Bito Pretočni Regali, Fifo, 2050X1800X2100 Mm nakup rabljenega (82.057)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) Hodpfjmhhyajx Altjr - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Hsdpfxemhh Ane Alter Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm Hodpfx Aoh Ek Dajlter = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included Hjdpfx Aomhhf Seltor - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Hedpfx Aljmhhl Heter Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation Hjdpfx Aljmidyfoter - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Hjdpfxomkixws Alter Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing Hjdpfxemhh Dto Altjr - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: zelo dobro (rabljeno), Rotary plate Diameter: 100 mm Length: 380 mm Width: 160 mm Thickness: 32 mm Weight: 4 kg Hjdsln Ukcspfx Altor Other sizes available on request.

Stanje: zelo dobro (rabljeno), Step clamp (28366) Clamping height: 200 - 250 mm T-slot width: 12 mm Hsdpfsln Ulasx Altsr Clamping screw: M10 4 pieces available Weight: 8.5 kg

Stanje: dober (rabljeno), Lastnosti: * Rabljena paletna valjčna steza proizvajalca Bito * Stanje: rabljeno * Barva: pocinkano * Strokovno demontirana in zapakirana * Zaloga približno 14 metrov * Cena na meter Tehnični podatki Sestavljena iz 7 segmentov 7 x segmentov po pribl. 2.000 mm dolžine Skupna širina: pribl. 880 mm Širina valjev: pribl. 855 mm Transportna širina: pribl. 870 mm Razdalja med osmi: pribl. 70 do 95 mm Hedefw Nfzopfx Altjr Premer valja: 60 mm Material: jeklo/pocinkano Višina okvirja: pribl. 110 mm Vsak segment vsebuje 2 do 4 zaviralne valje. Premer zaviralnih valjev: 80 mm Paletna valjčna steza Zaradi odlične izdelave paletne valjčne steze vaš material tudi pri večjih obremenitvah gladko drsi do namembnega mesta. Rešitve po meri za vašo intralogistiko Za valjčne steze, tračne transporterje, poševne transporterje ali teleskopske transporterje za nakladanje in razkladanje vašega blaga smo vaš zanesljiv partner! Z veseljem pripravimo individualno ponudbo ali svetujemo pri načrtovanju in montaži. Sporočite nam vaše potrebe in lokalne pogoje. Izkoristite naše dolgoletne izkušnje in odlično mrežo strokovnjakov. Za podjetja iz različnih panog, kot so logistika, farmacevtska industrija, obrt ali elektroindustrija, smo že uspešno izpeljali številne projekte. Skupaj bomo poiskali rešitve za stroškovno učinkovito in trajnostno optimizacijo vaših procesov in materialnega pretoka. Po želji vam lahko ponudimo tudi popolnoma avtomatizirane sisteme za razvrščanje ali dodatne komponente, kot so regalni sistemi za komisioniranje ali zaboji.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer valja: 60 mm, širina valja: 855 mm, skupna širina: 880 mm, skupna dolžina: 525.000 mm, transportna dolžina: 525.000 mm, razmak osovin: 145 mm, višina okvirja: 80 mm, Paletni transportni trak/valjčna proga približno 525 metrov Proizvajalec: BITO Stanje: rabljeno Barva: pocinkano Zaloga: približno 525 metrov Skupna širina: približno 880 mm Širina valjev: približno 855 mm Širina transportne površine: približno 855 mm Hsdpfouh Tbmjx Altjr Razdalja osi: približno 145 mm Premer prereza valja: približno 60 mm Premer valja: približno 80 mm Material: jeklo (pocinkano) Višina okvirja: približno 80 mm Sestava sistema iz 213 segmentov: 28 segmentov: približno 2110 mm dolžine 14 segmentov: približno 2130 mm dolžine 12 segmentov: približno 2350 mm dolžine 7 segmentov: približno 2490 mm dolžine 9 segmentov: približno 2710 mm dolžine 30 segmentov: približno 2830 mm dolžine 58 segmentov: približno 2850 mm dolžine 38 segmentov: približno 3025 mm dolžine Na segment 1 do 2 zavorni valji Cena neto na meter Noge je treba naročiti posebej Lastnosti: Stanje: popolnoma delujoče, z vidnimi sledmi uporabe Idealno za hiter transport materiala Strokovno demontirano in zapakirano Prevzemni naslov: Industriestraße 5 (47918 Tönisvorst) Transportna tehnika je bila v uporabi do demontaže. Zaradi odlične izdelave transportne tehnike vaš material, tudi pri visokih obremenitvah, mehko drsi do cilja. Rešitve po meri za vašo intralogistiko Za valjčne proge, tračne proge, transportne trakove z naklonom ali teleskope za nakladanje in razkladanje blaga smo vaš strokovni partner! Z veseljem pripravimo individualno ponudbo ali vam svetujemo glede zasnove ali montaže. Sporočite nam vaše potrebe in lokalne pogoje. Izkoristite naše dolgoletne izkušnje in izvrstno mrežo strokovnjakov. Za podjetja iz različnih sektorjev, kot so logistika, farmacija, obrt ali elektronika, smo že uspešno realizirali projekte. Skupaj bomo našli rešitve za cenovno ugodno in trajnostno optimizacijo vašega procesa in pretoka materiala. Ponudimo lahko tudi popolnoma avtomatizirano sortirno tehniko ali dodatne komponente, kot so komisionirne regale ali zaboji.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer valja: 60 mm, širina valja: 855 mm, skupna širina: 880 mm, skupna dolžina: 2.120 mm, transportna dolžina: 2.120 mm, razmak osovin: 125 mm, višina okvirja: 80 mm, Pallet loading element / Pallet roller conveyor Manufacturer: BITO Condition: Used Model/Type: Roller Overall length: approx. 2120 mm Overall width: approx. 880 mm Conveying width/Roller width: approx. 855 mm Roller diameter: approx. 60 mm Axle distance: approx. 125/145 mm Frame: Steel / Galvanized Frame height: approx. 80 mm Includes one brake roller per unit (diameter: approx. 80 mm) Stock: 6 units Price per unit Support feet to be ordered separately Support feet to be ordered separately Features: Hodpfx Aouh Tf Esltor Condition: Fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was operational until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for the loading and unloading of your goods, we are your experienced partner! We are happy to prepare a custom quotation or assist you with planning or assembly questions. Simply let us know your requirements and on-site conditions. Benefit from our many years of experience and our outstanding network of specialists. We have already successfully completed projects for companies from various sectors, such as logistics, the pharmaceutical industry, skilled trades, and electronics. Together we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can even offer fully automated sorting technology or complementary components such as picking racks or containers.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer valja: 60 mm, širina valja: 855 mm, skupna širina: 880 mm, skupna dolžina: 2.120 mm, transportna dolžina: 2.120 mm, razmak osovin: 125 mm, višina okvirja: 80 mm, vrsta pogona: Schwerkraft, Pallet Removal Unit / Pallet Roller Conveyor / Roller Conveyor Manufacturer: BITO Condition: Used Model/Type: Roller Total length: approx. 2120 mm Total width: approx. 880 mm Conveyor/roller width: approx. 855 mm Roller diameter: approx. 60 mm Axle spacing: approx. 125/145 mm Frame: Steel / galvanized Frame height: approx. 80 mm Hjdpfouh Tlrox Altsr Includes one brake roller per unit (diameter: approx. 80 mm) Stock: 22 units Price per unit Feet must be ordered separately Features: Condition: fully functional with signs of wear Ideal for rapid material transport Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst, Germany) The conveying equipment was in operation until dismantling. Thanks to the excellent build quality, your materials will glide smoothly to their destination—even under heavy loads. Tailored solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a custom quote or advise you regarding system design or installation questions. Simply let us know your requirements and onsite conditions. Benefit from our many years of experience and excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, trades, and electronics. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable way. We can also supply fully automated sorting technology or supplementary components such as picking racks or containers.

Stanje: novo, Leto izdelave: 2026, Vaši kontaktni partnerji v našem podjetju G.: Andre Evering G.: Mario Klöver G.: Simon Blank Hjdodd Ewbepfx Alter Obseg dobave zajema: 01x Povišanje končnega stojala, novo Izvedba: univerzalna Barva materiala: RAL 1018 cink rumena Skupna višina: 650 mm Uporabna višina: 500 mm Teleskopsko: globina 600 - 1.150 mm Profil okvirja: 45 x 45 mm kotnik Rastriranje lukenj: 5 x 25 mm Premer lukenj: 30 x 10 mm Teža: 6,52 kg/kos Naše storitve na enem mestu: (Cene na povpraševanje) - Montaža, postavitev upoštevajte naše splošne montažne pogoje - Pregled regalov Pregled regalov po DIN EN 15635, opravljen v skladu z zahtevami BGR 234 vizualni pregled za vse regalne sisteme - Dostava z našim lastnim voznim parkom (brez razklada) Stroški dostave po povpraševanju!

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used rack impact guard for sale. Suitable for a double rack row: 2 x 1,100 mm rack depth + 200 mm rack connector Scope of delivery: 01x Impact guard rail, used Material color: yellow Total length: approx. 2,455 mm Total length without base plate: approx. 2,400 mm Suitable for a double rack row Total depth: approx. 150 mm Total height: approx. 315 mm Profile dimensions: U 100 x 50 x 10 mm Material thickness: approx. 8 mm Hole diameter: approx. 13 mm Required floor anchors: 8 pcs Hodpfx Aedz Uxqoltsr Our range of services at a glance: (Prices upon request) Assembly and installation Our general assembly conditions must be observed Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all rack systems Delivery with our own fleet (unloading not included)

Stanje: novo, skupna dolžina: 2.440 mm, skupna širina: 590 mm, skupna višina: 12 mm, Nous vous proposons ici des panneaux OSB en deuxième choix. (La livraison des panneaux se fait uniquement par paquet. L'achat à l'unité n'est pas possible.) La livraison comprend : Panneaux OSB, deuxième choix Numéro d'article : OSB10 Longueur totale : 2 440 mm Largeur totale : 590 mm Épaisseur : 12 mm Surface du panneau en m² : env. 1,44 m² Surface totale par paquet : env. 216 m² Exécution : rainure et languette Hjdpfxexxrhnj Altor Nombre de pièces par paquet : 150 pcs Prix de base / m² : 5,04 € Remarque : Il s'agit d'un lot spécial en deuxième choix, il peut y avoir des défauts sur les panneaux OSB. Vos interlocuteurs dans notre établissement : M. Falk Deutsch M. Mario Klöver M. Andre Evering Informations générales sur l'article : Cet article est disponible uniquement en enlèvement. Toute demande de transport ou d'expédition supplémentaire entraînera des frais additionnels, qui peuvent être déterminés séparément en fonction du lieu ou du volume de livraison.

Stanje: dober (rabljeno), Tehnični podatki o prečki za paletni regal: Sistem regala: Jung Heinrich Tip: MPB Vključeno v dobavo: 01x prečka za paletni regal, nova Barva materiala: vroče pocinkana Profil škatle: 160 x 50 x 1,75 mm Tip prečke: AUF'B'E0436 Agrafa: 4 HK (kljuke) Svetla širina: 3.400 mm Hedpfx Ajx Hpgyjltsr 02x varnostnih zatičev, rabljeni Izvedba: popolnoma pocinkani Za zavarovanje vzdolžnih nosilcev Proti nenamernemu dvigu Vaši kontaktni partnerji v našem podjetju: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Kakršnakoli dodatna želena dostava ali pošiljanje tega artikla je povezana z dodatnimi stroški, ki jih je mogoče pri nas posebej preveriti glede na kraj dostave oziroma obseg dobave.

Stanje: dober (rabljeno), Tehnični podatki o prečki za paletne regale: Regalni sistem: Jung Heinrich Tip: Esmena V dobavo je vključeno: 01x prečka za paletni regal, rabljena Barva materiala: zelena Škatlasti profil: 155 x 55 mm Kavlji: 4 kljuke Svetla razdalja: 3.610 mm Hjdpfow Upxwsx Altsr 02x varnostni zatič, rabljen Izvedba: popolnoma pocinkan Za zavarovanje prečk proti nenamernemu dvigu Vaši kontakti v našem podjetju: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo le za osebni prevzem. Želena dostava oz. pošiljanje tega artikla je povezano z dodatnimi stroški, ki jih je mogoče pri nas preveriti posebej glede na lokacijo dostave in obseg dobave.

Stanje: dober (rabljeno), Technické údaje k paletovému regálovému nosníku: Regalni sistem: Dexion Tip: Speedlock Super 4 V obseg dobave je vključeno: Hedpfxoxzqfke Altor 01x Paletni regalni nosilec, rabljen Barva materiala: sendzimir pocinkano Tip nosilca: SLB 110 Škatlasti profil: 110 x 50 mm Zaponka: 4 HK (kljuke) Svetla širina: 2.995 mm 02x Varnostni zatiči, rabljeni Izvedba: popolnoma pocinkana Za zavarovanje nosilcev proti nenamernemu dvigu Vaši kontakti v našem podjetju: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Če želite prevoz ali dostavo tega artikla, so s tem povezani dodatni stroški, ki jih je mogoče posamično preveriti glede na kraj dostave oziroma obseg pri nas.

Stanje: dober (rabljeno), Tehnični podatki za prečko paletnega regala: Regalni sistem: Polypal Tip: Stockpal Hodpfx Alsxz Aphstjr Obseg dobave: 01x prečka za paletni regal, rabljena Barva materiala: oranžna Škatlasti profil: 100 x 50 mm Tip: SKVBN 09850NP33 Agrafa: 3 HK (kljuke) Svetla širina: 2.700 mm Največja nosilnost na par prečk: 1.600 kg, pri enakomerno porazdeljeni obremenitvi 02x varnostni zatič, rabljen Izvedba: popolnoma pocinkan Za zavarovanje prečk pred nenamernim dvigovanjem Vaši kontakti v našem podjetju: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Dodatni prevoz oziroma pošiljanje tega artikla je mogoče za doplačilo, ki je odvisno od lokacije in obsega dobave ter ga lahko posebej preverite pri nas.

Stanje: zelo dobro (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Closure lid, 2nd choice Manufacturer: SSI Schäfer Lid type: VD-14/6-A Suitable for stackable container SSI Schäfer 14/6-A Material color: green Material: steel, painted Dimensions: approx. 520x320x35 mm (LxWxH) Net weight: approx. 2.481 kg 4 toggle latches General information about the item: This item is only offered for collection. Additional costs for transportation or shipping can be quoted separately upon request, depending on delivery location and scope. Our range of services: (Prices on request) Assembly and installation Please observe our general assembly conditions. Racking inspection Racking inspection according to DIN EN 15635, performed in accordance with the requirements of BGR 234, visual inspection for all types of racking systems. Delivery with our own fleet Hodohr I I Nepfx Altjr (unloading not included)

Stanje: kot nova (razstavni stroj), We are offering a second-choice column protector from manufacturer SSI Schäfer for sale. The scope of delivery includes: 01x Column protector, second choice Material colour: yellow Design: V shape Total height: approx. 750 mm Total width: approx. 124 mm Inner width: approx. 116 mm Total depth: approx. 65 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 4 mm Pitch/hole spacing: approx. 300 mm Number of holes: 06 pcs. (03 pcs. per side) Hole diameter: approx. 9 mm Hedpjhr U Trefx Altjr 06x Hexagon bolts: M8 x 35 mm 06x Lock nuts: M8 06x Washers: M8 General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be quoted separately depending on the delivery location and scope.

Stanje: kot nova (razstavni stroj), Technical data for the wide-span rack beam: Rack system: SSI Schäfer Type: WR 600 Included in the scope of delivery: 01x Wide-span rack beam, second-choice Material colour: RAL 5010 gentian blue Box profile: 60 x 40 x 1.25 mm Beam type: TR4-240-064-25CEL QV71|71|3 Clear span: 2,400 mm 02x Safety pins, used Version: fully galvanized For securing the longitudinal beams against unintentional lifting Hedpfx Ajhtippoltor General information about the item: This item is only available for collection. If transport or shipping of this item is required, it will incur additional costs, which can be individually requested from us depending on delivery location and scope.

Stanje: novo, Your contacts in our company: Hodsh Euqlspfx Altsr Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Workbench frame, new Material color: anthracite Overall width: approx. 1,400 mm Overall height: approx. 900 mm Overall depth: approx. 600 mm 01x Worktop, new Overall width: approx. 1,400 mm Overall depth: approx. 600 mm Notes: - Workbenches are picked and supplied unassembled General information about the item: This item is offered for collection only. Should transportation or shipping of this item be required, additional costs will apply, which can be quoted separately depending on delivery location and scope. Overview of our services: (Prices on request) Assembly and installation Please observe our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635 carried out in accordance with the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)