STROJ ZA NEPREKINJENO VRTANJE - CNC

BIESSE Techno FDT CN

Stanje: zelo dobro (rabljeno), Electronic CNC-controlled machine. PC control unit type NC 500 - Software Tooling System. No. 2 powered conveyor belts - feed speed (m/min) approx. 35 - 75. Maximum working width (mm): 3200 - Minimum working width (mm): 215. No. 2 horizontal drilling supports. No. 2 drilling units for each horizontal drilling support (11 spindles per drilling unit). No. 5 lower vertical drilling supports. Drilling units for each lower vertical drilling support (No.): 2 x 1.8 HP. No. 2 upper vertical drilling supports. Spindles for each drilling unit of the upper drilling supports (No.): 2 x 1.8 HP. No. 4 upper vertical workpiece clamps. No. 2 screws (continuous) for chip removal. Digital readout of position data (axes). Total connected load (kW): 62.7. CNC controls the movement (X-axis) of the horizontal drilling supports. CNC controls the movement (Hv) of the 2 horizontal drilling supports. Hedpfxoyyw S Rj Abxenn CNC controls the movement (X-axis) of the vertical drilling supports. CNC controls the movement (axes Y1 and Y2) of the drilling units. CNC controls the movement (Y-axis) of the stops. CNC controls the movement (X-axis) of the workpiece clamps. CNC controls the movement (X-axis) of the conveyor belts. The CNC controller manages all programming for automatic work cycles.

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line For all inquiries, please contact 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Hnodpfx Aboilqvrexen Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control NC 500 (Software Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); Hjdpfxst Ig A Ss Abxenn - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal The second drilling machine is connected to the CNC of the first machine.

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel-inserting line, consisting of: VZ0250A) LOADING STATION "RBO" Tornado C 1300, with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min. - No. 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles); - No. 4 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control unit NC 500 for both machines. VZ0250C) AUTOMATIC DRILLING AND DOWEL-INSERTING MACHINE "BIESSE" Techno SDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min - No. 2 horizontal drilling supports (each with 6 horizontal supports – gluing and dowel-inserting tools) - No. 2 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 2 upper vertical workpiece clamps - No. 2 endless screws for chip removal VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Mod. GP 11 Hodpfsd Nviqjx Abxenn VZ0250E) OUTFEED STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom constant table height (consistent infeed height) maximum planing width: 600 mm maximum planing height: 280 mm Hnodpfxshuthys Abxjn planerheads with strip knives immediately ready for operation

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Hjdpfxjhlp Efe Abxsnn

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Double-aggregate sander, two lower aggregates with 2 x 7.5 kW main motor power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been overhauled, the conveyor belt is in very good condition. New graphite shoe. The machine is equipped with two bottom aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt speed: 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Total rated power: 21 kW. Maximum workpiece height: 160 mm. The machine has two lower working rollers. The conveyor belt is positioned above the workpiece. Hsdefxpbmjpfx Abxonn

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Filter za izsesavanje prahu in žagovine. Hnedpfjtzld Ujx Abxsn

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.150 mm, skupna širina: 1.000 mm, skupna višina: 1.550 mm, vrsta vhodnega toka: trifazni, skupna masa: 700 kg, teža obdelovanca (maks.): 500 kg, vhodna napetost: 400 V, hitrost pomika os X: 30 m/min, širina transportnega traku: 400 mm, moč: 2 kW (2,72 KM), vhodna frekvenca: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. Hedsw Av Ivepfx Abxonn The SA380 brush sanding machine offers the following advantages: 1. Flexible: Handles all profiles including beams up to 400mm wide and 260mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction unit 3. Powerful: Automatic feed speed of 13–30 m/min ensures high throughput 4. Superior results: 8-axis system with flexible Fladder brushes delivers excellent finishing: 4 brushes sand WITH and 4 sand AGAINST the feed direction (4 sides, 2 per side) 5. Safe: Fully enclosed construction, requiring only a single 120mm extraction connection. The SA250 and SA380 models are extremely robust and manufactured entirely in Denmark. We currently have two demonstration machines in stock.

Leto izdelave: 2005, stanje: dober (rabljeno), številka stroja/vozila: C9 15840, Stroj za profilno krtačenje Tagliabue LB 2 Model: LB 2 TEHNIČNI PODATKI: Hnjdpfx Abjg Rn Iaexen Leto izdelave: 2005 Tagliabue robni brusilnik s 4 nihajnimi brusilnimi enotami. Dva navpična valja in dva notranja prečna valja za prečno krtačenje.