Cormak Tytan 330L nakup rabljenega (527)

Stanje: novo, Leto izdelave: 2026, Trakovna brusilka za kovino CORMAK STU75 je industrijska trakovna brusilka, zasnovana za širok spekter brusilnih opravil – od ravnih površin, prek robov, do cilindričnih delov, kot so cevi. Zahvaljujoč močnemu motorju, dvostopenjski hitrosti traku in premišljeni konstrukciji, stacionarna brusilka STU75 zagotavlja učinkovitost, natančnost in zanesljivost pri vsakodnevni uporabi. Glavne prednosti stroja: * Nastavljiva hitrost traku 14,5 / 29 m/s – omogoča prilagoditev hitrosti brušenja vrsti materiala in želeni kvaliteti obdelave. * Hitra menjava traku in brusilnih orodij – skrajša čas priprave in poveča operativno učinkovitost delovnega mesta. * Glava z možnostjo nastavitve v navpični in vodoravni položaj – zagotavlja prilagodljivost in omogoča obdelavo različnih delov pod optimalnim kotom. * Spona za cevi z nastavljivim kotom 0–30° – omogoča natančno brušenje cilindričnih elementov pod kotom, na primer pri pripravi za varjenje. * Komplet valjev za cevi različnih premerov – omogoča hitro konfiguracijo za brušenje cevi s premerom do 60,3 mm. * Robustna konstrukcija, ki duši vibracije – poveča natančnost dela in udobje uporabnika. Konstrukcija in tehnologija: Trakovna brusilka CORMAK STU75 je zasnovana za večnamensko delo v zahtevnih industrijskih pogojih. Opremljena je z gumiranim kolesom s premerom Ø200 mm in drsnim nosilcem z valji 120 × 90 mm, kar omogoča učinkovito vodjenje traku in enakomerno pritiskanje na obdelovanci. Integrirana konstrukcija z vodilnim sistemom valjev in vzmetnim sistemom napenjanja zagotavlja varno in gladko delovanje brusilnega traku. Natančnost in učinkovitost: Kombinacija širokega traku 75 × 2000 mm z možnostjo gladkega prehoda med nizko in visoko hitrostjo brušenja zagotavlja učinkovitost tako pri grobi obdelavi kot pri končni obdelavi površine. Uporabljena kotna spona in komplet valjev omogočajo natančno brušenje cevi, hkrati pa zagotavljajo ponovljivost in stabilnost nastavitev. Uporaba: Univerzalna trakovna brusilka za kovino CORMAK STU75 se uporablja v: * proizvodnji ograj, balustrad in konstrukcij iz jeklenih cevi, * obdelavi robov in ravnih površin pred varjenjem ali barvanjem, * tesarskih, orodjarskih in industrijskih servisnih delavnicah, * malih in srednjih proizvodnih linijah. Standardna oprema: * Gumirano kolo Ø200 mm * Drsni nosilec z valji 120 × 90 mm * Spona za brušenje cevi z nastavitvijo 0–30° * Komplet valjev: 20, 21,3, 26,9, 33,7, 42,4, 48,3, 60,3 mm * Brušilni trak 75 × 2000 mm Tehnični podatki: Hitrost traku: 14,5 / 29 m/s Njdpfx Anovu Ukzopslh Dimenzije brusilnega traku: 75 × 2000 mm Napajanje: 400 V Moč motorja: 2,2 kW Teža: 110 kg Največji premer brušene cevi: 60,3 mm

Stanje: novo, Leto izdelave: 2026, Električni navojni stroj CORMAK RGE16PW je napredna naprava, namenjena navajanju navojev v širokem spektru materialov, kar omogoča njegovo uporabo v industriji in obrtnih delavnicah. Zahvaljujoč inovativni tehnologiji in konstrukciji, stroj CORMAK RGE16PW bistveno skrajša čas navajanja navojev, zagotavlja večjo učinkovitost in natančnost, kar ga naredi nepogrešljivo orodje v vsakem proizvodnem obratu. To je naprava, ki združuje hitrost, natančnost in zanesljivost, kar omogoča enostavno izdelavo navojev pod različnimi koti in z popolnim nadzorom nad parametri procesa. Glavne prednosti električnega navojnega stroja CORMAK RGE16PW * Natančno navajanje: Zahvaljujoč uporabi servomotorja in natančno programiranega sistema nadzora, stroj zagotavlja odlično kakovost izdelanih navojev z idealnim kotom 90°. * Fleksibilnost: Možnost navajanja v različnih materialih, kot so jeklo, nerjavno jeklo, aluminij in barvne kovine, omogoča široko uporabo v različnih industrijskih panogah. * Intuitivno upravljanje: Na dotik občutljiv upravljalni plošči, ki je na voljo v poljskem in angleškem jeziku, omogoča enostavno programiranje delovnih parametrov, kot so hitrost vrtenja, smer navajanja in globina navoja. * Napreden sistem hlajenja: Integriran sistem mikro razprševanja hladilnega sredstva zagotavlja optimalno hlajenje, kar zmanjšuje porabo maziva in podaljšuje življenjsko dobo orodij. * Vsestranskost uporabe: Možnost navajanja pod različnimi koti zahvaljujoč vrtljivemu ročnemu mehanizmu, kar omogoča širok spekter aplikacij v serijski in enojni proizvodnji. Konstrukcija in tehnologija Navojni stroj CORMAK RGE16PW je zasnovan za intenzivno delo v zahtevnih industrijskih pogojih. Njegova konstrukcija je zasnovana na trdnih, natančnih komponentah, ki zagotavljajo dolgotrajno in zanesljivo delovanje. Osrednji element stroja je navojni ročni mehanizem, opremljen z hitro sponko, ki omogoča enostavno in hitro zamenjavo navojnih orodij. To uporabniku omogoča hitrejšo preklapljanje med različnimi navojnimi orodji, kar poveča učinkovitost dela. Navojni ročni mehanizem je priključen na servomotor z visokim navorom, ki omogoča natančno navajanje navojev. Uporaba vrtljivega ročnega mehanizma zagotavlja fleksibilnost, kar omogoča navajanje pod poljubnim kotom, zaradi česar je naprava vsestransko orodje v različnih panogah. Standardna oprema navojnega stroja CORMAK RGE16PW * Na dotik občutljiv upravljalni plošči: Omogoča enostavno programiranje parametrov navajanja, kot so hitrost vrtenja, smer navajanja in globina navoja. * Vrtljivi navojni ročni mehanizem: Omogoča navajanje navojev pod poljubnim kotom. * Nastavki za navojna orodja s preobremenitvenimi spojkami: Zagotavljajo zaščito naprave pred preveliko obremenitvijo, kar zagotavlja njeno dolgotrajno trajnost. * Sistem mikro razprševanja: Stalno hlajenje orodij pri minimalni porabi hladilnega sredstva. * Izpihovalnik sekancev: Omogoča odstranjevanje sekancev, kar izboljša vidljivost med navajanjem. Tehnični parametri navojnega stroja CORMAK RGE16PW Moč 0,6 kW Napajanje 230 V Teža 30 kg Maks. doseg ročnega mehanizma 1080 mm Maks. hitrost vrtenja 375 vrt/min V paketu: Nastavki za navojna orodja M3, M4, M5-6, M8, M10, M12, M14, M16 Nodpfx Aevvlkzonpslh *Stroj se prodaja brez delovne mize, primeža in navojnih orodij.

Stanje: novo, Leto izdelave: 2026, CNC Routing Plotters C6090 are professional, high-precision machines designed for processing small-format materials such as wood, chipboard, plywood, MDF, OSB, as well as plastics like PVC, plexiglass, dibond, and light metals. Training at CORMAK’s headquarters is included in the price of each machine. Optionally available: the latest UCanCAM V13 software in the Polish language version. Drive The machines employ high-power motors ensuring optimal acceleration and speeds in all axes. High-quality rack and pinion drives, praised by users, are used in the X and Y axes for enhanced durability and precision. The Z axis is powered by a high-quality ball screw drive. Nedpfxswcd Tme Anpjlh All axes move on linear rail guides. The machine is equipped with a drive height sensor. Spindle High-class brushless spindle, known for its durability. Features a liquid cooling system. Equipped with high-quality machine bearings for very quiet operation and longer service life. Tool height measurement sensor included. Spindle speed range: 6000 to 24000 rpm. Software OPTIONALLY: The latest UCanCAM V13 software, Polish language version (supports import from Corel, AutoCAD, etc. Import/export of files, editor, text input, and many other functions). The software allows fast and easy design of elements, which are then converted to G-code. Import of ready-made files from other programs is also possible. The machine features a last G-code path memory function (in the event of a failure or power interruption, operation resumes from the last point, minimizing downtime and material loss). DSP Control Digital Signal Processing (DSP) The machine’s DSP controller features its own processor and operating memory for reliable operation and user-friendly handling. The controller ensures smooth machine performance and high processing accuracy. In case of power loss, there is no need to restart the program from scratch. Built-in controller memory allows the machine to operate without reloading the program each time. Technical Specifications Spindle: 2.2 kW / 3.0 kW / S1/S6, 24,000 rpm, inverter drive Working area: 600 x 900 x 300 mm Control: DSP Software resolution: 0.001 mm Power supply: 230V Weight: 310 kg Machine dimensions (W x L x H): 1370 x 1720 x 2050 mm Table height: 750 mm Guides: Linear Drive transmission: Rack and pinion (Z axis: Ball screw) Axis drives: Stepper motors Software: UCanCAM V13 Polish version (option) Standard Equipment • Leveling feet • Screws • Wrenches • Training cutter set • ER32 collets – 1/8 inch, 1/2 inch, and 5–6 mm Machine unloading and placement at the client’s site. Power plug installation is the client’s responsibility due to varying 16A/32A sockets. Price is for the machine only.

Stanje: novo, Leto izdelave: 2026, The CORMAK BS370SA model is a modern automatic band saw designed for efficient serial cutting of pipes, profiles, and solid workpieces of various geometries. Its robust construction, fully automated processes, and high cutting accuracy make this machine perfectly suited for production plants, tool shops, and metalworking companies where repeatability and reliability are paramount. Main machine advantages - Automatic cutting cycle: clamping, material feeding, cutting, and arm return are all executed without operator intervention. - Miter cutting in the full work range – up to 45° left and 60° right. - Inverter-controlled stepless band speed adjustment from 5 to 90 m/min. - Hydraulic arm and vise control – ensures precision and ease of operation. - Material feeding system equipped with a 2450 mm roller conveyor, 370 mm feed per cycle, and ±0.2 mm accuracy. - Operator panel with controller: programmable cutting parameters, piece counter, and error signalling. Construction and technology The CORMAK BS370SA band saw is built on a rigid welded frame, guaranteeing operational stability and minimized vibration. Its hydraulic feed and clamping system, precision band guides, and stepless speed adjustment all ensure high-quality and safe operation. The machine features a roller conveyor to facilitate automatic material feeding. Precision and performance Thanks to high-quality components and advanced technical solutions, the CORMAK BS370SA band saw delivers repeatable and precise cuts. The adjustable cutting speed and hydraulic band tensioning guarantee long tool life and complete process control. Applications Recommended for serial production, processing of steel, aluminium, and non-ferrous metal components. Particularly suitable as a band saw for pipes, profiles, and solid parts in steel construction, prefabrication, and precision manufacturing sectors. Standard equipment - Control console on a separate pedestal - Hydraulic vise and arm control - Roller conveyor for automatic material feeding - Arm position memory - Band cleaning brush - Coolant system with pump - Bi-metal band saw blade - CE declaration of conformity and user manual (DTR) Nodoxiv Hcopfx Anpjlh Technical specifications Motor power: 1.5 kW (400 V) Hydraulic motor power: 0.75 kW (400 V) Blade dimensions: 3160 x 27 x 0.9 mm Cutting speed (stepless): 5–90 m/min Saw arm swivel angle: up to 60° Workpiece cross section at 90°: ● 270 mm, ■ 260 mm, ▅ 370 x 220 mm Workpiece cross section at 45°: ● 240 mm, ■ 180 x 180 mm, ▅ 240 x 160 mm Workpiece cross section at 60°: ● 160 mm, ■ 100 x 100 mm Machine length: 3970 mm Machine width: 1850 mm Machine height: 1763 mm Net weight: 770 kg Gross weight: 925 kg The machine is equipped with an additional roller conveyor Length: 2450 mm

Stanje: novo, Leto izdelave: 2026, Polavtomatska tračna žaga za kovino CORMAK BS370H CORMAK BS370H je robustna polavtomatska tračna žaga, namenjena natančnemu rezanju cevi, profilov in polnih materialov. Nova različica je opremljena z zgornjim pritiskačem za paketno rezanje in zvezno nastavitvijo hitrosti traku preko frekvenčnega pretvornika v območju 20–90 m/min. Ti rešitvi povečujeta zmogljivosti stroja in omogočata enostavno prilagajanje delovnih parametrov glede na vrsto obdelovanega materiala. Pritiskač stabilizira večplastno zložene elemente in zmanjšuje njihovo premikanje med delom. Omogoča bolj učinkovito rezanje paketov profilov, cevi ter drugih ponavljajočih se elementov. Glavne prednosti: - Zgornji pritiskač materiala – stabilno in učinkovito paketno rezanje. - Zvezna nastavitev hitrosti 20–90 m/min – izbira hitrosti traku preko frekvenčnega pretvornika. - Polavtomatsko delovanje – hidravlično vpenjanje materiala, spuščanje in dvigovanje žaginega loka. - Poševno rezanje od -45° do +60° – širok nabor možnih del. - Hidravlično vodeno primež – hitro in ponovljivo vpenjanje materiala. - Brezstopenjska nastavitev spuščanja roke – večja kontrola nad potekom reza. - Vodila s karbidnimi ploščicami in ležaji – natančno vodenje traku. - Hlajenje z zaprtim krogom – hlajenje območja reza in odvajanje toplote. - Senzor napetosti traku – enostaven nadzor pravilne napetosti žaginega lista. - Samodejni izklop ob pretrganju traku – dodatna zaščita stroja. Uporabljeni zgornji pritiskač omogoča stabilizacijo več elementov, zloženih eden na drugega. To je posebej uporabno pri serijskem rezanju profilov, cevi in drugih materialov s ponavljajočimi se dimenzijami. Material je pritrjen tako s primežem kot tudi zgoraj, kar preprečuje premike in dvigovanje posameznih delov paketa med prehodom traku. Hitrost traku je mogoče zvezno prilagajati v območju od 20 do 90 m/min. Frekvenčni pretvornik omogoča prilagoditev delovnih parametrov glede na vrsto materiala, njegov prerez ter značaj reza. Polavtomatski delovni cikel: Nlodpfx Ansycqhcjpeh Po nastavitvi materiala in zagonu cikla stroj samodejno izvaja naslednje faze rezanja: - hidravlični primež vpne material, - žagin lok se spusti z nastavljeno hitrostjo, - trak izvede rez, - končna stikala zaznajo konec cikla, - žagin lok se hidravlično dvigne na izhodiščni položaj. Ravno in poševno rezanje: Zasuk žaginega loka omogoča izvajanje rezov v območju od -45° do +60°. Material ostane v enem položaju, upravljavec pa nastavi ustrezni kot žaginega loka. Največji premer reza pri 90°: Ø270 mm Največji kvadratni prerez pri 90°: 220 × 220 mm Največji pravokotni prerez pri 90°: 370 × 220 mm Tehnični podatki: Model: CORMAK BS370H Način delovanja: polavtomatski Območje poševnega rezanja: od -45° do +60° Hitrost traku: zvezno nastavljiva 20–90 m/min Nastavitev hitrosti traku: frekvenčni pretvornik Zgornji pritiskač materiala: da – za paketno rezanje Velikost žaginega traku: 3160 × 27 × 0,9 mm Napetost traku: mehanska, ročna Nastavitev spuščanja roke: brezstopenjska – hidravlični cilinder Vodenje primeža: hidravlično Višina osnove primeža: 890 mm Napajanje: 400 V / 3 faze Skupna moč: 1,5 kW Moč črpalke za hladilo: 46 W Dimenzije z osnovo: 1850 × 950 × 1500 mm Masa: 491 kg

Stanje: novo, Leto izdelave: 2026, The WP200 self-centring three-jaw chuck is a professional accessory designed for use with welding positioners and welding rotators, such as the PS310 and PS320 models. Its precise clamping mechanism enables quick, stable, and concentric securing of pipes and workpieces with cylindrical or hexagonal cross-sections, significantly improving the efficiency and safety of circumferential welding processes. Key features of the WP200 chuck: - Self-centring three-jaw mechanism – ensures uniform and stable clamping of components regardless of their shape. - Versatility – compatible with most welding rotators and welding positioners, including CORMAK PS310 and PS320. - Precise fastening – perfect adaptation to the workpiece translates to higher weld quality and stable rotation. - Durable construction – robust, compact body made from durable materials resistant to high mechanical and thermal loads. - Compact dimensions and easy installation – low weight and accurately spaced mounting holes allow for quick integration with welding equipment. Design and technology Nlsdoycqnvepfx Anpsh The WP200 chuck features three high-quality jaws designed for quick and automatic centring of the workpiece along the axis of rotation. The external diameter of 200 mm and internal diameter of 80 mm allow for clamping workpieces up to 170 mm in diameter. The body is made of high-grade steel, ensuring resistance to deformation during prolonged use. Precision and performance The self-centring three-jaw mechanism of the WP200 chuck significantly reduces set-up time. Minimised play and elimination of positioning errors directly contribute to improved quality of circumferential welds. Stable clamping also provides increased operator safety. Application The WP200 chuck is intended for use with welding rotators, welding positioners, and rotary tables in the welding of pipes, flanges, rings, and cylindrical components. It is ideally suited for welding workshops, production facilities, and the structural steel industry. Technical data Max. pipe diameter: 170 mm External diameter: 200 mm Internal diameter: 80 mm Mounting hole spacing: 85 mm Screw hole diameter: 9 mm For welding positioners: PS310, PS320 Weight: 10 kg

Stanje: novo, Leto izdelave: 2026, The WP300 self-centering three-jaw chuck is a specialized accessory designed for securing pipes and cylindrical or hexagonal workpieces in welding positioners and welding rotators. With its precise, self-centering clamping mechanism, it ensures reliable and accurate positioning of the workpiece during rotation, resulting in higher quality and repeatability in the welding process. Nodpfoycqptox Anpjlh Key advantages of the WP300 chuck - Precise self-centering mechanism – enables quick and accurate centering of pipes and workpieces, eliminating the need for manual positioning. - High versatility – compatible with a wide range of welding rotators and positioners, including PS310, PS320, and PS360 models. - Clamping stability – thanks to three independent jaws, the workpiece remains securely fixed even at high rotational speeds. - Robust construction – manufactured from high-grade materials resistant to vibrations, loads, and harsh welding environments. - Optimal working diameter – capable of clamping pipes up to 270 mm in diameter, offering a broad application range. Construction and technology The WP300 model features a compact and durable steel construction suitable for intensive use. The three-jaw mechanism operates synchronously, automatically aligning the workpiece with the axis of rotation. The large external diameter (300 mm) and through-hole (100 mm) make it suitable for handling a wide range of component sizes. The mounting holes are designed to ensure full compatibility with CORMAK welding positioners. Precision and operational efficiency The WP300 chuck delivers high clamping repeatability, translating into precise circumferential welds. It shortens workpiece preparation time and reduces setup errors, increasing production efficiency and improving operator safety. The sturdy build guarantees stable performance, even with dynamic loads. Applications The WP300 chuck is intended for use in circumferential welding processes, particularly in manufacturing plants, metalworking workshops, and companies specializing in steel element prefabrication. It is suitable for welding rotators and welding positioners, enhancing their functionality and versatility. Technical specifications - Maximum pipe diameter: 270 mm - External diameter: 300 mm - Internal diameter: 100 mm - Mounting hole spacing: 105 mm - Mounting hole diameter: 9 mm - Compatible with welding positioners: PS310, PS320, PS360 - Weight: 14 kg

Stanje: novo, Leto izdelave: 2026, Nosilec adapter MK4 s kompletom 8 vpenjalnih tulec (Ø 4-16 mm) je natančno orodje, namenjeno pritrjevanju ER orodij različnih premerov. Opremljen je z Morsejevim vpetjem MK4 in montažnim vijakom M14, kar zagotavlja trdno namestitev v vreteno stroja. Set je dostavljen z ključem za matico nosilca in praktičnim transportnim kovčkom, kar povečuje njegovo funkcionalnost in udobje uporabe. Nledoycqr Ujpfx Anpoh Vpenjalni nosilec z matico za ER tulec: - Vpetje na Morse MK4 - Montažni vijak skoznji M14 ER vpenjalne tulec: - Dolžina tulca 45 mm - Premer tulca 24 mm Tulece v razponu od 4 do 16 mm: - 4 - 5 - 6 - 8 - 10 - 12 - 14 - 16 Set vsebuje: - Nosilec za vpenjalne tulec MK4/M14 - 8 vpenjalnih tulec - Ključ za matico nosilca - Transportni kovček za set (pridržujemo si pravico, da je kovček PVC ali lesena škatla, odvisno od dobave)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, The high-performance CBN borazon grinding wheel designed for the CORMAK DG20 drill sharpener is a key component that ensures precise sharpening of HSS and cobalt steel drills. It offers unmatched durability and accuracy, essential for daily use in toolrooms, mechanical workshops, or maintenance departments. Main advantages of the DG20 grinding wheel: - High hardness and thermal resistance thanks to CBN (borazon) abrasive material. - Compatibility with the CORMAK DG20 sharpener – the wheel is designed specifically for this model to ensure perfect fit and maximum efficiency. - Vibration-free operation due to precise balancing – reduces the risk of tool damage and improves user comfort. - Long service life – significant reduction in the frequency of wheel replacement and lower operating costs. - Stable geometry – no frequent reshaping required, ensuring consistently high sharpening quality. Design and technology The grinding wheel for the CORMAK DG20 drill sharpener is manufactured using CBN technology – borazon is one of the hardest known abrasive materials, making it perfect for processing high-speed steel tools. Its precise manufacturing and optimized shape guarantee high sharpening efficiency while minimizing tool material loss. Precision and performance Nsdsycq Hropfx Anpjlh Using an original CBN wheel in the CORMAK DG20 model delivers excellent results, even during extended operation. The wheel enables maintenance of the exact point angle (in the range of 90–135°), directly affecting cutting quality, reducing cutting forces, and prolonging the lifespan of sharpened drills. Its vibration-dampening properties limit the risk of micro-chipping on cutting edges. Choose quality – select the original DG20 grinding wheel The CBN wheel for the CORMAK DG20 sharpener is an essential component for anyone expecting precision and reliability when sharpening drills. Its construction, material, and perfect compatibility with the machine guarantee long-lasting, efficient, and repeatable operation. Order the original grinding wheel today and keep your sharpener in full production readiness.

Stanje: novo, Leto izdelave: 2026, Avtomatska tračna žaga CORMAK H400SA je zmogljiva naprava, zasnovana za natančno in ponovljivo rezanje velikih jeklenih kosov, cevi in zaprtih profilov. Zaradi dvokolonske konstrukcije in avtomatizacije delovnega cikla je idealna rešitev za proizvodne obrate, delavnice in logistična centra, ki obdelujejo velike količine materiala. Glavne prednosti stroja: * Avtomatsko delovanje – celoten cikel rezanja brez posredovanja operaterja: od pritrditve materiala do njegovega rezanja in vrnitve roke. * Hidravlični pomik in objemka – zagotavljata hitro, varno in natančno rezanje. * Pomnilnik položaja roke in objemke – skrajša čas cikla in poveča učinkovitost serijske obdelave. * Sistem hlajenja in krtača za čiščenje traku – podaljšata življenjsko dobo tračne žage za kovino. * Velik obseg rezanja – možnost rezanja materialov s premerom do Ø400 mm ali 400 × 400 mm. Konstrukcija in tehnologija: Dvokolonska tračna žaga H400SA je zasnovana na stabilni jekleni konstrukciji z ohišjem iz litega železa, kar zagotavlja največjo togost in dušenje vibracij. Okvir, nameščen pod kotom 3° glede na podajalno mizo, olajša rezanje profilov in oblik. Natančnost in učinkovitost: Nledpfxsyctr Rs Anpsh Hidravlično upravljanje spuščanja roke z nastavitvijo sile rezanja in natančnim dušilnim ventilom omogoča prilagoditev pritiska posameznemu materialu. Hidravlični sistem za podajanje z elektronskim krmilnikom omogoča programiranje dolžine in števila rezanih odsekov. LCD zaslon prikazuje informacije o napredku, napakah in koncu materiala. Sistem za samodejno ustavljanje se odzove na zaznano napako ali zaključek programa rezanja. Uporaba: Model CORMAK H400SA je idealen za: * kovinsko industrijo in konstrukcije iz jekla, * centre za obdelavo profilov in oblik, * serijsko proizvodnjo v delavnicah in industrijskih obratih, * logistična podjetja, ki material režejo po meri. Standardna oprema: * Avtomatski cikel delovanja * Pomnilnik položaja roke in objemke * Hidravlična enota in sistem za podajanje * Krtača za čiščenje traku z pogonom * Sistem za hlajenje s tekočino * Bimetalna tračna žaga za kovino * Izjava o skladnosti CE * Navodila za uporabo (DTR) Tehnični podatki: avtomatska tračna žaga CORMAK H400SA Obseg rezanja: Ø400 mm ali 400 × 400 mm Dimenzije rezalne traku: 4900 × 41 × 1,3 mm Hitrosti traku: 40 / 60 / 80 m/min Glavni motor: 4,6 kW Hidravlični napajalnik: 1,5 kW Črpalka za hladilno tekočino: 0,09 kW Hod podajalnika: 500 mm Dimenzije (D × Š × V): 2600 × 2400 × 1700 mm Teža: 2100 kg

Stanje: novo, Leto izdelave: 2026, Adjustable 90° Spindle Positioner for Tapping Machine GT24 The Adjustable 90° Spindle Positioner GT24 is an advanced device that significantly enhances the precision and efficiency of the tapping process. Its primary function is to ensure the accurate positioning of the electric tapping arm at a 90° angle relative to the workpiece, enabling perfect alignment of the spindle to the material. Thanks to its innovative technology, the GT24 positioner offers high accuracy and reliability, making it an essential tool for any workshop involved in threading operations. Key Features of the GT24 Adjustable Positioner: - Precise adjustment: The positioner allows quick and accurate setting of the tapping arm at a 90° angle to the workpiece, which is crucial for achieving high-quality threads. - Ease of use: The positioning process is fast and intuitive, saving time and increasing work efficiency. - High stability: Utilising a neodymium magnet, the positioner ensures a firm and reliable attachment to the workpiece, minimising the risk of errors during threading. - Compatibility: The GT24 positioner fits a wide range of electric tapping machines available on our website, including models such as RGE30PW, RGE36PWx1200, RGE36PWx1700. - Robust construction: The GT24 positioner is made from high-grade materials, ensuring durability and resistance to intensive use in industrial environments. Design and Technology of the GT24 Positioner The GT24 adjustable positioner boasts a solid build engineered for heavy-duty use. Its main component is a neodymium magnet, which enables quick and reliable attachment to the workpiece. This technology gives the operator full control over precise positioning of the tapping machine, allowing for ideal results in a short period of time. Nodpfxsycvfys Anpjlh The positioner is also equipped with a 90° setting gauge system, ensuring precise adjustment of the tapping arm at a right angle. This system enables rapid adjustment of the device for various tapping tasks, making the GT24 a highly versatile tool for any workshop or production facility. Precision and Efficiency with the GT24 Positioner The GT24 adjustable positioner delivers not only precise alignment but also boosts work efficiency. Its fast and easy positioning process saves valuable time that would otherwise be spent manually adjusting the spindle. The positioning system provides high accuracy, resulting in superior thread quality and reduced risk of machining errors. Additionally, the positioner allows for flexible use with different materials and thread types, making it indispensable in production processes. Technical Specifications of the GT24 Positioner: Type: Neodymium adapter for spindle positioning Suitable for tapping machines: RGE36PWx1200, RGE36PWx1700, RG24x1200, RG24PWx1200, RG24PWx1700, RG36PWx1200, RG36PWx1700 Angle range: 90°

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, proizvajalec krmilnikov: Simens, model krmilnika: SINUMERIK 808D, skupna višina: 2.700 mm, skupna dolžina: 2.800 mm, skupna širina: 2.300 mm, širina mize: 500 mm, dolžina mize: 1.000 mm, obremenitev mize: 500 kg, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 24, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, Stroj kupljen avgusta 2025 skupaj s stružnico – oglaševana ločeno v drugem oglasu, uporabljen izključno za testiranje (do 20 ur delovanja). Zaradi spremembe poslovnih prioritet ne bomo zagnali načrtovane proizvodnje. Nledoyi Apropfx Anpeh Dodatno: vreteno 12.000 obr/min, 4. rotacijska os, merilna sonda za orodja TS27R. Stroj je v leasingu pri PKO Leasing S.A do avgusta 2028. Pogoji leasinga bodo predstavljeni po kontaktu. Prednost dajemo prenosu leasinga, čeprav je z dovoljenjem leasingodajalca možen tudi gotovinski nakup.

Stanje: novo, Leto izdelave: 2026, Rezkar-vrtalni stroj ZX 7055 VARIO DRO proizvajalca CORMAK je zmogljiv univerzalni rezkar, ki se uporablja za vrtanje, rezkanje in navojno obdelavo jekla in sive litine. Konstrukcija temelji na robustni litini, gladko nastavljive hitrosti v dveh območjih in digitalni prikaz pozicije zagotavljajo ponovljivo natančnost pri serijski in maloserijski obdelavi. Glavne prednosti stroja * Trdna, litinska podlaga in stebriček – stabilnost pri obdelavi zahtevnih delov, zmanjšanje vibracij in daljša življenjska doba orodja. * Gladka regulacija hitrosti vretena v 2 območjih: 75–438 vrt/min (nizka) in 438–2500 vrt/min (visoka) – optimalna izbira parametrov glede na premer orodja in material. * Digitalni prikaz (DRO) 2 osi – hitro pozicioniranje brez napak pri odčitavanju nonija in krajši čas nastavitve. * Avtomatski podaj vretena – enakomerno rezanje in manjše tveganje za zlom svedra pri globokem vrtanju. * Funkcija navojnega obdelovanja – ko se doseže želena globina navoja, se vreteno preklopi na povratno gibanje. * Izolirani zobniki – tiho delovanje prestav in stabilen navor na vretenu. * Repni vodila na osi – natančno gibanje mize in natančna geometrija. * Vrtljiva glava ±90° in nastavitev višine – enostavno faziranje, izdelava utorov in kotnih operacij. * Levi/desni vrtljaji – varno navojno obdelovanje in odstranjevanje orodja. * Učinkovit sistem hlajenja, ki učinkovito odvaja toploto med obdelavo, preprečuje pregrevanje orodja in materiala, s čimer se poveča natančnost obdelave in trajnost rezalnih orodij. Konstrukcija in tehnologija Osrednji del stroja je težka litina z širokimi vodili, ki zmanjšujejo upogib pri čelnem in cilindrično-čelnem rezkanju. Masivna križna miza z veliko delovno površino ima natančno brušeno površino, kar zagotavlja ravnost. Vreteno s stožcem MK4 poganja motor S1/S6 1,5/1,8 kW z gladko regulacijo hitrosti. Integriran sistem hlajenja stabilizira temperaturo območja rezanja in izboljša kakovost površine. Natančnost in učinkovitost obdelave Kombinacija DRO 2-osi, izoliranih prestav in robustnih vodil zagotavlja visoko ponovljivost dimenzij in gladkost površine. Avtomatski podaj vretena in dva območja hitrosti omogočajo izbiro stabilnih parametrov za vrtanje jekla do premera Ø32 mm in sive litine do premera Ø45 mm, pa tudi za čelno rezkanje do premera Ø80 mm in cilindrično-čelno rezkanje do premera Ø28 mm. Ergonomska nastavitev višine glave skrajša čas prestavitve pri serijski in posamični obdelavi. Standardna oprema * gladka regulacija hitrosti vretena, * digitalni prikaz 2 osi, * rezkar glava 80 s ploščicami, * vrtalno vpenjalo, * sistem hlajenja. Nljdpfx Asyapyrenpoh Tehnični podatki Tehnični parametri Največja velikost vrtanja Lita litina (HT200) 45 mm Jeklo 32 mm Največje čelno rezkanje 80 mm Največje cilindrično-čelno rezkanje 28 mm Dimenzije delovne mize 820 × 240 mm Pomik mize (X/Y) 595 / 185 mm Največja zmogljivost navojnega obdelovanja M24 Stožec vretena MK4 Hitrost vretena Motor S1/S6: 1,5 / 1,8 kW Nizko območje 75–438 vrt/min Visoko območje 438–2500 vrt/min Pomik vretena Ročni 107 mm Avtomatski 100 mm Razdalja vretena od površine stebrička 250 mm Največja razdalja med konico vretena in delovno mizo 445 mm Neto teža 350 kg Splošne dimenzije 1084 × 924 × 1550 mm Višina z podstavkom: 2150 mm

Stanje: novo, Leto izdelave: 2026, Električna navojna strojnica CORMAK RGE36PWx1700 je napredna naprava za navojčenje, ki je idealna za uporabo v večjih proizvodnih obratih in manjših delavnicah. Zahvaljujoč tej navojni strojnici je mogoče bistveno skrajšati čas navojčenja, kar vodi do večje produktivnosti in natančnejših navojev. Zasnovana je tako, da zagotavlja visoko zanesljivost, enostavno upravljanje in vsestranskost v različnih industrijskih aplikacijah. Glavne prednosti električne navojne strojnice CORMAK RGE36PWx1700: * Visoka natančnost in hitrost navojčenja: Zahvaljujoč močnemu servo pogonu in navojnemu ramenu strojnica zagotavlja natančno navojčenje v kratkem času, kar je ključnega pomena za serijsko proizvodnjo. * Enostavno upravljanje: Naprava je opremljena z na dotik občutljivim upravljalnim panelom v poljščini in angleščini, ki omogoča enostavno nastavitev parametrov navojčenja, kot so hitrost vrtenja, smer navojčenja in globina navoja. * Fleksibilnost: Navojni ramenski omogoča navojčenje pod različnimi koti, rotacijska pogonska enota pa omogoča natančno nastavitev stroja za navojčenje v različnih aplikacijah. * Učinkovito hlajenje: Sistem mikro-razprševanja hladi orodja pri minimalni porabi maziva, kar zagotavlja daljšo življenjsko dobo in zmanjšuje izgube materiala. * Celovita oprema: Navojna strojnica je opremljena s sistemom za odpihovanje sekancev, kar zagotavlja boljšo vidljivost obdelovanega materiala in povečano učinkovitost dela. Konstrukcija in tehnologija navojne strojnice CORMAK RGE36PWx1700 Nodpfxsycdhpe Anpjlh Navojna strojnica CORMAK RGE36PWx1700 ima robustno konstrukcijo, ki omogoča učinkovito in natančno navojčenje v različnih industrijskih okoljih. Poganja jo servo pogon, kar zagotavlja zanesljivo delovanje in omogoča natančno upravljanje parametrov navojčenja. Zahvaljujoč navojnemu ramenu in rotacijski pogonski enoti je strojnica sposobna izdelovati navoje v različnih materialih, kot so jeklo, nerjavno jeklo, aluminij in druge barvne kovine. Navojni ramenski je opremljen z hitro vpenjalnim držalom, ki omogoča hitro in enostavno vpenjanje navojnih orodij. Zahvaljujoč uporabi preobremenitevenih sklopk v vpenjalih, ki jih je mogoče nastavljati, strojnica zagotavlja dodatno zaščito orodja pred poškodbami med delovanjem. Ta sistem omogoča tudi natančno prilagajanje vrtilnega momenta, kar zagotavlja natančnost navojčenja. Standardna oprema navojne strojnice CORMAK RGE36PWx1700 * Na dotik občutljiv upravljalni panel: Omogoča enostavno programiranje parametrov navojčenja, kot so hitrost vrtenja, smer navojčenja in globina navoja. * Rotacijski navojni ramenski: Omogoča navojčenje pod poljubnim kotom. * Vpenjala za navojna orodja s preobremenitevnimi sklopkami: Zagotavljajo zaščito naprave pred prekomerno obremenitvijo, kar zagotavlja dolgotrajno vzdržljivost. * Sistem mikro-razprševanja: Neprekinjeno hlajenje orodja pri minimalni porabi hladilnega sredstva. * Odpihovalnik sekancev: Omogoča odstranjevanje sekancev, kar izboljšuje vidljivost med navojčenjem. Tehnične specifikacije navojne strojnice CORMAK RGE36PWx1700 Moč 2 kW Napajanje 230V Teža 56 kg Maks. domet ramena 1700 mm Maks. hitrost vrtenja 125 vrt/min V kompletu: Vpenjala za navojna orodja v območju od M5 do M36 *Stroj se prodaja brez delovne mize, primeža in navojnih orodij.

Stanje: novo, Leto izdelave: 2026, Set of filters essential for oil changes in CORMAK screw compressors – model: LUFT 400 The oil filter is indispensable for maintaining the cleanliness of the lubricating oil circulating within the system. It removes contaminants and metal particles generated through normal wear and tear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the service life of the oil separator. Purpose: Removal of contaminants from lubricating and cooling oil. Benefits: Protection of bearings and screw elements, reduced friction and overheating, extended oil life. The air filter serves as the first line of defense for your compressor. It effectively captures solid particles, dust, and environmental debris before they reach the screw block. Using a clean air filter prevents abrasion of compression elements and minimizes the risk of contamination in both oil and compressed air. Purpose: Protects the screw block and the rest of the system from environmental impurities. Benefits: Increased compressor lifespan, sustained performance, lower energy consumption. The oil separator filter (separator) is a key component in oil-injected compressors, responsible for separating oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is critical for protecting pneumatic tools and maintaining high standards in production processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieving high-quality compressed air by efficiently separating oil mist. Nlodpfx Aoycf Iqsnpjh Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: Offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filter materials with large surface area and precise micron rating. Optimal Price: We provide high quality at a competitive price, offering a cost-effective alternative to original parts. Take care of your CORMAK compressor today!

Stanje: rabljeno, prevoženi kilometri: 270.159 km, moč: 220 kW (299,12 KM), prva registracija: 03/2022, vrsta goriva: dizel, največja dovoljena obremenitev: 6.410 kg, skupna masa: 13.500 kg, konfiguracija osi: 4x2, medosna razdalja: 4.760 mm, barva: črn, voznikova kabina: drugo, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, vzmetenje: zrak, prostornina tovornega prostora: 47 m³, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.600 mm, Leto izdelave: 2022, Oprema: ABS, dvižna zadnja plošča, nadzor oprijema, parkirni grelec, spojka prikolice, tempomat, Ta ponudba ni zavezujoča. Pridržana pravica do sprememb in napak. Če je navedena tuji valuta, velja tekoči dnevni menjalni tečaj. Velja valuta lokacije vozila. Motor OM936, R6, 7,7 l, 220 kW (299 KM), 1200 Nm, zmogljiv zavorni sistem motorja, sprednja os s zračno vzmetjo, sprednja os, 5,3 t, kabelsko upravljanje zračne vzmetje, zračna vzmet, zadnja os, medosna razdalja 4760 mm, plastični rezervoar 180 l, dodatni plastični rezervoar 100 l, rezervoar za AdBlue 35 l, priklopna naprava, priklopna naprava, kabina S, kabina S, LED dnevne luči, zavesa proti soncu, stranska, voznikova stran, dodatni grelec s toplo zračno pihalnikom, udoben voznikov sedež, udobje, elektronski zavorni sistem z ABS in ASR, opozorilni sistem pri vzvratni vožnji, kombiniran z opozorilnimi lučmi, senzor za dež, meglenke, sistem za ohranjanje voznega pasu, aktivni zavorni sistem, varnostni blazin, voznik, tempomat, nadgradnja: druga, TANG Fahrzeugbau GmbH, LBW Bär, 1000 kg, 1800 listov, priklopna glava premera 40. Nlodpjz I E Rxofx Anpsh

Stanje: rabljeno, prevoženi kilometri: 34.900 km, moč: 96 kW (130,52 KM), prva registracija: 06/2024, vrsta goriva: dizel, skupna masa: 3.300 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, Leto izdelave: 2023, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Posebna oprema: nov lesen pod sovoznikov zračni meh fiksna kroglasta vlečna kljuka program za stabilizacijo prikolice (TSA) LED luč v tovorni komori rezervno kolo z voznimi pnevmatikami tehnološki paket 10 asistent za žaromete s senzorjem za dan/noč, brisalci s senzorjem za dež, ogrevano vetrobransko steklo, avdio sistem: radio s 4" multifunkcijskim zaslonom, parkirni sistem spredaj in zadaj, meglenke, tempomat, usnjen volan, vzvratna kamera s barvnim zaslonom, zadnje zunanje luči zgoraj LED, asistenčni sistem: pomoč pri zaviranju v sili, asistenčni sistem: asistent za ohranjanje voznega pasu, asistenčni sistem: asistent za ohranjanje voznega pasu s senzorjem za zaznavanje utrujenosti visoka obloga v tovornem/potniškem prostoru celoletne pnevmatike tovorni zaščitni paket jeklena platišča 6,5x16 centralno zaklepanje z dvojno blokado centralno zaklepanje z daljinskim upravljanjem Sovoznikov zračni meh, celoletne pnevmatike, talna obloga: vinil v tovornem/potniškem prostoru, LED luč v tovorni komori, tovorni zaščitni paket, rezervno kolo v voznem stanju, jeklena platišča 6,5x16, tehnološki paket 10, visoka obloga v tovornem/potniškem prostoru, vinil obloga v tovornem/potniškem prostoru, centralno zaklepanje z dvojno blokado Nledpfxjzbf T Do Anpjh Dodatna oprema: shranjevalni prostor v stropu kabine, program za stabilizacijo prikolice (TSA), avdio sistem 13: digitalni radio sprejem (DAB / DAB+) s 4" multifunkcijskim zaslonom, električno nastavljiva in ogrevana zunanja ogledala, smerniki integrirani v zunanjih ogledalih, potovalni računalnik, pristopne luči, elektronska porazdelitev zavorne sile (EBD), elektronski nadzor oprijema, asistenčni sistem: pomoč pri speljevanju v klanec, asistenčni sistem: pomoč pri zaviranju v sili, asistenčni sistem: pomoč pri bočnem vetru, FordPass Connect vklj. eCall, zadnja krilna vrata (odpiranje 180 stopinj), ogrevanje z recirkulacijo zraka, karoserija/nadgradnja: visoka furgonska izvedba, različica karoserije: srednje visoka streha, maska z kromirano letvijo, višinsko in vzdolžno nastavljiv volanski drog (volan), motor 2,0 l – 96 kW TDCi KAT, My Key (programirljiv drugi ključ vozila), parkirni sistem spredaj in zadaj, digitalni radio sprejem (DAB+), medosna razdalja 3750 mm, nizke emisije po normi Euro 6d-TEMP, ročica menjalnika iz usnja, brisalci z intervalnim in nastavljivim delovanjem, drsna vrata tovorn/potnišk prostor desno, zadnji blatniki, stranske zaščitne letve, sedežni paket 13: voznikov sedež (4-smerno nastavljiv) – dvojni sovoznikov sedež, tkanina, start/stop sistem, trend, integrirana zadnja stopnica, pritrditvena ušesa (10), nadzor nagiba vozila (Roll Stability Control, RSC), toplotno izolacijska zatemnjena stekla, dovoljeno skupno težo 3,30 t, dodatno električno ogrevanje

Stanje: novo, Leto izdelave: 2026, COMPRESSED AIR TANK 270 L – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Main advantages of the 270 L pressure vessel: - Professional pressure vessel construction – made from high-grade 4 mm thick steel, resistant to both pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. - Working pressure of 11 bar – suitable for most pneumatic systems, including those with increased requirements. - High capacity – 270 liters – enables stable supply to the pneumatic installation and reduces the frequency of compressor start-ups. - Multi-connection system – as many as 5 connections (1", 2", 1/2") for flexible integration with various installations. - Superior build quality – durable anti-corrosion coating applied both inside and outside the tank. - Universal mounting orientation – vertical design saves space in your facility. Construction and technology – robust design for demanding industrial applications This compressed air tank was engineered for intensive use in industrial environments. The tank body is made from structural steel with a 4 mm wall thickness, ensuring resistance to working pressures up to 11 bar as well as long-term durability. All welds undergo rigorous quality control, and the entire tank is protected with an anti-corrosive paint coating, resistant to chemical and environmental factors. The tank is supplied with a nameplate featuring the CE mark and the UDT notified body number, confirming its compliance for use on the Polish and European markets. Complete technical documentation, passport, and material certificates are provided. Nlodpsxbzalefx Anpeh Standard equipment: - Connection ports: 5 pcs – diameters 1", 2", 1/2" - Nameplate with CE marking - UDT notified body number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosive coating

Stanje: novo, Leto izdelave: 2026, Stružnica CORMAK TH410S s spiralnim valjem je tehnično napredna strojna obdelovalna naprava za obdelavo lesa, zasnovana za profesionalne uporabnike, ki iščejo največjo natančnost, dolgo življenjsko dobo in udobno delo. Spiralni valj s 72 zamenljivimi ploščicami iz volframovega karbida zagotavlja izjemno kakovost površine, bistveno manj hrupa in zmanjšano porabo potrošnega materiala v primerjavi s klasičnimi rešitvami z noževim valjem. Glavne prednosti stružnice CORMAK TH410S s spiralnim valjem: * Spiralni valj s 72 ploščicami – enakomerno rezanje, zmanjšanje vibracij in hrupa za do 50 %, bistveno daljša življenjska doba v primerjavi s klasičnimi linearnimi rezili. * Zamenljive ploščice iz volframovega karbida – možnost vrtenja ali zamenjave posameznih segmentov v primeru obrabe ali poškodb – zmanjšanje stroškov delovanja. * Brušena lita plošča – zagotavlja optimalno drsenje in stabilnost pri vodnji obdelovanca. * Tri nastavitve hitrosti podajanja – možnost prilagoditve hitrosti obdelave vrsti lesa in proizvodnim zahtevam. * Digitalni prikazovalnik – natančna nastavitev višine do 0,1 mm zahvaljujoč natančnemu indikatorju na ročnem kolesu. * Verižni pogon – gladko in natančno vodenje materiala skozi obdelovalno cono. * Izboljšane varnostne zaščite – skladnost s standardi varnosti in tehnične dokumentacije, kar zagotavlja varnost uporabnika. Konstrukcija in tehnologija Stružnica CORMAK TH410S je zasnovana na robustni jekleno-litni konstrukciji, ki zagotavlja visoko togost in odpornost na vibracije. Spiralni valj s premerom 95 mm je opremljen s 72 ploščicami iz volframovega karbida, nameščenimi v spiralni obliki, kar zagotavlja neprekinjeno rezanje in odpravlja tveganje za trganje vlaken, tudi pri trdih in smolatih vrstah lesa. Pokrov za odsesavanje s funkcijo dušenja omogoča hiter dostop do valja in enostavno vzdrževanje. Nlsdpfx Asx Dlp Ajnpoh Natančnost in učinkovitost Z obsegom strojenja od 5 do 230 mm in delovno širino 410 mm omogoča naprava obdelavo tako tankih desk kot tudi debelih konstrukcijskih elementov. Hitrost valja 4050 vrt/min in močan motor z močjo 3,0 kW (S1) zagotavljajo visoko učinkovitost tudi pri intenzivni uporabi. Uporaba spiralnega valja omogoča doseganje gladke površine brez potrebe po brušenju, kar bistveno skrajša čas priprave materiala za nadaljnjo obdelavo. Standardna oprema: * spiralni valj s 72 ploščicami iz volframovega karbida, * digitalni prikazovalnik višine strojenja, * pogon podajanja z verižnim prenosom, * podaljšana plošča z podpornimi valji, * pokrov za odsesavanje in dušenje, * celoten varnostni sistem v skladu s tehnično dokumentacijo in standardi varnosti. Tehnične specifikacije Širina strojenja 410 mm NASTAVITEV VIŠINE STROJENJA 5–230 mm Premer valja stružnice 95 mm Število rezil (spiralnih ploščic) 72 kos Hitrost vrtenja valja stružnice 4050 vrt/min Hitrost podajanja 6 m/min Priključek za odsesavanje ø100 mm Moč motorja 4,2 kW Moč motorja S1 100% 3,0 kW Napetost 400 V Premer priključka za odsesavanje 100 mm Bruto teža 263 kg DIMENZIJE Širina 1110 mm Globina 710 mm Višina 1020 mm Velikost mize – širina 930 mm Velikost mize – globina 410 mm

Stanje: novo, Leto izdelave: 2026, THEOR 20 Screw Compressor with Refrigerant Compressed Air Dryer. The CORMAK THEOR series screw compressor, manufactured by the Polish brand CORMAK, features state-of-the-art solutions for pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust construction, and high performance ensure efficient and trouble-free operation. CORMAK screw compressors are a byword for innovation and reliability, designed for the most demanding applications. • Innovative design: Our compressors are based on advanced engineering and European manufacturing precision. The robust construction, enhanced with modern components, guarantees long-lasting and trouble-free operation under any conditions. • Integrated refrigerant dryer: The COMPACT version with a built-in dryer provides a space-saving, all-in-one solution. The integrated refrigerant dryer guarantees dry and clean air, protecting your installation against corrosion and damage. • Quiet operation and comfort: Designed with attention to detail, our compressors feature exceptionally low noise levels. Effective sound and vibration damping systems ensure a comfortable working environment, improving concentration and operator well-being. • Intelligent control: The intuitive MAM electronic control panel is the command center of your compressor. It allows for precise parameter monitoring, maintenance planning, and rapid diagnostics, ensuring stability and protection of key components. • Adaptable to your needs: We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing perfect adaptation to the specific requirements of your industry. • Dynamic operating pressure: Automatic pressure regulation ensures the compressor supplies exactly the amount of compressed air required at any moment, maximizing energy efficiency and minimizing waste. • Sustainable development: We focus on environmentally friendly solutions. The energy-saving technologies in our compressors not only reduce your costs but also minimize environmental impact. The heat recovery option ensures maximum energy utilization. Nlodpoy Rpmnofx Anpsh Technical specifications • Motor power: 15 kW • Voltage: 400V/50Hz • Output at 0-6 bar: 2100 L/min • Output at 6 bar: 2000 L/min • Output at 8 bar: 1700 L/min • Output at 10 bar: 1600 L/min • Outlet port diameter (G): G1" • Dimensions: 1550 x 740 x 1180 mm • Weight: 500 kg

Stanje: novo, Leto izdelave: 2026, The CORMAK LUP7TS WOOD SPLITTER is an electric log splitter with a splitting force of 7 tons, designed for preparing firewood and kindling. This model handles logs up to 520 mm in length and 250 mm in diameter, making it ideal for household use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-handed operation for increased safety, a protective cage covering the work area, and a wheeled stand included as standard. Choose the CORMAK LUP7TS if you need a compact 230 V log splitter for regular firewood preparation at home. Applications for the CORMAK LUP7TS Log Splitter The CORMAK LUP7TS log splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended uses: - Household use - Farms - Houses heated with wood - Fireplace and stove users - Small firewood preparation points - Agritourism facilities and guesthouses - Workshops and utility rooms - Users preparing both seasoned and fresh wood The LUP7TS model is an excellent choice for those who want to split firewood faster and more conveniently, minimizing the effort involved in manual chopping. Who is the 7-ton log splitter for? The CORMAK LUP7TS is designed for users who need a compact and user-friendly device for splitting firewood. With its 7-ton splitting force, 230 V power supply, and compact, stand-free design, this model is well suited for home use, on farms, or in small service points. Ideal for: - Owners of wood-heated homes - Fireplace users - Farms preparing their own firewood - People looking to reduce manual wood chopping - Small businesses and facilities with regular firewood needs - Users seeking an easier-to-store splitter compared to stand-mounted models The CORMAK LUP7TS features a two-handed operation system, increasing control over the splitting process. The operator works with both hands, reducing the risk of accidental contact with the working area. An additional safety element is the protective cover over the working area. This feature is especially important for regular use, providing the operator with a safer and more predictable working environment. Smooth adjustment of splitting length The splitter features smooth adjustment of the splitting length, allowing the device to be better adapted to the length of your wood. This helps to limit unnecessary ram movement and speeds up the preparation of subsequent logs. This is especially practical when working with uniform pieces of wood, such as preparing firewood for a fireplace, stove, or boiler. Standard equipment - CORMAK LUP7TS hydraulic log splitter - Wheeled stand - Hydraulic cylinder with automatic return - Two-handed operation system - Protective safety cover - Log catcher tray - Stable splitting wedge - 230 V / 2200 W motor - Powder-coated steel construction Technical specifications for CORMAK LUP7TS: Splitting force: 7 T Maximum log diameter: 250 mm Maximum log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: 230 V Length: 950 mm Nlodpfx Anozarv Aopsh Width: 325 mm Height: 510 mm Net / gross weight: 63 / 68 kg Warranty: 2 years

Stanje: novo, Leto izdelave: 2026, The Rezarko ZX7045 B1L drilling and milling machine is a versatile drill-mill designed for precise metalworking in both workshop and production environments. This machine combines drilling and milling functions, ensuring operational stability thanks to its robust cast iron construction and a wide range of spindle speeds. It’s the ideal solution for facilities that demand repeatability, rigidity, and real productivity. Key advantages: - Heavy-duty, stable cast iron body – minimizes vibrations during milling and drilling. - Automatic spindle feed (125 mm) – increases efficiency in series operations. - Height adjustment on the support, not the column – ensures greater setting precision. - 12 spindle speed ranges up to 3200 rpm – allows matching to material type and tooling. - Integrated coolant system – provides stable cutting conditions and extends tool life. - Dovetail guides – ensure high rigidity and precise movements. - ±90° rotating head – enables angular machining. - Quiet operation due to ground gears; reversible (left/right) spindle rotation available. Construction and technology: The ZX7045 B1L drill-mill is designed as a compact yet fully industrial metal milling machine. The massive cast iron base and housing provide high rigidity. The cross table measures 1000 x 240 mm and features a precisely ground work surface, allowing accurate clamping of workpieces. The MT4 standard spindle allows for a wide range of tooling – such as end mills, face milling cutters, and taper shank drills. The 1.8 kW (2.5 HP) motor, powered by 400 V, ensures stable operation, even with larger milling diameters. Precision and working efficiency: Thanks to X/Y/Z travels of 560/190/430 mm, the machine covers a broad scope of operations: drilling up to 32 mm in steel and 45 mm in cast iron, face milling up to 80 mm, and end milling up to 28 mm. The variable quill feed rates (0.12; 0.18; 0.25 mm/rev) allow precise adjustment to the work material and required finish quality. Standard equipment: - MT4/B18 drill chuck arbor - 3-16 mm/B18 drill chuck Njdpfx Ajy E Hk Hjnpslh - MT4/MT3 reducing sleeve - MT3/MT2 reducing sleeve - Hand tools - Operating manual in Polish Optional accessories: - Machine stand - Automatic X-axis feed - Swivel, tilting, and precision vices - Rotary tables and indexing heads - Tapping and milling heads - Tool holders, driving arbors Technical specifications: - Drilling capacity in steel: 32 mm - Drilling capacity in cast iron: 45 mm - Face mill diameter: 80 mm - End mill diameter: 28 mm - Spindle speeds: 95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200 rpm (12 steps) - Spindle taper: MT4 - Spindle travel: 125 mm (automatic feed) - Table dimensions: 1000 x 240 mm - Base dimensions: 440 x 600 mm - Max. distance spindle to table: 445 mm - Spindle to column surface distance: 262.5 mm - Travel X/Y/Z: 560/190/430 mm - Quill feed speeds: 0.12, 0.18, 0.25 mm/rev - Head swivel range (left/right): 90° - Motor power: 1.8 kW (2.5 HP) - Power supply: 400 V - Weight: 375 kg

Stanje: novo, Leto izdelave: 2026, The CORMAK PT410S jointer-thicknesser with spiral cutterhead is an industrial-class professional woodworking machine that combines the functions of a jointer and thickness planer in one compact design. Featuring a state-of-the-art spiral cutterhead, it ensures maximum machining precision, exceptional surface quality, and quiet operation. This is an excellent choice for woodworking shops, furniture manufacturers, and workshops that value efficiency, accuracy, and reliability. Key advantages of the CORMAK PT410S jointer-thicknesser: - Spiral cutterhead – minimizes noise, reduces cutting resistance, delivers perfect finishing even when working with challenging wood species. - Fast function change – instant switch between jointer and thicknesser modes thanks to independently opening tables and chip extraction cover. - Stable construction – heavy cast-iron frame and tables guarantee rigidity and vibration reduction during operation. - Precise adjustment – clearly readable scale and precision depth and fence angle adjustment mechanisms. - High performance – 4.0 kW motor (S6 duty cycle) ensures smooth and efficient processing even on wide workpieces. Design and Technology The CORMAK PT410QS model is engineered for years of intensive use. Its cast-iron jointer tables ensure perfect flatness and stability of the workpiece, while the centrally mounted thicknessing table provides uniform lifting. The swing-away aluminum fence with precision scale enables angle adjustment from 90° to 45° for proper material guidance. Precision and Work Efficiency Thanks to the 95 mm diameter spiral cutterhead operating at 4300 rpm, the thicknesser delivers smooth, even surfaces even on hard or resinous woods. Feed is smooth and vibration-free, with no risk of fiber tear-out. The planing height adjustment up to 220 mm allows processing of large elements, both solid wood and laminated panels. Applications The CORMAK PT410S jointer-thicknesser is ideal for: - woodworking and furniture shops - craft workshops Nodpeyy Nl Njfx Anpjlh - stair and wooden element production - solid wood and laminated board processing This machine is intended for demanding users seeking a precise and reliable jointer-planer. Standard equipment: - cast-iron jointer tables - spiral cutterhead - cutterhead guard - chip extraction outlet - feed switch - emergency stop Optional equipment: - transport trolley - knife setting jig - mortising unit Technical Data Jointer table dimensions: 1680 x 410 mm Thicknesser table dimensions: 750 x 410 mm Cutterhead diameter: 95 mm Spindle speed: 4300 rpm Fence tilt angle: 90–45° Chip outlet: 100 mm Max. thicknessing height: 220 mm Motor power: 4.0 kW / 400V Max. working width: 410 mm Machine dimensions: 1680 x 1100 x 1100 mm Weight: 360 kg

Stanje: novo, Leto izdelave: 2026, The side brush for the ZP7500 CORMAK sweeper is a practical accessory that significantly increases the machine’s cleaning efficiency. It is responsible for thoroughly sweeping hard-to-reach areas—along walls, racks, curbs, and in corners where the main brush cannot reach. As a result, surfaces are left cleaner after just one pass, eliminating the need for repeat cleaning. Using the side brush also expands the sweeper’s working width, directly boosting work performance. In practice, this means faster cleaning of large warehouse floors, yards, or parking areas. Durable construction and wear-resistant bristles ensure a long service life, even under intensive use. The brush is engineered for demanding applications—it effectively collects fine dust as well as larger debris such as sand, leaves, or gravel. Its design is optimized for harsh industrial environments—resistant to mechanical damage and heavy-duty operations. Quick and intuitive to install or remove, the brush can be serviced or replaced without downtime. Main advantages: - Thorough sweeping along edges and in corners Nlodpsyvp Ngofx Anpsh - Increased working width and higher productivity - Effective collection of both fine dust and larger debris - Reduced manual labor and fewer passes required - Robust, abrasion-resistant bristles - Fast installation and convenient operation

Stanje: novo, Leto izdelave: 2026, Air filter for the ZP7500 sweeper is a key component of the filtration system, responsible for effectively trapping dust, fine particles, and other contaminants generated during operation. Its use significantly reduces airborne dust, resulting in greater operator comfort and a cleaner working environment. During sweeping, debris is not only collected by the brushes but also suctioned together with air into the machine. The air filter ensures efficient capture of these particles, preventing fine dust from being released back into the surroundings. In practice, this means more efficient and virtually dust-free cleaning – especially important in warehouse halls, production areas, and enclosed spaces. A large filtration surface and the proper structure of the filter media allow for the retention of even very fine fractions. Modern sweepers use panel filters, which are characterized by high efficiency and ease of maintenance – they are often equipped with shaking systems that facilitate cleaning and consistent performance. The filter also serves a protective function for the machine's components – it prevents contaminants from entering the suction system and other working elements, reducing the risk of breakdowns and extending the machine's service life. An additional advantage is easy access and quick filter replacement, enabling ongoing optimal machine maintenance without unnecessary downtime. Regular filter checks and cleaning are key to maintaining the highest performance of the sweeper. Key benefits: Nedsyvp Tfepfx Anpjlh effective dust suppression during operation improved air quality in the workspace high efficiency in filtering fine particles protection of machine components from contamination extended service life of the sweeper easy maintenance and quick replacement The air filter is an essential accessory for users of the ZP7500 sweeper who demand the highest cleaning efficiency while ensuring comfort and safety – especially in dust-intensive environments.