Buffalo Machinery Micromill Challenger Mm-430 nakup rabljenega (107.984)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany Nodpfsmhhyaex Am Hsda - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard Nodpfxsmhh Ano Am Hsda - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Ndjdpfxeh Ek Daj Am Hsa Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included Nedpfx Aomhhf Ssm Hsda - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Nedpfx Amsmhhl Hj Hoda Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. Nsdpomidyfofx Am Hsda The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts Nedpfxomkixwj Am Hoda - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Nedjmhh Dtjpfx Am Heda Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: zelo dobro (rabljeno), Profesionalni zunanji mikrometer, namenjen za natančne meritve premerov, debelin in dimenzij mehanskih delov. Set vključuje zamenljive merilne nastavke in nastavitvene vzorce, ki omogočajo delo v širokem merilnem območju. Tehnični podatki: • Proizvajalec: HOLEX • Merilno območje: 100–200 mm • Natančnost odčitavanja: 0,01 mm • Zamenljive merilne nastavke • Kalibracijski vzorci vključeni • Lesena transportna škatla Stanje: Rabljeno, v zelo dobrem vizualnem stanju. Komplet je popoln, kot kažejo slike. Mehanizem deluje gladko. Običajni znaki uporabe zaradi skladiščenja in delovanja. Komplet vsebuje: • mikrometer 100–200 mm, • zamenljive merilne nastavke, Ndedpfxjzaf Ule Am Hja • nastavitvene vzorce, • nastavitveni ključ, • leseno etui.

Stanje: kot nova (razstavni stroj), dolžina podajanja os X: 800 mm, širina skobljanja: 800 mm, Dvostranski skobelni stroj. Zelo dobro delujoče stanje. Njdpfx Amsx Rryks Hoda

Stanje: dober (rabljeno), skupna dolžina: 1.000 mm, skupna širina: 600 mm, skupna višina: 2.500 mm, nosilnost na odsek shranjevanja: 150 kg, TEHNIČNI PODATKI • Proizvajalec: META • Višina okvirja: 2.500 mm • Širina podstavka: 1.000 mm • Globina okvirja: 600 mm • Nosilnost enega podstavka: 150 kg • Število podstavkov na modul: 6 kosov • Površina: pocinkana • Montaža s vstavljanjem • Stanje: rabljeno Velike količine so na voljo takoj. Cene glede na količino, neto cena na kos, brez DDV: Osnovni modul: 1 – 5 modulov: 54,00 € 6 – 20 modulov: 52,38 € 21 – 50 modulov: 50,76 € 51 modulov in več: 49,14 € Dodatni moduli: 1 – 10 modulov: 39,00 € 11 – 25 modulov: 37,83 € 26 – 75 modulov: 36,73 € 76 modulov in več: 35,69 € Dobava iz skladišča Nordhorn. VAŠI KONTAKTNI PARTNERJI PRI NAS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT IN MONTAŽA Z veseljem vam pomagamo pri transportu in montaži izdelka. Izdelek je na voljo za osebni prevzem. Dostava je možna proti doplačilu. Dodatni stroški so odvisni od kraja dostave in obsega pošiljke, podrobnosti pa lahko povprašate pri nas. PLAČILNI POGOJI Plačilni pogoji se določijo ob naročilu. Cena je navedena kot cena na kos/neto cena, kot je navedeno v opisu izdelka (brez DDV). Seveda boste prejeli račun z navedeno ceno DDV. O NAS Ndsdpfx Amjuk E Thj Hoa Podjetje DLK v Nordhornu se ukvarja s prodajo novih in rabljenih izdelkov iz področja skladiščne logistike, transportnih sistemov, skladiščnih regalov, skladišč za tekstil ter strojev za trgovino, industrijo in obrt. Nenehno vam ponujamo zanimive ponudbe za rabljene izdelke različnih proizvajalcev/blagovnih znamk po ugodnih pogojih. Če imate kakršna koli vprašanja, nas kontaktirajte. Štiri zmage – gradniki uspeha podjetja DLK – skladiščna tehnika | Levelmaker® | logistika | rešitve

Stanje: rabljeno, skupna dolžina: 1.220 mm, skupna širina: 400 mm, skupna višina: 2.000 mm, nosilnost na odsek shranjevanja: 150 kg, Ponujamo rabljene industrijske regalne sisteme. TEHNIČNI PODATKI Proizvajalec: Nedocn Tip: Shelf N Višina okvirja: 2.000 mm (nova roba) Polica: 1.220 x 400 mm (rablena roba) Nosilnost police: 150 kg Število nivojev: 5 kosov Sistem vtične montaže Diagonalni nosilec Cenik (neto cena za kos, brez DDV): Osnovni moduli: 1 – 5 modulov: 41,50 € neto za kos 6 – 20 modulov: 39,43 € neto za kos 21 – 50 modulov: 37,35 € neto za kos od 51 modulov naprej: 35,28 € neto za kos Dodatni moduli: 1 – 5 modulov: 29,50 € neto za kos 6 – 20 modulov: 28,03 € neto za kos 21 – 50 modulov: 26,55 € neto za kos od 51 modulov naprej: 25,08 € neto za kos NAČRTOVANJE Naša prodajna ekipa vam z veseljem pripravi brezplačno ponudbo, prilagojeno vašim željam. PREVOZ IN MONTAŽA Z veseljem vam pomagamo pri prevozu in montaži izdelka. PLAČILNI POGOJI Plačilni pogoji se dogovorijo v primeru oddaje naročila. Cena je izražena kot cena za kos/neto cena oziroma kot je navedeno v opisu izdelka (brez DDV). Seveda boste prejeli račun z navedeno ceno DDV. O NAS Podjetje DLK iz Nordhorna trguje z novimi in rabljenimi izdelki na področju skladiščne logistike, transportne tehnike, skladiščnih podestov, skladiščenja tekstila ter stroji za trgovino, industrijo in obrt. Nenehno vam ponujamo zanimive ponudbe rabljenih izdelkov različnih proizvajalcev/blagovnih znamk po ugodnih pogojih. Če imate vprašanja, nas kontaktirajte. Nsdpfey Dggljx Am Hjda Štirje dobijo – Gradniki uspeha podjetja DLK – skladiščna tehnika | Levelmaker® | logistika | rešitve

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 65 mm, skupna masa: 9.000 kg, vpenjalna sila: 785 kN, skupna širina: 1.800 mm, skupna dolžina: 4.500 mm, skupna višina: 3.000 mm, moč: 0,045 kW (0,06 KM), Oferujemy na sprzedaż lekko używaną wtryskarko-rozdmuchiwarkę w doskonałym stanie. Maszyna jest podłączona i w pełni sprawna, możliwość prezentacji podczas pracy. Nodpfx Amjthk Rzs Hsda Możemy również zaoferować kilka gotowych form do produkcji kanistrów oraz kloszy lamp. Maszyna przystosowana jest do pracy z tworzywami typu PMMA, PC, PP oraz PE.

Leto izdelave: 2007, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: L110-NC6-NC5-k8-12-S80-104, Keystone Automatic Pointer machine na prodaju Na prodaju je Keystone Automatic Pointer machine u korištenom, ispravnom stanju. Stroj je namijenjen za automatsku obradu/šiljenje drvenih letvi kvadratnog presjeka i predstavlja robusnu industrijsku mašinu za kontinuiranu upotrebu. Keystone strojevi su poznati po čvrstoj izradi, pouzdanom radu i jednostavnom rukovanju. Podaci o stroju: Nodpfoy Epldox Am Hoda * Proizvođač: Keystone * Model: Automatic Pointer * Stanje: rabljeno * Radno stanje: ispravno * Područje primjene: automatska obrada šiljenja * Izvedba: prepravljena na 380 V i opremljena hidrauličkom jedinicom i transportnom trakom za odvod otpadnog materijala Stroj je moguće pregledati po dogovoru. Dodatne informacije, tehničke podatke, fotografije ili videozapis rada šaljemo na zahtjev. Lokacija: Baranja, Mađarska Pravo na greške i međuprodaju pridržano.

Stanje: pripravljen za uporabo (rabljen), Gebruikte blikproductielijn voor de productie van blikken van 73 mm of 99 mm. Verschillende samenstellingen van machines beschikbaar. Bestaat uit: - Krupp Sdvt duplexslitter - Soudronic FBB400 lasmachine - Soudronic poedercoatsysteem voor de binnenzijde - Buitenlakinstallatie Nedsvy Tyxspfx Am Hoda - Frei uithardingsoven - Metalbox 65d spin-flanger - FMI A304 kraalwals - FMC 652 sluitmachine

Stanje: pripravljen za uporabo (rabljen), Gebruikte blikproductielijn voor de productie van 153 mm melkpoederblikken. Optioneel kan een offerte worden gemaakt voor andere blikformaten, of de lijn kan worden ingesteld op 153 mm voedselblikken. - Krupp Sdvt duplex slitter - Soudronic SBW150 lasser - Frei buitenlakmachine - Precision Tools gasuithardingsoven - Blema KEBS 160 randbuigmachine (flanger) Nedpfx Amjvy Txzj Heda - Klinghammer SIA 180 ribbelmachine (beader) - Angelus 50p sluitmachine (seamer)

Stanje: novo, Naprodaj robustna, natančna industrijska sklopka priznane japonske znamke C-max / Fuji Seiko Co., Ltd. Model: 51288015900 Nedpfx Amow Rdvis Heda Datum izdelave: 17.01.2006 Sklopka je namenjena uporabi v CNC strojih, pogonskih sistemih, industrijski avtomatizaciji, vretenih in rotacijskih oseh. Opremljena s štiritočkovno pritrdilno prirobnico in puščno pritrdilno enoto z nastavitvenimi kroglicami. ⸻ Tehnični podatki: • Zunanji premer: 81,03 mm • Premer prirobnice (razmak vijakov): 63,04 mm • Skupna dolžina: 52,96 mm • Notranji premer puše: 31,46 mm • Element z utorom za pritrditev: 50,75 mm ⸻ Izdelava iz visokokakovostnega jekla, skladiščeno kot zaloga – zelo dobro ohranjeno, minimalni sledovi skladiščenja. Originalna embalaža proizvajalca z japonsko nalepko. /////Cena za 1 kos./////

Stanje: zelo dobro (rabljeno), Profesionalna rezkalna glava priznane znamke Sandvik Coromant. Delovni premer: Ø80 mm – idealna za grobo in fino obdelavo jekla, nerjavečega jekla in litega železa. Vpenjanje: SK40 / ISO40. Model: 346.220242R25. Konstrukcija z izmenljivimi rezalnimi ploščicami – trenutno nameščene ploščice so v dobrem stanju. Visoka natančnost, togost in vzdržljivost – industrijska glava za CNC centre in rezkalke. Originalni izdelek Sandvik – vodilnega proizvajalca rezalnih orodij. Stanje: rabljena, v zelo dobrem tehničnem stanju – pripravljena za takojšnjo uporabo. ✅ Idealna za planiranje, čelno rezkanje in obdelavo večjih površin ✅ Visoka učinkovitost in dolga življenjska doba zahvaljujoč kakovostnim ploščicam ✅ Orodje premium razreda – nemška in švedska kakovost. Nedpfx Aoxld Awsm Hoda

Stanje: zelo dobro (rabljeno), Profesionalni vrtalni držalo priznane blagovne znamke GEWEFA – nemška kakovost in natančnost izdelave. Namenjeno za vpenjanje svedrov in obdelovalnih orodij v CNC rezkalnih strojih, obdelovalnih centrih ter klasičnih strojih s pritrditvijo SK40 DIN 69871. 📌 Tehnične specifikacije: . Proizvajalec: GEWEFA – Made in Germany . Tip: SK40 × Ø1–16 mm . Kataloška številka: 28.05.046.001 / 28.05.046.002 . Stožec: SK40 DIN 69871 AD/B Nedpexizbfjfx Am Hoda . Objemni razpon: Ø1 – 13 mm . Leto proizvodnje: 2007 . Stanje: rabljeno, zelo dobro – popolnoma tehnično brezhibno ✅ Prednosti: . Natančna izdelava – visoka koncentracija in stabilnost orodja . Originalni izdelek iz Nemčije – ne kitajska kopija . Idealno za serijsko proizvodnjo in precizno obdelavo . Pripravljen za takojšnjo uporabo Cena navedena za 1 kos.

Stanje: zelo dobro (rabljeno), Izdelan iz težke litine – visoka togost in vzdržljivost. Delovna odprtina cca 120 mm (izmerjeno z merilnim instrumentom). Nastavljivi čepi z vrtljivimi konicami. Pribitje skozi odprtine v osnovi – zanesljiva in stabilna pritrditev. Zelo dobro stanje, popolnoma funkcionalen in pripravljen za uporabo. Odlično se obnese kot podpora pri obdelavi gredi, cevi, palic in drugih elementov, ki med struženjem potrebujejo oporo. Ndsdpjw Sfptefx Am Hoa

Stanje: zelo dobro (rabljeno), Prodajam robustno montažno ploščo/strojno mizo z T-utorji. Izdelana iz debelostenske jeklene konstrukcije, pobarvana modro. Odlična osnova za montažo večjih elementov, priprave ali za merilne in obdelovalne namene. • Dimenzije: 2570 x 770 x 200 mm • Površina z T-utorji • Natančno obdelan zgornji del • Masa: 900 kg Njdpfx Aow Rdtuem Heda • Možnost transporta ali nakladanja z viličarjem

Stanje: zelo dobro (rabljeno), Naprodaj profesionalne akumulatorske škarje Klauke EBS6LGKS, namenjene za hitro in natančno rezanje kovinskih kabelskih polic, žice ter vijakov do Ø 6 mm, v celoti delujoče, pripravljene na uporabo. Komplet vključuje: • Akumulatorske škarje Klauke EBS6LGKS • Akumulator • Polnilec Klauke • Originalen transportni kovček Stanje: • Rabljeno, 100% delujoče • Rezalni mehanizem deluje gladko • Akumulator dobro drži Ndjdpfjxyum Nox Am Hja • Komplet je popoln. Specifikacija: • Maksimalni premer reza: 6 mm • Pogon: akumulatorski • Premium znamka: Klauke – Nemčija • Hitro in čisto rezanje brez napora • Idealno za inštalaterje, električarje, avtomatizacijo, proizvodnjo

Stanje: zelo dobro (rabljeno), Na prodajo natančen urični mikrometer ORION z merilnim območjem 0–25 mm in natančnostjo 0,001 mm. Nameščen je na stabilnem litoželeznem stojalu za stacionarno uporabo – idealen set za kontrolo dimenzij v proizvodnji, orodjarni, delavnici ali merilnem laboratoriju. Tehnični podatki mikrometra: • Območje: 0–25 mm • Natančnost: 0,001 mm • Odcitavanje na uri - hitro in enoznačno branje Ndodpfjw Rdgnex Am Hja • Precizna izdelava – robustna glava, stabilna mikrometrska skala • Znamka: ORION (ugleden proizvajalec merilnih instrumentov) Merilno stojalo: • Stabilno litoželezno podnožje • Dvotočkovna nastavitev • Omogoča ponovljive meritve brez držanja orodja v roki Komplet je pripravljen za delo Zelo dobro ohranjen – vzdrževan, brezhiben, meritve so tekoče in natančne.

Stanje: rabljeno, Profesionalna merilna plošča iz granita – priznana kakovost Mitutoyo / Planolith (izdelano v Nemčiji). Idealna za uporabo pri kontroli kakovosti, v orodjarni in metrologiji. ⸻ Parametri: • Dimenzije plošče: pribl. 1200 x 800 mm • Debelina: pribl. 170 mm • Teža: pribl. 460 kg • Razred natančnosti: DIN 876/0 (visoka natančnost) • Dovoljeno odstopanje: 0,009 mm • Dejansko odstopanje: 0,00273 mm • Proizvajalec: Planolith GmbH / Mitutoyo • Država izdelave: Nemčija Ndedpfxoyw Ubqj Am Hoa • V kompletu: masivno jekleno stojalo ⸻ Prednosti: Zelo visoka merilna natančnost Stabilna konstrukcija – težek granit duši vibracije Idealna za meritve, risanje, kontrolo detajlov Profesionalna oprema Pripravljena za uporabo ⸻ Stanje: Rabljeno – z običajnimi sledovi uporabe (vidne praske na površini), vendar popolnoma funkcionalna in ohranja vse uporabne lastnosti.

Stanje: zelo dobro (rabljeno), Profesionalni digitalni mikrometer priznane znamke Mahr – model Micromar 40 EWR(i) – namenjen izjemno natančnim meritvam z nat natančnostjo do 0,001 mm. Naprava v izvedbi IP65, odporna na prah in vodo, idealna za uporabo v metrologiji, kontroli kakovosti in industrijskih delavnicah. . Merilno območje: 100 – 125 mm . Natančnost: 0,001 mm . Digitalni prikaz z velikim, preglednim LCD zaslonom . Zaščitna stopnja: IP65 – odpornost na prah in škropljenje . Funkciji „ABS“ in „Hold“ – hitro zaustavljanje merjenja in funkcija ničljenja . Visoka togost ohišja, ergonomski oprijem . V kompletu originalna škatla, certifikat, navodila za uporabo ter 100 mm merilni vzorec . Stanje: praktično novo / uporabljeno samo za testiranje Nedpfx Amsxl Rgie Hjda