C-stiskalnica
Durendus Einständerpresse

Name: Durendus Einständerpresse
Brand: Durendus
Availability: InStock

Leto izdelave

2026

Stanje

Novo

Lokacija

Ennepetal

Osnovni podatki

Oznaka stroja:: C-stiskalnica

Proizvajalec:: Durendus

Model:: Einständerpresse

Leto izdelave:: 2026

Stanje:: novo

Cena in lokacija

Lokacija:: Ennepetal, Nemčija

Tehnične podrobnosti

Stiskalna sila:

100 t

Podrobnosti ponudbe

ID oglasa:: A4746675

Referenčna številka:: 100T 800 × 600 C

Posodobitev:: nazadnje dne 19.06.2026

Opis

Single-column press – Manufacturer Durendus – 100 t C-frame press – Table 800 × 600 mm

Offered for sale is a hydraulic single-column press (C-frame design) by Durendus, with adjustable press force up to 100 t. This machine is suitable for a wide array of pressing, assembly, and forming operations, can be manufactured new at short notice, and tailored to your technical requirements.

====

Technical Data & Details:
Hydraulic Single-Column Press – C-Frame – 100 t

==== General Specifications
- Manufacturer: Durendus
- Model: Single-column press
- Design: C-frame press / single-column press
- Press force: 15 – 100 t (adjustable)
- Installation height: max. 700 mm
- Table size: 800 × 600 mm
- Ram surface: 800 × 600 mm
- Table height: 900 mm
- Dimensions (W × D × H): approx. 1,600 × 1,800 × 2,900 mm
- Machine weight: approx. 4,800 kg
- T-slots: according to customer specification

==== Hydraulic Cylinder
- Stroke: 0 – 500 mm (adjustable)
- Working pressure: max. 245 bar
- Return speed: 110 mm/s
- Pressing speed: 5 – 12 mm/s
- Rapid traverse speed: 140 mm/s

==== Hydraulic Unit
- Pump: Bosch Rexroth
- Delivery rate: 28 l/min
- Motor power: 11 kW
- Pressure accuracy: ± 5 bar
- Valve: NG-50
- Installation: Hydraulic unit mounted on top
- Filter: Filtrec
- Oil level monitoring: electronic
- Cooling: air-cooled

==== Control & Operation
- PLC: Siemens S7-1200
- Touchscreen: Siemens SIMATIC Comfort 9"
- Adjustable: pressure, stroke, speeds
- Oil temperature display: available
- Filter monitoring: available
- Error diagnostics: available
- Remote access: available
- Recipe memory: up to 100 programs

==== Modes of Operation
- Manual (setup)
- Manual (single stroke)
- Automatic operation
- Operation: two-hand control and foot switch
Bodpfx Aisfu Nqxoqswu

==== Safety
- Hydraulic ram locking
- Upper and lower limit switches
- Safety PLC
- Light barriers (SICK / Keyence / Leuze), 700 mm
- Monitored safety doors left and right

==== Electrical
- Main supply: 400 V AC
- Control voltage: 24 V DC
- Frequency: 50 Hz
- Motor connection: 11 kW
- Total connected load: approx. 13 kW

=====

Assembly work, press-fitting, forming technology, series production, toolmaking, maintenance

Single-column press, C-frame press, hydraulic press, industrial press, production press, tool adjustment press, tryout press, tool try out press

Looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are designed in compliance with both German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety directive NR 12, which is based upon these standards. Our core competence is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Pošlji povpraševanje

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Servotiskalnica Durendus Einständerpresse

Gelsenkirchen

835 km

Servotiskalnica
DurendusEinständerpresse

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 125 t, Single-column press – Manufacturer Durendus – 125 t servo press – Table 2200 × 750 mm For sale is a hydraulic C-frame servo press from Durendus, offering an adjustable pressing force up to 125 t and an integrated 50 t ejector. Thanks to state-of-the-art servo-hydraulics, this machine provides up to 40% lower energy consumption compared to conventional systems, making it ideal for demanding assembly, forming, and production processes. ==== Technical specifications and information: Hydraulic servo press – C-frame – 125 t ==== General information - Manufacturer: Durendus Bwsdsx Aqtqepfx Aiqou - Model: Single-column press / Servo press - Design: C-frame press - Pressing force: 20 – 125 t (adjustable) - Machine weight: approx. 8,700 kg - Dimensions (W × D × H): approx. 2,400 × 2,000 × 3,300 mm - Table height: 870 mm - Installation height: max. 1,000 mm ==== Table & Ram - Table size: 2,200 × 750 mm - Ram size: 980 × 750 mm - Guidance: 4 guide columns Ø 100 mm - Tool centering: 50 mm receptacle - Provision: Anti-vibration plates (30 mm) - Provision: Robot interface ==== Ejector - Ejector force: 50 t - Ejector stroke: 200 mm ==== Hydraulic cylinder - Stroke: 0 – 700 mm (adjustable) - Working pressure: max. 245 bar - Return speed: 300 mm/s - Idle speed: 300 mm/s - Pressing speed: - up to 25% load: 25 mm/s - up to 50% load: 14 mm/s - up to 80% load: 7 mm/s - up to 100% load: 6 mm/s ==== Hydraulic unit - Servo-hydraulic pump: Duplomatic, 143 l/min - Servo motor power: 15 kW - Pressure accuracy: ± 5 bar - Feed valve: NG-160 ===== Assembly operations, forming technology, series production, automated manufacturing, toolmaking, press applications with energy optimization Servo press, single-column press, C-frame press, hydraulic press, industrial press, production press, energy-efficient press, die spotting press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses surpass both Canadian and European safety requirements by fully complying with the Brazilian safety standard NR 12, which builds upon these norms. Our core strength lies in the design of special-purpose machinery and automation for presses. We offer bespoke hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.

Poglej podrobnosti

Mali oglas

Pnevmatske stiskalnice BERG & SCHMID PND 85/S

Velen

867 km

Pnevmatske stiskalnice
BERG & SCHMIDPND 85/S

Pokliči

Stanje: novo, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height from/to: 95 - 240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Bjdpjfv Awaefx Aiqjwu Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force throughout the entire stroke length. They are used primarily when long-stroke parts need to be processed with consistent force. Outstanding Engineering: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with end position cushioning on both sides • Double guide rings on the piston for constant, smooth operation • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against rotation • Spindle return on PND 85/S via only one cylinder chamber – saves additional air • Working height fine adjustment is easy, fast and precise in 2 steps: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limitation ring on the piston rod Additional advantage: Faster cycle times and air savings

Poglej podrobnosti

Mali oglas

Poljska

653 km

ALPHA LASER ALM 300
ALPHA LASERALM 300

Pokliči

Leto izdelave: 2019, obratovalne ure: 380 h, stanje: pripravljen za uporabo (rabljen), skupna masa: 300 kg, skupna širina: 730 mm, skupna višina: 1.585 mm, laserska moč: 300 W, Ta 3-osni laser ALPHA LASER ALM 300 je bil proizveden leta 2019. Opremljen je z zmogljivim Nd:YAG laserjem s povprečno močjo 300 W in vršno impulzno močjo 9 kW. Delovno območje znaša 120 × 110 × 800 mm, kar omogoča široko paleto uporabnosti. Če iščete visokokakovostne laserske možnosti varjenja, priporočamo naš naprodajni stroj ALPHA LASER ALM 300. Za več podrobnosti nas kontaktirajte. • Tip laserja / valovna dolžina: Nd:YAG, 1.064 nm • Način delovanja: pulzni • Povprečna moč: 300 W • Vršna impulzna moč: 9 kW • Impulsna energija: 90 J • Trajanje impulza: 0,5–20 ms • Frekvenca pulza: posamezen pulz do 100 Hz • Premer varilne točke: 0,2–2,0 mm • Fokusna leča: 150 mm (druge leče na voljo po podatkovnem listu leč) • Delovno območje / osi: Bwjdpfezf A Ifjx Aiqou • Hitrost pomika (X/Y/Z): 0–25 mm/s • Premik (X/Y/Z): 120 × 110 × 800 mm • Najnižja delovna točka: 530 mm • Najvišja delovna točka: 1590 mm • Dolžina roke: 1300 mm • Pogledna lupa / ergonomija: mikroskopski nastavek z okularji za uporabnike z očali 10× • Električni priključek: 3 × 400 V / 50–60 Hz / 3 × 16 A • Stanje: Uporabljeno izključno za demonstracije in razstave; tehnično in vizualno v odličnem stanju

Poglej podrobnosti

Mali oglas

Nemčija

650 km

Industrijski roboti
Kuka KUKAKR30-3

Pokliči

Mali oglas

Vertikalni stroj za brizganje ENGEL e-insert 740H/60 single-C

Berlin

713 km

Vertikalni stroj za brizganje
ENGELe-insert 740H/60 single-C

Pokliči

Mali oglas

Stroj za notranje in čelno brušenje Studer S145

Stuttgart

529 km

Stroj za notranje in čelno brušenje
StuderS145

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 018.0179.90.035, (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. Bodpfx Aieyh R Uweqewu No sales to private individuals.

Poglej podrobnosti

Mali oglas

Wuppertal

809 km

Spotting press
HESSMERT160 EST

Pokliči

Mali oglas

Stroji za brizganje ARBURG 470 C 1500-400 Golden Editions

Hattingen

815 km

Stroji za brizganje
ARBURG470 C 1500-400 Golden Editions

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18643 Manufacturer: ARBURG Model: 470 C 1500-400 Golden Edition Year of manufacture: 2008 Clamping Unit Clamping force: 150 t Opening stroke: 500 mm Tie bar spacing (h x v): 470 x 470 mm Min. mold height: 250 mm Daylight opening: 750 mm Injection Unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight (PS): 141 g Injection pressure: 2,500 bar Dimensions & Weight Dimensions (LxWxH): 4.6 x 1.6 x 2.1 m Machine weight: 4,850 kg Additional Information & Extras Core pull: 1 unit Additional Information: Communication card for ProSeS interface available (OPC-UA) Robot interface available (EUROMAP 67) The Golden Edition is a special version of the proven ALLROUNDER C-series, distinguished by optimized hydraulic performance, stable process control, and high reliability. Bsdpfx Aijxvy Rloqjwu The machine features a clamping force of 150 tons and is ideally suited for the production of technical plastic components as well as for applications with high quality requirements. Typical advantages of this series include: * Robust and durable design * High process stability and repeat accuracy * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition additionally stands out due to its optimized performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is often used in sectors such as automotive supply, technical plastic parts, and series production.

Poglej podrobnosti

Mali oglas

Enoslojna stiskalnica - hidravlična WMW Zeulenroda PYE 160 S1M

Nemčija

650 km

Enoslojna stiskalnica - hidravlična
WMW ZeulenrodaPYE 160 S1M

Pokliči

Stanje: rabljeno, Leto izdelave: 1986, Tlak 160 t Izvesek 360 mm Hod 500 mm Hitrost dol 200 mm/s Hitrost gor 125 mm/s Najv. razdalja miza - bat 1000 mm Površina mize 900 x 630 mm Površina bata 850 x 450 mm Vpenjalni zatič premer x globina 50 H7 / 85 mm Skupna moč 17 kW Bsdpfjv Rgwxex Aiqswu Teža stroja pribl. 7 t Potrebni prostor pribl. D x Š x V 1,25 x 2,2 x 3,45 m

Poglej podrobnosti

Mali oglas

Krožna žaga za lahke kovine / aluminij BERG+SCHMID VELOX 350 Manuell

Waiblingen

519 km

Krožna žaga za lahke kovine / aluminij
BERG+SCHMIDVELOX 350 Manuell

Pokliči

Stanje: novo, Leto izdelave: 2023, BERG+SCHMID krožna žaga iz aluminija, model VELOX 350, ročna, regulirana hitrost: 1800+3.600 vrt/min • Naklon desno in levo 45° • Naklon glave do 45° (nastavljiv) • Vrteča miza s krogličnimi ležaji • Osnova stroja • Najvišja kakovost reza zaradi dušenja vibracij Bsdpfxor Ilkts Aiqswu • Zelo miren potek reza • Enostaven zagon in visoka zmogljivost • Podstavek stroja s predalom za žagovino Dimenzije žaginega lista: 350x32 mm Dodatna oprema, kot so žagini listi, valjčni transporterji, merilni vodila, minimalno mazanje itd., je na voljo na zahtevo! Dobavni rok: iz skladišča Waiblingen Beinstein.

Poglej podrobnosti

Oglašujte tukaj