5-osni CNC obdelovalni center za palice

ELUMATEC SBZ150

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, elumatec SBZ150 Profile Machining Center 6.0 m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit along the X-axis; Low-wear direct drive; Automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Rigid machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, of which 3 axes are trajectory controlled; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angle of A and C axes freely programmable; With color monitor and floppy disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connectivity; Barcode scanner, Label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer's administrator) Analog modem (customer must provide analog phone line) Technical data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on milling area, see drawing no. 150 05 17 08 Max. machining length for face machining, left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Klodpfx Aasw A Rv Iemew Milling spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from reference taper dimension Included accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with arbor Angle milling head Important: The profile machining center is equipped as standard with front light barriers. Any required lateral and rear safeguarding must be provided by the customer or please inquire about our safety fence options. Incl. Angle milling head for underside machining

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 100 h, največja hitrost vretena: 5.000 obr/min, skupna višina: 1.800 mm, skupna masa: 2.200 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 31t- Model B, število osi: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014 and features a robust FANUC 31i B control and a twin-spindle configuration with C and Y axes for complex machining operations. It is equipped with a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. This machine is ideal for precision turning and milling applications, offering a comprehensive solution for modern metalworking. Contact us for more information about this machine. Additional Equipment • Automatic bar loading magazine with adjustable part length and bar diameter • Remnant extraction system • Guide channel made of polyurethane plastic • Longitudinal movement shifting system Machine Advantages Qualitative Machine Advantages • No spindle reduction required Technical Machine Advantages • Cooling: Thermocompensation system • Axes: C-axis and Y-axis • System: Linear guide system, digital drive system • PART CATCHER Pneumatically operated part catcher for gentle unloading of finished components. Parts are transferred to a collecting box (standard) or onto a conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm • Tool system: 12-position VDI30 radial turret • Live tooling: up to 12 driven tools • Subspindle speed range: 0-7000 rpm • Bar length capacity: 1200 - 3200 mm • Through-bore diameter: 20 - 65 mm • Feed speed: 0 - 627 mm/sec • Turning length: 650 mm Additional Information Control unit: Integrated PLC Features: Fully automatic work cycle, monitoring and error diagnosis (display output) Tools Max. power: 6.7 kW Max. torque: 25 Nm Speed range: 0-5000 rpm C-axis: Available Media Power supply: 200/220/400 V AC Air requirement: Min. 7 bar Air consumption: 45 L/min Installation position (mounting) The assembly kit includes vibration-damping, height-adjustable leveling feet and mounting brackets. Machine history Note: As-new condition, only 100 operating hours Dimensions Ksdpsx D H Sfofx Aamelw Machine depth 4500 mm

Leto izdelave: 2003, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1500050182, Elumatec SBZ 150 Profile Machining Centre with 5 Axes for Aluminium Profiles 7.3m Due to a switch in our production to a tube laser system, we are selling our fully functional Elumatec SBZ 150. The last service was performed by Elumatec in March 2026, and the machine has not been used since then. Interested parties are welcome at any time—the machine can gladly be demonstrated and tested here on site. Technical specifications: - X-axis travel: 7,300 mm - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0-90°, fully programmable Kljdpfx Aajy Dvq Hjmjw - C-axis swivel angle: 0-355°, fully programmable - Max. machining length without end-face processing: 7,300 mm - Max. machining length with end-face processing: 6,980 mm - Tool changer with 10 stations, plus a saw blade holder - 8 profile clamps - Tool holding system: HSK63 - Spindle power: 15 kW / 22,000 rpm - Double-layer machining - Minimum quantity lubrication system - Central lubrication - Saw blade: 400 mm The machine is available immediately. Required space: see attached layout. Transport instructions are also included in the attachment; if you have any questions, please contact us at any time. Disassembly, loading, and transport for reassembly purposes should preferably be organised by the buyer. Various tools and aids can be made available by arrangement, as far as possible. All information and dimensions have been provided to the best of our knowledge and belief, but we cannot guarantee their completeness or accuracy! The sale is as inspected, without guarantee, return, or similar. Subject to prior sale.

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 9.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 630 mm, največja hitrost vretena: 24.000 obr/min, številka stroja/vozila: 031809, TECHNICAL DETAILS Travel distance X-axis: 9,500 mm Travel distance Y-axis: 1,000 mm Klsdjycul Sopfx Aamow Travel distance Z-axis: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 1/10° increments Swivel angle C-axis: ±182°, freely programmable in 1/10° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Maximum cutter diameter: 100 mm Maximum disc cutter diameter: 100 mm Maximum saw blade diameter: 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air supply: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with spraying EQUIPMENT Machining processes: milling, drilling, tapping, thread milling, punching and sawing with stationary profile bar 6-sided machining: front optional, possible from below Profile bar protection: processing with stationary profile bar Robust and low-wear direct drives in all axes Axes: 5-axis control for spatial machining Monitor: 15-inch colour display Interfaces: USB connections, network connection 2-layer processing for pendulum operation Associated tools (HSK holders) Two circular saws for aluminium Note: Documentation of the machine’s disassembly is enclosed.

Stanje: dober (rabljeno), Leto izdelave: 2007, Stroj je v zelo dobrem stanju. Postaja za nalaganje in razlaganje PROMOT ni vključena v obseg dobave. Na voljo je različno orodje/pribor za stroj. Tehnične podatke o stroju si lahko ogledate na zadnjih dveh slikah. Kledexf Iamjpfx Aamjw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1500050285, potovalna razdalja osi X: 7.800 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 630 mm, največja hitrost vretena: 24.000 obr/min, število mest v zalogovniku orodij: 14, Oddanie oferty zobowiązuje do terminowego odbioru w dniu 23.12.2025! DANE TECHNICZNE Przesuw w osi X: 7.800 mm Przesuw w osi Y: 1.000 mm Przesuw w osi Z: 630 mm Klodpfx Asxx Uf Nsamjw Posuw szybki oś X: 70 m/min Posuw szybki oś Y: 40 m/min Posuw szybki oś Z: 40 m/min Długość obrabianego elementu (max.): 7.300 mm Prędkość obrotowa wrzeciona (max.): 24.000 obr./min Moc silnika wrzeciona: 15.000 W Liczba wrzecion: 1 Liczba miejsc w magazynie narzędzi: 14 Średnica narzędzi: 100 mm DANE MASZYNY Napięcie zasilające: 400 V Rodzaj prądu wejściowego: prąd przemienny (AC) WYPOSAŻENIE Dokumentacja/instrukcja obsługi Magazyn może być wyposażony w dziewięć narzędzi standardowych, pięć narzędzi specjalnych i jedną tarczę piły Dziesięć urządzeń mocujących Dwie oddzielne strefy robocze do pracy wahadłowej Wyświetlacz kolorowy 15" Stacja dyskietek System operacyjny DOS

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Klsdpfx Aaeucfwpsmsw

Stanje: rabljeno, Leto izdelave: 2001, Technical details: X-travel: 2500 mm Y-travel: 1000 mm Z-travel: 750 mm Table size: 3220 x 1000 mm Kodpfx Aovptmweamjlw Workpiece weight approx.: 3000 kg Spindle taper ISO: 50 Spindle speed range: 20 - 5000 rpm Feed rate: 1-30000 mm/min Rapid traverse: 30 m/min Total connected load: 40 kW Required space approx.: 6.9 x 4.1 x 3.7 m Machine weight approx.: 21 t Equipped with: - CNC control HEIDENHAIN TNC 426 - 30-position automatic tool changer - RENISHAW probe - Coolant system with through-spindle coolant (IKZ) and chip conveyor - Various tool holders *

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Ksdsu Hl R Topfx Aamolw Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Stanje: rabljeno, Leto izdelave: 2001, Drehdurchmesser 340 mm Drehlänge 750 mm Steuerung SYSTEM TX 8H Spindeldurchlass 80 mm Umlaufdurchmesser über Planschlitten 530 mm Umlaufdurchmesser über Bett 665 mm Drehzahlbereich - Hauptspindel 3.150 min/-1 Antriebsleistung - Hauptspindel 22 kW Anzahl der Werkzeugplätze 12 Pos. Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Kjdpfx Aoxwdw Ejamolw Es sind 2 Maschinen verfügbar. Preis pro Stück. Maschine 1: - Bilder 1-5 - Betriebsstunden ca.55.790 h Maschine 2: - Bilder 6-10 - Betriebsstunden ca.54.347 h Technische Merkmale & Zubehör: - Y Achse - Zubehörpaket mit starren und angetriebenen Werkzeughaltern -Späneförderer Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!