Vodoravni stroj za vrtanje in vstavljanje čepov

BIESSE TECHNO KS

Stanje: zelo dobro (rabljeno), PC control system type NC 400, Biesse software No. 2 throughfeed motorized conveyor belts Feed speed (m/min): 35 - 75 No. 2 horizontal drilling units Dowel insertion systems (with glue injection units) No. 5+5 Max. working width (mm): 3200 Min. working width (mm): 235 No. 6 lower vertical drilling units Drilling units per lower vertical drilling unit (No.): 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 continuous screws for chip removal Total connected load (kW): Gsdpfx Ajd Nuwieb Tjca CNC controls movement (X-axis) of horizontal drilling units CNC controls movement (Y-axis) of the stops

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Gedpjtyyn Hofx Ab Tjca Documentation available. On-site inspection possible.

Leto izdelave: 1998, Stanje: dober (rabljeno), I am selling a dowel drilling machine with dowel inserter KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Programming Gceded Exwgopfx Ab Tea CNC-controlled Z-axis Working width: 1200 mm Maximum working height: 36 mm Available for immediate sale

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-250-87-6869, Vrtalna glava z 8 vreteni (V8 SW/32) Gcjdpovtyc Hjfx Ab Tea Horizontalna vrtalna glava s 4 vreteni v smeri X Horizontalna vrtalna glava z 2 vreteni v smeri Y Žaga za utore D=100 mm (smer X) Zaporni cilinder za pozicioniranje obdelovanca Sistem za vpenjanje obdelovanca Dolžina obdelovanca 2500 mm Debelina obdelovanca 12–60 mm WOODWOP za stroj WOODWOP IMPORT DXF BASIC (1 licenca)

Stanje: rabljeno, številka stroja/vozila: 005521, Working area X-axis: 4000 mm Gcodpfx Aevctlgob Tea Working area Y-axis: 1400 mm Working table: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 24

Stanje: rabljeno, Keyway Spindle 1 pc. Number of Milling Units: 5 pcs. Spindle Diameter: 50 mm Control System: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC Spindles Machine is cleaned and fully inspected prior to delivery Technical Data Summary (Please enquire about any additional included accessories) Pos. 1: Cross-Cut Saw ----- > Number of Tools: 1 pc. > Spindle Speed: 2,800 rpm > Spindle Diameter: 40 mm > Max. Tool Diameter: 400 mm > Motor Power: 3 kW > Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding > Laser Guidance for cutting section detection Pos. 2: Rounding Unit, Horizontal Lower ----- > Position: horizontal, lower > Motor Power: 1.5 kW > Spindle Diameter: 20 mm > Clamping Length: 25 mm > Spindle Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment mechanically linked with cross-cut saw > Radial Adjustment pneumatically controlled, on/off NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and Keyway Spindle ----- > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 3,500 rpm > Max. Cutting Circle: 320 mm > Spindle Diameter: 50 mm > Max. Tool Diameter: 320 mm > Motor Power: 11 kW Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling) ----- > Position: vertical, right > Number of Tools: 1 pc. > Tool Clamping Length: 120 mm > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical, right > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 11 kW Gjdpfxevu Hghj Ab Teca 2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash Bar Guide consisting of: Guide rail at the stop (climb milling section), Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 6: Profiling Milling Unit, Horizontal Upper ----- > Clamping Length: 40 mm > Spindle Diameter: 40 mm > Motor Power: 3.0 kW > Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment: 30 mm, 8 positions > Radial Adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool Clamping Length: 160 mm > Axial Adjustment: 115 mm, 8 positions > Radial Adjustment: 110 mm, 8-position turret > Spindle Speed: 5,850 rpm > Spindle Diameter: 40 mm > Max. Cutting Circle: 210 mm > Motor Power: 3.0 kW Pos. 8: Profile Milling/Grooving Unit, Bottom ----- > Motor Power: 3.0 kW > Tool Clamping Length: 125 mm > ...

Stanje: dober (rabljeno), Leto izdelave: 2000, Clamping force: 100 tons Godpjrthkujfx Ab Toca Tie bar spacing: 420 x 420 mm Platen size: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm³ Shot weight: 127 g New temperature control board ARB 777 (cost: €2,750)

Stanje: rabljeno, Leto izdelave: 2011, skupna dolžina: 4.000 mm, skupna višina: 1.600 mm, skupna širina: 970 mm, Poids : 1 300 kg Prix : Sur demande - Année de fabrication : 2011 - Documentation disponible : Non - Marquage CE présent : Oui - Certificat CE présent : Non Gcedpfx Abjwnicke Tja - Numéro de série : AH/115214 - Nombre d’unités [pcs] : 6 - Épaisseur maximale du chant [mm] : 6 - Épaisseur maximale du panneau [mm] : 60 - Longueur minimale du panneau [mm] : 140 - Vitesse d’avance maximale [m/min] : 11 - Tension [V] : 400 - Consommation électrique [A] : 23 - Dimensions de transport : 4000 mm x 975 mm x 1600 mm (L x l x H) - Poids de transport [kg] : 1300 kg - Nombre de colis pour le transport [pcs] : 1 Informations financières TVA : Le prix indiqué s’entend hors TVA Déduction de la TVA : TVA récupérable pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Yorick Diebels

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, obratovalne ure: 58.263 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 203130, premer vijaka: 25 mm, delovna prostornina: 59 cm³, injekcijska masa: 54 g, Oprema: dokumentacija / priročnik, Here we offer, as a dealer of injection moulding machines, the following well-maintained used injection moulding machine: We are also actively purchasing well-maintained injection moulding machines manufactured from 2010 onwards. As a wholesaler of injection moulding machines, we have been in business for over 25 years. Manufacturer: Arburg Model: 320C 500-170 Serial number: 203130 Year of manufacture: 2007 Operating hours: 58,263 h Dimensions (L/W/H): 3.12 x 1.43 x 1.99 m Weight: 2,300 kg Functionality: Fully operational Condition: Very well maintained Extras: - Handling interface - Thermoplastic screw/barrel 25 mm, highly wear-resistant Gjdpjv U Tl Dsfx Ab Teca Control system: Selogica Injection unit: Screw diameter: 25 mm Shot weight: 54 g / PS Injection pressure: 2,500 bar Shot volume: 59 cm³ Clamping unit: Clamping force: 50 t / 500 kN Tie bar spacing: 320 x 320 mm Platen size: 446 x 446 mm Mould installation height: 200 mm Max. platen distance: 550 mm Ejector stroke / force: 125 mm / 30 kN Clamping unit: Hydraulic Drive power: 11 kW Heating power: 9.4 kW Total power: 21 kW The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - German language - From first ownership – origin Germany - Regular maintenance by manufacturer and previous owner Warranty: Warranty until initial commissioning Loading/Shipping: Loaded onto buyer’s truck free of charge, or delivered free to destination against freight reimbursement. Available immediately ex our warehouse in Hanover, Germany. Information about our offered machines and our company: - We only sell machinery purchased for our own ongoing production, directly from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods – we are NOT a broker dealing in third-party property - All machines offered come from successful companies where regular maintenance and care are standard practice - All offered machines can be inspected at our warehouse

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Gcedpeh Nypfefx Ab Tja