Fanuc Sr Mate 100I Z Nadzornim Sistemom Rj2 nakup rabljenega (58.205)

Leto izdelave: 2008, stanje: rabljeno, Panel return system for use with a single edge banding machine Ibjdpfx Aferxzb Reasa The panel is transported to the operator via a motorized conveyor belt and a roller/conveyor table. Moeller mini control unit Maximum panel dimensions: 2500 x 1450 mm Maximum panel height: 60 mm Working speed: 8 - 25 m/min Working height from floor: 835 - 960 mm

Leto izdelave: 2010, stanje: rabljeno, Panel return system for use with a single edge banding machine The panel is transported to the operator via a motorized conveyor belt and a roller/conveyor table. Moeller mini control unit Maximum panel dimensions: 2500 x 1450 mm Maximum panel height: 60 mm Ijdpfx Aerq Dmrsfaeba Working speed: 8 - 25 m/min Working height from floor: 835 - 960 mm

Stanje: rabljeno, Panel return system for use with a single-edge banding machine. The panel is transported to the operator via a motorized belt and a roller/belt table. Equipped with a Moeller mini control unit. Maximum panel dimensions: 2500 x 1450 mm. Maximum panel height: 60 mm. Working speed: 8 - 25 m/min. Working height from the floor: 835 - 960 mm. Ijdpsw Ahixsfx Afaoba

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040685, Special features: Retrofit to WIN10 – NEW – with 6-month warranty on the PC and UPS WATER-COOLED spindle 9.5 kW S1 3-layer machining possible Meticulously cleaned and overhauled – excellent condition Description: Graphical user guidance and graphical service support A-axis for stepless top-side machining – swivel range 180° HSC milling spindle for speeds up to 24,000 rpm large machining width standard with clamp detection and automatic clamp positioning 8 tool holders Complete profile machining with stationary profile bar Fast basic positioning of the machining unit (up to 64 m/min) on the X axis robust and low-wear direct drive protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk dedicated PC keyboard Remote maintenance via TCP/IP (internet connection required) Technical data: Max. machining length without end machining: 7,600 mm Max. machining length with end machining: 7,500 mm (depends on tool) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel range A-axis freely programmable in 0.1° steps: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle output: 9.5 kW S1 Tool holder: HSK F 63 Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse protection: 35 A Tool positions for 8 tools Included accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Spray dosing unit Protective hood Front light barrier Safety fence left and right Central chip extraction 2 pneumatic material stops 3-circuit clamping system Iodoy Ah Tkepfx Afajba Length measurement for profile bars Barcode scanner with wireless transmission Special version with light barrier Further options available on request: Programming software (office) eluCad, including hotline contract for 6 months 3D import license for a machine of category “L” Data import package license for a machine of category “L” CSV import license for a machine of category “L” Macros hashing license for a machine of category “L” Other information: The machine is handed over ready for transport, including transport locks and loading onto lorry In addition, we optionally offer the following services on request: Assembly and commissioning Machine training 4/5-axis training package for machine and eluCad

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 485 mm, pomik po osi Z: 340 mm, skupna višina: 2.000 mm, skupna širina: 1.600 mm, skupna masa: 5.500 kg, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 6.000 W, največja dolžina izdelka: 7.500 mm, število osi: 3, Cette Elumatec SBZ 131 à 3 axes a été fabriquée en 2010. Elle offre un déplacement impressionnant de l’axe X de 4 200 mm, un déplacement de l’axe Y de 485 mm et un déplacement de l’axe Z de 340 mm. La machine est équipée d’une tête porte-outil rotative à 8 positions et d’une vitesse de broche maximale de 6 000 tr/min. Si vous recherchez des capacités d’usinage de profilé de haute qualité, envisagez le centre d’usinage de profilés CNC Elumatec SBZ 131 que nous proposons à la vente. Contactez-nous pour plus de détails. • Commande : PC industriel avec logiciel eluCam ; moniteur couleur 15" • Tourelle/porte-outil : tourelle rotative à 8 positions avec changeur d’outils à 8 positions • Avance rapide : X 60 m/min ; Y 30 m/min ; Z 30 m/min • Interface outil : BT30 • Systèmes de pinces : ER25 / ER32 Ibodpfxoyt Ifys Afaja • Diamètre de lame de scie : env. 300–420 mm Caractéristiques techniques Taille du cône BT 30

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 400 mm, pomik po osi Z: 300 mm, skupna masa: 9.000 kg, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 5.500 W, število osi: 3, This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret tool changer. If you are looking for high-quality profile machining capabilities, you should consider the Elumatec SBZ 130 CNC profile machining center we are offering for sale. Contact us for further details. • Control system: Ferrocontrol CNC • Max. machining length: approx. 4200 mm • Machining length with end machining: approx. 4080 mm Ibedpjyt Hg Njfx Afaja • Spindle: • Type: high-speed milling spindle • Tool system: • Tool changer: turret head • Tool positions: 8

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, elumatec SBZ150 Profile Machining Center 6.0 m 5-axis control. Efficient machining of aluminum and steel profiles Ibsdow A Rv Ispfx Afaja Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit along the X-axis; Low-wear direct drive; Automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Rigid machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, of which 3 axes are trajectory controlled; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angle of A and C axes freely programmable; With color monitor and floppy disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connectivity; Barcode scanner, Label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer's administrator) Analog modem (customer must provide analog phone line) Technical data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on milling area, see drawing no. 150 05 17 08 Max. machining length for face machining, left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from reference taper dimension Included accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with arbor Angle milling head Important: The profile machining center is equipped as standard with front light barriers. Any required lateral and rear safeguarding must be provided by the customer or please inquire about our safety fence options. Incl. Angle milling head for underside machining

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, doseg roke: 1.300 mm, Popoln paket za vašo avtomatizacijo varjenja z najnovejšo robotsko serijo UR10e – prosimo, ne kupujte več serije CB. Želite svojo varilnico avtomatizirati s Cobotom, da boste kos prihodnjim izzivom? Potem je rešitev OH-au2mate Cobot Welding Solutions z varilnim izvorom Lorch prava izbira za vas! Ta popolno usklajen paket združuje: - visokokakovostno robotsko tehnologijo vodilnega podjetja na trgu Universal - inovativno varilno tehnologijo Lorch Ibodpfx Afot S U Aueasa - intuitivno programsko opremo za upravljanje Točen paket zajema: robot UR10e pripravljen za varjenje, upravljalne elemente, nosilec gorilnika, varilni izvlečni gorilnik Translas 8XR, varilni izvor Lorch S5 z 400A.

Leto izdelave: 2010, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, SBZ 122/33 Profile Machining Center 3.8 m, WK 4x90°, eluCam Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to preserve the visible profile surface. Ibjdpfx Afew Dzagjasa Latest generation CNC 3-axis control with industrial PC based on Windows XP 15" flat-screen monitor and 2 USB ports for online connectivity, barcode scanner, and label printer. Network connection: RJ 45 10/100 MBit User-friendly input via eluCam 3D visualization Fast positioning of the machining unit (up to 60 m/min) along the X-axis thanks to robust and low-wear direct drive. High-resolution absolute encoders allow axis referencing unnecessary. Technical Data: X-axis travel range: 3800 mm Max. travel speed: 60 m/min Y-axis travel range: 350 mm Max. travel speed: 30 m/min Z-axis travel range: 280 mm Max. travel speed: 30 m/min Max. machining length for facing operations left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Milling spindle speed: 1 – 24,000 rpm Spindle output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard tool holders and 1 holder for rotating angle head). Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool holders (tools not included) Safety fence left and right Front light barrier 4 horizontal pneumatic material clamping units Automatic clamp positioning 1 foldable material stop Central chip disposal with chip bin Dosing spray device Milling spindle with integrated rotation unit for angle head Rotating angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Important: The profile machining center is supplied as standard with a front light barrier system. Side protection is provided by safety fences. If rear protection is required, this must be arranged by the customer, or request an offer for our safety fences. Including: Profile bar length measurement Additional automatic tool changer Various tool holders and used cutters

Leto izdelave: 2018, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Machine Information: The machine comes from a metalworking company specializing in the production of aluminium windows, doors, and façades. It was purchased in 2018 to relieve several 5-axis machines, specifically for aluminium entrance door manufacturing. Due to internal restructuring, the machine was no longer used and became available. The machine has been carefully cleaned, inspected, and serviced on the premises of Weyand. All worn components have been replaced. Programming can be done either directly at the machine (eluCam) or via the included office software eluCad. The software option package for data import of ECW, NCW, and V6 files (e.g., LogiKal or Wictop) is also included. Machine Description: - Efficient machining of aluminium, plastic, and steel profiles - A-axis infinitely adjustable from -120° to +120° - Linear guides for clamp shifting - Enhanced machining results through intelligent control technology - Rapid positioning of the machining unit (up to 120 m/min) via dynamic servo drives - Thread cutting without floating tap holder - Automatic clamp recognition and positioning - Automatic tool changer - 4-axis control - No referencing run required for main axes thanks to absolute encoder systems - Collision avoidance via automatic clamp detection and positioning - Power torque milling motor with closed-loop speed control for short spindle acceleration and braking times - Certified, drive-integrated safety functions Low power consumption due to intelligent control technology. Energy recovery through common DC-link coupling of axis drives with feedback and buffering of braking energy. Green-Line cooling unit for control cabinet with reduced energy consumption - Windows operating system - 15" flat panel display, USB ports and network connection - Simple and user-friendly programming via eluCam at the operator terminal, even during machining operations - Remote maintenance via TCP/IP with available internet connection Equipment: - Operator safety enclosure - Four horizontal pneumatic clamping systems - Material stop left - Minimal quantity lubrication system - Handheld control device - Depth gauge Iedpsyr H Abofx Afasba Technical Data: - Max. machining length without end-face operations: 4,050 mm - X-axis travel: 4,176 mm, Vmax 120 m/min - Y-axis travel: 1,040 mm, Vmax 60 m/min - Z-axis travel: 540 mm, Vmax 30 m/min - Machining directions 3+2 (top, rear, front) - Positioning accuracy: +/- 0.1 mm - Milling spindle speed: max. 20,000 rpm - Milling spindle power: 7 kW, S1 (water-cooled) - Tool interface: HSK-F63 - Automatic tool change - Twelve tool positions in the automatic magazine - Max. disc milling cutter diameter: 120 mm - Max. tool length (from taper): 150 mm - Automatic clamp shifting - Basic clamp (with round guide) - Software: eluCam - Compressed air connection: >7 bar - Electrical connection: 400 V, 50 Hz, 22 A - Air consumption per minute (with spraying): approx. 185 l Accessories included (used): - Full enclosure SBZ122/7x (rear wall + roof) - Complete HSK-F63 d16 L=155 holder for disc milling cutter - Disc milling cutter D=92x6.0 mm, Z=14, d=16, carbide teeth - Right stop SBZ 122170171173 with second clamping circuit, for machining oversized parts - Various used tool holders and milling cutters - ESTA chip extraction system eluCad - License for connection to eluCad - eluCad data import package for ECW, NCW and V6 files

Leto izdelave: 2010, obratovalne ure: 11.200 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12222321222, Oprema: Na voljo je tipska ploščica, Obdelovalni center za profile Elumatec SBZ122/33, letnik 2010 Tehnični podatki: Delovno območje X - 3850 mm, Y - 350, Z - 280 mm Elektrovreteno 10 kW - maks. 20000 obr./min, obnovljeno v letu 2023 (RF-HSK-F63 125/125x430 24/6,5) Orodna glava HSK -63 F Menjalec orodij Delovna miza s 4 avtomatsko pozicioniranimi vpenjali Pnevmatsko vpenjanje obdelovancev Fotoelektrična pregrada Ročni operaterski terminal Krmilna plošča s kontrolnim panelom USB povezava Operacijski sistem: Windows 7 Proizvodna programska oprema: EluSoft, EluCAM Ibjdjw Rv A Ujpfx Afaja Numerično krmiljenje – Ferrocontrol Zaščitna ograja z vrati (Laserska varnostna pregrada) Samodejno in centralno mazanje linearnih vodil Teža 1940 kg Skupna moč priključka cca 14 kW Dimenzije stroja 4670 x 2000 x 2540 mm Potreben prostor 5165 x 3000 x 2540 mm Stroj rabljen za obdelavo aluminijastih profilov. Servisiran in pripravljen za delo.

Leto izdelave: 2009, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1223330255, Na prodajo je zanesljivo 3-osno CNC obdelovalno središče profilov Elumatec SBZ 122/33. Stroj je bil uporabljan izključno v visoko kakovostni proizvodnji aluminijastih oken in vrat, zato je redno profesionalno vzdrževan ter nikoli ni bil izpostavljen neustreznim ali zanemarjenim pogojem delovanja. Ta model je industrijski standard za rezkanje in vrtanje aluminijastih, PVC in tankostenskih jeklenih profilov. Oprema deluje brezhibno, ohranja tovarniško natančnost in je popolnoma pripravljena za proizvodnjo. Stroj prodajamo zaradi nadgradnje in modernizacije proizvodnje. Iodjzd R Iqopfx Afajba Resnim interesentom lahko na zahtevo zagotovimo video delovanja stroja. Dodatne informacije: • Ogled: Stroj je trenutno priključen na elektriko in stisnjen zrak. Možen je ogled in preizkus v živo na lokaciji v Kaunasu, Litva. • Nakladanje/Transport: Kupec je odgovoren za organizacijo prevoza, mi pa lahko pomagamo pri nakladanju opreme. Za dodatne informacije ali dogovor o ogledu nas kontaktirajte na objavljeno številko. Cena: 25.500 € + DDV. Možnost dogovora na lokaciji :) Prodaja podjetje, izstavimo EU-račun z DDV (za kupce z veljavno EU številko za DDV zunaj Litve je možen 0% DDV).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 1.280 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 850 mm, pomik po osi Z: 650 mm, največja hitrost vretena: 24.000 obr/min, zasukni kot osi A (maks.): 180 °, DÉTAILS TECHNIQUES Longueur d’usinage max. sans usinage de faces d’extrémité : 4 200 mm Longueur d’usinage max. avec usinage de faces d’extrémité : 4 080 mm Courses Course axe X : 4 200 mm Course axe Y : 850 mm Course axe Z : 650 mm Vitesses de déplacement Vitesse de déplacement axe X : 65 m/min Vitesse de déplacement axe Y : 60 m/min Vitesse de déplacement axe Z : 60 m/min Angle d’inclinaison axe A : 0° - 180° Précision de positionnement Précision de positionnement axe X : ± 0,1 mm Précision de positionnement axe Y : ± 0,1 mm Précision de positionnement axe Z : ± 0,1 mm Précision de positionnement axe A : ± 0,1° Vitesse de rotation max. de la broche : 24 000 tr/min Puissance nominale de la broche : 7 kW S1 Porte-outil : HSK-F63 Diamètre max. de fraise : 80 mm Diamètre max. de fraise à disques : 200 mm DÉTAILS MACHINE Consommation d’air : env. 180 l/min Poids de la machine : 4 200 kg Heures de fonctionnement Heures broche : 1 280 h Iedpfxjw Svmio Afaeba Heures machine : 13 066 h

Stanje: dober (rabljeno), Leto izdelave: 1993, Dvižna zmogljivost: 1000 kg. S priključkom na elektriko. Vakuumska črpalka. Teža: 85 kg. Stanje: dobro, rabljeno. Iedpjx Dr E Dofx Afajba

Leto izdelave: 2005, stanje: dober (rabljeno), Dvo-glava varilna stroj za PVC profile. Ibedpszdqpbjfx Afaja

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), številka stroja/vozila: 6080008264, Zelo dobro stanje (idealno). Isdpszdp Rwjfx Afaeba

Leto izdelave: 2009, stanje: rabljeno, 3-osni obdelovalni center z avtomatsko menjavo orodja za aluminijaste ali PVC profile Maks. pomik X-os: 3.850 mm Maks. pomik Y-os: 350 mm Maks. pomik Z-os: 280 mm Windows krmiljenje z USB priključki Brezstopenjsko nastavljivo število vrtljajev do 22.000 min⁻¹ Ibodpfxsyqyaqj Afaea Ročni upravljalnik Minimalno mazanje s pršenjem Menjalnik orodij z 2 magazinama (skupaj 10 mest plus kotna glava) Prepoznavanje in premik vpenjal 2 svetlobni zavesi in 2 materialna prislona omogočata nihajno delovanje Skupaj 8 vpenjal za material Vreteno v dobrem stanju, sila izvleka vretena: 12 kN Teža: cca. 2.000 kg

Leto izdelave: 2006, stanje: rabljeno, 3-osni obdelovalni center z avtomatsko menjavo orodij za aluminijaste ali PVC profile Maks. pomik X-os: 3.850 mm Maks. pomik Y-os: 350 mm Maks. pomik Z-os: 280 mm Krmiljenje E 550, brezstopenjsko nastavljiva hitrost do 21.000 vrt./min, ročna upravljalna naprava, minimalno pršenje, avtomatska menjava orodja z magazinom (4 mesta plus kotna glava) Isdpfx Ajx Ecfksfasba Spoznava in premik vpenjal: 4 pnevmatski materialni vpenjalci, svetlobna pregrada Teža: pribl. 2.000 kg

Leto izdelave: 2010, stanje: rabljeno, 4-osni obdelovalni center z 8-mestnim avtomatskim menjalcem orodij za aluminijaste ali PVC profile Največja dolžina obdelave: 3.100 mm Pomik Y-osi: 850 mm Pomik Z-osi: 650 mm Nihajni kot A-osi: 0° - 180°, največja hitrost vrtenja 21.000 min⁻¹ Teža: približno 3.000 kg Operacijski sistem Windows 7, minimalno mazanje Zaznavanje in samodejno premikanje vpenjal, 6 pnevmatskih vpenjal za material Iodpfx Afjxvp Nkoaeba Nakladanje je vključeno v ceno

Leto izdelave: 2010, stanje: rabljeno, 3-axis machining center with automatic tool changer for aluminum or PVC profiles Max. X-axis travel: 6,700 mm Max. Y-axis travel: 350 mm Iedswwukxepfx Afasba Max. Z-axis travel: 280 mm Control system: Windows 10 with new computer in 2023 Infinitely variable spindle speed up to 24,000 rpm Handheld control device Minimum quantity lubrication system Tool changer with 2 magazines (a total of 10 stations plus angle head) Clamping detection and movable clamp system 2 pneumatically liftable material stops and 2 light barrier zones, allowing pendulum operation Total of 8 material clamps Spindle is in very good condition, spindle retention force: 12.5 kN Safety fence has been dismantled, but a demonstration is still possible upon arrangement Weight: approx. 3,500 kg

Leto izdelave: 2007, stanje: rabljeno, 5-osni obdelovalni center z menjalcem orodij za aluminijaste ali PVC profile Maks. dolžina obdelave: 9.000 mm Y-premik: 1.150 mm Z-premik: 715 mm Obratni kot osi A: 0° - 180° Kot osi C: 0° - 180° Maks. število obratov: 24.000 min⁻¹ Moč vretena: 21 kW Menjalec orodij s 13 standardnimi in 7 posebnimi orodji Minimalna količina mazanja s pršenjem Ibedpfxexwydbo Afaoa Zaznavanje vpenjalcev in samodejno pomikanje 12 pnevmatskih vpenjalcev materiala Nihajno delovanje z dvema območjema z svetlobnimi zavesami Ročna upravljalna konzola Nakladanje je vključeno v ceno Teža: ca. 8.500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12200991016, vrtljajska hitrost (min.): 24.000 obr/min, skupna masa: 1.635 kg, teža orodja: 2.900 g, vhodna napetost: 400 V, For economical and efficient machining of aluminium profiles, plastics, and thin-walled steel profiles. All machining processes such as milling, drilling, and tapping are performed on a stationary profile, protecting the surface of the profile. Improved performance thanks to the use of intelligent control technology. Fast positioning of the machining unit at speeds up to 60 m/min with dynamic servo drives. Tapping without compensating chuck. Automatic clamp recognition and positioning. Automatic tool magazine with four tool shelves (tools not included). Modern 3-axis control system. Ergonomic operation thanks to a modern slanted bed design. No need for axis referencing with absolute encoder-based systems. Collision avoidance through automatic clamp recognition and positioning. Power-Torque milling spindle with closed-loop speed control ensures short spindle start-up and braking times. Certified drive-integrated safety functions. Low power consumption due to intelligent control technology. Increased energy efficiency through axis drive interconnection between circuits. Emergency power supply (UPS). Windows operating system. 15.6" PC panel, i3 processor, USB ports, and network interface. Easy and convenient program input with eluCam directly on the operator panel—even during machining. Ibodpewgmyqofx Afasa Online remote maintenance. Machine Equipment - Air-cooled milling spindle 8 kW, S1 - Operator protection cabin - Four horizontal pneumatic clamps for material fixation - Material stop, left side - HSK-F63 tool holder - Minimal quantity lubrication - High-performance coolant - Manual control panel - Depth gauge template Options - Tools - Tool holders - Automatic tool magazine for up to four standard tools - Automatic tool magazine for angle head - Rotating angle head HSK-F63 for two tools - Green-line cooling unit for control cabinet with reduced energy consumption - Barcode scanner - Protective cabin, optionally with full enclosure - Four clamps as standard; expandable up to eight clamps - Right reference material stop for processing workpieces with excess lengths - Additional stop for processing excess lengths on the left side - Double-sided length measurement - Dual clamp and additional accessories on request - 18.5" PC panel, i5 processor - 21.6" PC panel, i7 processor - Notepad holder - Soundproof cover - Chip disposal using chip trays

Leto izdelave: 2010, stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 8.500 mm, pomik osi Y: 480 mm, pomik po osi Z: 325 mm, največja hitrost vrtenja: 15.000 obr/min, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNE PODROBNOSTI Pomik X-os: 8.500 mm Pomik Y-os: 480 mm Pomik Z-os: 325 mm Najv. hitrost vrtenja: 15.000 min⁻¹ Vreteno: 5,5 kW Vpenjalo orodja: BT 30 PODROBNOSTI STROJA Izmenjevalec orodij: 8 pozicij OPREMA Orodja Ibjdpfxsypbmij Afaja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.450 mm, pomik osi Y: 400 mm, pomik po osi Z: 380 mm, največja hitrost vrtenja: 6.000 obr/min, premer orodja: 80 mm, TEHNIČNI PODATKI Pomik X-os: 6.450 mm Pomik Y-os: 400 mm Pomik Z-os: 380 mm Obdelovalna dolžina: 6.500 mm Število orodij: 8 kos Vpenjalni sistem orodja: BT30 Čas menjave orodja: 1,2 s Največji premer orodja: 80 mm Število vrtljajev: 6.000 min⁻¹ Podajalna hitrost X: 34 m/min Podajalna hitrost Y+Z: 18 m/min PODATKI O STROJU Skupna priključna moč: 8,5 kW Dimenzije & teža Dimenzije: 9.800 x 3.000 x 2.400/3.300 mm Ibedpfx Afsyg D A Isaoa Teža: 5.400 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1500050285, potovalna razdalja osi X: 7.800 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 630 mm, največja hitrost vretena: 24.000 obr/min, število mest v zalogovniku orodij: 14, Oddanie oferty zobowiązuje do terminowego odbioru w dniu 23.12.2025! DANE TECHNICZNE Przesuw w osi X: 7.800 mm Przesuw w osi Y: 1.000 mm Przesuw w osi Z: 630 mm Posuw szybki oś X: 70 m/min Posuw szybki oś Y: 40 m/min Posuw szybki oś Z: 40 m/min Długość obrabianego elementu (max.): 7.300 mm Prędkość obrotowa wrzeciona (max.): 24.000 obr./min Moc silnika wrzeciona: 15.000 W Liczba wrzecion: 1 Liczba miejsc w magazynie narzędzi: 14 Średnica narzędzi: 100 mm DANE MASZYNY Ibodpfsxx Uf Nsx Afasa Napięcie zasilające: 400 V Rodzaj prądu wejściowego: prąd przemienny (AC) WYPOSAŻENIE Dokumentacja/instrukcja obsługi Magazyn może być wyposażony w dziewięć narzędzi standardowych, pięć narzędzi specjalnych i jedną tarczę piły Dziesięć urządzeń mocujących Dwie oddzielne strefy robocze do pracy wahadłowej Wyświetlacz kolorowy 15" Stacja dyskietek System operacyjny DOS