Nanjing Asia Machine Mfg. Co., Ltd. Yq32-315 Four-Column Hydraulic Press nakup rabljenega (94.884)

Stanje: rabljeno, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture: approx. 1977 Rated pressing force: 63 t Pressing force: 50 tonnes (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. daylight opening: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 l Drive power: 15 kW Power connection: 380 V, 50 Hz - Hydraulic drawing cushion beneath the table with bored holes through the table plate - Two-hand operation - Electrical control cabinet damaged Space requirement (L x W x H): 2000 x 1200 x 3420 mm Weight: approx. 5 t Bdsdedzp Trspfx Akroc The machine is operational, but the control cabinet is mechanically damaged. During test operation, the machine achieves a pressing force of 50 tonnes; it is presumed that a pressure relief valve is opening.

Stanje: rabljeno, Single-column Eccentric Press RICHTER Type PEKRS 80 Year of manufacture: 1970 – Refurbished in 2024 Press force: 80 tons Throat depth: 350 mm Table size: 900 x 650 mm Pass-through hole in clamping table: Ø 200 mm Ram surface: 700 x 500 mm Strokes per minute: 70 spm Stroke adjustment: 6 – 100 mm Ram adjustment: 85 mm Max. installation height: 400 mm Clamping shank bore: Ø 50 mm Table height above floor: 810 mm Motor power: 8 kW Power supply: 400 V, 50 Hz - Pneumatic clutch/brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic counterbalance cylinders - Overload protection with rupture disk in the ram - Central lubrication system with hand pump Space requirements (L x W x H): 1800 x 1250 x 2830 mm Weight: 5.7 t Very good condition Technically overhauled and retrofitted with new electrics to the latest UVV standards Control system retrofit in 05/2024 – suitable for manual loading operations – according to DGUV Information 209-030 (Press Inspection) as well as Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools – Presses – Part 1: General safety requirements EN ISO 16092-2: Machine tools – Safety of presses – Part 2: Mechanical presses - Operator panel with plain-text fault diagnostics and diagnostic screen for fast error localization - New electrical cabinet, side-mounted on the machine - Control system fully based on SIEMENS, featuring S7-1200 PROFIsafe PLC and 7” TFT touch display - Two-hand control panel with emergency stop and anti-tie-down circuit - Electric foot switch - Cam controller with monitoring function - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure scale - Complete machine rewiring - Updated operating manual The machine is equipped with 6 operating modes: Bsdpfx Aoi Db Ibekrjdc 1 = Setup 2 = Single stroke, two-hand operation 3 = Single stroke, foot operation 4 = Continuous run, foot operation 5 = Automatic continuous run 6 = Reverse run

Stanje: rabljeno, Single-Column Hydraulic Press with Drawing Cushion RÖCHER Type REP 100.01 SZ Hydraulic Drawing Press Machine No. 15,499 Year of manufacture: 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with through-hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tons (400 kN) Drawing cushion stroke: 200 mm Drawing cushion surface: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Max. hydraulic operating pressure: 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Electrical connection: 400 Volt, 50 Hz (63 Amps) - Operation and programming via control panel PC 670 touch panel, keyboard and mouse - Machine control via Siemens S7-300 PLC - Ram stroke and pressing force programmable via the control system - Drawing cushion with drawing and ejector function - Drawing cushion force infinitely adjustable - Ram and drawing cushion fitted with direct travel measurement systems Bsdpeyupulsfx Akrsdc - Drawing cushion can be moved in and out under the press area, for punching operations using the through-hole - Floor-level installation, drawing cushion does not extend into the floor - Pressure and travel shut-off - Fixed stop with indirect measuring system - Pressure holding time infinitely programmable - Table surface with holes for drawing cushion ram rods - Ram with ejector - Cutting stroke damping - Stroke release via two-hand operation, foot switch, hand lever, and push button on the control panel - LEUZE light barrier as reach-in protection in safety mode - Front mirror columns on the press table laterally adjustable - Electrical control cabinet mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose lines for tool temperature control or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirement for the press (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Stanje: rabljeno, Hydraulic Parallel-Motion Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Side opening between uprights: 650 mm Table size: 1560 x 1010 mm Ram area: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. daylight: 775 mm Table height above floor: 1000 mm Guide column diameter: 140 mm Clamping pin bore on ram: 64 mm Pressing speed: 0 to 10 mm/s, infinitely variable Return speed: 0 to 20 mm/s, infinitely variable Main motor power: 22 kW Control pump motor power: 5.5 kW Electrical connection: 400 Volt, 50 Hz Bdedpfx Akjwva I Horoc - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision parallel-motion control - Infinitely variable electrical stroke limitation (upper and lower, with digital travel measurement and position display) - Mechanical safety upholding device (prevents ram from lowering due to its own weight) - One-hand and two-hand operation - Electrical tool safety via signal contact - Pressure preset independent of stroke (via keyboard, digital pressure display) - Travel measurement system left and right with rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swivel-mounted screen - Stroke movement and press speed controllable via joystick - Separate hydraulic unit with electrical cabinet - Hydraulic draw cushion under press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required for press, upright: L x W x H = 1800 x 1010 x 3470 mm Space required for horizontal transport: L x W x H = 3500 x 1800 x 1200 mm Press net weight: 13 tons Space required for hydraulic unit: L x W x H = 1000 x 800 x 3040 mm Hydraulic unit net weight: approx. 1 ton The machine was used as a tool trial press in a toolmaking facility. Very good condition.

Stanje: rabljeno, Hydraulic Notching Machine with Angle Adjustment SIMASV Type AV 220-6PA Serial No. C1524 Year of Manufacture: 1996 Blade Length: 220 mm Material Thickness (Steel): 6 mm Material Thickness (Stainless Steel): 4 mm Table Dimensions: 950 x 790 mm Table Height: 940 mm Motor Power: 3 kW Power Supply: 400 Volt, 50 Hz - Operation via pushbutton or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment by two hand cranks for right and left - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop bars with degree graduation - Multiple mm measuring scales integrated in the table top - HSS blades newly ground, as new condition Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition Bdodpfx Aorzfh Hokroc

Stanje: rabljeno, Double-column hydraulic press SMG Type HBP 200 - 2000 / 2000 Bjdpfxedzp Tce Akrjdc Serial No. 7.4117 Year of manufacture 1986 - rebuilt in 2000 Pressing force: 200 tons Frame opening (front): 2050 mm Frame passage (side): 2030 mm Table size: 2800 x 2000 mm Ram area: 2000 x 2000 mm Ram stroke: 700 mm Maximum installation height: 1850 mm Table height above floor: 750 mm Ram return force: 33 tons Rapid approach speed: 500 mm/s Pressing speed: 72/36 mm/s Return speed: 420 mm/s Safety distance: 230 mm Main motor power: 75 kW Control pump motor power: 11 kW Mains connection: 380 Volt, 50 Hz - 8-way flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in upper dead center - Position measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS PLC S7 - Free-standing control cabinet - 2-hand control panel, free-standing - Floor-level installation - Central lubrication - Operating manual with circuit diagrams Space required for press (upright), L x W x H: 3700 x 2900 x 5900 mm Overall machine height with motor: 5900 mm Space required for horizontal transport, L x W x H: 5900 x 3250 x 2950 mm Weight: 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000 onwards, the machine was used as a try-out press in a toolmaking facility. Good condition.

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), V ponudbi je hidravlična štiristebrna stiskalnica. Razdalja med stebri: 570 mm, dimenzija mize: 392 × 238 mm, sila batnice (držanje): 3500 kN, hod batnice (držanje): 50 mm, sila batnice (ločevanje): 2500 kN, hod batnice (ločevanje): 100 mm, vgradna višina: 553 mm, rezalni hod: 20 mm, delovna hitrost: maks. 30 mm/s, krmiljenje: PLC. Opremljena s črpalno enoto, oljnim hladilnikom (3 kW), zaščito proti prahu za zgornji valj. Teža: pribl. 13000 kg, skupne mere D/Š/V: pribl. 1290 mm/860 mm/3250 mm. Ogled možen po dogovoru. Bjdey Uydxspfx Akrjdc

Stanje: rabljeno, Leto izdelave: 1985, Tlak 6,3 t Hod 250 mm Izvlek 150 mm Vgradna višina 440 mm Površina mize 330 x 270 mm Višina mize nad tlemi 970 mm Površina batiča 65 mm Količina olja 30 l Pogonska moč 1,5 kW Prostorske zahteve (ŠxGxV) 0,8 x 1,3 x 2,4 m z oljnohidravličnim pogonom, svetlobna pregrada (znamka Sick C 4000), upravljanje odvisno od tlaka/časa in hoda, zgornja in spodnja meja hoda, mehanski globinski omejevalnik, dvoročna upravljalna funkcija Bdedpjyfwvlsfx Akrec

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, številka stroja/vozila: 119, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, stiskalna sila: 30 t, hod: 700 mm, širina mize: 500 mm, dolžina mize: 700 mm, razmak između stupova: 680 mm, skupna dolžina: 2.100 mm, skupna širina: 1.800 mm, skupna višina: 3.500 mm, skupna masa: 3.000 kg, Oprema: varnostna svetlobna zapora, Pridrževana 4-stebrična hidravlična stiskalnica iz zaprtja obrata. Stroj je popolnoma funkcionalen in je bil do zadnjega v uporabi v proizvodnji. Stroj je bil posodobljen in ima prenovljeno digitalno Siemensovo krmiljenje. Prav tako je opremljen z varnostno ograjo in svetlobnimi zavesami podjetja SICK. Bdedpjy Sglwjfx Akrsc Stroj je trenutno v skladišču, možen pa je tudi ogled.

Stanje: rabljeno, Leto izdelave: 1980, Pritisk 6,3 t Hod 250 mm Izvlek 150 mm Vgradna višina 450 mm Površina mize 330 x 270 mm Višina mize nad tlemi 970 mm Površina bata 240 x 100 mm Oljna zaloga 30 l Pogonska moč 1,5 kW Prostorske zahteve (ŠxGxV) 0,9 x 1,3 x 2,4 m Dovoljeno za ročno vlaganje skladno z nemškimi predpisi o varnosti pri delu (UVV) Bdjdpfx Akjy Ig Nbjrec Z oljnohidravličnim pogonom, svetlobno zaveso (znamka Pilz), upravljanje glede na tlak/čas in gibanje, zgornja in spodnja omejitev hoda, mehanski globinski omejevalnik, dvoročno upravljanje.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, številka stroja/vozila: DF0195 - Rev.00, stiskalna sila: 40 t, C-Frame Press – Manufacturer Calende – 40 t C-Press – Table 750 × 720 mm For sale is a compact hydraulic single-column press (C-frame) from Calende, offering a pressing force of 40 t. This machine stands out for its high approach speeds, modern Siemens control system, and robust construction, making it ideally suited for assembly, straightening, and press-in operations. ===== Technical Data & Information: Single-Column Press Calende – 40 t C-Press ==== General Information - Manufacturer: Calende - Model: Single-Column Press - Design: C-frame press / Single-column press - Pressing force: 40 t - Machine weight: approx. 3.8 t - Dimensions (L × W × H): approx. 1,300 × 1,800 × 3,200 mm ==== Working Area - Passage width: 850 mm - Stroke: 500 mm - Max. working height: 700 mm - Table height: approx. 850 mm ==== Table & Ram - Table plate: 750 × 720 mm - Ram plate: 600 × 450 mm ==== Speeds - Approach speed: max. 140 mm/s - Pressing speed: 15 mm/s - Return speed: 140 mm/s ==== Hydraulics - Motor power: 12.7 kW - Return force: 4 t - Hydraulic tank volume: 160 l - Oil cooling: electric, 1.5 kW (max) ==== Control & Operation - Control system: Siemens S7-1200 - Monitor: WEG, 10" ===== Bdjdsfhcc Hopfx Akrsc Assembly operations, press-in operations, straightening operations, series production, workshop use, maintenance Single-column press, C-press, hydraulic press, workshop press, press-in press, industrial press, die-spotting press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quotation. Our hydraulic presses are manufactured in compliance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the Brazilian national safety directive NR 12, which builds upon these standards. Our core strengths are special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, številka stroja/vozila: DF0150, stiskalna sila: 63 t, Single-column press – Manufacturer Calende – 63 t C-frame press – Table 750 × 600 mm For sale is a robust hydraulic single-column press (C-frame press) from Calende with a pressing force of 63 t. This machine provides high operating speeds, a modern Siemens control system, as well as compact design, making it ideal for assembly, straightening, and pressing applications in industrial use. ==== Technical Data + Information: Single-column press Calende – 63 t C-frame ==== General Information - Manufacturer: Calende - Model: Single-column press - Design: C-frame press / single-column press - Press force: 63 t - Machine weight: approx. 5.1 t - Dimensions (L × W × H): approx. 1,500 × 1,600 × 2,995 mm ==== Working Area - Throat width: 700 mm - Stroke: 500 mm - Max. working height: 700 mm Bodofhcc Uopfx Akrodc - Table height: 850 mm ==== Table & Ram - Table plate: 750 × 600 mm - Ram plate: 600 × 540 mm ==== Speeds - Approach speed: max. 140 mm/s - Pressing speed: 15 mm/s ==== Hydraulics - Motor power: 11 kW - Return force: 6 t - Oil tank volume: 150 l ==== Electrical & Control - Control voltage: 24 V - Frequency: 50 Hz - Control system: Siemens S7-1200 - Monitor: Siemens, 12" ===== Assembly work, pressing operations, straightening tasks, series production, workshop applications, maintenance Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, tool adjustment press, tryout press, tool try out press Are you looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are manufactured in accordance with German machinery guidelines, as well as the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety guideline NR 12, which builds upon these standards. Our core competency is special-purpose machinery and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0303, stiskalna sila: 160 t, dolžina mize: 550 mm, širina mize: 500 mm, delovna višina: 700 mm, Vulcanizing Press – Manufacturer Hidrobrasil – 160 t Heated Press For sale is a hydraulic vulcanizing press manufactured by Hidrobrasil, offering a maximum pressing force of 160 t. This machine features heated platens measuring 550 × 500 mm, a daylight opening of 700 mm, and a stroke of 400 mm, making it especially suitable for vulcanization, lamination, and thermal pressing processes in rubber and plastics processing. ==== Technical Data & Information: Vulcanizing Press Hidrobrasil – Heated Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Type: Heated press / vulcanizing press - Pressing force: 160 t - Machine weight: approx. 4.2 t - Dimensions (L × W × H): 950 × 2,440 × 2,400 mm ==== Working Area - Daylight opening: 700 mm - Stroke / Travel: 400 mm - Table height above floor: 850 mm ==== Table and Ram - Table platen: 700 × 600 mm - Ram platen: 700 × 600 mm ==== Forces - Return force: 16 t ==== Speeds - Approach speed: 10 mm/s - Pressing speed: 10 mm/s - Rapid traverse speed: 10 mm/s - Return speed: 25 mm/s ==== Hydraulics - Motor power: 15 kW - Oil tank: 300 l - Electric oil cooling: 1.5 kW ==== Heating System - Heating platen size: 550 × 500 mm - Electrically heated up to 200°C - Heating power: approx. 12 kW - Temperature sensors: 2 per heating plate Bdsdpfx Aefxyh Rjkrsc - Temperature accuracy: ± 3°C in the 500 × 450 mm area - Heating platen manufacturer: ELKOM - Top and bottom platens separately controllable - Adjustable heating time - Automatic opening after heating time (optional) ==== Ejector System - Ejector size: 30 × 30 mm - Ejector stroke: 150 mm - Ejector force: 15 t - Ejector speed: 25 mm/s - Number of ejectors: 1 ==== Equipment - Swiveling two-hand operation - Interior lighting - Pressure adjustment via rotary knob (10 steps) - Heating plates with T-slots (DIN 650, customer-specific) - Thermal insulation between heating plates and machine body ==== Options - Light curtains at front and rear: €6,800 - Rear monitored double door: €2,400 - Right side monitored door: €1,200 - Left side monitored door: €1,200 ===== Vulcanization, rubber processing, plastics processing, lamination processes, compression molding, thermal pressing, hot pressing Vulcanizing press, heated press, hydraulic press, rubber press, lamination press, compression press, thermo press, tryout press, tool tryout press Looking for a hydraulic press customized to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directive as well as the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Moreover, our presses exceed Canadian and European safety requirements, as they comply fully with the national Brazilian safety guideline NR 12, which builds upon these standards. Our core strength lies in special machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. Only components from leading European manufacturers are used in the press hydraulics.

Stanje: novo, številka stroja/vozila: DF0189, stiskalna sila: 500 t, Single-Column Press – Manufacturer Calende – 500 t Straightening Press – Table 1,200 × 1,200 mm For sale is a powerful hydraulic single-column press from the manufacturer Calende with a pressing force of 500 t. This machine impresses with its compact design while delivering high pressing performance, ideal for demanding straightening, assembly, and forming operations. ==== Bdodpfefxykajx Akrec Technical Data & Information: Single-Column Press Calende – 500 t Straightening Press ==== General Information - Manufacturer: Calende - Model: Single-Column Press - Design: C-Frame Press / Single-Column Press - Pressing force: 500 t - Machine weight: approx. 40 t - Dimensions (L × W × H): 2,800 × 1,750 × 4,350 mm ==== Working Area - Pass-through width: 1,200 mm - Stroke: 400 mm - Max. working height: 800 mm - Table height: approx. 1,200 mm ==== Table & Ram - Table plate: 1,200 × 1,200 mm - Ram plate: 1,000 × 1,000 mm ==== Speeds - Approach speed: 0 – 10 mm/s - Pressing speed: 0 – 10 mm/s ==== Hydraulics - Motor power: 50 kW - Return force: 50 t - Oil tank capacity: 700 l ===== Straightening operations, assembly work, forming technology, press fitting, maintenance, toolmaking Single-column press, C-frame press, hydraulic press, straightening press, industrial press, die spotting press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery regulations (Directive 2006/42/EC), EC standards, and EU safety provisions. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which builds upon those norms. Our greatest strength is custom machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 100 t, Single-column press – Manufacturer Durendus – 100 t C-frame press – Table 800 × 600 mm Offered for sale is a hydraulic single-column press (C-frame design) by Durendus, with adjustable press force up to 100 t. This machine is suitable for a wide array of pressing, assembly, and forming operations, can be manufactured new at short notice, and tailored to your technical requirements. ==== Technical Data & Details: Hydraulic Single-Column Press – C-Frame – 100 t ==== General Specifications - Manufacturer: Durendus - Model: Single-column press - Design: C-frame press / single-column press - Press force: 15 – 100 t (adjustable) - Installation height: max. 700 mm - Table size: 800 × 600 mm - Ram surface: 800 × 600 mm - Table height: 900 mm - Dimensions (W × D × H): approx. 1,600 × 1,800 × 2,900 mm - Machine weight: approx. 4,800 kg - T-slots: according to customer specification ==== Hydraulic Cylinder - Stroke: 0 – 500 mm (adjustable) - Working pressure: max. 245 bar - Return speed: 110 mm/s - Pressing speed: 5 – 12 mm/s - Rapid traverse speed: 140 mm/s ==== Hydraulic Unit - Pump: Bosch Rexroth Bedpefu Nqxsfx Akrsdc - Delivery rate: 28 l/min - Motor power: 11 kW - Pressure accuracy: ± 5 bar - Valve: NG-50 - Installation: Hydraulic unit mounted on top - Filter: Filtrec - Oil level monitoring: electronic - Cooling: air-cooled ==== Control & Operation - PLC: Siemens S7-1200 - Touchscreen: Siemens SIMATIC Comfort 9" - Adjustable: pressure, stroke, speeds - Oil temperature display: available - Filter monitoring: available - Error diagnostics: available - Remote access: available - Recipe memory: up to 100 programs ==== Modes of Operation - Manual (setup) - Manual (single stroke) - Automatic operation - Operation: two-hand control and foot switch ==== Safety - Hydraulic ram locking - Upper and lower limit switches - Safety PLC - Light barriers (SICK / Keyence / Leuze), 700 mm - Monitored safety doors left and right ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor connection: 11 kW - Total connected load: approx. 13 kW ===== Assembly work, press-fitting, forming technology, series production, toolmaking, maintenance Single-column press, C-frame press, hydraulic press, industrial press, production press, tool adjustment press, tryout press, tool try out press Looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are designed in compliance with both German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety directive NR 12, which is based upon these standards. Our core competence is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, stiskalna sila: 110 t, Single-column press – Manufacturer Calende – 110 t Straightening Press – Table 800 × 700 mm For sale is a compact hydraulic single-column press (C-frame) from manufacturer Calende with a pressing force of 110 t. This machine impresses with its space-saving design, robust performance data, and versatile application possibilities, making it ideal for straightening, assembly, and pressing operations. ==== Technical Data + Information: Single-column Press Calende – 110 t Straightening Press ==== General Information - Manufacturer: Calende Bdjdpfx Akjfxygteroc - Model: Single-column press - Design: C-frame press / Single-column press - Pressing force: 110 t - Machine weight: approx. 4.5 t - Dimensions (L × W × H): approx. 1,650 × 1,150 × 2,800 mm ==== Working Area - Stroke: 400 mm - Max. working height: 500 mm - Table height: approx. 900 mm ==== Table & Ram - Table plate: 800 × 700 mm - Ram plate: 600 × 500 mm - Table cut-out: 150 × 150 mm ==== Speeds - Approach speed: 10 mm/s - Pressing speed: 10 mm/s - Rapid traverse: 10 mm/s ==== Hydraulics - Total power requirement: 11 kW - Retraction force: 11 t - Oil tank capacity: 250 l ==== Controls & Options - Monitor: Siemens, 7" - Option: Siemens S7-1200 control - Option: Side panels - Option: Light curtains front and rear ===== Straightening work, Assembly work, Press-fitting work, Workshop applications, Maintenance Single-column press, C-frame press, Hydraulic press, Straightening press, Workshop press, Press-fitting press, Industrial press, Tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all requirements of the national Brazilian safety directive NR 12, which builds upon them. Our major strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. The hydraulics of our presses are predominantly equipped with components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0287, stiskalna sila: 25 t, Assembly Press – Manufacturer: Hidrobrasil – 25 t Laboratory Press with Sliding Table – Table 1000 × 800 mm For sale is a hydraulic assembly and disassembly press manufactured by Hidrobrasil, offering a pressing capacity of 25 t. The machine is equipped with a sliding table and an additional mounting table, making it ideally suited for precise assembly, disassembly, and inspection processes in workshops, laboratories, and production environments. ===== Technical Data & Information: Hydraulic Assembly Press – 25 t – Sliding Table ==== General Specifications - Manufacturer: Hidrobrasil - Model: Assembly Press / Laboratory Press - Design: Single-column press with sliding table - Pressing Force: 25 t - Machine Weight: approx. 4 t - Dimensions (L × W × H): approx. 2,054 × 2,200 × 3,126 mm ==== Working Area - Pass-through Width: 1,000 mm - Stroke: 800 mm - Max. Working Height: 800 mm - Table Height: approx. 850 mm ==== Table & Ram - Table Plate: 1,000 × 800 mm - Ram Plate: 400 × 400 mm - Ram Thickness: 122 mm - Table Opening: 650 × 150 mm - Auxiliary Mounting Table: 1,000 × 800 mm (fitted to the left) - Steel Plate on Rollers: 600 × 400 × 15 mm ==== Guide & Construction - Ram Guidance: 4 chromed linear guides Ø 50 mm - Guide Type: Bronze guides ==== Speeds - Approach Speed: up to 80 mm/s - Pressing Speed: 10 mm/s - Rapid Traverse: 80 mm/s ==== Hydraulics - Motor Power: 5 kW - Retraction Force: 2 t - Oil Tank Volume: 200 l ==== Control & Operation - Control System: Siemens S7-1200 Bjdpjfxyikjfx Akrodc - Monitor: Siemens, 10" - Operation: Precise control for assembly and disassembly processes ==== Safety - Light Barriers: Schmersal, 1,800 mm above floor ===== Assembly work, disassembly work, inspection operations, laboratory applications, pressing-in operations, maintenance, and servicing Assembly Press, Laboratory Press, Hydraulic Press, Single-column Press, Sliding Table Press, Industrial Press, Tooling Press, Tryout Press, Tool Try Out Press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery guidelines, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these regulations. Our core competence lies in special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0369, stiskalna sila: 220 t, Straightening Press – Manufacturer Calende – 220 t Double-Column Press – Table 2,000 × 600 mm For sale is a high-performance straightening press by Calende in double-column design with a pressing force of 220 t. The machine features a large working width of 1,500 mm, a robust construction, and state-of-the-art control technology, making it ideal for straightening, bending, and forming operations in industrial production environments. ==== Technical Data & Information: Straightening Press Calende – 220 t Double-Column Press ==== General Information - Manufacturer: Calende - Model: Straightening Press - Design: Double-column press - Pressing force: 220 t - Machine weight: approx. 5.2 t - Dimensions (L × W × H): approx. 4,000 × 1,950 × 2,900 mm ==== Working Area - Pass-through width: 1,500 mm - Stroke: 400 mm - Max. working height: 500 mm - Table height: approx. 900 mm ==== Table and Ram - Table size: 2,000 × 600 mm - Ram plate: 2,000 × 400 mm ==== Forces - Return force: 20 t ==== Speeds - Approach speed: up to 10 mm/s - Working speed: 10 mm/s - Return speed: 25 mm/s - Rapid traverse: 10 mm/s ==== Hydraulics - Total power requirement: 30 kW - Oil tank volume: 500 l - Electric oil cooling: max. 1.5 kW ==== Control and Measurement Technology Bdjdpfx Asfxyivokrsc - Travel measurement system: Turck or Balluff - Control system: Siemens S7-1500 or Pilz PSS 4000 - Monitor: Siemens or Omron ===== Straightening, bending, forming technology, metalworking, maintenance, series production, component correction Straightening press, double-column press, hydraulic press, press brake, forming press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the Brazilian national safety standard NR 12, which builds upon these standards. Our great strength lies in custom machine engineering and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics systems, we mainly use components from leading European manufacturers.

Leto izdelave: 2020, stanje: delavnici obnovljeno (rabljeno), stiskalna sila: 400 t, številka stroja/vozila: DF0317, Hidralmac Mineral Block Press – 400 t – Salt Press – 600 mm Clearance – with Conveyor Belt For sale is a hydraulic mineral block press manufactured by Hidralmac, offering 400 tons of pressing force. This machine is specially designed for the production of salt and mineral block products and features an integrated conveyor belt for efficient material flow. Due to its robust construction and stainless steel components in product-contact areas, the press is ideally suited for continuous industrial operation. ==== Technical Data & Information: Hydraulic Mineral Block Press – 400 t ==== General Information - Manufacturer: Hidralmac - Model: Mineral Block Press - Machine Name: Salt Press - Design: Four-column press - Pressing Force: 400 t - Machine Weight: approx. 14 t - Dimensions (L × W × H): 2,380 × 1,680 × 3,580 mm - Motor Power: 36 kW ==== Working Area - Clearance Width: 600 mm - Max. Working Height: 750 mm - Stroke: 400 mm - Travel Path: 500 mm ==== Table & Construction - Column Diameter: 230 mm - Return Force: 40 t - Steel Grade: Machine construction steel LCG ASTM A36 (DIN 8651) - Product Contact Parts: Stainless steel ==== Speeds Bdjdod E Irhjpfx Akroc - Approach Speed: max. 10 mm/sec - Pressing Speed: 10 mm/sec - Rapid Traverse: 25 mm/sec ==== Hydraulics & Peripheral Equipment - Oil Tank: 600 l - Oil Cooling: 1.5 kW - Conveyor Belt: 6 m length ==== Control - Monitor: WEG, 12 inch ===== Salt block pressing, mineral block production, pressing processes, industrial manufacturing Hydraulic press, mineral block press, salt press, production press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised offer. Our hydraulic presses are manufactured according to German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which builds upon these. Our core competency lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. For the hydraulic systems of our presses, we predominantly use components from leading European manufacturers.

Leto izdelave: 2020, stanje: skoraj kot novo (rabljeno), stiskalna sila: 150 t, Hidralmac salt press – 150 t – mineral lick block press – stainless steel contact surfaces For sale is a hydraulic mineral block or salt press from Hidralmac with a pressing force of 150 t. This machine is specifically designed for the production of salt and mineral blocks, featuring stainless steel contact surfaces for hygienic and corrosion-resistant processing. Thanks to its robust construction and optional extensions, it is suitable for continuous industrial operation. ==== Technical specifications & information: Hydraulic salt press – 150 t ==== General information - Manufacturer: Hidralmac - Model: Mineral Block Press - Machine designation: Salt Press - Type: Hydraulic production press - Pressing force: 150 t - Machine weight: approx. 8.5 t - Dimensions (L × W × H): 1,200 × 1,800 × 3,100 mm - Motor power: 10 kW - Steel quality: Structural steel LCG ASTM A36 ==== Working area - Max. working height: 1,000 mm - Stroke: 500 mm - Table height above floor: 1,000 mm ==== Speeds Bdodpfx Aodxvfiokrjc - Approach speed: max. 9.9 mm/sec - Pressing speed – up to 100 t: 9.9–0 mm/sec - Return speed: 25 mm/sec ==== Hydraulics & Technology - Hydraulic tank: 500 l - Oil capacity: approx. 400 l - Column diameter: 230 mm, chrome-plated - Lubrication: manual, via grease nipples ==== Construction & features - All product-contacting parts made of stainless steel - Robust design for salt and mineral processing - High corrosion resistance - Maintenance-friendly construction ==== Options (on request) - Perimeter maintenance platform - Closed side panels (left/right/rear) - Light curtains at the front (increased speed) - Speed increase option - Siemens S7-1200 control with 12" display - Pilz safety technology ===== Salt production, mineral block manufacturing, chemical industry, compacts, series production Hydraulic press, salt press, mineral block press, production press, industrial press, press system Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply fully with the Brazilian national safety standard NR 12, which builds upon these standards. Our core strength is special-purpose machine construction and press automation. We offer custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, številka stroja/vozila: DF0151 - Rev.00, stiskalna sila: 110 t, Single-column Press – Manufacturer Calende – 110 t C-Frame Press – Table 800 × 700 mm A high-performance hydraulic single-column press (C-frame) from Calende with a pressing force of 110 t is offered for sale. The machine features high dynamics via proportional valve control, modern Siemens automation, as well as extensive adjustment options, making it ideal for demanding assembly, straightening, and press-fit applications. ==== Technical Data & Information: Single-column Press Calende – 110 t C-Frame Press ==== General Specifications - Manufacturer: Calende - Model: Single-column Press - Design: C-frame press / Single-column press - Pressing force: 110 t - Machine weight: approx. 5 t - Dimensions (L × W × H): approx. 1,950 × 1,510 × 3,145 mm ==== Working Area - Pass-through width: 800 mm - Stroke: 500 mm - Max. working height: 700 mm - Table height: approx. 900 mm ==== Table & Ram - Table plate: 800 × 700 mm - Ram plate: 800 × 600 mm - Ram plate thickness: 6 inches ==== Speeds - Approach speed: 5 – 195 mm/s - Pressing speed: 1 – 15 mm/s - Return speed: 5 – 140 mm/s ==== Hydraulics - Motor power: 20 kW - Retraction force: 11 t - Cylinder diameter: Ø 200 mm - Oil tank capacity: 400 l - Proportional valve for speed control ==== Control & Operation - Control system: Siemens S7-1200 - Monitor: Siemens, 10" - Program memory: up to 200 programs Bodpfx Aedxrqwskrjdc - HMI pressure regulation: 20 – 110 t - Siemens remote access for maintenance ==== Safety & Equipment - Light curtain: Schmersal, 700 mm - Motor: IE3 energy efficiency (CE compliant) ===== Assembly, press-fit, and straightening operations, series production, tool manufacturing, industrial production, maintenance Single-column press, C-frame press, hydraulic press, workshop press, press-fit press, industrial press, die setting press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses surpass Canadian and European safety requirements, as they fully comply with all points of the national Brazilian safety standard NR 12, which is based on these regulations. Our core strength is special-purpose machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses primarily utilize components from leading European manufacturers.

Stanje: dober (rabljeno), Leto izdelave: 2012, Baujahr ist 1979, die Maschine wurde aber 2012 komplett generalüberholt auf neuste UVV Einbauhöhe: 800 mm Stößelhub: 500 mm Ausladung: 360 mm Bodpjy H Iddsfx Akrodc Nennkraft: 400 kN Hydraulikdruck: 160 bar Betriebsstunden: 1356 Sonstiges: neue Steuerung von Pilz, Elektroschaltpläne vorhanden Video über Funktionalität vorhanden Auf Wunsch kann Transport und Verladen gegen Aufpreis Europaweit organisiert werden. Preise zzgl Mehrwertsteuer Besichtigung nach Terminvereinbarung möglich. Kontaktieren Sie uns, unser Team freut sich Ihnen weiterhelfen zu dürfen. Maschinen An- / Verkauf KAUF / VERKAUF VON PRODUKTIONS- & METALLBEARBEITUNGSMASCHINEN WERKZEUGMASCHINEN UVM. Sie benötigen eine hochwertige, aber preiswerte Maschine für Ihre Fertigung? Oder wollen Sie Ihre verkaufen? Für weitere Infos- oder Kontaktmöglichkeiten erreichen Sie uns über das Kontaktformular.

Stanje: dober (rabljeno), Leto izdelave: 1982, Pritisna sila: maks. 200 kN Varnostna razdalja: 100 mm Dodatni pomik: maks. 10 mm Moč motorja: 3 kW vključno z dodatno opremo Na zahtevo lahko organiziramo transport in nakladanje po vsej Evropi za doplačilo. Cene so brez DDV Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam z veseljem pomaga. Bodpsy H Ibvjfx Akrodc Odkup in prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV, ORODJARSKIH STROJEV IN OSTALO. Potrebujete kakovosten, a ugoden stroj za svojo proizvodnjo? Ali pa ga želite prodati? Za dodatne informacije ali kontaktne možnosti nas kontaktirajte preko kontaktnega obrazca.

Leto izdelave: 1977, stanje: pripravljen za uporabo (rabljen), Na voljo je hidravlična univerzalna stiskalnica. Tlačna sila: 75t, hod: 250mm, površina mize X/Y: pribl. 600mm/500mm, varnostna razdalja: 107mm, zavorna pot: 18mm. Oprema: ročno nastavljiva omejitev hoda (zgoraj/spodaj), integriran izmetalec z upravljanjem vlečne blazine, analogni prikaz tlaka do 400 barov. Varnostna oprema: SICK varnostna svetlobna zavesa za delovno območje. Skupna teža: pribl. 3500kg, skupne mere X/Y/Z: pribl. 1300mm/1800mm/2900mm. Ogled možen po dogovoru. Bdjdjy S A Nfspfx Akrsc

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0303, stiskalna sila: 160 t, dolžina mize: 550 mm, širina mize: 500 mm, delovna višina: 550 mm, Vulcanizing Press – Manufacturer Hidrobrasil – 160 t Heated Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 160 t. The machine features electrically heated platens measuring 550 × 500 mm, a maximum working height of 550 mm, as well as a modern control system with recipe management. It is particularly suited for vulcanization, lamination, and thermal pressing processes in rubber and plastics processing. ==== Technical Data & Information: Vulcanizing Press Hidrobrasil – Heated Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heated Press / Vulcanizing Press - Pressing force: 160 t - Machine weight: approx. 4.3 t - Dimensions (L × W × H): 1,150 × 2,600 × 2,400 mm ==== Working Area - Column gap: 700 mm - Max. working height: 550 mm - Stroke / travel: 400 mm - Table height above floor: 900 mm ==== Table and Ram - Table plate: 700 × 600 mm - Ram plate: 700 × 600 mm Bedpfofxygpjx Akredc - Heating plates: 550 × 500 mm (with 2 temperature sensors) ==== Forces - Return force: 16 t ==== Speeds - Approach speed: 50 mm/s - Pressing phase speed: 10 mm/s - Rapid traverse speed: 50 mm/s - Return speed: 50 mm/s ==== Hydraulics - Motor power: 15 kW - Oil tank: 300 l - Electric oil cooling: 1.5 kW ==== Heating System - Electrically heated plates up to 200 °C - Heating power: approx. 12 kW - Temperature range: 100 – 200 °C (in 5 °C increments) - Temperature accuracy: ± 3 °C - 2 temperature sensors per heating plate - Upper and lower plates individually controllable - Adjustable heating time - Automatic opening after heating cycle ==== Ejector System - Ejector size: 30 × 30 mm - Ejector stroke: 150 mm - Ejector force: 15 t - Ejector speed: 25 mm/s - Number of ejectors: 1 ==== Control System - Siemens S7-1200 - Monitor: 12-inch - Freely programmable positions: - Upper stop / speed change - Pressure build-up A / pressure release - Pressure build-up B / pressure release - Lower stop - Pressure and venting time freely adjustable - Pressure hold time up to 20 minutes - Recipe management: 25 programs storable - Expandable via USB ==== Equipment - Swiveling two-hand operation - Interior lighting - Pressure adjustment via rotary switch (10 levels) - Platens with T-slots as per DIN 650 (customizable) - Thermal insulation between platens and machine frame ==== Options - Rear double door with monitoring: €2,400 - Right-side monitored door: €1,200 - Left-side monitored door: €1,200 ===== Vulcanization, rubber processing, plastics processing, lamination, compression molding, thermal pressing, hot pressing Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, compression press, thermo press, tryout press, tool tryout press Looking for a hydraulic press tailored to your specific application? Contact us for an individual quote. Our key strengths are in special-purpose machine construction and press automation.