Center za obdelavo palic

Elumatec SBZ 150

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, elumatec SBZ150 Profile Machining Center 6.0 m 5-axis control. Efficient machining of aluminum and steel profiles Psdow A Rv Iopfx Agxepr Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit along the X-axis; Low-wear direct drive; Automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Rigid machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, of which 3 axes are trajectory controlled; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angle of A and C axes freely programmable; With color monitor and floppy disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connectivity; Barcode scanner, Label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer's administrator) Analog modem (customer must provide analog phone line) Technical data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on milling area, see drawing no. 150 05 17 08 Max. machining length for face machining, left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from reference taper dimension Included accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with arbor Angle milling head Important: The profile machining center is equipped as standard with front light barriers. Any required lateral and rear safeguarding must be provided by the customer or please inquire about our safety fence options. Incl. Angle milling head for underside machining

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Elektronski nadzor osi X Hitrost pozicioniranja osi X (m/min): 25 Pnevmatski nagib glav Zunanji nagib 45° Mehanska nastavitev vmesnih kotov Oljno-pnevmatski pomik žage Uporabna dolžina reza (mm): 4.000 Minimalni standardni rez z dvema glavama pri 90° (mm): 310 Psdpfx Ajyn Adyegxepr Premer žagine plošče (mm): 500 Tipalo

Leto izdelave: 2003, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1500050182, Elumatec SBZ 150 Profile Machining Centre with 5 Axes for Aluminium Profiles 7.3m Due to a switch in our production to a tube laser system, we are selling our fully functional Elumatec SBZ 150. The last service was performed by Elumatec in March 2026, and the machine has not been used since then. Interested parties are welcome at any time—the machine can gladly be demonstrated and tested here on site. Technical specifications: - X-axis travel: 7,300 mm - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0-90°, fully programmable - C-axis swivel angle: 0-355°, fully programmable - Max. machining length without end-face processing: 7,300 mm - Max. machining length with end-face processing: 6,980 mm - Tool changer with 10 stations, plus a saw blade holder - 8 profile clamps - Tool holding system: HSK63 - Spindle power: 15 kW / 22,000 rpm - Double-layer machining - Minimum quantity lubrication system - Central lubrication - Saw blade: 400 mm The machine is available immediately. Required space: see attached layout. Transport instructions are also included in the attachment; if you have any questions, please contact us at any time. Disassembly, loading, and transport for reassembly purposes should preferably be organised by the buyer. Various tools and aids can be made available by arrangement, as far as possible. Ppodoy Dvq Hopfx Agxor All information and dimensions have been provided to the best of our knowledge and belief, but we cannot guarantee their completeness or accuracy! The sale is as inspected, without guarantee, return, or similar. Subject to prior sale.

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 9.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 630 mm, največja hitrost vretena: 24.000 obr/min, številka stroja/vozila: 031809, TECHNICAL DETAILS Travel distance X-axis: 9,500 mm Travel distance Y-axis: 1,000 mm Travel distance Z-axis: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 1/10° increments Swivel angle C-axis: ±182°, freely programmable in 1/10° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Maximum cutter diameter: 100 mm Maximum disc cutter diameter: 100 mm Maximum saw blade diameter: 400 mm Ppedoycul Sopfx Agxor Tool holder: HSK-63F MACHINE DETAILS Compressed air supply: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with spraying EQUIPMENT Machining processes: milling, drilling, tapping, thread milling, punching and sawing with stationary profile bar 6-sided machining: front optional, possible from below Profile bar protection: processing with stationary profile bar Robust and low-wear direct drives in all axes Axes: 5-axis control for spatial machining Monitor: 15-inch colour display Interfaces: USB connections, network connection 2-layer processing for pendulum operation Associated tools (HSK holders) Two circular saws for aluminium Note: Documentation of the machine’s disassembly is enclosed.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1500050123, največja hitrost vrtenja: 18.000 obr/min, delovna dolžina: 12.000 mm, Brez minimalne cene – zagotovoljena prodaja najvišji ponudbi! TEHNIČNI PODATKI Največje število obratov: 18.000 min⁻¹ Obdelovalna dolžina: 12 m Pnevmatske vpenjalne glave: 20 kosov PODROBNOSTI O STROJU Električni podatki Napetost: 400 V Faze: 3 ~ Frekvenca: 50 Hz Poraba toka: 76 A Delovni tlak: pribl. 8 barov Ppedpfexnz Ivex Agxor OPREMA Samodejna menjava orodja Kotna enota

Leto izdelave: 2001, stanje: rabljeno, Pictures coming soon – machine currently undergoing refurbishment Technical Data: - X-axis travel: 7,300 mm - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm Ppodpfst Ea Tfox Agxsr - A-axis swivel angle: 0–90°, freely programmable - C-axis swivel angle: 0–355°, freely programmable - Max. machining length without end-face machining: 7,300 mm - Max. machining length with end-face machining: 6,980 mm - Tool changer with 10 positions and a saw blade holder - 9 material clamps - Tool holder: SK30 - 2-layer machining