Čistilna Centrifuga Za Procesno Vodo nakup rabljenega (93.668)

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Used for horizontal wrapping of profiles, includes control cabinet with main switch for the system, infeed roller conveyor with movable side stop, pneumatically operated lifting device, control panel with emergency stop button, wrapping unit with height adjustment, outfeed roller conveyor. Connected load: 2.5 kW, length: 16,060 mm, width: 2,485 mm, height: 1,900 mm. Supplied with documentation, on-site inspection possible. Hjdpowbpy Nsfx Aqtst

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, With documentation and some accessories. An on-site inspection is possible, but not under power. Hedpforl Rbvjx Aqtet

Stanje: zelo dobro (rabljeno), Premer kolesa – maks. 175 mm Širina kolesa 350 mm Modul – maks. 3 Modul – min. 0,5 Hodpfxoznnito Aqtst Masa stroja pribl. 0,9 t Potreben prostor pribl. 1,2 x 0,8 x 1,4 m

Stanje: rabljeno, TECHNICAL DATA - Number of stations: 12 - Table indexing: 12 x 30 [°] - Collet type: SCHAUBLIN W25 - Max. clamping diameter: 25 [mm] - Max. workpiece length: 100 [mm] Hjdpfxeuhbwco Aqtot - Supply voltage: 3x 400 [V] - Installed power: 32 [kW] - Machine dimensions: 2700 x 2700 x 2500 [mm] - Weight: 4000 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT 5.07.018-4, capacity 4200 mm - Position 1: Cut-off - Position 2: Longitudinal drilling 30/60 - Position 3: Longitudinal drilling 30/60 - Position 4: CNC turning 2 axes - Position 5: Reversing - Position 6: Radial drilling 30/60 - Position 7: CNC turning 2 axes - Position 8: Angular drilling 30/60 - Position 9: Radial drilling 30/60 - Position 10: Angular drilling 20/50 - Position 11: Radial drilling 20/50 - Position 12: Longitudinal drilling 30/60 - Ejection between positions 12 and 1 - Workpiece conveyor belt - Chip conveyor KNOLL 450 K-1/2000 - Coolant tank KNOLL KTS-25-60-T - HP pump: 40 [bar] - Filtration KNOLL VRF 500

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 48 - Number of Stations: 16 - Number of Units: - Number of Units Possible Horizontally: 16 - Number of Units Possible Vertically: 7 - Max. Diameter: 45 [mm] - Max. Workpiece Diameter: 150 [mm] - Basic Unit GM50/150: * Z Stroke: 150 [mm] * Spindle Power: 5 [kW] * Spindle Speed: 0 - 8000 [rpm] - X/Y Slide: * X Travel: +/- 40 [mm] * Y Travel: +/- 20 [mm] - Dimensions: 14000 x 4800 x 3000 [mm] - Weight: 13 [t] - Operating Hours: 4283 [h] ACCESSORIES - CNC Control Bosch Rexroth INDRAMOTION MTX-L85 - Station 1: * Sawing Unit 52/100, 3 Axes - Station 2: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ (internal coolant supply) - Station 3: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ - Station 4: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ - Station 5: * CNC Slide 50/150 ref. 22.10.001-4 (2 axes) * CNC Unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 6: * CNC Slide 50/150 ref. 22.10.001-4 (2 axes) * CNC Unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 7: * Slide 50/150 manual adjustment ref. 22.10.002.1 Hjdpfou N Ivqsx Aqtot * Recessing Unit ref. 22.42.041.1 - Station 8: * CNC Slide 50/150 ref. 22.10.001.4 (2001) * CNC Unit 50/150 ref. 22.42.001.6 (with CNC turning function) - Station 9: * CNC Slide 50/150 ref. 22.10.001.4 * Sawing Unit ref. 22.42.039.2 - Station 10: * Slide 50/150 manual adjustment ref. 22.10.002.1 * Sawing Unit ref. 22.42.039.8 - Station 11: * CNC Slide 50/150 ref. 22.10.001.4 * Unit 50/150 ref. 22.42.001.6 (CNC turning function) - Station 12: * Slide 50/150 ref. 22.10.002.1 * Sawing Unit ref. 22.42.041.1 - Station 13: * CNC Slide 50/150 ref. 22.10.001.4 * Sawing Unit ref. 22.42.041.1 - Station 14: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) - Station 15: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Station 16: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Bar Feed Magazine Length: 4 meters - Coolant Tank KNOLL (2000 liters) with high pressure pump HP 60 [bars] - Chip Conveyor

Stanje: rabljeno, TECHNICAL DATA - Number of positions: 16 - Indexing time: 0.7 [sec] - Max. bar diameter: 32 [mm] - Clamping type: Collet VB 32 - Max. part length: 150 [mm] - Max. number of horizontal units: 16 - Max. number of vertical units: 8 - Max. total number of units: 24 - Electrical supply: 400 [V] - Installed power: 40 [kW] Hsdpfx Asuhbwijqtjt - Dimensions: 9.8 x 4 x 2.9 [m] - Weight: 6,500 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT - 2 CNC turning units (2 axes) - Parts conveyor belt - Chip conveyor - Coolant tank - Filtration

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of processing stations: 9 - Indexing time: 2 [sec] PROCESSING UNIT - Designation: UV151-3 - Number of units: 1 - Travel distance X/Y/Z axes: 110 / 150 / 135 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] PROCESSING UNIT - Designation: UV50-3 - Number of units: 8 - Travel distance X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: Electrospindle Ø38 * Number of spindles: 14 * Tool interface: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø38 * Number of spindles: 4 * Tool interface: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø120 * Number of spindles: 1 * Tool interface: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: Electrospindle with reduction gearbox Ø38 * Number of spindles: 2 * Tool interface: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] Hjdpfjv Rgy Hsx Aqtjt WEIGHT AND DIMENSIONS - Space requirement: 4600 x 3600 [mm] - Machine height: 3200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control system: Siemens - Coolant container - Coolant tank * with high-pressure pump - Chip conveyor - Oil mist extraction: ELBARON RON/A 120

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of machining stations: 9 - Indexing time: 2 [sec] MACHINING UNIT - Designation: UV151-3 - Number of units: 1 - Travel X/Y/Z axes: 110 / 150 / 135 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] MACHINING UNIT - Designation: UV50-3 - Number of units: 8 - Travel X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: electrospindle Ø38 * Number of spindles: 14 * Tool holder: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: electrospindle Ø38 * Number of spindles: 4 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: electrospindle Ø120 * Number of spindles: 1 * Tool holder: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: electrospindle with reduction gearbox Ø38 * Number of spindles: 2 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] WEIGHT AND DIMENSIONS - Required space: 4600 x 3600 [mm] - Machine height: 3200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES Hodpfx Ajv Rgyyoqtjt - Control: Siemens - Coolant container - Coolant tank *with high-pressure pump - Chip conveyor - Oil mist extractor: ELBARON RON/A 120

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 27 Hjdpfx Aqjw Huhcjtet - Number of Stations: 12 - Number of Machining Stations: 9 - Indexing Time: 2 s MACHINING UNIT - Designation: UV151-3 - Number of Units: 1 - Travel Path X/Y/Z Axes: 110 / 150 / 100 mm - Rapid Traverse Speed: 6500 mm/min - Resolution: 0.001 mm MACHINING UNIT - Designation: UV50-3 - Number of Units: 8 - Travel Path X/Y/Z Axes: 40 / 120 / 100 mm - Rapid Traverse Speed: 6500 mm/min - Resolution: 0.001 mm SPINDLES - Spindle Type: Electrospindle Ø38 * Number of Spindles: 14 * Tool Holder: ISO10 * Spindle Speed: 18,000 rpm * Spindle Drive Power: 0.25 kW - Spindle Type: Electrospindle Ø38 * Number of Spindles: 4 * Tool Holder: ISO10 * Spindle Speed: 9,000 rpm * Spindle Drive Power: 0.25 kW - Spindle Type: Electrospindle Ø120 * Number of Spindles: 1 * Tool Holder: HSK40 * Spindle Speed: 8,710 rpm * Spindle Drive Power: 3.8 kW - Spindle Type: Electrospindle Ø38 * Number of Spindles: 2 * Tool Holder: ISO10 * Spindle Speed: 9,000 rpm * Spindle Drive Power: 0.25 kW ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Connected Load: 10 kW WEIGHT AND DIMENSIONS - Required Floor Space: 4600 x 3600 mm - Machine Height: 3200 mm - Machine Weight: 13,500 kg - Accessories ACCESSORIES - Control: Siemens - Coolant Container - Coolant Tank with High-Pressure Pump - Chip Conveyor - Oil Mist Extraction: ELBARON RON/A 120 - Charger - Fire Extinguishing System - Posing

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: AGG0215 – Koda proizvajalca: 2-017-95-5550 – Stanje: rabljeno – Funkcionalnost: ni preizkušeno – Združljiva naprava: CNC HOMAG – WEEKE – Če ste zainteresirani, nudimo tudi storitev pregleda in popravila, kontaktirajte nas. Hjdpfjzmht Asx Aqtot

Stanje: rabljeno, številka stroja/vozila: 005448, Maks. širina panela: 3000 mm Maks. dolžina panela: 1350 mm Število injektorjev: 24 Hedpfx Aswcydzoqtst

Stanje: rabljeno, številka stroja/vozila: 008406, Največja širina panela: 1000 mm Hedpfxeyl Ihxs Aqtjt Največja dolžina panela: 2500 mm Število injektorjev: 12

Stanje: rabljeno, številka stroja/vozila: 007870, Največja širina panela: 3200 mm Največja dolžina panela: 800 mm Število agregatov: 2 Hodowimz Hepfx Aqtot Število injektorjev: 12

Stanje: rabljeno, številka stroja/vozila: 006158, Max. panel width: 1000 mm Max. panel length: 2500 mm Number of injectors: 14 Hjdpfx Aeiwptuoqtjt Positioning via NC control: yes

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Hedpfx Aqet Hw D Rstst Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Hodpfxet Hwxbs Aqtjt Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: dober (rabljeno), Leto izdelave: 2021, Offer 23053 Technical Data: - Load capacity per roller block: 2,000 kg Hodorl Iynspfx Aqtet - Roller dimensions: Ø 60 x 100 mm - 8 support rollers - Hydraulic lifting device stroke: 50 mm - Lifting device must be operated by a separate hydraulic power unit; hydraulic power unit and connecting hoses are not included - Space requirement: approx. W 800 x H 350 x D 600 mm - Weight (each): approx. 180 kg

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 29-0288, Offer 04612 Technical specifications: - Cutting capacity at 90° round: 260 mm - flat: 450 x 240 mm - Cutting capacity at 45° round: 230 mm - flat: 240 x 200 mm - Machine is mounted on original swiveling base - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure infinitely variable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement approx.: W 2100 x H 1200 x D 1000 mm - Weight approx.: 500 kg Hjdpfxsgin Nde Aqtot

Stanje: dober (rabljeno), Modul – maks. 2 Dolžina rezkalnika: 135 mm Skupna potrebna moč: 2,2 kW Masa stroja: pribl. 1420 kg Potreben prostor: pribl. 2,00 x 1,60 x 1,43 m --> Tehnični podatki: največji premer rezkalnika: Ø 150 mm --> največja dolžina rezkalnika: 135 mm --> največji modul: 2 --> premer vretena: Ø 24 mm --> vpenjalna priprava vretena: MK-4 --> hitrosti vretena: 140 – 1120 vrt/min. --> avtomatski pomiki Hedpszkvuvofx Aqtet Oprema in dodatna oprema: sistem za hlajenje, rezkalniki, zamenljiva kolesa, navodila za uporabo

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rezalnik Grasselli KSL 4 Ta rezalnik Grasselli KSL je horizontalni rezalni stroj, posebej zasnovan za rezanje mesa, perutnine, rib, zelenjave in sadja. Stroj lahko obdeluje tako sveže kot kuhano meso. Ta rezalnik je idealen za manjše in srednje velike obrate za predelavo hrane. Rezalnik združuje kompaktno zasnovo z visoko zmogljivostjo rezanja, do 2.000 kg/h. Zagotavlja zelo natančno rezanje in lahko obdeluje občutljive izdelke, ne da bi jih poškodoval. Ta horizontalni rezalnik je mogoče integrirati v proizvodno linijo za popolnoma avtomatiziran proizvodni proces. Higienska zasnova omogoča hitro in enostavno čiščenje. Stroj je v celoti izdelan iz nerjavečega jekla. Izdelek se na rezalni okvir transportira s transportnim trakom, pritiskni trak pa ohranja stabilnost izdelka med potekom skozi rezila. Tehnične specifikacije: - Proizvodna zmogljivost: do 2.000 kg/h - Največja višina izdelka: 100 mm Hedpfxeztxyas Aqtst - Delovna širina: 380 mm - Vključen rezalni set: 5 mm - Dodatne možnosti debeline rezanja: 2,5–10 mm, nastavljivo v korakih po 0,5 mm - Napetost: 400 V (3 + N, 50 Hz) - Moč: 5,8 kW - Leto izdelave: 2017 - Teža: 718 kg - Priključek za stisnjeni zrak: 7 bar - Dimenzije (Š x G x V): 1.490 x 1.840 x 1.350 mm

Stanje: dober (rabljeno), • Completely overhauled by us, immediately ready for use Hjdpfxjr Nvlde Aqtet • Type: 100013 • Serial number: 011136 • Glass thickness: 2-12 mm • Minimum glass dimension: 120 x 80 mm • Maximum washing width: 1000 mm • Dimensions: L=2900 mm W=1650 mm H=1250 mm • Roller spacing: 55 mm • 3 pairs of brushes / 1 pair of squeegees • Electrical connection: 380V/50Hz, 13 kW • Price on request

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter – max. 160 mm Wheel width 355 mm Module – max. 4.5 Module – min. 0.5 Centres distance 450 mm Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter – max. 160/175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivel 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices Hodpovz Ec Ijfx Aqtot Dra8M7 - Documentation

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere širina 2105 mm Mere globina 3485 mm Teža stroja 7500 kg Krmilna enota Znamka MAZATROL Glavni pogon Območje vrtljajev vretena 3500–5000 vrt/min Premer vretena 61 mm Število osi 4 Pomiki Pomik X-osi 530 mm Podajalna sila X-osi 0–6000 mm/min Hitri pomik X-osi 30 m/min Pomik Y-osi ±70 mm Podajalna sila Y-osi 0–6000 mm/min Hitri pomik Y-osi 15 m/min Pomik Z-osi 1065 mm Podajalna sila Z-osi 0–6000 mm/min Hitri pomik Z-osi 33 m/min Konjiček Premer pinole 80 mm Hod pinole 870 mm Stožec pinole MK4 Orodja Število postaj 20 Največja teža orodja 7 kg Hedpfxox D N Ipo Aqtet Največji premer orodja 90 mm Največja dolžina orodja 250 mm Ta 4-osni Mazak INTEGREX 200 Y je bil izdelan leta 2000. Odlikuje ga največji premer struženja 540 mm, premer zamaha 540 mm ter zmogljivost premera palice 51 mm. Stroj omogoča obdelavo kosov mase do 150 kg ter ponuja področje vrtljajev vretena do 5.000 vrt/min. Opremljen je z Mazak KM 63 sistemom za hitro menjavo orodij s 20 mesti. Če iščete visokokakovostne stružne zmogljivosti, razmislite o našem stroju Mazak INTEGREX 200 Y v prodaji. Za več informacij nas kontaktirajte. Vrsta uporabe Struženje

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Krmilna enota Znamka: MITSUBISHI Model: M70 Glavni pogon Število osi: 6 Hitrost vretena: 4000 obr/min Tehnične specifikacije Protipremerno vreteno: da Pogonska orodja: da Hjdpex D Iftsfx Aqtet Ta 6-osni Quick-Tech i60 twin je bil izdelan leta 2016 in vključuje CNC stružnico z B-osjo in pogonskimi orodji. Ima glavno vreteno z izvrtino 60 mm, pomožno vreteno z izvrtino 42 mm in največjo dolžino struženja 300 mm. Stroj omogoča simultano 4-osno obdelavo, popolno programiranje osi in ima krmilni sistem Mitsubishi M70. Izkoristite priložnost za nakup tega horizontalnega stružnega stroja Quick-Tech i60 twin. Za več informacij o tem stroju nas kontaktirajte. Uporabniške vrste Struženje

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Centrifugal Vertical Cantilever Pump Chemical Pump FIP ALFA 65-40 V2CM Year of construction: 2008 DN: 50 Rated flow: 40 m³/h Rated head: 45 m Pressure [bar]: 16 Temperature [°C]: -25 ÷ +140 Speed: 1470 rpm Electrical power: 16.5 kW Hjdpfxjh Rwbre Aqtst 400V 50Hz 34.7 A Motor speed: 1470 rpm Design: Vertical, axially split volute casing pump. Sump pump or channel impeller design. Applications: Handling of varnishes, aggressive liquids, and process fluids, even in the presence of suspended solid particles, for use in the chemical and petrochemical industries. Length: 1700 mm Width: 700 mm Weight: 450 kg