Forkardt F+160 nakup rabljenega (38.312)

Stanje: dober (rabljeno), Pipe clamping system, clamps for butt welding machine, butt fusion welder, mirror welding machine, pipe welding machine, pipe assembly jig - Holder diameters: 90/105/125/160 mm - Angle: adjustable - Double clamping device: for pipe assembly - Weight: 65 kg Kdsdpfx Aob A Rkdjbxjn

Stanje: dober (rabljeno), Leto izdelave: 1986, Direct current motor, geared motor, electric motor, DC geared motor - Speed: 200/2000-3000 rpm - Power: 3.2 kW - Design: B3 - Shaft diameter: Ø 50 mm - Protection class: IP 44 - Weight: 220 kg Kodpfx Abeb A Ixajxedn

Stanje: zelo dobro (rabljeno), Grundfos TPED 50-160/2-S AFA-BAQE APPLICATION AREAS - Heating systems - Local domestic hot water supply systems - Cooling and air conditioning systems FEATURES AND BENEFITS - Low power consumption - Adjustment according to prevailing operating conditions - Easy installation Technical Data: Rotational Frequency: 2900 rpm Nominal Flow Rate: 17 m³/h Nominal Head: 12 m Maximum Hydrost. Head: 160 dm Shaft Seal: BAQE Liquids: Operating Medium: Water Fluid Temperature Range: 0 .. 120°C Medium Temperature: 20°C Density: 998.2 kg/m³ Materials: Pump Housing: Cast Iron EN-JL1040 ASTM A48-40 B Impeller: Cast Iron EN-JL1030 Kedpfofuappex Abxodn ASTM A48-30 B Electrical Data: Motor Type: 80B Number of Poles: 2 Nominal Power Output - P2: 2 x 1.1 kW Industrial Frequency: 50 Hz Nominal Voltage: 3 x 380-500 V Nominal Current: 2.15-1.80 A Power Factor (Cos φ): 0.91-0.82 Nominal Speed: 360-4000 rpm Energy Efficiency: 88.5% Protection Class (IEC 34-5): IP55 Insulation Class (IEC 85): F Motor Protection: Yes Motor Serial No.: 98362352 Installation: Maximum Ambient Temperature: 50°C Maximum Operating Pressure: 16 bar Maximum Pressure at Specified Temperature: 16 bar / 120°C Standard Flange: DIN Connection Code: F Pipe Connection: DN 50 Permitted Pressure: PN 16 Installation Length: 340 mm Motor Flange Size: FF165 Net Weight: 95 kg

Stanje: novo, Leto izdelave: 2025, High-speed tube filling machine for pastes and liquids. Typically used for cosmetics such as make-up, creams, general personal care products like shower gels, shampoos, hair gels, toothpaste, sunscreen, etc. Suitable for pre-made tubes (closed with a cap) made of plastic, aluminum, or coated composite materials. Fully automatic feeding and alignment of tubes (rotation in the holder) based on registration marks, as well as filling and sealing of tubes. Before filling, the tubes are air-flushed to prevent contamination. No-tube-no-fill function is also a standard feature. An external tube feed lift, water cooling system, batch/date printer, and dosing unit (consisting of a pneumatic piston pump and storage tank with level sensor) are included. PLC controlled, operated via touchscreen. Optional at extra cost: heated storage tank, agitator for storage tank, additional format sets (holders) for different tube diameters. Specifications: max. machine output in idle: 160 tubes/minute; filling range: 1–300 ml; accuracy: ±0.5%; tube diameter: 10–50 mm (one holder required per tube diameter); tube length: 50–240 mm; number of filling heads: 2; storage tank capacity: 70 L; all parts in contact with the product are made of 316L stainless steel; power supply: 220/380 V, power consumption: 6 kW; compressed air: 0.6 MPa; machine dimensions: L2870 x W1770 x H2340 mm. Please note that our new prices are often lower than typical used prices. Feel free to inquire and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. – All machines are available with full warranty. Kdedpev Nld Iefx Abxen

Stanje: novo, Leto izdelave: 2025, - Kapaciteta: 160 ton - Hodec cilindra: 400 mm - Delovna širina: 1000 mm - Manometer - Nujna zaustavitev - 400V Ksdpfsx Azghox Abxsdn

Stanje: rabljeno, Diosna SP 160 AF removable spiral mixer with 2 bowls, 160 kg dough capacity Temperature-controlled kneading Digital control panel Optimal for all types of dough Flour capacity: 100 kg Bowl volume: 260 liters Tool drive: 5.5 / 11 kW Bowl drive: 0.66 / 1.3 kW Kodpfxoptpxhs Abxsdn Hydraulic drive: 1.1 kW

Stanje: rabljeno, Diosna SP 160 AF mobile spiral mixer with 2 bowls, 160 kg dough capacity Kodpfjptpxlex Abxodn Digital control panel Ideally suited for all types of dough Flour processing capacity: 100 kg Bowl volume: 260 liters Tool drive: 5.5/11 kW Bowl drive: 0.66/1.3 kW Hydraulic drive: 1.1 kW

Stanje: rabljeno, Ta oglas je za 1 od skupno 5 UV svetilk Spectroline Es-160/FBE. Naprava je v popolnoma delujočem stanju in je pripravljena za takojšnjo uporabo. UV svetilka Spectroline Es-160/FBE je ročna, dolgovalovna UV svetilka, primerna za različne uporabe, kot so detekcija puščanj, utrjevanje in pregled. Ključne značilnosti in specifikacije: Cev: 6W, dolgovalovna UV-A (365 nm) Napetost: 120V/60Hz Dimenzije: 63,5 mm (višina), 3-1/4" širina x 10" dolžina x 4-1/4" višina Kdedpfx Abexxzbkoxsn Ročaj: Odstranljiv

Stanje: rabljeno, LPG Forklift, Gas-Powered Forklift STILL Type RX 70-16T Serial No. 517314G00021 Year of manufacture: 2016 Rated capacity: 1,600 kg Lift height: 4,920 mm Fork length: 1,000 mm Fork carriage width: 980 mm Overall height: 2,160 mm Overall width: 1,100 mm Overall length without forks: 2,200 mm Unladen weight: 3,040 kg - Triplex mast with full free lift 1,550 mm - Hydraulic side shift - LPG/electric drive - 4-cylinder Volkswagen LPG engine with 30 kW - Hydraulic power steering - Front work lights - Blue reversing warning light - Rear warning beacon (yellow) Kedpfoinldwjx Abxsdn - 4-wheel super elastic, solid rubber tyres front 18X7-8 SE / rear 18X7-8 SE - Battery charger for starter battery, VICTRON maintenance charger - New TÜV safety inspection UVV (additional charge EUR 150 net) Good condition

Stanje: novo, Na prodaj visokokakovostni industrijski motor Siemens SIMOTICS. Stanje: nov, neuporabljen, v originalni embalaži (skladiščena roba, lahko ima manjše sledi skladiščenja). 🔧 Tehnični podatki: Proizvajalec: Siemens Model: 1FE1093-6WU11-1BN2-Z Serijska številka: YFJ86378498 001 Tip: trifazni motor (servo / torque motor) Napetost: 425 V Tok: 43,0 A / 60,0 A Moč: 16,8 kW / 21,5 kW Nazivno število obratov: 1600 rpm Maks. število obratov: 7000 rpm Maks. navor: 165 Nm Kdsdpfx Aeyx I Slebxen Nazivni navor: 86 Nm Stopnja zaščite: IP00 Razred izolacije: 155 (F) Način delovanja: S1 Hlajenje: vodno (vodno hlajenje 8 l/min, max 25 °C) Standard: EN 60034 Temperaturni senzor: KTY84-130 📏 Konstrukcija: direktni pogon (torque motor) visoka natančnost izdelave namenjen industrijskim aplikacijam brez zobnikov 💡 Uporaba: CNC stroji gonilne osi industrijska avtomatizacija proizvodne linije 📦 Vsebina kompleta: Siemens motor originalna embalaža

Stanje: zelo dobro (rabljeno), • Model: WIDAX WULMIX-HE LINE M68 Ø160 R16 • Vpenjanje: držalo SK40 DV40A SE40 050 • Premer: Ø160 mm • Število ležišč za ploščice: veliko – poln komplet • Tip ploščic: 058 (večkratna uporaba, zamenljive) • Stanje: zelo dobro, zobje in ohišje brez poškodb, pripravljeno za delo • Ohišje iz natančno uravnoteženega jekla • Proizvajalec: WIDAX – Izdelano v Nemčiji • Idealno za CNC rezkalne stroje in obdelovalne centre z vretenom SK40 Kdjdpfsxmu A Dsx Abxsn

Stanje: zelo dobro (rabljeno), For sale: Sterling Fluid Systems ZTIC 040160 industrial pump with Siemens 3kW motor. A robust, professional unit designed for use in industrial installations, water circulation systems, and technological processes. ⚙️ Technical specifications: Pump manufacturer: Sterling Fluid Systems Model: ZTIC 040160 Type: AA ODC B2 KX Motor: Siemens IE1 Power: 3.0 kW Supply voltage: 230/400V (3~) Frequency: 50 Hz Speed: approx. 2835 rpm Protection class: IP55 Insulation class: F Connection: flanged 🛠️ Features: Centrifugal pump for water and industrial fluids Heavy-duty industrial construction Reliable Siemens motor Flange version – easy to install in system Designed for continuous operation 📦 Condition: ✔️ Used ✔️ Very good technical condition ✔️ Freshly painted ✔️ Normal signs of use visible 📌 Applications: industrial installations heating and cooling systems water circulation production plants Kdjdpfeyz Dxmox Abxen agriculture 📦 Included: pump with Siemens motor as shown in photos 🚚 Shipping: Shipping possible by courier or on pallet Personal collection also available We assist in arranging transport

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Rack connector, used Material color: light blue Total length: approx. 1,600 mm Profile dimensions: U 50 x 28 mm Number of holes: 2 pcs. Kdedpfx Ajk Uyriebxjn Hole diameter: approx. 11 mm Weight per piece: approx. 1.8 kg General information about the item: This item is only available for collection. Should transport or shipping of this item be required, additional costs will apply, which can be provided upon request depending on delivery location and scope of order.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side Kdsdpfx Abjh Ek Daoxsn - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Kjdpfx Abjmhhf Ssxjdn - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. Kdjdpfxemhh Dts Abxen The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: rabljeno, Ponujamo to rabljeno pnevmatsko-hidravlično orodje GESIPA FireFox 2 F Axial, leto izdelave neznano. Proizvajalec: Gesipa Blindniettechnik GmbH & Co. KG Tip: FireFox 2 F axial Maksimalni delovni tlak: 6,0 bar Serijska številka: Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite. Kdedozfg Suepfx Abxon

Stanje: novo, Stanje: novo Dobavni rok: približno 6 mesecev od naročila Država izvora: Tajvan Cena: 87.350 € Leasing obrok: 1.650,92 € Premer struženja nad ležiščem: 540 mm Razdalja med konicami: 1.500 mm Premer vretena: 85 mm Premer struženja nad prečnim suportom: 310 mm Širina ležišča: 350 mm Kedpszbvabofx Abxedn Priklop vretena: D1-8 Konus vretena: 1/20 MK Število stopenj vrtenja: 3 Območje vrtilne frekvence vretena: 27 - 2.250 1/min Prečni pomik: 5.000 mm/min Hitri pomik Z-os: 8.000 mm/min Obseg pomika prečnega suport: 280 mm Premer pinole konjička: 75 mm Priklop konjička: 5 MK Hod pinole konjička: 190 mm Moč motorja: 9 / 13,5 (S1 / S6 40%) kW Položajna natančnost: 0,02 mm Ponavljajoča natančnost: 0,016 mm Standard natančnosti: ISO3655 Dolžina: 3.340 mm Širina: 1.905 mm Višina: 2.235 mm Teža: 3.400 kg TRI NAČINI DELOVANJA: CNC / TEACH-IN / ROČNI CNC krmilje Siemens 828D • 12-palčni barvni zaslon • Linearna interpolacija • Krožna interpolacija • Helikalna interpolacija • Funkcija preskoka • Koordinatni sistem obdelovanca • Rotacija koordinatnega sistema • Navojno rezanje brez kompenzacijskega vpenjala (rigid tapping) • Zrcaljenje, skaliranje in rotacija • Cikel struženja • ShopTurn programska oprema Velika vretena odprtina z natančnimi ležaji za visoko natančnost in trajno stabilnost rezanja. Natančna kroglična vretena Ø 40 mm (razred C5) na Z-osi in Ø 25 mm (razred C3) na X-osi. 2-osni AC servomotorji Luneta 50–300 mm, valjčni tip. Ročno podajanje pinole konjička, premer 75 mm (MK5), hod 190 mm. Programske in uporabniške instrukcije. Elektronski ročni volan za X in Z os Ročni 4-pozicijski nosilec orodja (25 x 25 mm) Avtomatski sistem mazanja Popolnoma zaprt zaščitni pokrov z drsnimi vrati in oknom Posoda za ostružke s hladilnim rezervoarjem Izmeritveno poročilo LED delovna svetilka Hladilni sistem Priprava za oljni hladilni sistem OPCIJE (cene na zahtevo): Fagor krmilnik namesto Siemens Ročno ali hidravlično vpenjalo 8-pozicijski revolver, opcijsko z gnanimi orodji električno vrtljiv 4-pozicijski nosilec orodja Transporter ostružkov Visokotlačna hladilna črpalka druge opcije na zahtevo ALTERNATIVA: Varijanta FCL-2140 s 1.000 mm razdaljo med konicami Varijanta FCL-2180 s 2.000 mm razdaljo med konicami

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta prenosa: samodejen, vrsta goriva: dizel, obratovalna teža: 7.500 kg, konfiguracija osi: 4x2, prva registracija: 10/1977, Leto izdelave: 1977, Oprema: hidravlika, Technically in good condition Kodpfx Ajt S Idrobxjdn

Stanje: novo, Condition: New Delivery time: Approx. 12–14 weeks from order Country of origin: Turkey Price: €76,820 Leasing rate: €1,451.90 Pressing force: 160 tons Bending length: 4,050 mm Axes: Y1 / Y2 and X axis Stroke: 200 mm Distance between uprights: 3,600 mm Throat depth: 300 mm (side frame) Installation height: 430 mm Drive concept: Hydraulic Rapid traverse speed Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge travel X-axis: 620 mm Backgauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Motor power: 15 kW Length: 4,850 mm Width: 1,900 mm Height: 2,610 mm Weight: 10,500 kg 3 axes (Y1, Y2 and X axis) CNC CONTROL DT-10: - 10" 2D graphical display Kodpfowird Hjx Abxsdn - Intuitive touch-screen operation (easy drawing of the bending contour by finger) - User-friendly dialogue-based programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet metal blank - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software allows programs to be written on a PC and then transferred to the machine by USB CNC-controlled backgauge with linear guides and ball screw spindles CNC-controlled crowning Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Fiessler AKAS laser safety device mounted on upper beam Sheet support arms Side and rear safety guards Equipment compliant with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to serial production of standardized models without any compromise on quality and accuracy OPTIONAL: CNC-controlled R-axis (X adjustment range = 500 mm) DBend, 3D CAD/CAM import and simulation software (supports step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Stanje: zelo dobro (rabljeno), For sale: a robust bookbinding press from the renowned Swiss manufacturer Jos. Hunkeler AG, model FNP, equipped with a Mecman pneumatic cylinder Ø160 mm, stroke 50 mm, working pressure up to 8 bar. • Country of manufacture: Switzerland – premium build quality • Cylinder: MECMAN (Sweden), Ø160 mm, 50 mm stroke, max. 8 bar • Flat working plate, ideal for bookbinding, gluing, and laminating tasks • Stable, heavy-duty construction mounted on castors • Integrated pressure gauge for precise pressure control • Lower cabinet with control panel and pneumatic power supply • Serial number: 13109 Ksdpjud Avrsfx Abxsdn The machine operates flawlessly and is excellent for production, manual pressing of covers, or stationery components. Visual and technical condition – very good. Ready for operation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, FLUIDPROGRESS mobile hydraulic power unit 1.6 dm³/min 160 bar Type: 25TE1.6 160/JD 24V Year of manufacture: approx. 1995 Nominal operating pressure: 120 bar Three-piece system. Max. operating pressure: 160 bar Flow rate: approx. 1.6 dm³/min. Tank capacity: 200 liters Motor power: 0.75 kW Power supply: 380 Volt, 50 Hz Kedpfx Abji Dnpxjxsdn ATOS electric hydraulic valve, ORSTA hydraulics Space requirements (L x W x H): 1020 mm x 610 mm x 1000 mm Net weight: approx. 250 kg If you need further information, we are here to help! Please contact us via the contact form or give us a call. Your listing has been automatically translated. Translation errors are possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), vhodna napetost: 200 V, stiskalna sila: 160 t, dolžina mize: 600 mm, skupna masa: 19.000 kg, prebijalna sila: 160 t, vrsta nastavitve višine: električni, vgradna višina: 1.900 mm, nastavitev hidravličnega cilindra: 100 mm, nastavitev hoda: 130 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Manufacturer: AIDA Model: NC2-160 Pressing force: 160 t Year of manufacture: approx. 1991 Stroke length: 130 mm Kedpfx Absu D Dhxoxodn Shut height (adjustable): 285–335 mm Table dimensions: 1900 x 600 mm Ram dimensions: 1360 x 585 mm Electrical rating: 3x200V (!!), 15 kW – Japanese standard Net weight: 19,000 kg Dimensions: 2140 x 2210 x 3175 mm Automatic lubrication system. Optionally available with decoiler and straightening machine.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Sušilna peč, kalilna peč Caltherm Naprodaj je večnamenska konvekcijska peč CALTHERM z mešanjem zraka za toplotno obdelavo v odličnem stanju. Električno ogrevana enokomorna peč z mešanjem zraka Maks. temperatura: 150 °C Notranje mere: Dolžina: 200 cm Višina: 200 cm Ksdpfxovpagde Abxodn Širina: 100 cm 8 elektronskih grelnih vlaken Ventilator za kroženje zraka: 4 kW, 380 V, 50 Hz Temperaturno območje: 50-200 stopinj Celzija Zunanje mere:

Leto izdelave: 2007, stanje: kot nova (razstavni stroj), The new industrial gas burner Cuenod C 120/160 GX507 is for sale. Performance control is seamless in two stages; modulating operation. Used fuel gas: G20 Maximum output: 1600 kW Minimum output: 230 kW Burner diameter: 227 mm Dungs mb-vef 407 b01 s30 combustion controller Fan motor power: 2.4 kW Ksdpfx Asd Aqqzebxedn Voltage: 230/400V 2kW 50Hz IP47 GAS pressure: min 20 mbar / max 360 mbar Weight: 109 kg Year of manufacture: 2007 The CUENOD gas burner is designed with innovative technology for a stable gas-air mixture and low emissions. • The specially engineered head limits nitrogen oxides to below 80 mg/kWh. • Very low noise level (enclosed ventilation system). • Ventilation with RHP® system for optimized combustion process. • Cubic design with transverse fan. • Shunt for ionization current measurement. • AGP® system ensures an optimal air-gas ratio, monitored CO₂ output during operation, and precise regulation of excess air flow for condensing boilers operating at maximum efficiency. Net price applies to EU commercial customers. If you require further information, please let us know! Contact us via the contact form or call us. Your advertisement was automatically translated. Translation errors are possible.