Tisk delavnice

HIDROFAST HF-AP 160

Stanje: generalkompletno obnovljen (rabljeno), Druck: 150 t Hubweg: 140 mm Giodpfxjgd H Tpo Agwep Tischgröße: 510 x 530 mm

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 16,92 kW (23,00 KM), vrsta goriva: bencin, vrsta prenosa: hidrostat, Leto izdelave: 2024, obratovalne ure: 75 h, Agria 5900 Taifun Professional Hydrostatic Implement Carrier Technical Specifications: - Kawasaki 2-cylinder, 4-stroke petrol engine, 23 HP, with electric start - Transmission: Infinitely variable hydrostatic drive with single-plate dry clutch - Speeds: Forward: 0–7 km/h, Reverse: 0–3.6 km/h - Handlebar: Rubber-mounted, tool-free adjustment for height and lateral position - Steering: Power steering (Handlebar-Active Steering) - Tyres: 23 x 8.50 - 12 AS - Standard equipment includes: tyres, service and parking brake, hour meter, manual and electric starter, power socket - Fuel: Unleaded petrol - Weight: approx. 221 kg Features: - Intuitive steering with minimal effort thanks to Handlebar-Active Steering - Patented easy-control operating unit for intuitive command - Powerful professional-grade engines guarantee ample power for all attachments - Portal axle for shifting the centre of gravity based on local site conditions and attachment used - High visibility even in poor lighting, thanks to LED safety lights - Standard support leg enables the machine to be parked comfortably without an attachment - Hydraulic safety valve for secure hold even on steep slopes - Optimised air intake reduces ingress of dirt and dust - Central parking brake - Infinitely variable hydrostatic drive enables optimal adaptation of working speed - Robust and low-maintenance construction for continuous use under toughest conditions - Hour meter as standard - Agria attachment flange for positive, secure connection between base unit and attachment - Robust engine options ensure efficient work, even with professional attachments - Freewheeling function allows easy machine movement without engine running Possible Attachments: Godpfx Asv Ecdkegwoip - Turf maintenance: mowing, mulching, baling, band rake - Soil preparation: reverse rotary tillers, harrows - Grounds and path maintenance: weed removal, snowploughing, snow blowing, sand/salt spreading, sweeping - Woodland maintenance: brushwood chipping This Agria 5900 Cyclone Hydro implement carrier was built in 2024, has approx. 75 operating hours, and has been used as a demonstration unit only. The Cyclone is in like-new overall condition, with only minor signs of use and is immediately ready for operation. Sale occurs as a used machine under exclusion of return, warranty, and guarantee. Net price €18,479 // Gross price €21,990 - Viewing / test drive welcome - Nationwide shipping via freight forwarder: €180 - Financing / leasing can be tailored to your needs!

Stanje: zelo dobro (rabljeno), Ansemi parallel lathe, model Mono FAP 325 ES, center distance 1500 mm, center height 325 mm, spindle bore 65 mm, motor power 18 kW, overall dimensions (mm): 3300x1200x1700 h, weight 3260 kg Gisdswcd Hmspfx Agwjp

Stanje: novo, stiskalna sila: 100 t, hod: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm - Movable cylinder - Electrically or manually operated - Pressure gauge Gijdpfx Aegp Dc Rsgwjp - Emergency stop - 400V

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice • Coolant system Gjdped Du T Iefx Agwoip • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 331/43, Drilling capacity: 3 mm Throat depth: 100 mm Spindle speeds: 6300 and 9000 rpm Drive motor: 380 V, 0.18 kW Dimensions (L x W x H): 470 x 250 x 520 mm Gedpfx Asfnbgqsgwsip Weight: 39 kg

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-KBK1, DEMAG KBK overhead crane system, crane runway dimensions approx. 12m x 3.5m Other dimensions available upon request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical specifications of the system: Crane runway made of Demag KBK1 rails System will be delivered complete: Gisdpjpiarnjfx Agwjp KBK rails, rail connectors, trolleys, end plates, cable festoon system, power supply, brackets/suspenders, etc. Incl. 1 bridge with 125 kg Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with load capacities from 125 kg to 1600 kg are also available. Please enquire about your crane runway with required cantilever load and dimensions.

Stanje: novo, Delivery pressure: 11 bar Suction capacity: 480 cm³ Giedpovkizgofx Agwjp Volumetric flow rate: 360 (unit missing – please specify, e.g., l/min) Tank capacity: 270 l / bar Number of cylinders: 1 pc. Motor: 400 Volt / 3.0 kW Speed: 892 rpm Machine weight: approx. 200 kg Dimensions (L x W x H): 1.6 x 0.7 x 1.2 m

Stanje: novo, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1,200 kg Dimensions (LxWxH): Length 2,400 mm, Width/Depth 2,160 mm, Height 2,300 mm Spindle speed: 60–4,200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High rotational accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill - Stepless speed control - Forward/reverse operation for thread cutting - X and Z axes with adjustable 55° dovetail guideways - Y-axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step (0.04 – 0.15 mm/rev) - Motorized feed in X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant groove - Centralized lubrication - Height-adjustable safety shield with microswitch for optimal operator protection from flying chips and parts - Robust and large cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel distance: X / Y / Z axis 740 mm / 330 mm / 320 mm Giedpfxsd H Hhzs Agwsp Dimensions and weights Length: 2,400 mm Width/Depth: 2,160 mm Height: 2,300 mm Weight: 1,200 kg Drilling and milling capacity Max. face mill diameter: 76 mm Max. shank cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Horizontal table Length: 254 mm Width: 1,370 mm Max. vertical spindle-table distance: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0–420 mm Coolant system Coolant pump drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical spindle Overhang: 0–420 mm Spindle mount: ISO 40 DIN 2080 Speed range: 60–4,200 rpm Number of speed ranges: 2 Speed regulation control: mechanically stepless Swivel range milling head X-Y plane: 90° Swivel range milling head Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head travel Z-axis: 470 mm VPE: 1

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), Used RENNER REKO 550/50VE Air Compressor 10 bar with Petrol Engine For use without a power supply (e.g. breakdown service vehicles or mobile tyre service) The compressor is used, built in 2017, and has 50 operating hours. The petrol-driven, robust piston compressors offer you not only the usual advantages of RENNER systems but also, above all, flexibly available compressed air on construction sites, in service vehicles, and for many other applications "without a power socket". They guarantee a reliable compressed air supply independent of location. The small version is mobile and can be repositioned quickly thanks to the ergonomic handle, while the larger variant, with its compact design, can easily be moved with a pallet truck or forklift and loaded onto vehicles. VE = Electric Start. Please note: supplied without battery. Godpfxsd H Dr Sj Agwjip Technical data: Intake capacity: 550 l/min Effective output: 400 l/min Petrol engine: 3.6 kW Honda unit with 4.8 HP Max. pressure: 10 bar Cylinders/stages: 2/1 Speed: 1,400 rpm Sound level: 98 dB(A) Air receiver: 50 l Dimensions (L x W x H): 810 x 460 x 830 mm Weight: 70 kg Visit our store in Erlangen. We have a large selection of new and used compressors.