Enostebrična hidravlična stiskalnica z vlečnim blazinastim prijemalom, hidravlična vlečna stiskalnic

RÖCHER REP 100.01 SZ

Single-Column Hydraulic Press with Drawing Cushion RÖCHER Type REP 100.01 SZ
Hydraulic Drawing Press
Machine No. 15,499 Year of manufacture: 2003
Pressing force: 100 tons
Ram stroke: 500 mm
Throat depth: 370 mm
Installation height: 600 mm
Table surface: 850 x 700 mm with through-hole Ø 150 mm
Ram surface: 700 x 600 mm
Gtjdeyupulspfx Ab Ejw
Ram ejector force: 16 tons (160 kN)
Ram ejector stroke: 100 mm
Ram ejector with internal thread M24 x 1.5 mm
Drawing cushion force: 40 tons (400 kN)
Drawing cushion stroke: 200 mm
Drawing cushion surface: 530 x 530 mm
Pressure holding time: 0 to 90 sec.
Table height above floor: 910 mm
Max. hydraulic operating pressure: 300 bar
Hydraulic tank capacity: 700 liters
Rapid approach speed: approx. 400 mm/sec.
Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec.
Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec.
Return speed: 50 to 400 mm/sec.
Main pump drive power: 18.5 kW
Auxiliary pump drive power: 4 kW
Electrical connection: 400 Volt, 50 Hz (63 Amps)
- Operation and programming via control panel PC 670 touch panel, keyboard and mouse
- Machine control via Siemens S7-300 PLC
- Ram stroke and pressing force programmable via the control system
- Drawing cushion with drawing and ejector function
- Drawing cushion force infinitely adjustable
- Ram and drawing cushion fitted with direct travel measurement systems
- Drawing cushion can be moved in and out under the press area, for punching operations using the through-hole
- Floor-level installation, drawing cushion does not extend into the floor
- Pressure and travel shut-off
- Fixed stop with indirect measuring system
- Pressure holding time infinitely programmable
- Table surface with holes for drawing cushion ram rods
- Ram with ejector
- Cutting stroke damping
- Stroke release via two-hand operation, foot switch, hand lever, and push button on the control panel
- LEUZE light barrier as reach-in protection in safety mode
- Front mirror columns on the press table laterally adjustable
- Electrical control cabinet mounted on the machine frame
- Hydraulic oil cooler with fan motor (oil-air cooling)
- Manual central lubrication pump
- 2x hose lines for tool temperature control or cooling at the ram
- Piece counter in the control system
- 306 read operating hours
- Operating manual, hydraulic diagram, and electrical diagram available
Space requirement for the press (L x W x H): 3100 x 1800 x 4160 mm
Weight: approx. 13 tons
Very good condition, as new

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.