Barsso Poedermenger, Type Barmix 300L nakup rabljenega (39.250)

Stanje: rabljeno, FOREST-LINE SERAMILL V3 270 2T je portalni glodajući centar za visokopreciznu obradu, visoku tačnost i pouzdanost procesa. Tehničke karakteristike: 2 stola (dužine 3000 mm i 4000 mm, širina 2000 mm), X osa 5000 mm (sa jednim stolom), Y 3400 mm, Z 1250 mm, osa A ±135°/2,5° i C 360°/2,5°; prolaz između stubova 2700 mm, maksimalna težina obratka na stolu 10.000 kg. Glavni podaci: prihvat vretena SK50, obrtaji 10–6000 min⁻¹, motor vretena 31 kW, obrtni moment 430 Nm, ukupna potrošnja 90 kVA; posmici osa 1–30.000 mm/min; brzi hod X 30.000 mm/min, Y 40.000 mm/min, Z 30.000 mm/min; priključak 3x 400 V 50 Hz. Oprema: magacin za alat 120 mesta, držači alata 700 kom, automatsko merenje alata BLUM, mjerni sondor obratka M&H. Dostiže uske tolerancije; pogodan za automobilsku industriju, vazduhoplovstvo i svemirsku industriju, proizvodnju alatnih mašina, medicinsku tehniku i industriju satova. Dksdjy T N Ttjpfx Anuju

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Baterija HAWKER 80 Volt tip 8 PZM 1240 Mere: 1495 x 995 x 780 mm Dkodpfx Aneyvulmjuou Leto izdelave: 2021 Druge velikosti (24V, 48V, 80V) na zahtevo!

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Vreteno ISO 50 (DIN 69871-B) Vlečni vijak DIN 69872-B Vpenjalna sila: 1900 daN Avtomatska B-os: 1,0 stopinje Avtomatska C-os: 2,5 stopinje Dsdpfx Ajyf Dp Eonueku Moč pri 60/100 %: 22/30 kW Območje vrtljajev: 60–3000 min⁻¹ 2-stopenjsko območje vrtljajev Avtomatsko mazanje (zrak-olje) Menjalnik: Zyklo-Palloid, sistem Klingelnberg, HPG-5, kakovostni razred 6 po DIN 3965 Dolžina: 1200 mm Širina: 800 mm Višina: 700 mm Teža: 320 kg Prosimo, upoštevajte: Podatki na tej strani so bili zbrani po najboljšem znanju in, kadar je mogoče, pridobljeni od proizvajalca. Podatki so podani v dobri veri, vendar točnosti ni mogoče zagotoviti. Zato ti podatki ne predstavljajo zastopstva ali pogodbenih pogojev. Priporočamo, da preverite vse ključne podrobnosti.

Leto izdelave: 1992, stanje: nepreverjeno (rabljeno), Carrier bag machine and double net clipper, manufacturer Strapack, suitable for apples and potatoes, 1–5 kg possible. The machine is in very good condition, was in operation for only about 10 years. The machine is equipped with 4 carriages, providing a capacity of approx. 15–20 bags of 2 kg per minute. The machine is fully operational and comes with all accessories. The machine has been fully overhauled. Price on request. Spare parts for EW20, EW10 and net clipper UC20 also available for sale. For enquiries, please contact: Djdpfx Aohh Idronusku

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Hot air generator Brand: Airpool Year of manufacture: approx. 2015 Type: B23 Model: PKA 140N-10A Airflow at 15°C: 10,500 m³/h Dkedpfx Ansgv Auleusu

Leto izdelave: 1997, stanje: rabljeno, številka stroja/vozila: B-388, FIL FA 160 bed-type milling machine with HEIDENHAIN TNC-360 control Dedogcuzrjpfx Anujku

Stanje: zelo dobro (rabljeno), Extraction and dedusting unit Nedermann Type 663 with 2 extraction arms Dodpfjiyyxcex Anujku Very good condition, directly from production!!!

Stanje: novo, Panel Saw ALTENDORF F 25, Type 1 -Demonstration Machine- Double roller carriage tilt function Manual height and tilt adjustment Dkjdou R S Dbepfx Anuju Parallel fence with manual fine adjustment Angle and mitre fence Large extraction hood Basic scorer with LED lighting ----- Technical Data ----- Swivelling range: 0 - 46 ° Carriage length: 3,200 mm Parallel fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor output: 5.5 kW (7.5 HP) Working table height: 880 mm Extraction ports Ø: 120 + 80 mm - new demonstration machine -

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, HSM roll cutting saw with extractor and acoustic enclosure. TYPE: RT650/2800 Dkedpet N T A Iofx Anueu Year of manufacture: 2014 Voltage: 230 / 400 V – 50Hz Power: 17 kW Roll diameters: 300 – 650 mm Roll widths: 1270 – 2750 mm Machine dimensions (LxWxH): 4690 x 2100 x 3000 mm Weight: 5.5 tons

Stanje: kot nova (razstavni stroj), Various designs available, such as round, hexagonal, or square, and in smooth, cross-serrated, or both longitudinal and cross-serrated versions. A current list of available as-new and new clamping heads SK32/SK42/SK52/SK65/SK80/SK100 can be found on our homepage. We look forward to your inquiry. STALEX Werkzeugmaschinen GmbH Dedpsh Dmamofx Anujku

Stanje: dober (rabljeno), 130 m policnega regalnega sistema Schäfer, tip R3000 Rabljen artikel, v odličnem stanju, glejte slike. Višina 2,5 m Globina 80 cm Nosilnost na polico/nivo 250 kg Širina polja pribl. 128 cm Pogajalna cena: 26.800 EUR, neto, iz skladišča Ponudba vključuje: 101 kos vertikalnih nosilcev oz. okvirjev, 2,5 m, pocinkano 600 kos polic, 250 kg nosilnosti na polico, pocinkano 34 kos diagonalnih povezav za dodatno stabilnost. 6 nivojev na polje (seveda je možen večji števil nivojev, ob dodatnem plačilu) Na voljo tudi z širino polja 100 cm! Možne so tudi druge konfiguracije. Na voljo višine 2,5 m ali 3,5 m. Izdelek je na zalogi. Transport in montaža možna po dogovoru. Ogled možen kadarkoli po predhodnem dogovoru. Dodatne informacije na zahtevo. Stalno več kot 5000 m policnih regalov različnih proizvajalcev na zalogi. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do vmesne prodaje! Glejte naše splošne pogoje, vse cene so brez DDV, iz skladišča.) Lenox Trading – vrhunska skladiščna tehnika in regalni sistemi za težke obremenitve, rabljeni in novi Opis: Iščete kakovostne skladiščne regale za nakup? Lenox Trading je z okoli 100 lastnimi zaposlenimi eden največjih trgovcev z novo in rabljeno skladiščno tehniko v celotnem območju DACH (Avstrija, Nemčija, Švica). ⚡ TAKOJ DOVOLJNO: • Več kot 10.000 tekočih metrov regalov, takoj dostavljivo • 20.000 m² skladiščnih ploščadi in jeklenih konstrukcij, takoj na voljo • Vsak teden 30–50 tovornih vlačilcev za maksimalno izbiro 📦 NAŠA PONUDBA (UGODNO KUPITE SPLETU): Ne glede na to, ali kupujete paletne regale, regale za težke obremenitve, visoke regale, policne regale ali regale za IBC-kontejnerje – dostavljamo in montiramo po vsej Evropi s svojo LASTNO ekipo! Vključno z načrtovanjem v CAD, transportom, demontažo in montažo. 🏭 VRHUNSKE BLAGOVNE ZNAMKE, RABLJENE IN IZ STEČAJA / LIKVIDACIJE: Dkodpfx Ajd Nftxonuju • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tip MPB, tip E, regal za težke obremenitve Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Regali s konzolnimi rokami (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠA DRUGA PODROČJE POSLOVANJA: SPLETNE DRAŽBE IN LIKVIDACIJE Pri demontaži in izpraznitvi ponujamo resnično celovito rešitev: 1. Nakup po fiksni ceni: nakup blaga, opreme in celotnih skladiščnih zalog, vključno z popolnim čiščenjem prostora. 2. Draženje na podlagi provizije: izvedba dražb po naročilu. Naša celovita storitev, ki jo izvajajo naši zaposleni: katalogizacija, priprava prostorov, ogled, izročitev blaga, logistika, razstavljanje in popolno čiščenje. Ne glede na to, ali ste na nas naleteli zaradi regalov za težke obremenitve ali iščete pocinkane regale za težke obremenitve / regalski sistem za težke obremenitve – zagotavljamo vam najboljše pogoje. Kontaktirajte nas za neobvezujočo ponudbo!

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 26,709 [h] COUNTER SPINDLE - Max. bar diameter: 13 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 16,854 [h] - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] - Z stroke: 50 [mm] - Driven tool speed: 8,000 [rpm] Dksdpfx Anjuhawhjusu LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] * Y travel: -9.5 / +28 [mm] - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 16 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2,850 x 1,100 [mm] - Machine height: 1,480 [mm] - Machine weight: 2,000 [kg] EQUIPMENT - Control: Traub TX 8i - Driven guide bushing - Parts removal device - Parts conveyor belt - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 [l] * with paper filter - Bar loader: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5

Stanje: rabljeno, TECHNICAL DATA Dkodpfouhawuex Anusu - Number of axes: 7 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 4 SUB MACHINING - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Bushings: 4 - Set of sleeves and collets for bar loader - Tool presetting device

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] Dodpjuhaw Usfx Anujku - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 [mm] - Y travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 - X/Z travel: 35/79.5 [mm] FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] - X/Z travel: 415/138.5 [mm] SUB OPERATIONS - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 6 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. workable length: 160 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.1° - Number of tool holders: 1 TOOL HOLDER 1 - Number of positions: 8 Dodpfeuhaz Tox Anuoku - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 3 SUB OPERATIONS - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Installation space: 1100 x 7270 mm - Machine height: 1950 mm - Machine weight: 3,000 kg MACHINE HOURS - Power-on hours: 22,834 h EQUIPMENT - Control: Fanuc PNS DECO - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Coolant tank - Bar feeder: ROBOBAR SSF

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 32 mm - Travel: 310 mm - Spindle speed: 280 – 7,000 rpm - Spindle drive power: 7.5 kW - Minimum C-axis resolution: 0.01° SUB SPINDLE - Max. bar diameter: 32 mm - Z-axis travel: 150 mm - Spindle speed: 280 – 7,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.01° - Number of turret heads: 1 UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Driven tool speed: 5,700 rpm - Driven tool power: 2.8 kW BUSHING HOLDER 1 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm ELECTRICAL SPECIFICATIONS Djdpfx Anjuha Elsueku - Supply voltage: 200 V - Total drive: 8 kVA WEIGHT AND DIMENSIONS - Footprint: 2,645 x 1,403 mm - Machine height: 1,680 mm - Machine weight: 3,880 kg EQUIPMENT - Control: Fanuc 16 iTB - 3-color status lamp - Parts removal - Parts conveyor belt - Chip conveyor - Coolant tank - Bar feeder: IEMCA BOSS 432/32LL - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] Dedpfx Ansuha Tvsusku - Max. machining length: 170 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 2.2 [kW] - Minimum C-axis resolution: 1 [degree] - Number of bush holders: 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 BACK MACHINING - Number of positions: 7 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 11 [kW] WEIGHT AND DIMENSIONS - Required space: 1640 x 1200 [mm] - Machine height: 1725 [mm] - Machine weight: 1950 [kg] OPERATING HOURS - Operating hours: 21,523 [h] ACCESSORIES - Control: Fanuc Oi-TD - Driven guide bushing - Parts removal unit - Parts conveyor belt - Parts ejector - Coolant tank - Bar feeder interface - Bar feeder: fedek - Fire extinguishing system * NB: Functional capability not guaranteed. Inspection by a qualified company on the buyer's behalf is recommended. - Electrical transformer

Stanje: rabljeno, CNC strojno orodje za obdelavo dolgih kosov, TORNOS DECO 13a. Dedpfxsuhhp Ej Anueku

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 2021, 3D AC SERVO SkyCNC WK Series CNC Milling Machine – 2050 mm x 3050 mm x 220 mm High-precision – milling and drilling at extremely high speed and quality. As a CNC milling machine manufacturer, Pfeifer Technology, with the SkyCNC CNC milling and engraving machines, is your experienced partner. Our PFEIFER technology SkyCNC WK series milling machines, equipped with high-precision ball screw drives on all axes, deliver maximum accuracy, precision, and speed – all at an attractive price-performance ratio. Dkedpfx Ansbnpgxjuou Thanks to the robust steel base frame (approx. 4 t), these machines offer high static rigidity, enabling trouble-free processing of solid wood and various metals. The sophisticated arrangement and distribution of 35 mm linear rails and guides, along with the massive gantry featuring vibration-damping properties, are distinguishing features of our CNC milling machines. All machine components and servo drive units are the result of years of development and experience. The powerful servo motors are highly efficient and backlash-free, directly coupled to the German-manufactured precision ball screws, guaranteeing a zero-backlash drive system to satisfy the highest requirements. The advanced freely programmable CNC controller, equipped as standard on all PFEIFER technology SkyCNC WK series milling machines, allows for flexible intervention via touchscreen under all production conditions. With this CNC control system, you can generate your milling data, import CAD/CAM data, and process them independently of a computer. Options such as an automatic tool changer (up to 16 tools), a solid aluminum vacuum table, various tool/workpiece cooling solutions, automatic lubrication system for all axes, and many other intelligent features round off this milling system. With the PFEIFER technology SkyCNC WK series, you receive a reliable and powerful large-format gantry milling system for your applications. Upon request, we can supply corresponding CAD/CAM ARTCAM SKYCNC control software: 2.5/3D PFEIFER SKYCNC Milling & Engraving Software in German for Windows® operating systems, or ArtCAM Pro/ArtCAM Insignia software in German/Russian and other languages upon request. Technical Data: - Drive system: high-precision ball screws on X, Y, and Z axes made from German precision production - Working speed: 15 m/min - XYZ working travel: 2050 x 3050 x 220 mm - Table size (vacuum table with milled vacuum channels): 2000 x 3000 x 30 mm - XYZ repeatability: 0.02 mm - XYZ accuracy: 0.01 mm - Software compatibility: Type3, ARTCAM, MASTERCAM, FeatureCam, etc. - Formats: ISO standard G-code, FANUC compatible - Options: Spindle motor / tool changer / vacuum table as per customer requirements - Warranty: 1 year - Spindle power: from 5.5 kW (other spindle powers optional) - Spindle speed: 6000 – 24000 rpm (depending on requirements) - Spindle mount: BT30 / ER20 (other mounts optional) - Drive: AC servo motors on all axes - Tool changer: 4–8 magazine positions - PDSP control RTU / MTU (Remote Terminal Unit) - Power supply: AC400V±10% 50Hz - Power consumption: 10–15 kW (depending on configuration) - Dimensions: 4500 (L) x 3100 (W) x 2500 (H) mm - Weight: 4000 kg

Stanje: rabljeno, CNC stroj za obdelavo dolgih gred TRAUB TNL 12K. Dsdpfjzxigusx Anujku

Stanje: rabljeno, CNC stroj za obdelavo dolgih gred TRAUB TNL 12K. Dkodpfx Anszxigzeueu

Stanje: rabljeno, CNC stroj za obdelavo dolgih gred TRAUB TNL 12K. Dksdpfxjzxig Us Anuju

Stanje: rabljeno, CNC stroj za obdelavo dolgih gred TRAUB TNL 12K. Dkodpfozxihlox Anueu

Stanje: rabljeno, CNC dolgo stružni avtomat TRAUB TNL 12/7 Dksdpfezxii Ajx Anueu

Stanje: rabljeno, CNC avtomat za obdelavo dolgih kosov TSUGAMI B0206 E-III. Dkedpszxik Tjfx Anuju