Pretočna vrtalna naprava

BIESSE SKIPPER 100

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.000 mm, dolžina podajanja os Z: 60 mm, Znamka: BIESSE Model: SKIPPER 100 Leto izdelave: 2007 Prodajalec Belgija: HACO Uporabljal se je za pohištvo, kuhinje, pohištvo po meri, panele in drugo. Stroj je takoj na voljo za prevzem. Tehnični podatki: 3-osni (x-y-z) CNC obdelovalni center – "labji vrat" Premično plošča, fiksna delovna glava – vodoravna plošča Integrirana zaščita delovne glave in sprednje varnostne blazine Kodpjychcwefx Abbewt Odmikalna miza (z motoriziranimi trakovi) Delovno območje (x - y - z) mm 3000 x 1000 x 60

Stanje: rabljeno, številka stroja/vozila: 006370, Type of applied edging: thin edge, thick edge Gluing system: EVA Joint milling: yes Multifunction unit: yes Kwjdpfel Txw Hjx Abbst Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 units

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Vrtalni stroj Biesse Skipper 100 Delovno območje X : 3000 mm Delovno območje Y : 1000 mm Delovno območje Z : 60 mm Avtomatski nakladalni sistem z motoriziranim trakom 1+1 vertikalni elektrovreteno s 3 osmi (spodnji + zgornji) 1+1 neodvisen žagin list (spodnji + zgornji) Kodjyay H Nspfx Abbewt Vretena: Skupaj 78 neodvisnih vreten 39 na zgornji glavi 39 na spodnji glavi Sestava posamezne delovne glave: 29 neodvisnih vertikalnih vreten: 19 na osi X in 10 na osi Y 8 neodvisnih horizontalnih vreten na osi X 2 neodvisni horizontalni vreteni na osi Y Pogoni in krmiljenje: Osi z NC krmiljenjem Brezkrtačni servo motorji Mazanje: Avtomatski centralni mazalni sistem za vse gibljive osi Avtomatski izpustni sistem z motoriziranim trakovim transportom Programska oprema: BiesseWorks Stanje: dobro

Stanje: rabljeno, številka stroja/vozila: 005836, Delovno območje os X: 3000 mm Delovno območje os Y: 1000 mm Moč glavnega vretena: 3,5 kW Število krmiljenih osi: 3 osi Kwodpfx Abswuckusbet Število vrtalnih vretenc: 82

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Moving horizontal table (workpiece), stationary machining head Control system (BiesseWorks software), with separate electrical control cabinet Machining head safety enclosure, safety tread mats Infeed table (workpiece support) at entry side No. 2 pneumatic workpiece clamping cylinders within the working area Outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm: 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1300 x 60 (approx.) Total connected load (kW): 24 WORKING UNITS (TOP): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW) WORKING UNITS (BOTTOM): Kjdewb Allopfx Abbjwt Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW)

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable workpiece plate, stationary working head – Horizontal workpiece plate Control system with Biesse Works software Safety cabin for working head – Safety tread mats No. 1 Infeed table (with conveyor belt) left No. 2 Workpiece clamping block stops within the working area No. 1 Outfeed table (with conveyor belt) right Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1000 x 60 Total connected load (kW): 20 WORKING UNITS (TOP): - No. 1 Electrospindle with HSK D-50 adapter (power 4.8 HP) with static frequency converter - No. 1 Grooving saw (fixed in X direction), diameter 150 mm, power 2.3 HP, with static frequency inverter - No. 29 vertical drilling spindles - No. 10 horizontal drilling spindles (8 in X, 2 in negative Y direction) WORKING UNITS (BOTTOM): - No. 1 Electrospindle with HSK D-50 adapter (power 4.8 HP) with static frequency converter Kedpfx Aedh Tf Ujbbowt - No. 1 Grooving saw (fixed in X direction), diameter 150 mm, power 2.3 HP, with static frequency inverter - No. 29 vertical drilling spindles - No. 10 horizontal drilling spindles (8 in X, 2 in negative Y direction)

Stanje: dober (rabljeno), Koda: 0132 Blagovna znamka: BIESSE Model: SKIPPER 100 – CE-standard CNC delovni center za pohištvo, kuhinje, pohištvo po meri, obdelavo plošč in raznovrstnih materialov – CE-standard – leto izdelave 2006 Tehnični podatki: 3-osni (x-y-z) CNC obdelovalni center – labodji vrat Premična plošča, fiksna delovna glava – plošča je nameščena vodoravno Popolna zaščita delovne glave in sprednje varnostne preproge Numerični krmilnik z BiesseWorks programsko opremo Vhodna miza (z motoriziranimi trakovi) levo Št. 2 prijemalni klešti za vpenjanje plošč (za vnos v delovno območje) Izhodna miza (z motoriziranimi trakovi) desno Uporabna (maksimalna) delovna površina (x-y-z) mm 3000 x 1000 x 60 Dimenzije (minimalno) obdelovancev (x-y-z) mm 90 x 70 x 8 Dimenzije (maksimalno) obdelovancev (x-y-z) mm 3000 x 1000 x 60 (za plošče daljše od 2000 mm je minimalna debelina 13 mm) Skupna instalirana moč (kW): 20 (približno) Kedpsxqntdofx Abbswt Spodnje delovne enote: Št. 1 vertikalna elektro vreteno HSK D-50 (moč 4,8 KM) z inverterjem Št. 1 krožna žaga (os x) premer 150 mm (moč 2,3 KM) z inverterjem Št. 29 vertikalnih vrtalnih vreten Št. 10 horizontalnih vrtalnih vreten (8 v osi x + 2 v osi y) Zgornje delovne enote: Št. 1 vertikalna elektro vreteno HSK D-50 (moč 4,8 KM) z inverterjem Št. 1 krožna žaga (os x) premer 150 mm (moč 2,3 KM) z inverterjem Št. 29 vertikalnih vrtalnih vreten Št. 10 horizontalnih vrtalnih vreten (8 v osi x + 2 v osi y) Transport za nakladanje in razkladanje plošč: sestav iz aluminijastih profilov, transportna miza na trak za prenos plošč/dvižna prečka Programski sistem za obdelavo BiesseWorks Stisnjen zrak 7/8 bar Skupna moč: 20 kW Skupne mere – (glejte prilogo) Teža stroja: 2700 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, I am selling the veneer splicing machine Kuper FW-1200E. Kwodpfjwg Ty Rex Abbjt Very good condition. Available immediately.

Stanje: rabljeno, Numerical control XP 600 with Biesse Works software Working area in X-axis: 3000 mm Working area in Y-axis: 1000 mm Kwodpfx Asuickyjbbet Working area in Z-axis: 60 mm Automatic loading system with motorized belt transfer No. 2 clamps for securing and transporting panels No. 1+1 vertical electrospindle, 3 axes (top + bottom) No. 1+1 independent saw blade (top + bottom) No. 29+29 independent spindles for vertical drilling in 'X and Y' direction (top + bottom) No. 10+10 independent spindles for horizontal drilling in 'X and Y' direction (top + bottom) Automatic unloading system with motorized belt transfer

Stanje: rabljeno, Numerical control XP 600 with Biesse Works software Working area in X-axis: 3000 mm Working area in Y-axis: 1000 mm Working area in Z-axis: 60 mm Automatic loading system with motorized belt transfer Kwedjpp Thnspfx Abbjt No. 2 clamps for securing and transporting panels No. 1+1 vertical electrospindle, 3 axes (top + bottom) No. 1+1 independent saw blade (top + bottom) No. 29+29 independent spindles for vertical drilling in 'X and Y' direction (top + bottom) No. 10+10 independent spindles for horizontal drilling in 'X and Y' direction (top + bottom) Automatic unloading system with motorized belt transfer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Uporabna dolžina (os X) panelov najmanjša/največja: 200 mm - 3200 mm Uporabna širina (os Y) panelov najmanjša/največja: 35 mm - 900 mm Uporabna debelina (os Z) panelov najmanjša/največja: 8 mm - 60 mm 1 vertikalni elektromandrel (4,5 kW) ISO 30 1 krožna žaga (premer 120 mm) 10 neodvisnih vertikalnih vrtalnih vretenc Kwsdpex Rcy Iofx Abbot 6 neodvisnih horizontalnih vrtalnih vretenc (4 v osi X in 2 v osi Y) Laserski sistem za branje Numerično krmiljenje (programska oprema bSolid)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, I am selling a double-sided through-feed CNC machining center Biesse Skipper 100, year of manufacture 2008. Very productive and fast. Automatic infeed table. Working length: 90–3000 mm Working width: 70–1000 mm Working height: 8–60 mm Configuration per side: Milling head 3.5 kW, 7000–18000 rpm 29+8+2 drilling heads Kwedpfxsq Diw Aj Abbst 1 grooving saw D.150 mm, X-axis direction Software: BiesseWorks, CD included. Version with outfeed table. Condition: very good! Fully functional. Automatic centralized lubrication system and extraction hoods. Complete with safety barriers, transport elements, and CE-compliant features. CE certificate and full documentation included.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, I am selling a double-sided through-feed CNC machining center Biesse Skipper 100. Year of manufacture: 2006. Very productive and fast. Automatic infeed table. Working length: 90–3000 mm Working width: 70–1000 mm Working height: 8–60 mm Configuration per side: Milling head: 3.5 kW, 7,000–18,000 rpm Kwsdpfehlhigjx Abbst 29+8+2 drilling heads 1 slotting saw Ø 150 mm, X-direction Software: BiesseWorks. CD included. Condition: Very good! Fully functional. Automatic central lubrication system and extraction hoods. Complete with safety barriers, transport elements, and CE points. CE certificate and full documentation included. Requires repair: 1 piece safety mat.

Stanje: skoraj kot novo (rabljeno), Stroj za šivanje z nitjo in lepilom Cik-cak šivanje Kodpfjwnff Ijx Abbewt Grelec z vpihom zraka Upravljanje s pedalom Napajanje 380V