Center za strojno obdelavo palic

elumatec SBZ 150

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, elumatec SBZ150 Profile Machining Center 6.0 m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit along the X-axis; Low-wear direct drive; Automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Rigid machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, of which 3 axes are trajectory controlled; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angle of A and C axes freely programmable; With color monitor and floppy disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connectivity; Barcode scanner, Label printer, etc. Hnsdpfx Absw A Rv Ijxon Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer's administrator) Analog modem (customer must provide analog phone line) Technical data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on milling area, see drawing no. 150 05 17 08 Max. machining length for face machining, left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from reference taper dimension Included accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with arbor Angle milling head Important: The profile machining center is equipped as standard with front light barriers. Any required lateral and rear safeguarding must be provided by the customer or please inquire about our safety fence options. Incl. Angle milling head for underside machining

Stanje: rabljeno, Leto izdelave: 2004, 10-vretena naprava. Priključna moč: 380/400V/50Hz, 34 kW. Debelina stekla: 3-60 mm. Hedpjwynzcofx Abxsnn

Leto izdelave: 2003, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1500050182, Elumatec SBZ 150 Profile Machining Centre with 5 Axes for Aluminium Profiles 7.3m Due to a switch in our production to a tube laser system, we are selling our fully functional Elumatec SBZ 150. The last service was performed by Elumatec in March 2026, and the machine has not been used since then. Interested parties are welcome at any time—the machine can gladly be demonstrated and tested here on site. Technical specifications: - X-axis travel: 7,300 mm - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0-90°, fully programmable - C-axis swivel angle: 0-355°, fully programmable - Max. machining length without end-face processing: 7,300 mm - Max. machining length with end-face processing: 6,980 mm - Tool changer with 10 stations, plus a saw blade holder - 8 profile clamps - Tool holding system: HSK63 - Spindle power: 15 kW / 22,000 rpm - Double-layer machining - Minimum quantity lubrication system Hnedpsy Dvq Hjfx Abxsn - Central lubrication - Saw blade: 400 mm The machine is available immediately. Required space: see attached layout. Transport instructions are also included in the attachment; if you have any questions, please contact us at any time. Disassembly, loading, and transport for reassembly purposes should preferably be organised by the buyer. Various tools and aids can be made available by arrangement, as far as possible. All information and dimensions have been provided to the best of our knowledge and belief, but we cannot guarantee their completeness or accuracy! The sale is as inspected, without guarantee, return, or similar. Subject to prior sale.

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 9.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 630 mm, največja hitrost vretena: 24.000 obr/min, številka stroja/vozila: 031809, TECHNICAL DETAILS Travel distance X-axis: 9,500 mm Travel distance Y-axis: 1,000 mm Travel distance Z-axis: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Hodpfx Aeycul Sebxjnn Swivel angle A-axis: ±110°, freely programmable in 1/10° increments Swivel angle C-axis: ±182°, freely programmable in 1/10° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Maximum cutter diameter: 100 mm Maximum disc cutter diameter: 100 mm Maximum saw blade diameter: 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air supply: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with spraying EQUIPMENT Machining processes: milling, drilling, tapping, thread milling, punching and sawing with stationary profile bar 6-sided machining: front optional, possible from below Profile bar protection: processing with stationary profile bar Robust and low-wear direct drives in all axes Axes: 5-axis control for spatial machining Monitor: 15-inch colour display Interfaces: USB connections, network connection 2-layer processing for pendulum operation Associated tools (HSK holders) Two circular saws for aluminium Note: Documentation of the machine’s disassembly is enclosed.

Stanje: rabljeno, Leto izdelave: 2003, x-travel: 760 mm y-travel: 290 mm z-travel: 370 mm Speed: 60 - 4200 rpm Table: 750 x 230 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.13 mm/rev Feed range: 19 - 890 (x) mm/min Spindle taper: SK 30 Column overhang: 171 - 476 mm Total power requirement: 2.4 kVA Machine weight approx.: 0.95 t Space requirement approx.: 2.05 x 1.63 x 2.07 m Hnjdpfx Aot U Rm Ujbxjn The MF1 universal milling machine series impresses with its design and has become indispensable in many repair shops as well as training and production departments. The X-axis is equipped with a continuously variable feed unit, and the swiveling vertical milling head features a wide, stepless speed range for machining steel and non-ferrous metals. Standard equipment includes automatic quill feed, pneumatic tool clamping, and a digital position display. ·Swivel and tilting milling head with quill feed ·Pneumatic tool clamping device ·Continuously variable spindle speed ·Rapid feed in X-axis ·Comprehensive standard accessories

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1500050285, potovalna razdalja osi X: 7.800 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 630 mm, največja hitrost vretena: 24.000 obr/min, število mest v zalogovniku orodij: 14, Oddanie oferty zobowiązuje do terminowego odbioru w dniu 23.12.2025! DANE TECHNICZNE Przesuw w osi X: 7.800 mm Przesuw w osi Y: 1.000 mm Przesuw w osi Z: 630 mm Posuw szybki oś X: 70 m/min Posuw szybki oś Y: 40 m/min Posuw szybki oś Z: 40 m/min Długość obrabianego elementu (max.): 7.300 mm Prędkość obrotowa wrzeciona (max.): 24.000 obr./min Moc silnika wrzeciona: 15.000 W Liczba wrzecion: 1 Liczba miejsc w magazynie narzędzi: 14 Średnica narzędzi: 100 mm Hjdpsxx Uf Njfx Abxjnn DANE MASZYNY Napięcie zasilające: 400 V Rodzaj prądu wejściowego: prąd przemienny (AC) WYPOSAŻENIE Dokumentacja/instrukcja obsługi Magazyn może być wyposażony w dziewięć narzędzi standardowych, pięć narzędzi specjalnych i jedną tarczę piły Dziesięć urządzeń mocujących Dwie oddzielne strefy robocze do pracy wahadłowej Wyświetlacz kolorowy 15" Stacja dyskietek System operacyjny DOS

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel Z: 150 mm - Travel X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW Hedjuha Umspfx Abxenn - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel X/Y: 97/133 mm BACK WORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 6 kW WEIGHT AND DIMENSIONS - Footprint: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1700 kg ACCESSORIES - Control: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Stanje: zelo dobro (rabljeno), SCM Compact XL Four-Sided Planer - Planing width: 23 cm - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindle driven by a single motor: 7.5 kW each, top spindle: 5.5 kW, universal spindle: 5.5 kW Hedpolat Hdjfx Abxenn Machine in very good condition

Leto izdelave: 2001, stanje: dober (rabljeno), 1 rabljena kalilna peč Proizvajalec: Nabertherm, tip N 321 Serijska številka: 160897, Leto izdelave: 2001, Hnedpfx Abjxpf I Noxen Maksimalna temperatura: 1.200°C, Priključna moč: 400V, 47 kW Notranje mere: 750 x 1100 x 400 mm Uporabna prostornina: 320 litrov Teža cca. 1,6 t Dimenzije: Dolžina cca 2 m, širina cca 1,5 m, višina cca 2 m,

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, središčna višina pri ročični gredi: 1.100 mm, teža obdelovanca (maks.): 180.000 kg, dolžina brušenja: 11.000 mm, premer brusilnega koluta: 1.066 mm, skupna dolžina: 11.700 mm, hod vretena: 11.700 mm, teža obdelovanca med konicami: 180.000 g, razdalja med središči: 11.700 mm, POMINI CNC Rullslipmaskin Modell HD-425-2-7L Siemens 840D, 12 axlar. Tillverkningsår: 2006. Två plansystem – sliparens och arbetsstyckets rörelsebanor är separata. Maskinens precision: Rakehet: 0,001–0,002 mm/m Rundhet: 0,001–0,002 mm Excentricitet: 0,002 mm Kronprofil (max kronhöjd): upp till 0,1 mm ±0,002 mm/m Ytfinish utan svängmärken och utan matningsspår efter finslipning. På separat bädd: Automatisk skjutmått, diameter 870–2.250 mm Virvelströmsprovare för sprickor och slag Ultraljudsdjupmätning upp till 180 mm Högtrycks spolning av slipskivan Automatisk eller manuell dynamisk balansering av slipskiva (elektromagnetisk) Diamantutrustad slipskivsformare (slipdressing) 2 hydrostatiska stöd 2 hydrodynamiska stöd 4 mjukstartpositioner för valsar Snabbväxlingsanordning för slipskiva inkl. motor Svängkran Vibrationsmätning och loggning på: Längsbädd vid huvudlagring Nackstöden Bakre upplag Slipspindelhuvud Bakre sliphuvud Vagnens sidosida Arbetsområde: Slipning längd: 11.000 mm Max diameter med 1.066 mm slipskiva: 2.200 mm Hnedpfx Abjwdmy Ssxsn Min diameter med 1.066 mm slipskiva: 800 mm Centrumavstånd: 11.700 mm Maximal valsvikt: 80 ton (utan stöd), 180 ton (med stöd) Minsta avstånd mellan slipskivans centrum och valsaxel: 845 mm Största avstånd mellan slipskivans centrum och valsaxel: 1.635 mm Bäddlängd, axel Z (hydrostatisk): Matning, steglöst 0–6.000 mm/min Oljefilmstjocklek: 0,020 mm Avstånd mellan vaggbäddar: 1.500 mm Bäddbredd: 160 mm Vagnens längd på bädden: 3.385 mm Slipspindelhuvud (axel X), slipskiveprob (axel A), inspektionsaxel A1: Slipspindelns tvärrörelse (kulkruv), axel X: 940 mm Upplösning axel X: 0,0001 mm Slipspindelns längd: 1.695 mm Spindellagers hydrostatisk diameter: 254 mm Manuell finskala, axel X: 0,00001 mm / division Kontinuerlig matning av slipskivan, U-axel: 0–0,35 mm/min Snabbmatning slipskiva, axel X: 0–830 mm/min Slipmotor (AC): 130 kW Slipspindelns varvtal: 400–1.100/1.600 rpm Slipningens yt-hastighet: steglöst Ythastighet slipskivdiameter 1.066 mm: 45 m/s Ythastighet slipskivdiameter 670 mm: 45 m/s Slipskivehål diameter: 508 mm Slipskivetjocklek: 76–152 mm Slipskivediameter: 670–1.066 mm Kroning, U-axel: Maximal krona på diameter: 10 mm Maximal konkavitet på diameter: 10 mm Huvudspindel: Arbetsstyckets varvtal: 5–50 rpm Huvudspindelmotor: 200 kW Max transmiterbart moment: 76,5 kNm Plansystemsdrift: V-remmar Max centrumdiameter, metriskt: 160 mm Pinolslag: 150 mm Huvudspindellängd: 3.110 mm Bakspindel: Pinoldiameter: 260 mm Pinolens slag: 750 mm Max centrumdiameter, metriskt: 160 mm Kon: Metrisk 5 % på diameter Bakspindellängd: 1.300 mm Bakspindelslag: 8.000 mm Skjutmått, arm Axel C, vagn Axel V, rotationsaxel B: Max mätbar diameter: 2.250 mm Min mätbar diameter: 870 mm Maskinens mått: Maskinvikt: 130 ton Längd: 19,5 m Bredd: 5,5 m Höjd: 3,2 m Fundamentdjup: 3,8 m