Elumatec SBZ 122/73, vklj. eluCad

elumatec AG SBZ 122/73

Machine Information:

The machine comes from a metalworking company specializing in the production of aluminium windows, doors, and façades. It was purchased in 2018 to relieve several 5-axis machines, specifically for aluminium entrance door manufacturing. Due to internal restructuring, the machine was no longer used and became available.

The machine has been carefully cleaned, inspected, and serviced on the premises of Weyand. All worn components have been replaced.

Programming can be done either directly at the machine (eluCam) or via the included office software eluCad. The software option package for data import of ECW, NCW, and V6 files (e.g., LogiKal or Wictop) is also included.

Machine Description:

- Efficient machining of aluminium, plastic, and steel profiles
- A-axis infinitely adjustable from -120° to +120°
- Linear guides for clamp shifting
- Enhanced machining results through intelligent control technology
- Rapid positioning of the machining unit (up to 120 m/min) via dynamic servo drives
- Thread cutting without floating tap holder
- Automatic clamp recognition and positioning
- Automatic tool changer
- 4-axis control
- No referencing run required for main axes thanks to absolute encoder systems
- Collision avoidance via automatic clamp detection and positioning
- Power torque milling motor with closed-loop speed control for short spindle acceleration and braking times
- Certified, drive-integrated safety functions

Low power consumption due to intelligent control technology. Energy recovery through common DC-link coupling of axis drives with feedback and buffering of braking energy.

Green-Line cooling unit for control cabinet with reduced energy consumption

- Windows operating system
- 15" flat panel display, USB ports and network connection
- Simple and user-friendly programming via eluCam at the operator terminal, even during machining operations
- Remote maintenance via TCP/IP with available internet connection

Equipment:
- Operator safety enclosure
- Four horizontal pneumatic clamping systems
- Material stop left
- Minimal quantity lubrication system
- Handheld control device
- Depth gauge

Technical Data:
- Max. machining length without end-face operations: 4,050 mm
- X-axis travel: 4,176 mm, Vmax 120 m/min
- Y-axis travel: 1,040 mm, Vmax 60 m/min
- Z-axis travel: 540 mm, Vmax 30 m/min
- Machining directions 3+2 (top, rear, front)
- Positioning accuracy: +/- 0.1 mm
Codpfxjyr H Abj Ahxorb
- Milling spindle speed: max. 20,000 rpm
- Milling spindle power: 7 kW, S1 (water-cooled)
- Tool interface: HSK-F63
- Automatic tool change
- Twelve tool positions in the automatic magazine
- Max. disc milling cutter diameter: 120 mm
- Max. tool length (from taper): 150 mm
- Automatic clamp shifting
- Basic clamp (with round guide)
- Software: eluCam

- Compressed air connection: >7 bar
- Electrical connection: 400 V, 50 Hz, 22 A
- Air consumption per minute (with spraying): approx. 185 l

Accessories included (used):
- Full enclosure SBZ122/7x (rear wall + roof)
- Complete HSK-F63 d16 L=155 holder for disc milling cutter
- Disc milling cutter D=92x6.0 mm, Z=14, d=16, carbide teeth
- Right stop SBZ 122170171173 with second clamping circuit, for machining oversized parts
- Various used tool holders and milling cutters
- ESTA chip extraction system

eluCad
- License for connection to eluCad
- eluCad data import package for ECW, NCW and V6 files

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.