending angle: approx. 0 - 135° - Bending angle lockable with end stop Hsdpfx Astylgujf Tsng - Upper beam operated by side hand crank - Max. upper beam stroke: 85 mm - Max. adjustment of bending beam: 80 mm - Bending operation assisted by eccentric weight - Required space: approx. W 3250 x H 1250 x D 450 mm - Weight: approx. 1620 kg

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 620 h, Little-used and well-maintained Komatsu PC 20 R-5 Mini Excavator Technical specifications: * Operating weight incl. equipment approx. 2,000 kg * Komatsu 3D67E-2A engine with 11.8 kW * Overall length 3,845 mm * Overall height 2,370 mm * Overall width (minimum) 1,280 mm (990 mm) * Track width 230 mm * Tail swing radius 1,120 mm * Total track length 1,570 mm * Max. digging reach 4,100 mm * Max. digging depth 2,370 mm * Minimum swing radius 1,515 mm Features included: * 2 travel speeds with auto-shift-down * Servo control * Long dipper stick * Auxiliary hydraulic circuit (2-way) to boom (switchable to breaker mode) * Protective cover on boom lift cylinder * Work light on the boom * Dozer blade * Acoustic travel alarm * Tool kit * CE conformity * Cab with heating * 1x standard hydraulic line (with pedal) * Suspension seat with 2-point seat belt * Rubber tracks * Mechanical quick coupler LEHNHOFF MS01 + load hook Other information: * Attachments NOT included – sale on request Hedpfx Afsrwvvyo Tsng

Stanje: novo, Article: Welding Positioner 50 kg Type: KT-50 without chuck Max. load: 50 kg horizontal Max. load: 25 kg vertical Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilting angle: 0–90° Hnsdpfsbambrox Af Tog Motor power (operating): 0.08 kW Motor power (standby): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60Hz Price does not include quick-release chuck and height-adjustable workbench Surcharge for quick-release chuck: €195 Packaging and shipping within Germany: approx. €80

Stanje: rabljeno, Cisaille guillotine hydraulique STEINER type HTS 30/20 R N° de machine : 315 Année : 1982 Longueur de coupe : 3050 mm Hnodpfx Afod Hxx Ae Teg Épaisseur de coupe : 20 mm Butée arrière : 800 mm motorisée Puissance moteur : env. 30 kW Alimentation : 400 V, 50 Hz - Butée arrière avec commande de positionnement ELGO - Réglage de la butée arrière par vis à billes - Barrière immatérielle de sécurité SICK à l’avant comme protection contre l’intrusion - 3 bras-supports de tôle avec rouleaux à billes - Pédale électrique - Lames de rechange - Refroidisseur d’huile avec échangeur thermique à air - Machine très massive, construction très robuste Encombrement de la machine de base (L x l x h) : 4650 x 2610 x 3200 mm Poids de la machine de base : 27 000 kg Dimensions de transport (machine de base) (L x l x h) : 4650 x 2610 x 3200 mm Dimensions de transport (supplémentaire) (L x l x h) : 3500 x 2450 x 1400 mm Poids total : 27 000 kg Bon état Machine visible dans notre dépôt à 37235 Hessisch Lichtenau, essais de coupe possibles.

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Hnodpfx Ast Iklkjf Tjg Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Contact length stop Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, vhodna napetost: 400 V, skupna masa: 3.560 kg, višina obdelovanca (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm in width. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet components. With the SER600 Super Edge Rounder from Q-Fin, you can deburr, grind, edge break, round, deslag, remove oxide layers, or perform linear finishing on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput capacity of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model comes equipped with a magnetic support, making it ideal for processing flame-cut steel parts and other magnetic materials. The machine features 5 processing stations. It is operated easily via the HMI touchscreen panel located at the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this unit removes burrs and/or burn marks from the product surface. If there are no burrs, the abrasive belt can be omitted or removed. It is also possible to process your product with a finer abrasive belt or finish with a Scotch-Brite belt. The second and third stations feature a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations consist of 2 round brushes rotating in opposite directions (left and right). The brushes break the sharp edges of the product or, thanks to the unique combination of two brush systems, can round edges up to a radius of R=3 mm. With special brushes installed, the SER600 with magnetic system can also efficiently remove oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set.' The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless-steel extraction system operates wet, removing grinding dust from stainless steel, mild steel, and aluminum, thereby eliminating fire and explosion hazards. According to Q-Fin, this is the safest, simplest, and most sustainable solution for extracting grinding dust. The WES6000 ensures there is no grinding dust in the air and/or the work environment. Hedpfxol Dw D Eo Af Tsng Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x very slightly used, like new (year of manufacture 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the frame and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - SER600 electrical connection: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Stanje: delavnici obnovljeno (rabljeno), potovalna razdalja osi X: 10.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 2.100 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 36 obr/min, največja hitrost vrtenja: 6.000 obr/min, kapaciteta rezervoarja: 1.200 l, SHW Powerspeed 5 Hedpfxsv Dhw To Af Tsng Travels • X-axis (bed): 10,000 mm • Y-axis (ram): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y, and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head swivel range (mount): 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Conveyor length: 10,000 mm Coolant system • Tank capacity: 1,200 liters ATTENTION: Images are sample illustrations for reference only About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - Control modernization _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC mill - CNC milling machines - CNC milling machines - milling machine - large component machining - large part machining - CNC large part machining - milling - SHW - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine