Mütek Mvz 7,5 Kw nakup rabljenega (48.197)

Stanje: zelo dobro (rabljeno), SEW Eurodrive RF73DT80N-4BM motor-reduktor 0,75 kW 1380/31 obr B5 zavoro Iajdpfxeywn Uke Alaot

Stanje: zelo dobro (rabljeno), Na prodajo je kompleten industrijski agregat, sestavljen iz Siemensovega elektromotorja in pogonske enote (črpalka / menjalnik). Naprava je nameščena na robustnem podstavku, pripravljena za uporabo v industriji, delavnici ali kot del stroja. Tehnični podatki: Proizvajalec: Siemens Model: 1LA5083-2AA20 Moč: 1,1 kW Obrati: približno 2850 obr/min Napajanje: 220/380 V Frekvenca: 50 Hz Stopnja zaščite: IP54 Način montaže: B3 Stanje: Rabljeno, vidne sledi uporabe (praskanje, sledi na laku). Tehnično brezhibno delujoč. Opomba: Iaedpfeywn Nzex Alaot V priključni omarici je poškodovan manjši plastični del (viden na sliki). To ne vpliva na delovanje naprave.

Stanje: novo, Prodam električni pogon ventila EMG-DREHMO DR 39 B-40. Naprava je iz skladišča – stanje novo, neuporabljeno. Pogon je namenjen za avtomatsko upravljanje ventilov v industrijskih instalacijah (voda, plin, tehnološke instalacije, energetika). Tehnični podatki: • Proizvajalec: EMG-DREHMO • Tip: DR 39 B-40 • Leto izdelave: 2005 • Navor: 40 Nm Iaodpfx Aoyutpgelajt • Napajanje: 380–420 V / 50 Hz • Moč motorja: 0,40 kW • Hitrost: ca. 30–40 vrt/min • Zaščita: IP67 Stanje: Naprava nova – skladiščena. Vidni sledovi prevoza: rahlo ukrivljeno ročno kolo, manjša razpoka ohišja pri menjalniku (vidno na fotografijah). Ni preizkušeno pod napetostjo – prodaja kot skladiščna naprava / pred montažo je potrebno testiranje. Komplet vključuje: • pogon ventila EMG-DREHMO • ročno kolo za ročno upravljanje Vizualno stanje kot na fotografijah.

Stanje: novo, Prodajam profesionalni radialni ventilator priznanega nemškega proizvajalca ELEKTROR – Karl W. Müller. Naprava je primerna za uporabo v: prezračevalnih sistemih, odpraševanju, transportu zraka v tehnoloških inštalacijah, lakirnicah, mizarstvih ter proizvodnih strojih. Ventilator je v zelo dobrem vizualnem in tehničnem stanju – robustna, težka konstrukcija. Tehnični podatki: • Proizvajalec: Elektror • Model: RD 06 • Moč motorja: 2,2 kW • Napajanje: 230 / 400 V • Obrati: cca 2870 rpm • Frekvenca: 50 Hz • Pretok zraka: cca 3600 m³/h • Tlak: cca 2550 Pa • Stopnja zaščite: IP54 Isdpjyuqrlsfx Alasat Vhod in izhod pravokotne oblike – mere so vidne na fotografijah.

Stanje: zelo dobro (rabljeno), Naprodaj profesionalna industrijska črpalka ASTRA CM 50-125A italijanske izdelave (Padova, Italy). Črpalka je v zelo dobrem vizualnem in tehničnem stanju. Robustna konstrukcija, namenjena za inštalacije, vodne sisteme ter tehnološke kroge. Trofazni motor 5,5 kW, hitrost 2800 obr/min, napajanje 400 V. Črpalka ima navojne priključke. Naprava je bila redno servisirana – ima pregledno nalepko DPT. Zelo robustna oprema – italijanska izdelava, težka litoželezna konstrukcija. Tehnični podatki: • Proizvajalec: ASTRA (Padova, Italy) Iasdpfxoyuqrfe Alaet • Model: CM 50-125A • Tip: trifazna električna črpalka • Moč motorja: 5,5 kW • Napajanje: 230 / 400 V • Hitrost: 2800 rpm • Največji pretok: 1200 l/min • Dvižna višina: 25 m • Izolacijski razred: F • Stopnja zaščite: IP55 Možna dostava ali osebni prevzem. Navedenap cena velja za 1 kos.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, število vrst polic: 10, Zaradi zaprtja našega žagarskega obrata prodajamo različne stroje in dodatno opremo (glej slike). Če vas zanima, nas prosim kontaktirajte. - Motor 45 kW za sekalnik - Dvostranska konzolna regalna polica, dolžina 15 m Iedpfx Asyi Erpjlaoat

Stanje: nepreverjeno (rabljeno), Manufacturer: Stork Capacity: 660 m³/h Iaodpfx Alem Uc R Uoast Motor: 160 kW

Stanje: zelo dobro (rabljeno), Buderus 455 kW. Olje. Rezervno ogrevanje. Nizkotemperaturni kotel, možna tudi uporaba gorilnika na bioplin. Iodpfxex U Exuo Alaoat

Leto izdelave: 1994, stanje: dober (rabljeno), Manufacturer: Boge Model: V LEX 45 Motor: 45 kW Iajdpehtq Dvsfx Alast Capacity: 6.5 m³/min

Stanje: zelo dobro (rabljeno), Naprodaj industrijski električni motor z elektromagnetno DC zavoro. Kompletna pogonska enota, uporabljena v industrijskih strojih, mostnih žerjavih, vitlih, transporterjih ter drugih napravah, kjer je potrebno zaustaviti gred po izklopu napajanja. Motor je odstranjen iz industrijskega stroja. Zunanji videz zelo dober – normalne sledi uporabe, tehnično brezhiben. Elektromagnetna zavora omogoča takojšnjo zaustavitev in blokado gredi, kar je pogosto uporabljeno v pogonih z visoko stopnjo varnosti. Tehnični podatki: proizvajalec motorja: Cantoni tip motorja: 3-fazni moč: 5,5 kW napetost: 400 V frekvenca: 50 Hz število obratov: pribl. 950 obr/min stopnja zaščite: IP55 izolacijski razred: F zavora: enosmerni tok (DC) Ijdpfoyridbjx Alaoat zavorni moment: 150 Nm napajanje zavore: 180 V / 75 W leto izdelave: 2018 proizvedeno v EU NAVEDENA CENA ZA 1 KOS.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1998, obratovalne ure: 13.929 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.400 kg, vrsta goriva: električni, volumenski pretok: 1,254 m³/h, obratovalni tlak: 8 letvica, tlak (maks.): 10 letvica, vrsta hlajenja: zrak, Screw Compressor TAMROTOR 110 kW 7.5 bar 20.9 m³/min Manufacturer: Gardner Denver TAMROTOR Model: M110/7.5 EANA Free Air Delivery: 20.9 m³/min Iaedsty Nkwepfx Alast Year of Manufacture: 1998 Operating Pressure: 7.5 bar Motor Power (ABB Motors): 110 kW Rotation Speed: 2975 rpm Electrical Supply: 50 Hz 400 V Maximum Pressure: 13.5 bar Maximum Operating Temperature: 115 °C Weight approx. 2400 kg Operating Hours: 13,929 h

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Electric motor 7.5 kW 1445 Ford Leroy Somer LS132MT for sale Serial number: ctm: 165 Ijdpfx Ajhr Uw Selajat Type: LS132MT Power: 7.5 kW Speed: 1445 rpm 400 V 50 Hz 15.40 A Shaft diameter: 34 mm double pulley Stub shaft length: 90 mm Base hole: Length: 140 mm Width: 220 mm If you need further information, we are here to help! Please contact us via the contact form or give us a call. Your listing has been automatically translated. Translation errors may be possible.

Leto izdelave: 2021, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, High-Pressure Inline Duct Fan 1000 mm, 7.5 kW Nuaire SC1000LC4KGX-0JM6, multiple units for sale Airflow: 32,000 m³/h at 420 Pa pressure Multiple high-pressure duct fans available for sale, ideal for a variety of cooling and ventilation applications. Manufacturer: NUAIRE Model: SC1000LC4KGX-0JM6 Year of manufacture: 2021 Brand new! Several units available Technical specifications: Glass-fiber reinforced polyamide blades Adjustable blade angle Diameter Ø 1000 mm Anodized aluminium motor casing Motor output 7.5 kW / 400/50 Hz / 1460 rpm, 17.76 A Minimum operating temperature -50/+60 °C (stop/start) in standard version Reinforced housing Plastic blades Outer dimensions: 1106 mm / depth 570 mm incl. motor Weight: 136 kg Ijdpfx Ajwr Ul Solaeat Would you like more information? We are happy to assist you! Contact us via the contact form or call us. Your ad was automatically translated. Translation errors are possible.

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Ijdogl Nlmjpfx Alaoat Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Iasdpfx Aled Nm Sioaet Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, Production time approx. +/- 4 months. Iaedpfx Aod Hkqholaet The ideal machine, for example, for shredding pallets and wood waste. * prepared for extraction, see pictures 4 and 5 without additional accessories such as -exhibited hopper or -conveyor belt cutout Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knives: 76 pieces, reversible multiple times Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 cbm Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard equipment includes: - V-rotor for maximum throughput - 2nd row of knives on rotor - Control cabinet with Siemens PLC control system - Automatic star/delta start - Fast hydraulic system - Automatic shutdown when rotor is idling - Rotation speed 70-90 rpm for high throughput - Cycle control to avoid idle time - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF, other materials upon testing and approval by the manufacturer. Requirements for raw material: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. Iajdodwktkopfx Alaot A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically Iajdpfxjd Nnwlj Alaot * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Stanje: novo, Leto izdelave: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (Shipping €14.90 net) *Please refer to image 2 for construction lengths The active side features a stainless steel end plate (material 1.4301). Threaded holes are provided on the reverse for mounting *Handle available on request The block magnet systems can be used up to a maximum operating temperature of +100°C. The magnet surface should be cleaned regularly of captured iron parts. Attraction heights for all types, e.g.: For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Mounting Example 1: Mounted above a conveyor belt, the iron parts "jump" onto the magnetic contact surface. Ijdpfjtqfhxsx Alajat Mounting Example 2: Installed in a pipeline system in direct contact with the material flow. For high separation security, a cascade arrangement of several block magnets in series is possible. Installation and safety instructions: When handling, even during unpacking and later mounting, ensure that no loose iron parts, such as tools or screws, are nearby. The magnetic force is so strong that painful injuries can occur if fingers get caught between iron parts and the active surface. No steel parts should be present within a minimum distance of 400 mm underneath the active surface.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology Iedpsfci D Aefx Alaeat + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special-purpose machine for plastic size reduction Base machine from €24,990 net Ideally suited for shredding: Iodpod H R Sxjfx Alaeat - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wood pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced torque loading) - Minimal cutting gap between rotor and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control: PLC Cutting chamber opening (top): 600 x 800 mm Input material should be max. approx. 500 x 500 mm (height less critical) Hydraulically operated pusher Screen perforation as desired (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage shredding system with downstream MVZ granulator (screens 5–15 mm) is recommended Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm Additional options (at extra charge): - Raise shredder by approx. 25 cm (for conveyor belt discharge preparation) + €1,980 net - Inclined conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Conveyor and overband magnet control + €2,750 net (start/stop synchronized with shredder) - Alternatively, manual start/stop on the conveyor belt + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contamination such as sand, stones, etc. result in increased wear. We are happy to offer a free test with your material at our site in Neckartailfingen. Alternatively, you can ship your material to us and we will document the testing with pictures and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic, extremely hard, or heavy plastics—this would negatively impact the system's durability. --- Optionally, larger machines are available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Input material should be max. approx. 720 x 700 mm (height less critical) From €39,995 net *Options upon request Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Input material should be max. approx. 900 x 700 mm (height less critical) From €49,975 net *Options upon request Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Input material should be max. approx. 1,200 x 700 mm (height less critical) From €79,975 net *Options upon request

Leto izdelave: 2026, stanje: novo, *Only the neodymium overband magnet is offered, not the conveyor belt underneath. Iaedpfx Asdubpuelajt *Neodymium magnets are among the strongest magnets in the world. They have extremely high holding force and cannot be compared to ferrite magnets. Extremely high separation efficiency, depending on the material height and input material. Probably the most compact overband magnet on the market. Competitors often use the less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and discharged sideways once outside the magnetic zone. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer *depending on the maximum length of the metal pieces. Ideal for separating nails from wood chips. Optionally used in a single-shaft shredder with extraction. Requirements: * Your belt width or effective inner width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material flows less than 12 mm high, as well as chip lengths less than 25 mm. ----- Optional at extra cost: Cross and incline conveyor demo units from €8,770 net

Stanje: novo, Naprodaj električni motor priznanega podjetja ATB Motorentechnik GmbH, proizveden v Nemčiji. Model CD160M-4, v protieksplozijski izvedbi ATEX II 2G, prilagojen za delo s frekvenčnim pretvornikom. Tehnični podatki: • Moč: 11 kW • Tip: CD160M-4 • Napetost: 400 V Δ / 690 V Y • Tok: 21 A / 12,1 A • Frekvenca: 50 Hz • Obrati: 1460 min⁻¹ (4-polni) • Cos φ: 0,85 • Razred izolacije: F • Stopnja zaščite: IP55 • Masa: 168 kg • Leto izdelave: 2007 • ATEX: II 2G EEx de IIC T4 – motor za območja z nevarnostjo eksplozije plina • Gred: premer 42 mm, večzarezna. Iasdpfx Asxbd U Eelajt

Stanje: novo, Leto izdelave: 2026, Premer: 160 mm Za doplačilo je možno dobiti tudi v premerih: 180, 200, 250, 300 mm; dodatni premeri na zahtevo. Iajdpfjchuvrjx Alaet Zelo robustna industrijska izvedba. Idealno za ločevanje žebljev/kovinskih delov iz materialnih tokov. Na primer za uporabo po lesnem drobilniku. Vključno s 3 izjemno zmogljivimi magneti. * Po želji je mogoče vgraditi do največ 6 magnetov v element – doplačilo za vsak dodatni magnet + 49 € - Za doplačilo so na voljo tudi neodim magneti namesto feritnih. Vaše prednosti: + Izjemno velika revizijska vrata s tesnilom za lahko odstranjevanje žebljev + Stabilno hitro zapiranje + Izdelano v Nemčiji Revizijska vrata/odprtina: 35x18 cm Vgradna dolžina je lahko različna

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, RIELLO RS70 Nov, neuporabljen, originalno zapakiran: (na voljo 2 kosa) - Moč: 192-814 kW - Leto proizvodnje: 2016 Iasdpfxewgyp Ej Alaot