Biesse 03314K00 nakup rabljenega (348)

Stanje: zelo dobro (rabljeno), Dvosmerni stroj, ki se lahko postavi v linijo za pretočnim večvrtalnim strojem za avtomatski proces vrtanja in vstavljanja moznikov. - Elektronski programator "CNI" NC 400 - Vgrajena komandna in elektro omarica - Največja razdalja med vodoravnimi glavami pribl. 3200 mm - Premična in nastavljiva desna stran stroja (glede na širino plošč) - 2 motorizirana transportna trakova (0,25 KM x 2 motorja) - 1+1 rezervoarja za moznike za samodejno podajanje do šob - 6+6 vodoravnih vstavljalnih šob (injektorji za lepilo in pogoni za moznike) - Visokotlačni sistem za dovajanje lepila - Skupna instalirana moč cca 5 kW. Gedpfx Aow Ug A Hjb Ijiu

Stanje: zelo dobro (rabljeno), CNC-controlled flexible automatic through-feed boring line for milling, drilling, and dowel insertion Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Powered roller conveyor "RBO" with 90° workpiece rotation unit B) Portal CNC-controlled through-feed boring machine "BIESSE" FTT 800 (for milling and drilling) Zone A: 2 electrospindles ISO 30 (each 4.5 kW) with tool magazine with 3 slots each. Zone B: 2 preparations for the installation of 2 additional electrospindles 4 top drilling units (total 128 vertical spindles + 16 horizontal spindles on the Y-axis) 2 tool magazines (turret) with 60 slots each for spindles (2 x 60 = total 120) C) Transfer connection with turner (180° overturn, top side down) "RBO" Ribaltatore D) Portal CNC-controlled through-feed boring machine "BIESSE" FTT 800 R8 (for milling and drilling) 2 horizontal drilling units (1 right + 1 left) with 4 heads each with 18 spindles (36R+36L), total 72 Zone A: 2 electrospindles ISO 30 (each 4.5 kW) with tool holder magazine, 3 slots each. Zone B: 2 preparations for the installation of 2 additional electrospindles 4 top drilling units (total 128 vertical spindles + 16 horizontal spindles on the Y-axis) 2 tool magazines (turret) with 60 slots each for spindles (2 x 60 = total 120) E) "BIESSE" RD dowel insertion unit Gsdpfxjyhqa As Ab Ioiu 2 horizontal boring units (1 right + 1 left) each with 5 insertion nozzles (5LH + 5RH), total 10 nozzles F) Dust extraction and cleaning machine "WANDRES"

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Giedpfx Aoukhd Aob Iou Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal Gijdpfx Abet Ig A Ss Ieu CNC control NC 500 (Software Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal The second drilling machine is connected to the CNC of the first machine.

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles for each horizontal drilling unit (Qty.): 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip removal belt Digital readout of positioning data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports Giedpfxjidqd To Ab Isu The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 throughfeed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops Gisdpfx Asidqf Rjb Iou The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 kW and each with 22 drilling spindles) Gsdjvnq Txopfx Ab Ioiu - 5 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screws for chip extraction NC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 8 horizontal supports – glue application and dowel insertion tools) - 3 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screws for chip extraction

Stanje: zelo dobro (rabljeno), Electronic machine, CNC-controlled, PC control type NC 500 – Tooling System software No. 2 pass-through motorized conveyor belts – feed speed (m/min) approx. 35 - 75 No. 2 horizontal drilling units Drilling spindles per horizontal drilling unit (Qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling units Drilling spindles per lower vertical drilling unit (Qty) 2 x 1.8 HP No. 3 upper vertical drilling units Spindles per upper drilling unit (Qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 endless screws for chip removal CNC controls the movement (X-axis) of the horizontal drilling units CNC controls the movement (Hv) of the 2 horizontal drilling units CNC controls the movement (X-axis) of the vertical drilling units CNC controls the movement (axis Y1 and Y2) of the drilling spindles CNC controls the movement (axis Y) of the stops Gisdpfx Ajhvi Dusb Iou CNC controls the movement (axis X) of the workpiece clamps CNC controls the movement (axis X) of the conveyor belts The CNC control manages all programming of automatic work cycles

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Giedpfx Abeu Rc Ano Iou Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / Software SINITRA Feed Speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW), pneumatic 2 x hogging units DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): 1st Gluing Unit (hot-melt adhesive + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing Unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min. 0 – 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (1 x 2 kW) 0 – 25° Multipurpose unit (radius and profile milling unit) AR 80 (0.65 kW x 2) 25 m/min ROTAX. 8+8 position turret (max. 25 m/min) Motors with automatic tool change (tools) Multi-profile scraper unit (CNC controlled) RB 40 (multi-profile) Flat scraper unit RC 20 + spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided – First machine in a production line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 100 / 1200 Control: PC-based, Windows / PC software / SINTRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER CNC) EDGING PROCESSING (for each side): Spray unit (for liquid non-stick agent) No. 2 hoggers DT 10 (5.8 kW x 2) Free space EDGEBANDING UNIT (for each side): 1st gluing station (hot melt + pre-melter) SP 30 (high melt + Edge Control EC 40) 2nd gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled) + edge magazine for rolls (no. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (2 x 1 kW) 0°–25° No. 1 universal routing unit for grooving/rebating/profiling EB 60 (1 x 5 kW) – ISO 30 motor Giedpfx Abeu Rc Hye Isu Multi-profile scraper unit (CNC-controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Stanje: zelo dobro (rabljeno), PC control unit type NC 400 (with software for managing work cycles) No. 2 continuous motorized conveyor belts Max. working width (mm): 3200 – Min. working width (mm): 205 (approx.) No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty): 11 No. 4 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 2 upper vertical drilling supports Gedpsi D D Tfofx Ab Ieiu No. 2 spindles per drilling unit on upper drilling support No. 2 upper vertical workpiece clamps No. 2 screws (continuous) for chip removal Digital display for position data (axes) Total connected load (kW): 25 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. The CNC control system manages the movement (Y-axis) of the stops. OPTION: front loader (for narrow parts: min. 60 mm – max. 260 mm)

Stanje: zelo dobro (rabljeno), Flexible N.C.-Automatiklinie zum Bohren, Fräsen und Einsetzen (Beschläge). Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Stachelmagazin (Puffer) für 18 Positionen KZ2047) Übergabestation mit motorisiertem Förderband Godpfx Absidmkrj Ijiu KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabestation mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 KZ2051) Übergabestation mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 KZ2053) Übergabestation mit motorisiertem Teppichförderer, 90°-Umlenkung auf Rollentisch KZ2054) Rollenbahn ebenfalls mit motorisierten Bändern (zum Wenden der Platten um 180° zur Weitergabe an die Montagelinien)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 90 mm, širina obdelovanca (maks.): 3.200 mm, dolžina obdelovanca (maks.): 3.200 mm, največja debelina roba: 3 mm, The machine has the following configuration: Number of panel sizing/milling units left side: 5 Milling unit (AS10) Double fine millers, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (coarse) Fine trimming for bevel and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 90 mm Panel length max.: 3,200 mm Panel width max.: 3,200 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm EQUIPMENT Conveyor chain with pushers Pressure with rubber belt Panel guiding rails, positioned by NC Edge roll magazine with 6 positions Hot-melt unit for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on overhead cabinets Godeyq Avhopfx Ab Ieiu The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and utilization of the machine at the destination. External reference: 7685

Stanje: zelo dobro (rabljeno), Spalt- und Nutmaschine (gebraucht zum Nuten und/oder zum Teilen eines einzelnen Paneels in zwei Teile) Giedpsyx S N Ujfx Ab Ieu - Minimale Werkstücklänge: ca. 250 mm - Maximale Werkstücklänge: ca. 2.700 mm - Minimale Werkstückbreite: ca. 124 mm - Maximale Werkstückbreite: ca. 1.200 mm - Werkstückdicke (min./max.): ca. 10 / 60 mm - Max. Vorschubgeschwindigkeit: ca. 50 m/min - Installierte Gesamtleistung: 82 kW Mit folgenden Aggregaten: POS. 1 Untere Ritzaggregateinheit (Rotax Elektromotor 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 2 Obere Ritzaggregateinheit (Rotax Elektromotor 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 3 Untere Ritzaggregateinheit (Rotax Elektromotor 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 4 Obere Ritzaggregateinheit (Rotax Elektromotor 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 5 Untere Hauptsägeeinheit (Rotax Elektromotor 11 kW), max. Sägeblattdurchmesser ca. 450 mm POS. 6 Obere Hauptsägeeinheit (Rotax Elektromotor 11 kW), max. Sägeblattdurchmesser ca. 450 mm OPTIONAL: Schalldämm- und Schutzeinhausung (Kabine)

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, TEHNIČNI PODATKI Komponente ADVANTAGE C prečni podajalnik: avtomatski ROTACIJSKA NAPRAVA (flipar): na voljo BIESSE FTT: s 4 glavami, vrtanje in rezkanje, avtomatska menjava orodij BIESSE FHT: 2 DELOVNI ENOTI za vodoravno vrtanje in vstavljanje moznikov WANDRES: krtačno čiščenje od zgoraj ADVANTAGE SC prečni odvzemnik: avtomatski Dimenzije plošč Dolžina plošče: 240 – 3.200 mm Širina posamezne plošče: 140 – 1.550 mm Širina plošče: 140 – 800 mm Debelina plošče: 12 – 60 mm Vrtalne enote Vrtalne glave FTT 800: 2 obdelovalna centra s 4 vrtalnimi enotami – 5 delovnih miz Navpična vretena (v smeri X): 14 neodvisnih na glavo Navpična vretena (v smeri Y): 18 neodvisnih na glavo Vodoravna vretena (v smeri X): 3 neodvisna, z dvojnim izhodom Vodoravna vretena (v smeri Y): 3 neodvisna, z dvojnim izhodom Sistem menjalnika orodij Revolverski nosilci: 2 Pozicij v kaseti: 56 Uporaba: Avtomatska menjava orodij navpičnih vreten na 4 vrtalnih enotah dveh obdelovalnih centrov A in B. Rezkalna vretena Elektro vreteno 1: 3,7 kW (5 KM), ISO 30, z inverterjem in 3-pozicijskim stojalom za menjavo orodij Elektro vreteno 2: 3,7 kW (5 KM), ISO 30, z inverterjem in 3-pozicijskim stojalom za menjavo orodij Lateralne pozicionirne enote Delovna mesta: 2 za vzporedno obdelavo identičnih ali zrcalno obrnjenih plošč Levi pozicionirni element: fiksiran za bočno referenco Desni pozicionirni element: pomičen v smeri X, na spodnjih nosilcih, linearno voden Nastavljanje: avtomatsko glede na X-dimenzijo plošče Pogon: brezkrtačni motor z digitalnim nadzorom Funkcija: zaznavanje dejanske dolžine X v obdelovalnem centru, avtomatska korekcija vrtalnih pozicij Maks. hitrost premika: 120 m/min Nakladanje in razkladanje Vhodni sistem: 1 pasovni transporter s prečnim dovodom, lasten pogon Izhodni sistem: 1 pasovni transporter s prečnim izhodom, lasten pogon Dodatno: čistilni ventilator v območju izhoda Godpfx Aboy Ui Rnj Ieiu Vrtalne glave FHT (vodoravne): Obdelovalni centri z 2 delovnima enotama (1 LH / 1 RH enota) – 3 delovne mize. VODORAVNE VRTALNE ENOTE s 24 neodvisnimi vreteni za montažo na 2 delovni enoti VODORAVNE VSTAVITVENE ENOTE Z 5+5 APLIKATORJI LEPILA IN VLOŽKI ZA MOZNIKE PREMERA 8 mm DRŽALO ZA ORODJA za hitro menjavo vreten vrtalnih enot ENOTA ZA VBRIZGAVANJE LEPILA IN VSTAVLJANJE MOZNIH 8 mm: za vgradnjo moznikov premera 8 mm in dolžine 25-35 mm (enota je predpripravljena za te dimenzije). Potrebne so enote za vstavljanje moznikov premera 8 mm. OPOMBA: Enota za vstavljanje moznikov ni bila nikoli uporabljena in ni testirana. Preskus ni mogoč. ADVANTAGE C 3200 TRASV. 1 POS – nakladanje ADVANTAGE SC 3200 TRASV. 1 POS – razkladanje Varnostne lastnosti Standardi: CE skladni Varnostna oprema: obsežna zaščitna ohišja

Stanje: rabljeno, številka stroja/vozila: 008414, Delovno območje os X: 3140 mm Delovno območje os Y: 1500 mm Delovna površina: Z vakuumskimi konzolnimi podporniki Gijdpfx Absywafhe Isu Moč glavnega vretena: 13 kW Število krmiljenih osi: 5 osi Število orodnih mest: 13

Stanje: rabljeno, številka stroja/vozila: 008113, Maks. širina panela: 3800 mm Maks. dolžina panela: 3200 mm Gsdpfx Absw Iddhj Isiu Maks. izteg glavnega žaginega lista: 75 mm Število vpenjalnih klešč: 8

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 5.900 mm, pomik osi Y: 1.560 mm, hitrost pomika os X: 80 m/min, hitrost podajanja osi Y: 60 m/min, največja hitrost vrtenja: 20.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis working area: 5,900 mm Gjdpsyxm Swsfx Ab Ijiu Y-axis working area: 1,560 mm X-axis travel speed: 80 m/min Y-axis travel speed: 60 m/min Z-axis travel speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles (X direction): 6 Horizontal drilling spindles (Y direction): 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Motor power: 10 kW Speed: 20,000 rpm Tool magazine Number of positions: 10 Tool: positioned on the head MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT EQUIPMENT Work table with suction cups Number of suction bar rows: 10 Suction cups for securing the workpiece Vacuum pump The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8173

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ferwood Code: RU0006888 - Manufacturer Code: C0151A07 - Condition: Used - Functionality: Fully operational - Weight: 25KG - Dimensions: 70X46X34 cm - If interested, we offer an overhaul service. Please contact us. Godpsu H H Erjfx Ab Ieiu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1000007687, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.000 mm, dolžina podajanja os Z: 60 mm, skupna širina: 4.400 mm, skupna dolžina: 7.290 mm, moč: 20 kW (27,19 KM), največja hitrost vrtenja: 18.000 obr/min, Popolnoma delujoč. Še vedno v uporabi. Gsdex I A A Rjpfx Ab Ioiu

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: nepreverjeno, največja debelina roba: 22 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge Edge magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and Bottom Trimming Unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine Trimming and Corner Rounding Unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner Rounding Aggregate AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off Saw RB02 Positioning via NC Glue Scraper RCC-701 Polishing Unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying Unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber band Gjdpfeyxndbsx Ab Ieiu Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, agregat za predhodno rezkanje lepilna postaja za granulat maksimalna delovna višina 60 mm giljotina za rezanje robnega traku z role agregat za natančno odrezovanje robnega traku agregat za rezkanje presežka robnega traku z zgornje in spodnje strani obdelovanca profilni strgalo ravno strgalo Gjdpsynizlsfx Ab Ioiu polirni agregati dolžina stroja 420 cm leto izdelave 2014 teža 1200 kg CE oznaka

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Gisdpfx Abjywk Els Iou Feed speed (adjustable) m/min: 10 - 40 Cam pitch (mm): 500 FORMAT PROCESSING (for each side): - Safety cutter (pre-milling) AS 10 (approx. 1 x 5.2 kW) - 2 x hoggers DT 10 (approx. 2 x 5.8 kW) - Spray device (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt glue + pre-melter) SP30 (High Melt + Edge control EC40) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6-fold) - End trimming unit IT 90-S (approx. 2 x 0.3 kW) 28 m/min (0° - 25°) - Pre-milling unit RS 10 (2 x 0.75 kW) - Multi-profile milling unit (CNC-controlled) RF 30 (2 x 0.37 kW) 0°-25° - Multifunction unit (radius milling and profile milling) AR 30 (2 x 0.35 kW) Left: 2 x universal milling unit for grooving/rebating and profiling FB 32 (2 x approx. 5 kW) 0° - 90° Right: universal milling unit for grooving/rebating and profiling FB 30 (approx. 1 x 5 kW) 0° - 90° - Profile scraper unit RB 10 - Flat scraper unit RC 10 - Spray units (for polishing liquid) - Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) - Hot air blower - Edge trimmer PH 10 OPTION: D.O.M. unstacker with support column and mobile jib (with vacuum suction grippers) for unloading and stacking edge-processed panels.

Stanje: rabljeno, CNC obdelovalni center BIESSE Rover C 6.50 CONF.2, letnik 2007. -Delovna površina: cca 140 × 460 cm -Dimenzije stroja: 300 × 650 cm -Masa (teža) pribl. 6100 kg Gsdpfx Aow Rpd Sob Ieiu -Dve delovni glavi -Magazin: 22 mest -Vertikalni svedri: 28 kosov -Bočni svedri: 12 kosov Cena po dogovoru, na voljo takoj. Cena je brez DDV.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, številka stroja/vozila: 1000017221, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 900 mm, pomik po osi Z: 60 mm, model krmilnika: BSuite3, število vreten: 17, TEHNIČNI PODATKI Delovno območje osi X: 2.500 mm Delovno območje osi Y: 900 mm Delovno območje osi Z: 60 mm Število osi: 3 Orodje: ISO 30 Vretena Skupno število vreten: 17 Gsdpfx Aeyzpcdjb Ieiu 6 vertikalnih v osi X 5 vertikalnih v osi Y 4 horizontalna v osi X 2 horizontalna v osi Y PODROBNOSTI O STROJU Numerično krmiljenje: Programska oprema BSolid - BSuite3 OPREMA Samodejna naprava za razkladanje Vgrajeno rezilo za izdelavo utorov Sprednji varnostni in zaščitni sistemi z varnostnimi preprogami Obodna zaščitna ograja Zunanja referenca: MME002