Ras Reinhardt Maschinenbau Gmbh Center Za Obdelavo Pločevine nakup rabljenega (116.189)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Krauchenwies
483 km
škarjasta dvižna miza
Reinhold Beck Maschinenbau GmbHTL 3000 Tandem
Pokliči
Stanje: novo, Leto izdelave: 2025, Two tables are connected in tandem operation for a combined load capacity of 5000 kg.
Technical description with the following main data:
Capacity: 3000 kg static distributed load
Lift stroke: 800 mm
Closed height: 240 mm
Total height: 1040 mm
Platform length: 1300 mm
Platform width: 1000 mm
Material: smooth sheet steel
Hjdpfx Afjk E Hmte Tsn
Lifting time: approx. 18 sec for full lift stroke
Lowering time: dependent on load
Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 meter cable
Motor: 2.2 kW, 1,400 rpm
Solenoid voltage: 24 V DC
Protection class: IP 54 overall, solenoid valve and switch IP 65
Paint finish: Steel blue RAL 5011
Power unit: integrated in the lift table
Control box: deadman control incl. 2 m cable
Total weight: approx. 330 kg
Tandem control for synchronized movement.
Note: 100% synchronization cannot be guaranteed.
Any height differences that occur will be compensated in the base or upper position!
The safety edge strips of the two lift tables are NOT interconnected.
Minimum distance of 500 mm between the lift tables.
Maximum distance of 3000 mm between the lift tables.
Self-supporting base frame with 4 flange wheels in which the lift table is mounted.
4 ball-bearing flange wheels, wheel Ø150/175 mm, heavy-duty version, made from turned C45 steel.
Height increased by approx. 50 mm.
Mali oglas
Krauchenwies
483 km
škarjasta dvižna miza
Beck Maschinenbau GmbHTT3000
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Lift table with integrated chain conveyor.
Load capacity: 3 tons.
Platform size: approx. 2500 x 1200 mm.
Technical specifications:
Single scissor lift table type TT3000Bsp.
- Load capacity: 3,000 kg
- Effective lift: 1,600 mm
- Closed height: 350 mm
- Platform size: approx. 3,200 x 1,200 mm
- Drive: hydraulic power unit with 2.2 kW motor
- Control: up/down via manual hand switch
Chain conveyor with 3 conveyor chains mounted on the lift table.
- Length: approx. 3,200 mm
- Distance between outer chains: 1,100 mm
- Drive: SEW gear motor, 1.1 kW
- Drive installed underneath the lift platform
- Conveyor chains: 3 x 1½" roller chains, German quality
- Conveyor speed: approx. 7 m/min
Hodpfx Afefhbupe Ton
- Robust cover plates between the conveyor chains, walkable, closed design
- Manual electrical control via hand-held deadman's switch, with forward/reverse function
- Installation height: approx. 300 mm
Subframe with adjustable feet allowing forklift access underneath with forks.
Total installation height: approx. 750 mm (1 unit = lift table + chain conveyor + base frame)
Mali oglas
Krauchenwies
483 km
Drsna namizna žaga Panhans 680/100
Hokubema Maschinenbau GmbH680/100
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), največja širina rezanja: 1.030 mm, premer žaginega lista: 450 mm, nastavitev nagiba žaginega lista: 45 °, vrsta nastavitve višine: električni, TECHNICAL DATA – Demonstration Machine from Showroom
Carriage length: 3,200 mm
Cutting length: 3,400 mm
Max. cutting height: 155 mm at 90° / 105 mm at 46°
Cutting width (rip fence): 1,030 mm
Saw blade max. Ø: 450 mm
Saw blade retractable under table: Ø 400 mm
Table size, cast iron top: 1,200 x 655 mm
Table extension: plus 750 x 655 mm
Table widening: 1,200 x 655 mm
Table height: 900 mm +/- 20 mm
Main saw blade speed: 3,000 / 4,000 / 5,000 / 6,000 rpm
Net weight: approx. 1,051 kg
TECHNICAL DESCRIPTION
Solid German engineering
Suitable for edging, cross-cutting, panel cutting, mitre cuts, etc.
Dimensionally stable, self-supporting machine body constructed as a robust welded steel frame from thick-walled steel profiles and laser-machined, mechanically finished steel sheet parts
Mounted on the machine body is a torsion-resistant, precision-planed cast iron table top
The robust, high-performance saw unit, integrated in the machine base, guarantees precise cutting results
The complete saw spindle unit is dynamically balanced. Double-guided swivelling segments made of grey cast iron with dual column guidance for height adjustment, and a long, double ball-bearing mounted circular saw spindle provide absolute smooth running
The double ball-bearing carriage is smooth-running and maintenance-free. Accurate, play-free operation over the full length, guided by hardened, precision-ground round steel rails with remote locking at 50 mm graduations
Stable yet lightweight crosscut carriage made from steel profiles with a carrying roller at the outer narrow side. The crosscut fence can be extended on the long side up to 250 mm
The length stop on the crosscut carriage with mm-scale and telescopic extension extendable up to 3,500 mm; with 2 sturdy, play-free adjustable stop flaps and 1 end stop with support for long strips; length stop can be used as an angle/mitre stop on both sides, continuously adjustable from 0° to 46° with mechanical length compensation. All common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set via a locking system
Rip fence with cutting width of 1,030 mm right of the saw blade, including fine adjustment, easy manual adjustment and locking, measurement readout on an easily legible mm scale on an adjustable rule carrier
Table widening 1,200 x 600 mm and table extension 750 x 655 mm
Operation on the machine body with 4.3" touchscreen control for cutting height, bevel adjustment and spindle speed
Electromotive height and tilt adjustment via push button
Saw blade swivel range: 0° – 46°
APA quick-release saw blade system
Main saw blade speed: 3,000 / 4,000 / 5,000 / 6,000 rpm
Protective device swivels to both sides; guard with interchangeable wide/narrow inserts for saw blades up to Ø 450 mm
Hedpfx Aogz Hx Djf Ten
Push-button control with electronic soft start (start/stop)
Electronic, wear-free motor brake
Saw blade Ø 400 mm retractable under table
Extraction ports: Ø 120 mm on machine body, Ø 80 mm on blade guard
Carriage, length and width fence profiles anodised
CE compliant
GS tested
Mali oglas
Krauchenwies
483 km
škarjasta dvižna miza
Beck Maschinenbau GmbHMuli LQ
Pokliči
Stanje: generalkompletno obnovljen (rabljeno), - Vzdolžno/prečno z ročnim in avtomatskim prestavljanjem
- Sprejem evro palete v vzdolžni in prečni smeri
- Nosilnost 1300 kg
Hsdpsiyyvhefx Af Ton
- Osnovne mere: 1430 mm širok, 1670 mm dolg, 1854 mm visok
- Izvedba: premičen
- Dvig: min. višina 80 mm, maks. višina 1030 mm, hod dviga 950 mm
- Barva: svetlo siva RAL 7035 v celoti
- Priključek: 440 V - 50 Hz, 1,5 ali 2,2 kW
- Lastna masa: 490 kg
Mali oglas
Krauchenwies
483 km
Škarjasta dvižna miza
Beck Maschinenbau GmbHTT 1500B
Pokliči
Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.950 mm, gradbena višina: 300 mm, dvižna višina: 1.650 mm, nosilnost: 1.500 kg, skupna masa: 450 kg, skupna dolžina: 2.500 mm, skupna širina: 800 mm, širina mize: 800 mm, višina mize: 1.950 mm, dolžina mize: 2.500 mm, transportna dolžina: 2.500 mm, transportna širina: 1.200 mm, širina platforme: 1.200 mm, dolžina platforme: 2.500 mm, zahteva za prostor dolžina: 2.500 mm, potrebna višina: 1.950 mm, potrebna širina: 1.200 mm, moč: 1,1 kW (1,50 KM), Oprema: dokumentacija / priročnik, Technical description with the following main data:
Load capacity: 1,500 kg static distributed load
Hedsuhphvepfx Af Tjn
Useful lift: 1,650 mm
Closed height: 300 mm
Overall height: 1,950 mm
Platform length: 2,500 mm
Platform width: 1,200 mm
Material: Smooth sheet metal
Lifting time: approx. 35 sec. for full stroke
Lowering time: load-dependent
Power connection: 3 x 400 V/50 Hz + protective earth, incl. 16 A CEE plug and 3 m cable
Motor: 1.1 kW, 1,400 rpm
Solenoid voltage: 24 V DC
Degree of protection: IP 54 overall, solenoid valve and switch IP 65
Paint finish: Dust grey RAL 7037
Power unit placement: integrated into the lift table
Control box: dead man's control incl. 2 m cable
Total weight: approx. 450 kg
Mali oglas
Krauchenwies
483 km
škarjasta dvižna miza
Beck Maschinenbau GmbHHubtisch
Pokliči
Stanje: novo, Leto izdelave: 2025, - Mobile scissor lift table with sturdy platform upper frame and a bolted-on beech workbench top
- Lifting operation (up/down) via hydraulic foot pump
- Load capacity: 350 kg
- Base height: 540 mm
- Useful lift: 610 mm
- Maximum height: 1150 mm
- Sturdy platform upper frame (970 x 590 mm) beneath the workbench top
- Heavy-duty scissor lift construction with finger protection
- Total weight: approx. 160 kg
- 2 swivel castors with brake, 2 swivel castors without brake
- Wheel diameter: 125 mm
- On each narrow side, 2 adjustable support feet with swivel foot plate and rubberised contact area. Thus, the lift table can be used as a stationary or mobile workstation.
- Powder-coated base frame and platform frame in light grey RAL 7035, scissors in violet blue RAL 5000
* Incl. widened foot pedal, enabling operation even when the table is fully lowered with the assembled workbench top.
Product data – Workbench:
Workbench made from solid beech (50mm thick), load capacity 200kg on the planing bench
Front vice approx. 520 x 70 mm
Front and rear vices fitted with spindles, ensuring precise and stable clamping jaw guidance
Rear vice and workbench top feature holes for bench dogs
Front edge of the workbench top: 130mm high
Bench drawer at the rear, running the full length of the workbench, for tool storage; includes 4 matching round bench dogs
Hjdpferr Twmox Af Tjn
Usable top length: 1,490 mm
Usable top width: 620 mm
Overall length: 1,700 mm
Overall width: 790 mm
Workbench top thickness: 50 mm
Front edge of workbench top: 130 mm high
Workbench top weight: approx. 90 kg
Mali oglas
Wesseling
789 km
Univerzalna vlečna rezalna naprava
Schwarmanns Maschinenbau GmbHEFM 26.1
Pokliči
Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.000 mm, skupna dolžina: 3.400 mm, skupna širina: 1.850 mm, skupna masa: 1.000 kg, dolžina mize: 2.500 mm, širina mize: 1.000 mm, hitrost rezanja: 10.000 mm/min, Zanesljiva in popolnoma delujoča univerzalna rezalna naprava. Letnik 2009, vključuje najnovejšo programsko opremo in popoln paket programov za razvitje. Takoj pripravljena za uporabo iz zaloge.
Proizvajalec: Schwartmanns Maschinenbau GmbH
Model: EFM 26.1
Letnik: 2009
Hjdpfx Aoy Idmdef Ten
Programska oprema: najnovejša različica (posodobljena do 2026) vključena
Obseg programov: vsi razpoložljivi programi za razvitje
Stanje: rabljeno, preverjeno v delavnici in popolnoma delujoče
Stroj se nahaja v našem skladišču v 50389 Wesseling in ga je možno pod napetostjo ogledati ter preizkusiti.
Mali oglas
Kołobrzeg
895 km
Stroj za sortiranje rib
Nordischer Maschinenbau Rud. Badeer GmbHBA 1800
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PA12704, 110610702, PA12707, mobilnost: mobilen, Badeer Fish Sorting Machine - complete documentation available in Polish and English.
The on-board computer operates on the MES – B’Logic software. It includes two modules: B’Logic Grading and the B’Logic label design program.
The set includes:
- CAB label printer,
- Feed hopper,
- Accelerating conveyor,
- Weighing machine,
- Sorting conveyor,
- PC computer
Hedpfoy Hiyasx Af Tsn
The computer located at the machine next to the label printer is a touchscreen unit, while the main computer for setting product specifications (for the product currently being processed) does not need to be placed at the machine.
Specifications:
- 100–120 fish per minute,
- Maximum fish size: Length – 350 mm, Width: 220 mm
- User-adjustable operating speed (as shown in the video),
- Airborne noise: < 70 dB
Machine dimensions:
Sorting section:
Height: 1.3 m, Length: 4.417 m, Width: 1.050 m
Belt width: 60.8 cm (S 800 seamless belt)
Power consumption: 0.37 kW
Steel quality: AISI 304
Drive: Worm gear motor
Feed hopper:
Height: 1.87 m, Length: 3.66 m, Width: 1.5 m
Belt width: 45.6 cm
Motor: Drum motor
Power consumption: 0.37 kW
Dynamic scale:
Belt width: 250/350 mm
Product weight: up to 1 kg (calibration possible)
Motor power: 0.18 kW
Speed: 0.25 m/s – 2.0 m/s
Mali oglas
Elz
702 km
Ročni upogibalnik cevi
Sommer MaschinenbauHRB3D
Pokliči
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Manual tube bender HRB-3D 850
Hodpfx Aettagdof Ton
For bending tubes and solid material up to max. 12 mm
Precise and repeatable bending is ensured by three battery-operated digital displays, which show the bending angle, tube feed, and tube rotation accurately.
- 3-jaw chuck, 80 mm
- Stop system for feed
- Feed length approx. 850 mm
The manual tube bender should be securely mounted on a workbench or frame (not included in the scope of supply).
We would be pleased to provide you with a detailed offer if you send us your complete company address along with email and contact person.
Mali oglas
Slovaška
322 km
Stroj za izpihovanje
Plastik-Maschinenbau GmbH
Pokliči
Stanje: dober (rabljeno), Výrobca: Plastik-Maschinenbau GmbH (PM)
Model: PM Wiska 30-25 D
Výrobné číslo: M0793
Krajina pôvodu: Západné Nemecko (Kelberg / Eifel)
Typ: Jednošnekový extrudér na plasty
Dokumentácia: Súčasťou je originálny nemecký manuál a korešpondencia z roku 1987
Stav: Použitý, ale kompletný a funkčný
Lokalita: Ivanka pri Nitre, Slovensko
Technické údaje (približne)
Priemer šneku: 30 mm
L/D pomer: 25 D
Hjdpfx Aexu E E Sef Ten
Hlavný pohon: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 ot./min.)
Prívod elektrickej energie: 3 × 380–420 V / 50 Hz
Napájacie napätie ovládania: 220 V
Chladenie: Sud vzduchom chladený so zónami ohrevu
Riadiaca skriňa: Súčasťou, kompletne vybavená relé, ističmi a analógovými meradlami
Popis
Kompaktný jednošnekový laboratórny alebo maloprodukčný extrudér, vyrobený spoločnosťou Plastik-Maschinenbau GmbH v Západnom Nemecku.
Navrhnutý na spracovanie termoplastov, testovanie materiálov, alebo pre malé extrúzne linky (napr. hadičky, profily alebo poťahovacie aplikácie).
Dodáva sa s originálnou elektrickou skriňou, manometrom a dokumentáciou.
Mechanicky aj elektricky kompletný; vyžaduje iba štandardné sprevádzkovanie.
Mali oglas
Wallern an der Trattnach
245 km
Stroj za pakiranje z zgornjim robom
Schuy + Folmeg Maschinenbau GmbHSchuypack
Pokliči
Stanje: nepreverjeno (rabljeno), Leto izdelave: 1995, used Giebel-type packing machine for filling milk cartons
1000 packs/h
0.25 L / 0.5 L / 1.0 L
for cartons without screw cap
Hsdpfehx D E Dex Af Ton
Mali oglas
Oberhausen
840 km
URBAN CNC obdelovalni center BZ 7000
Urban GmbH & Co. Maschinenbau KGBZ 7000
Pokliči
Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 6034, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 450 mm, pomik po osi Z: 590 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 25 m/min, hitri pomik na osi Z: 25 m/min, nazivna (navidezna) moč: 45 kVA, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: Bahnsteuerung iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 12.500 mm, skupna širina: 4.810 mm, skupna masa: 14.000 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 12.000 obr/min, obratovalni tlak: 7 letvica, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood).
Hjdpfx Aeyzxfnsf Tjn
URBAN CNC Machining Center BZ 7000
• Year of manufacture: 04/2008
• Control: HEIDENHAIN contouring control iTNC 530
• 4 axes
• Travel paths X / Y / Z axes: 7200 / 450 / 590 mm
• Working area X / Y / Z axes: 7000 / 400 / 350 mm
• Weight: 14 t
Equipment
- Robust base structure as a welded frame construction
- Linear ball guideways on all axes
- Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40
Drives:
- X-axis (50 m/min) by rack-and-pinion drive
- Y/Z axes (25 m/min) by ball screw drive
- B-axis 9,000°/min
- Swiveling operator panel
- Automatic central lubrication
- Traveling tool changer for 12 tool holders SK 40
- Coolant emulsion system
- Machine lamp
- Safety fence
- Electronic handwheel integrated into the control panel
- Chip drawers
- Laser scanner
- Minimum quantity lubrication
Technical Data
- Compressed air connection: R 3/8" / 6 bar
- Device connection: R 1/4"
- Operating pressure: approx. 6 bar
- Air consumption per cycle: approx. 600 l/min at 6 bar
- Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz
- Control voltage: 24 V DC
- Rapid traverse: X-Y-Z 50 – 25 – 25 m/min
- Infinitely variable feed: 0 – 5,000 mm/min
- Tool change: disc changer with 12 tool stations SK 40
- Tool holder: SK 40
- Tool clamping: hydraulic
- Coolant system: emulsion, 300 liters
- Spindle speed: 100 – 12,000 rpm
- Speed correction: 80 – 120%
- Drilling capacity in St 60 / Al: up to 28 mm Ø
- Thread cutting capacity in St 60 / Al: up to M24
- Position measuring system: rotary encoder/length measuring system
- Positioning accuracy: 0.025 mm
- Repeatability: 0.015 mm
- Control: HEIDENHAIN iTNC 530 M, 4 controlled axes
- Data interface: V 24/RS - 232 - C
- Travel paths X / Y / Z axes: 7,200 / 450 / 590 mm
- Working area X / Y / Z axes: 7,000 / 400 / 350 mm
- Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m)
- Machine weight with accessories: approx. 14 t
- Sound emission: average sound pressure level 79 dB (A)
Mali oglas
Sachsenheim
557 km
Hidravlični kabelski vitel radio 1700 kg vleka
HOLZHÄUER Maschinenbau GmbHHAW1700-EV-Funk
Pokliči
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina vrvi: 30.000 mm, hitrost vrvi: 47.000 mm/min, številka stroja/vozila: HAW1700-EV-Funk, Hydraulic cable winch for log splitters, cranes, mini-excavators, tractors, vineyard and horticultural machines, and many other applications. With the hydraulic auxiliary winch, you can make many tasks easier:
- Pull and position firewood for the log splitter
- Load logs onto trailers
- Extract root stumps and trees
- Serve as an auxiliary winch for forestry cranes and small excavators
- Winch for compact tractors and narrow-track tractors
Robust steel construction with three-sided mounting options (left, right, rear) and 12 threaded holes, offering flexible mounting possibilities (threads are cut and painted; for corrosion protection, they should be re-tapped before use). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for prolonged cable life. We supply hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pull force.
Maximum working pressure: 225 bar peak
Continuous pressure: 175 bar
Displacement: 400 ccm
Torque at 225 bar: 870 Nm peak
Hsdjdf Ufpjpfx Af Ten
Continuous operating torque: 380 Nm
Maximum pulling force: 1700 kg
Weight: 49 kg
Cable speed: 47 m/min at 60 L/min hydraulic oil flow
Colour: red
Dimensions:
Length: 500 mm
Length with pendulum: 570 mm
Front width: 120 mm
Rear width: 180 mm
Bearing width: +30 mm
Motor width: +200 mm
Height: 250 mm
The winch is available for bolt-on or weld-on installation. This version is equipped with an electric hydraulic valve, radio remote control, and hoses to the motor.
Article number: HAW1700-EV-RC
Mali oglas
Alfdorf
496 km
Težka prikolica
Stapler Center Fritz GmbHTPW 30 AL - AS - NF
Pokliči
Stanje: novo, Leto izdelave: 2023, Industrial heavy-duty trailer with a payload of 30 tons over 60% of the loading area at 6 km/h. The trailer is equipped with heavy-duty Vulkollan tires and has a loading platform height of 510 mm. The loading area measures 6000 x 2400 mm. The transport deck is fitted with 40 mm thick spruce planking. The trailer features all-wheel steering, and the tow bar is 1600 mm long with a safety catch and a forged towing eye with a 40 mm diameter hole. There are 6 load securing brackets on each longitudinal side of the outer frame. The paint finish is available in RAL 2000 or RAL 2004; for new production, custom colors can be accommodated upon request.
Hjdpfskz Uyujx Af Tsn
Mali oglas
Krauchenwies
483 km
Quattra Classik SK
Reinhold Beck Maschinenbau GmbHQuattra
Pokliči
Stanje: novo, Leto izdelave: 2024, - Frame and edge press, single-sided/stationary
- Usable dimensions in mm as frame press: 2630 x 1610
- Usable dimensions in mm as edge press: 3000 x 1610
- External dimensions in mm: 3200 x 2090 x 730
- Sturdy welded frame construction made from thick-walled profile tubes and laser-machined steel components ensure a torsion-free and dimensionally accurate press base frame (no bolted frame parts!)
- With left-hand support, sliding carriage for width adjustment, central locking system, and 2 manual hydraulic press units with ergonomic handle
- 3 roller-mounted, vertical pressure beams type SK made of thick-walled, electro-galvanized profile tubes with manual hydraulic press units incl. ergonomic handle. 20,000 N pressing force, 60 mm stroke. Press units adjustable in 50 mm hole grid.
- Lower support with anti-fall safety feature, adjustable in 5 positions within a hole grid
- Hold-down device with spindle pressing force
- Chassis with 4 swivel castors (2 pcs. braked)
Hedpfxohd Nywe Af Ten
- Powder-coated (glue-repellent) grey-white RAL 9002 pressure plate and support, gentian blue RAL 5010
- Quattra 1-SK version is equipped with comfort adjustment for the manual hydraulic press units and thus provides additional safety for the operator
Mali oglas
Güntersleben
561 km
Vrtljivi upogibni stroj Nožnice za plošče
Schechtl RAS Reinhard MaschinenbauHA & 82.25
Pokliči
Stanje: dober (rabljeno), You are bidding on: a branded machine - folding machine, from a reputable and well-known manufacturer - Schechtl HA, and a guillotine shear RAS Reinhard Maschinenbau Sindelfingen
Features of the equipment:
Folding machine
- Rail bends cleanly – test possible
- Degree indicator
- Bending length: just over 2.5m
- Sheet thickness: 1.5 mm (iron sheet, aluminum, zinc, etc.)
- Standard rail
- Foot-operated closure
- Current new price approx. €20,000 net
Guillotine shear RAS
- Electric guillotine shear for up to 2mm iron, aluminum, etc.
- Cutting length: 2.5m
- Auxiliary table for special work included in the price – mounts on the left side
- Optional spare blades
- Adjustable depth gauge from the front
- Many additional tools and accessories available on site as options
- Machines can also be purchased separately
Important!
Additionally, you can find and purchase many machines and machine accessories such as different rails, depth gauges – everything you need for sheet metal and steel processing: folding machines, guillotine shears, drills, roll bending machines, slitting and profiling machines, accessory parts (beading devices, grooving rollers for gutter forming, back gauges, etc.), as well as various hand tools and spare parts from many top manufacturers in our shop. I am always available for any questions.
You will receive an invoice according to § 25a UStG (German VAT differential taxation law). VAT is included in the invoiced amount (differential taxation).
Free loading possible – weight approx. 1900kg for folding machine, 1600kg for shear.
Inspection and test after prior appointment by phone are possible and encouraged.
Payment in cash upon collection. Benefit from our experience and expertise, we are happy to advise you.
Hsdpfeyqytqsx Af Ten
Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction.
Location: 97249 Eisingen, about 3 minutes from the A3 and A81 motorways.
Item number: Folding machine RAS 251009
Mali oglas
Oebisfelde
757 km
Škarje za giljotino
Wieger Maschinenbau GmbHSW 3a
Pokliči
Leto izdelave: 1972, stanje: nepreverjeno (rabljeno), številka stroja/vozila: SW3a DP. U. AP. 40923 , Guillotine Shear:
Hedpfx Ajd Eg Ngsf Ten
A used guillotine shear (swing beam shear) by manufacturer Wieger. On this shear, the blade gap does not need to be adjusted when cutting different sheet thicknesses.
Max. cutting capacity: 10 mm
Model/Type: SW3a DP. U. AP. 40923 (with lamellar working clutch with brake, electro-pneumatically operated)
Year of manufacture: 1972
Condition: unchecked - used
Mali oglas
Alfdorf
496 km
Težka prikolica
Stapler Center Fritz GmbHTPW 30 AL- PA
Pokliči
Stanje: novo, prva registracija: 07/2025, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.200 mm, barva: oranžna, Leto izdelave: 2026, obratovalna teža: 30.000 kg, TPW 30 AL - PA z vsem kolesnim krmiljenjem in nihajnimi osmi
Dimenzije
Dolžina: 6000 mm
Širina: 2200 mm
Pnevmatike: Obroči 425x305, 2x150 dvojna kolesa, 8-krat obuti
Vlečna drog z vlečno uho 40 mm in nastavitvijo višine z varnostnim zaklepom
Hedshbq Izepfx Af Ton
Transportno dno iz lesa (40 mm Douglazija)
Barvanje: RAL 2000
Ograničevalniki na vsaki vzdolžni strani po 4 kosa, v skladu z varovanjem tovora
Mali oglas
Alfdorf
496 km
Transportna prikolica, prikolica za velike obremenitve,
Stapler >Center Fritz GmbHTPW 8000 AL - AS
Pokliči
Stanje: novo, lastna masa: 2.000 kg, največja dovoljena obremenitev: 8.000 kg, skupna masa: 10.000 kg, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.000 mm, skupna višina: 540 mm, barva: oranžna, Leto izdelave: 2026, TPW 8000 AL - AS Industrial Heavy-Duty Transport Trailer
Length: 6000 mm, Width: 2000 mm
Hodpfxehbicwj Af Tsn
Payload: 8000 kg
All-wheel stub axle steering, 30 mm wooden transport floor, drawbar 1150 mm with 40 mm pin, bandage wheels 425x150, painted in RAL 2000. Double-acting wheel chock, 6 stop blocks per side for load securing.
Mali oglas
Alfdorf
496 km
Težka prikolica
Stapler Center Fritz GmbHTPW 40 AL-PA-AW
Pokliči
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0684, lastna masa: 4.000 kg, največja dovoljena obremenitev: 40.000 kg, skupna masa: 44.000 kg, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 780 mm, velikost pnevmatike: 405x260, stanje pnevmatik: 100 odstotek, Leto izdelave: 2026, Transportni voziček TPW 40 AL-PA-AW
Tip: TPW 40 AL-PA-AW
Serijska št.: 0800
Leto izdelave: 2026
Nosilnost: 40.000 kg na 60 % nakladalne površine pri 6 km/h
Dimenzije:
Dolžina nakladalne površine: 4000 mm
Širina: 2200 mm
Višina: cca 760 mm
Krmiljenje: vsa kolesa krmiljena – nihajna os – osna gugalnica
Oprema pnevmatik: 16 koles za težke tovore 405-260
Vlečna oje: dolžina vlečne oje 1800 mm z varovalom proti zdrsu in vlečno zanko po DIN za zatič 40 mm
Barvanje: RAL 2000
Transportno dno: 50 mm duglazija-macesen, ugreznjeno pritrjeno v okvir
Hedpfx Afefxgxns Ten
#Težki transport #Notranji transportni sistemi #Prikolica za težke tovore 6-100 ton #Prikolica za težke tovore od 3 do 100 ton #Platformni voziček za težke tovore #Platforma za težke tovore #Krmiljenje vseh koles #Transportni voziček
Mali oglas
Eisenberg (Pfalz)
641 km
Škarje za giljotino
RAS GmbH86.33
Pokliči
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, Used swing beam guillotine shear RAS 86.33 with newly ground upper and lower blades, regularly serviced and barely used.
Technical Data:
Hjdpfx Afsv Tk Exe Tsn
Year of manufacture: 2008
Weight: 6,800 kg
Max. sheet thickness at 400 N/mm²: 6.3 mm
Working length: 3,190 mm
Back gauge depth: 5-1000 mm
Working height: 800 mm
Strokes per minute: 30-64 spm
Connections: 400 V / 50 Hz / 40 A
3 PE / three-phase AC
Power consumption: 18.5 kW
Machine width: 3,830 mm
Machine depth without angle gauge: 2,195 mm
Machine depth with angle gauge: 3,275 mm
Machine height: 1,725 mm
Air pressure: 5 bar
Frame throat: 100 mm
Tank capacity: 150 l
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Allendorf (Eder)
714 km
Brusilnik z dolgim trakom
KBM Maschinenbau GmbHM2S92-150
Pokliči
Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 9.000 mm, vrsta nastavitve višine: električni, hitrost brusilnega traku: 25 mm/s, skupna višina: 2.200 mm, skupna dolžina: 4.640 mm, skupna širina: 2.650 mm, skupna masa: 1.200 kg, dolžina brušenja: 2.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 4.640 mm, potrebna širina: 2.650 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinder M2S92-150 with two sanding belts for manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass.
Not for use with aluminum or titanium!
Scope of delivery includes:
- Machine stand with connecting elements
- Belt drive
- Pneumatic belt tensioning and manual belt tracking adjustment
- Sanding unit with contact roller, manually shiftable from belt 1 to belt 2
- Electric table elevation
- Flat machine table
Hjdpev S Sr Rofx Af Ton
- Workpiece stop ruler on the machine table
- Initial set of sanding belts
- CE-compliant design
- Operating manual + manufacturer's declaration according to Annex 2
The robust, welded steel frame construction provides exceptionally smooth machine operation. Both machine stands feature offsets that enable processing of longer workpieces. The three-roller belt guidance offers the operator the largest possible open work area, allowing comfortable handling especially with hand sanding blocks. Belt drive is provided by a three-phase motor and balanced drive roller. Each belt is individually adjustable via separate pneumatic tensioners, allowing optimal belt tensioning force per belt. The dust extraction system is dimensioned to effectively capture sanding dust and direct it to the extraction nozzle when attached to a suitable extraction unit. The sanding unit is mounted on play-free roller guides, ensuring low-fatigue operation. The machine table height is easily and quickly adjustable via the electric motor-driven table lift. The table lift guide components are maintenance-free. For loading, the table can be extended so that workpieces do not need to be inserted under the sanding belt. Main control elements are ergonomically positioned in the center of the machine for ease of operation.
Machine color:
RAL 9001 cream white and RAL 5003 sapphire blue
Control cabinets and small housings in 'Light Grey'
The standard configuration is supplied with two initial sanding belts (W x L) 150 x 9000 mm and a contact roller approx. 50° Shore hardness for 150 mm belt width.
Additional accessories:
3-axis table with integrated handling device for rotating and swiveling workpieces.
The handling device is mounted at the table center beneath the insert frame. To use the handling device, the insert frame is removed from the machine table. The handling device features four vacuum suction pads for holding workpieces and includes: the mounting with rotary axis (with brake disc mounted on the rear). At the front of the rotary axis is the swiveling unit, lockable at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disc on the swivel head enables fine adjustment of the workpiece to the sanding belt. Rotation and swivel axes are pneumatically released via foot switch, with manual rotation of the axis. Maximum workpiece weight when used as a flat table with the insert frame = 80 daN; with handling device on the clamping plate = 25 daN or 120 Nm in relation to the rotary axis center.
Mali oglas
Allendorf (Eder)
714 km
Brusilnik z dolgim trakom
KBM Maschinenbau GmbHMS93-150
Pokliči
Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 7.000 mm, vrsta nastavitve višine: električni, skupna višina: 2.200 mm, skupna dolžina: 3.550 mm, skupna širina: 2.000 mm, skupna masa: 870 kg, dolžina brušenja: 1.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 3.550 mm, potrebna širina: 2.000 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinding Machine MS92-150, 3-roller redirected belt 150x7100
For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass.
Hodpfx Afjtwb U Ao Tjn
Scope of delivery includes:
- Machine stand with connecting elements
- Infinitely variable belt drive
- Pneumatic belt tensioning and manual belt tracking adjustment
- Grinding unit with contact roller
- Electric table lift
- Flat machine table
- Workpiece stop ruler on the machine table
- Initial equipment sanding belt
- Operating manual + manufacturer's declaration
- CE version
The robust machine frame is a welded steel construction ensuring exceptionally stable and low-vibration operation. Both machine stands feature an offset design, allowing processing of parts longer than the machine table itself. The grinding belt is guided over three deflection rollers, providing the operator with the largest possible, open working area—ideal for working with hand sanding blocks. Belt drive is provided by a three-phase motor with a dynamically balanced drive roller. The belt features adjustable pneumatic tensioning. The dust extraction unit is dimensioned to efficiently capture sanding dust and direct it to the extraction nozzle, provided it is connected to a suitable extraction system. For effortless operation, the grinding unit is mounted in play-free linear guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be slid under the sanding belt during setup. The main electrical controls are user-friendly and centrally located on the machine.
Machine color:
RAL 9001 cream white and RAL 5003 sapphire blue
Control cabinets and small housings in "light grey"
The machine comes standard with an initial equipment belt (WxL) 150 x 7100 mm and a contact roller, approx. 50° Shore hardness for 150 mm belt width.
Additional accessories:
3-axis table with integrated handling device for turning and swiveling workpieces.
The handling device is centrally mounted under the table’s insert frame. To operate the handling device, the insert frame is removed from the machine table. The device is equipped with four vacuum suction cups for securing the workpieces and consists of: a bearing with rotary axis (with a brake disc on the rear side), and a swivel device affixed to the front of the axis. The swivel can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disk on the swivel head allows fine adjustment of workpieces relative to the grinding belt. The rotary and swivel axes are pneumatically unlocked via foot switch, axis movement is manual. Maximum workpiece weight when used as a flat table with insert frame: 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate): 25 daN or 120 Nm relative to the rotary axis center.
Mali oglas
Krauchenwies
483 km
Rob robni tiska
Beck Maschinenbau GmbHMOBIL 2500
Pokliči
Stanje: novo, Leto izdelave: 2024, MOBIL 2500
Mobile Pneumatic Edge Press for Furniture Manufacturing!
Technical Data MOBIL Type 2500 (Type 3000):
> Sturdy welded-frame construction made from rectangular hollow sections with stop and straightening guide, suitable for solid wood, veneer, and plastic edges.
> Integrated electric heating rod made of durable AL alloy, cross-section 64 x 46 mm, adjustable from 50 - 248°C, power 1200 (1450) watts.
> 4 (6) clamping and pressing units, each with 7-fold ball bearing guidance. Each pressing unit features one clamping and one pressing cylinder; gluing width adjustable via moveable straightening guide from 12 - 105 mm. Edging thickness up to 50 mm for solid wood edges.
> Adjustable counter-stops ensure precise edge overhang.
Hsdpfx Afsyuv Ts Tjn
> The clamping cylinders and counter-stops are equipped with rubber pads. The stop and straightening guide have a special glue-repellent coating.
> The pneumatic pressing units can always be actuated in pairs, with one switch for 'clamping the workpiece' and one switch for 'pressing'.
> Press is mobile with 4 swivel casters, 2 of which are braked.
> The press is equipped with a pneumatic maintenance unit, 3/8" connection, adjustable from 3-10 bar. Electrical connection for heating rods is 230 V, 50 Hz, 1200 (1450) watts.
Usable dimensions W x H x D in mm: 2500 x 50 x 105
External dimensions W x H x D in mm: 2700 x 1200 x 850
Additional options and accessories for MOBIL available on request!
Packaging: €92
Mali oglas
Krauchenwies
483 km
Quattra Junior
Reinhold Beck Maschinenbau GmbHJunior
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, - One-sided/stationary frame and edge press
- Gluing stand without frame press device
- Working dimensions in mm as edge press: 2900 x 1600
- Working dimensions in mm as frame press: 2600 x 1600 (with option QJ 002)
- External dimensions in mm: 3100 x 700 x 2150 (LxWxH)
- 3 vertical, roller-bearing pressure beams with robust bevel gear units and abutments
Hedpfx Afshd N Eqe Tjn
- Press stroke: 150 mm, pressing force: 2000 kg
- Frame press device with left-hand abutment
- Sliding carriage for width adjustment, with central locking system
- 2 pcs. horizontal bevel gear units
- Hold-down device with spindle pressing force
- Undercarriage with 4 swivel castors (2 of them braked)
- Finish: RAL 9002 grey-white, pressure plate and abutment RAL 5010 gentian blue
Olajšamo vam iskanje: "ras reinhardt maschinenbau gmbh center za obdelavo pločevine"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
























































































































