N.C. vrtanje in dugi vstavljanje LINE

BREMA (BIESSE Group) 2 x Vektor (GLR-X 30-13 + XK 40-13) + ID

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 Hodpfogwbbqex Anpow No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 9.300 h, nosilnost: 3.500 kg, dvižna višina: 4.700 mm, prosto dvigovanje: 1.500 mm, težišče tovora: 500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.200 mm, vrsta prenosa: samodejen, napetost baterije: 80 V, teža baterije: 1.580 kg, dolžina vilic: 1.150 mm, stanje pnevmatik: 95 odstotek, Tip prednje pnevmatike: superelastične pnevmatike (črne), tip zadnje pnevmatike: superelastične pnevmatike (črne), lastna masa: 6.400 kg, skupna višina: 2.200 mm, Oprema: bočni pomik, kabina, osvetlitev, popolna servisna zgodovina, spojka prikolice, vilice za palete, Prodajam rabljeni Toyota električni viličar tip 8FBMT 35, letnik 2018, s triplex prostodvižnim drogom! Višina gradnje: 2,2 m Višina dviga: 4,7 m Nosilnost: 3500 kg Polne gumene pnevmatike 95% Hodexzr E Espfx Anpsw Hidravlični bočni pomik Dolžina vilic: 115 cm Polnilec je vključen Na viličarju sta bila že obnovljena oba pogonska motorja in zadnja os, prav tako je bila že zamenjana baterija! Viličar je takoj na voljo! Takoj pripravljen za uporabo! Viličarja si lahko ogledate in ga preizkusite pri nas! Prevoz lahko organiziramo po želji!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Pnevmatska stiskalnica za lepljenje lesa po debelini. TECHFA tip PTD 6000 Maksimalne dimenzije lepljenih elementov: - dolžina 6300 mm Hjdeyivr Hspfx Anpew - širina 160 mm - višina 850 mm Stiskalnica razdeljena na 4 sekcije.

Stanje: zelo dobro (rabljeno), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with pump) No. 4 Vertical support columns for the upper crossbeam No. 1 Upper horizontal crossbeam (for movement of the mobile carriage) No. 1 Motorized mobile carriage connected to horizontal arms No. 2 Adjustable horizontal metal arms with vacuum suction cups No. 2 Floor rollers for feeding panel stacks into the Loader No. 1 Motorized roller table for supplying panels to the Unloader, also equipped with several motorized cross conveyors (at 90°). Dimensions approx. 7232 mm Hsdjd Rg Dpepfx Anpsw Separate electrical and control panel OMRON electronic control Perimeter metal safety and protection fences Working capacity (cycles/minute): approx. 16 - 20 Min/max panel thickness: approx. 10 - 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, HYDRAULIC CLAMP FOR EDGE GLUING OF WOODEN ELEMENTS HSKG Category: VI – Hydraulic presses for gluing wooden elements The HSKG device is used for edge gluing wooden cut elements under high pressure from hydraulic cylinders. The clamping force per cylinder ranges from 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is performed in a stack within the loading area dimensions. Stack formation is achieved by hydraulic pressing between movable vertical beams and the vertical slats of the cross cylinders. Both elements of the stack forming system are equipped with wooden or metal inserts matching the stack profile of the slats. Hsdpfjtrl R Asx Anpsw Edge gluing wooden elements improves frame quality, reduces machining costs, and minimizes wood waste. Technical and operational data (standard HSKG model – 6m) Number of loading bays pcs 4 Dimensions of a single loading bay - Loading height mm 1140 - Slat length in each bay mm 1530 Maximum slat width mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electrical supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of cylinders per bay: - Ø 50x100 – 3 pcs. - Ø 80x100 – 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Machine weight kg 4800 On request, we also manufacture custom control configurations for the pressing cylinders according to the anticipated length of the glued elements, as well as different bay lengths and quantities per press set, and a maximum working width up to 220 mm with increased pressing force.

Stanje: rabljeno, Kompletna linija za žaganje IDC000103 1. SKUPINA ŽAG Soderhamn Eriksson 240-12 Hjdpfx Aneu E Hu Depew ARI Vislanda KS12.2 2. SKUPINA ŽAG Soderhamn Eriksson 240-12 Ari Vislanda DS74+1 3. ARI Vislanda KT5A-230 Hitrost do 60 m/min.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, The line is fully operational and was modernized in 2019. The modernization included, among others, the hydraulic installation and control system. Hsdpfeim Ez Dox Anpjw Min. material thickness: 20 mm Max. material thickness: 130 mm Min. material width: 30 mm Max. material width: 130 mm Min. input material length: 250 mm Max. input material length: 1600 mm Min. output material length: 250 mm Max. output material length: 300 mm

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Hodjifnzdepfx Anpjw Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Stanje: rabljeno, Leto izdelave: 2019, Highly flexible vertical machining center for milling, drilling, and cutting. The BREMA patent for processing. Hodpfx Ansl Ikzgopsw Due to its vertical orientation, this machine series is the most flexible and productive machine of its kind, achieving an extremely high quality standard. In addition, the automatic return/rotation system for the panels ensures fully automatic operation. It is possible to work on all 6 sides of the panel at a height of up to 1300 mm. Working dimensions: * Length: 300 - 2500 mm * Height: 60 - 1300 mm * Thickness: 10 - 80 mm * Maximum weight: 50 kg Machine programming and control system operated via PC - TPA Albatros software. The programming editor, featuring a high-level software interface, allows for simple, intuitive machine programming and also offers: * Linear, circular, and spiral interpolation * Double zero point * Mirror program management * Turret tool diameter optimizer * Independent spindle diameter optimizer * DXF file conversion (geometric conversion) * Import of worklists in ASCII format * Additional key for office-based programming * Barcode scanner * 17-inch LCD monitor * Professional operating system Windows 7 Panel feeding and handling via motorized vertical transfer with rollers and rubber-coated pressure units for securing the panel during processing. Includes a motorized conveyor carpet length of 2000 mm, with electronically adjustable speed via converter. Photo sensors and NC program ensure sequential feeding of one or multiple panels as selected by the operator. Height reading system for panels consisting of an independent axis capable of reading the panel height before loading into the machine. Reading tolerance for dimension: +/- 0.15 mm. If the tolerance is exceeded, a message is displayed and the operator and machine stop the active operation. Panel thickness reading system using a mechanical probe. Horizontal vice – M.O. axis: allows the program to determine the workpiece thickness. Vertical vice – M.V. axis: allows the program to determine the workpiece height dimension. Chain - X axis: Patented double section with laser photo sensors capable of reading the reference zero point prior to machining operations. The double section allows machining on the underside of the panel, permitting processing of all 6 panel sides. Brushless motors with programmable speed control via NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch, arranged as follows: * 7 spindles oriented on X axis * 17 spindles oriented on Y axis Powered by a high-frequency motor, which enables spindle rotation changes up to 7,000 rpm. The brushless motor allows control of drilling depth and feed speed. Upper turret milling group with 10 positions and NC-controlled tool change. 11 kW motor with direct motion transfer to the tool up to 18,000 rpm. The turret rotates via a controlled axis with a brushless motor, enabling...

Leto izdelave: 2006, stanje: novo, I am selling 12 sets of new saw blades suitable for HOLZMA panel dividing saws. Hsdpfsg Dvutjx Anpew Main saw blade FABA 600 x 5.8 / 4.0 x 60 Z 72 Scoring saw blade AKE 26 200 45H 200 x 4.8 - 5.8 x 45 Z=36 Total price: 1000 euros. Available immediately.