Servotiskalnica

Durendus Einständerpresse

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 100 t, Single-column press – Manufacturer Durendus – 100 t C-frame press – Table 800 × 600 mm Offered for sale is a hydraulic single-column press (C-frame design) by Durendus, with adjustable press force up to 100 t. This machine is suitable for a wide array of pressing, assembly, and forming operations, can be manufactured new at short notice, and tailored to your technical requirements. ==== Technical Data & Details: Hydraulic Single-Column Press – C-Frame – 100 t ==== General Specifications - Manufacturer: Durendus - Model: Single-column press - Design: C-frame press / single-column press - Press force: 15 – 100 t (adjustable) - Installation height: max. 700 mm - Table size: 800 × 600 mm - Ram surface: 800 × 600 mm - Table height: 900 mm - Dimensions (W × D × H): approx. 1,600 × 1,800 × 2,900 mm - Machine weight: approx. 4,800 kg - T-slots: according to customer specification ==== Hydraulic Cylinder - Stroke: 0 – 500 mm (adjustable) - Working pressure: max. 245 bar - Return speed: 110 mm/s - Pressing speed: 5 – 12 mm/s - Rapid traverse speed: 140 mm/s ==== Hydraulic Unit - Pump: Bosch Rexroth - Delivery rate: 28 l/min - Motor power: 11 kW - Pressure accuracy: ± 5 bar - Valve: NG-50 - Installation: Hydraulic unit mounted on top - Filter: Filtrec - Oil level monitoring: electronic - Cooling: air-cooled Hjdpfx Ajfu Nqxefajp ==== Control & Operation - PLC: Siemens S7-1200 - Touchscreen: Siemens SIMATIC Comfort 9" - Adjustable: pressure, stroke, speeds - Oil temperature display: available - Filter monitoring: available - Error diagnostics: available - Remote access: available - Recipe memory: up to 100 programs ==== Modes of Operation - Manual (setup) - Manual (single stroke) - Automatic operation - Operation: two-hand control and foot switch ==== Safety - Hydraulic ram locking - Upper and lower limit switches - Safety PLC - Light barriers (SICK / Keyence / Leuze), 700 mm - Monitored safety doors left and right ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor connection: 11 kW - Total connected load: approx. 13 kW ===== Assembly work, press-fitting, forming technology, series production, toolmaking, maintenance Single-column press, C-frame press, hydraulic press, industrial press, production press, tool adjustment press, tryout press, tool try out press Looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are designed in compliance with both German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety directive NR 12, which is based upon these standards. Our core competence is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Stanje: rabljeno, Leto izdelave: 2017, Premer cevi (maks.): 80 mm, dolžina vpenjala: 4.500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5XD → Maximum bending capacity, tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity, tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity, tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW → Tube loading length: 4.5 m Robust and durable steel construction in a rigid, force-locking design – no twist-prone construction resulting from, for example, split design of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control’s touch display enables easy and intuitive programming and operation. After inserting the tube, it is fixed by the chuck in the carriage, ensuring precise tube positioning and thus the production of dimensionally accurate geometries. The standard equipment also includes geometry checking prior to the bending process: If bending begins in the wrong position, the machine does not grant release, thus ruling out operating errors. Optional additional features provide more convenience and increase throughput as well as the system’s efficiency. Data exchange from the optional TBS-3D tube calculation software (PC version) is possible via USB stick or FTP access from the computer to the machine controller. USB and LAN (RJ45) connections are included as standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis, 4 kW → Rotational speed 2.9 rpm (=17°/sec.) → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation angle measurement ±0.1° → Manual stop system (longitudinal stops) → Manual indexing system (15° in rotation) → Three-jaw chuck for securing tube in the carriage → External control panel PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via network (W)LAN or USB → Material database Hjdettah Rjpfx Afaep Unique graphic programming: simple geometries can be calculated directly on the machine. After entering length and angles, the control computes the feed and bending angles directly. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-emptive mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on rollers) → Radius extension Images show new machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Tehnični podatki: Delovna širina: 2600 mm Zmogljivost upogibanja: 20,0 mm Pred-upogib: 16,0 mm Premer zgornjega valja: 330 mm Premer srednjega valja: 300 mm Premer stranskih valjev: 240 mm Stožčasta naprava za upogibanje z nagibom obeh stranskih valjev Premična upravljalna konzola z digitalnim prikazom Moč motorja: 11 kW Oznaka CE Hodpfsx Ii Hvex Afajp Dimenzije (dolžina x širina x višina): pribl. 5800 x 2300 x 1900 mm Teža: pribl. 11 t Dodatna oprema: Zgornja pomoč pri upogibanju Prodajalec ne odgovarja za morebitne napake pri pisanju ali prenosu podatkov. Stroj je po videzu, tehniki in obrabi primeren svoji starosti; rabljeni stroji se prodajajo brez kakršnegakoli jamstva.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, napetost odprtega kroga: 87 V, varilni tok pri 60% delovnega cikla: 270 A, varilni tok pri 100% delovnem ciklu: 220 A, vhodni tok: 25 A, vrsta zaščite (IP koda): IP23, varilni tok (min.): 3 A, varilni tok (maks.): 300 A, vhodna frekvenca: 60 Hz, We are offering this as-new EWM Tetrix XQ 300 puls AC/DC Expert 3.0 5POL welding machine, year of manufacture 2023. Includes Cool XQ 41-1 cooling module Supply voltage: 380–400 V Mains frequency: 50/60 Hz Rated current I1,max: 24.9 A Rated current I1,eff: 15.5 A Open circuit voltage (U0): 87 V MIG/MAG welding current range: 3–300 A MIG/MAG welding voltage: 10.1–22.0 V MIG/MAG duty cycle 40%: 300 A MIG/MAG voltage at 40% duty cycle: 22.0 V MIG/MAG duty cycle 60%: 270 A MIG/MAG voltage at 60% duty cycle: 20.8 V MIG/MAG duty cycle 100%: 220 A MIG/MAG voltage at 100% duty cycle: 18.8 V Manual arc welding current range: 5–300 A Manual arc welding voltage: 20.2–32.0 V Manual arc welding duty cycle 30%: 300 A Manual arc welding voltage at 30% duty cycle: 32.0 V Manual arc welding duty cycle 60%: 260 A Hedpfx Afjy Sxkfsajp Manual arc welding voltage at 60% duty cycle: 30.4 V Manual arc welding duty cycle 100%: 210 A Manual arc welding voltage at 100% duty cycle: 28.4 V Protection rating: IP23 Year of manufacture: 2023 If you have any questions or require further information, please feel free to send us a message or call us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Sheet width 3100 mm Hodpfx Afox Sr Dfeasp Sheet thickness 6.0 mm (steel) Pre-bending 4.0 mm (steel) Upper roller diameter 200 mm Side roller diameter 165 mm Lower roller diameter 190 mm Bending speed approx. 5.0 m/min Control system DIGI Oil capacity 80.0 liters Voltage 380 V Total power requirement 6.0 kW Weight 6000 kg Dimensions (L-W-H) 5250 x 1500 x 1400 mm Very good condition (!!) Current new price approx. €85,000 Special price on request Features: - Robust electro-hydraulic 4-roll plate bending machine * 4-roll design offers a wide range of bending and rolling options - MG swiveling control panel * Operation – control of all rollers / machine axes * Digital position display * Manual operation via joysticks - Two central rollers driven directly by hydromotors - Conical rolling possible by tilting the rollers - Side roller parallelism by torsion shafts - Pre-bending on both sides - Diameters up to 1.1 times the upper roller diameter possible - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Continuous lubrication of all bearings - Sturdy steel welded frame - Electro-hydraulic drop end for easy removal of tubular workpieces - Pressure gauge for rollers - Safety device (safety cable with switch unit) - Operating manual (PDF)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, OEM – Marking Laser (Laser Safety Class 4) The beam source is a 20 watt fiber laser with a wavelength of 1064 nm. The marking area is 120 mm x 120 mm; optionally, sizes up to 300 x 300 mm are available. No external cooling is required. Power supply: 230 VAC / 50 Hz. Hedpfon Atmvjx Afaep Typical applications include laser engraving and material removal. The Weldmark 3 control software is installed on the supplied PC, with Windows 10 Professional as the operating system. The laser head can be adjusted manually. Optionally, software-controlled linear axes and a rotary axis can also be integrated. The control software language is selectable (German, English, French). The laser system is prepared for integration into a higher-level production line, but can also be used as a stand-alone unit. Interfaces for interlock, emergency stop, external laser control, etc., are available for integration. We are happy to provide customer support according to your requirements by arrangement.

Stanje: rabljeno, Leto izdelave: 1992, številka stroja/vozila: 150258, Offer 24348 Technical Data: - Pressing force, steplessly adjustable: 15 t - Stroke, steplessly adjustable: 150 mm - Mandrel bending device up to: 6000 mm - Bending angle mandrel bending: 180° - Drive: 400 V / 4 kW - Required space (approx.): W 1500 x H 1200 x D 1100 / 7500 mm - Weight (approx.): 1500 kg - Bending capacity: - Bending capacity, horizontal bending flat iron: 120 x 10 mm - Tube bending (press process) up to approx.: 1 1/2 “ - Mandrel bending up to: 42 mm - Press brake tools Hedpfeut Uiqjx Afaop - Tube bending tools for horizontal bending - Mandrel bending tools steel approx.: 21.3 R 50; 26.9 R 57; 30 R 67; 33.7 R 72.5; 42.4 R 92.5 mm - Mandrel bending tools plastic approx.: 10 R 60; 12 R 65 + 85; 17.2 R 100; 28 R 65; 33.7 R 120; 36 R 100 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Tehnički podaci: Radna širina: 6500 mm maks. kapacitet savijanja: 10,0 mm maks. nagib savijanja: 7,0 mm Hjdpfxsx Iitis Afajp CNC upravljanje prečnik gornjeg valjka: 420 mm prečnik bočnih valjaka: 315 mm prečnik srednjeg donjeg valjka: 400 mm konusni uređaj za savijanje putem kosog položaja oba bočna valjka pokretni upravljački pult sa digitalnim prikazom hidraulična preklopna ležišta CE oznaka snaga motora: 22 kW dimenzije (dužina x širina x visina): cca. 9200 x 2350 x 1900 mm vlastita težina: cca. 39 tona Dodatna oprema: bočna pomoć za savijanje rotirajuća gornja pomoć za savijanje Stanje: vrlo dobro stanje, malo korišćeno radnih sati: 100 sati Prodavac ne preuzima odgovornost za greške u pisanju ili prenosu podataka. Mašina je po izgledu, tehnici i habanju u skladu sa starošću; polovne mašine se prodaju bez ikakve garancije.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1993, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 280 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, premer valja: 400 mm, dolžina valja: 4.050 mm, delovna širina: 4.000 mm, delovna višina: 1.100 mm, najv. debelina pločevine: 8 mm, najv. debelina jeklene pločevine: 8 mm, maks. debelina pločevine iz nerjavečega jekla: 6 mm, skupna masa: 11.000 kg, skupna dolžina: 6.000 mm, skupna širina: 1.450 mm, skupna višina: 1.510 mm, moč: 11,03 kW (15,00 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, kaljeni valji, nujno zaustavitev, 3-valjni 4000x8 mm stroj za upogibanje pločevine s pred-upogibanjem Hedpfx Afoxnmb Ioajp Model Famar CPI4/6 KAPACITETA širina pločevine 4000 mm debeljina pločevine 8 mm pred-upogibanje 6 mm --- Uporabna širina valjev 4050 mm Zgornji valj premer 300 mm Stranska valja premer 280 mm Površina vseh treh valjev je ojačana (utrditev) Prikaz položaja upogibnih valjev Prednja hidravlična odprta stran za raztovarjanje zaprtega ovoja Podaljšane osi za montažo dodatnih valjev za profilno upogibanje Spremenljiva hitrost valjanja do 5 m/min Pogonski elektromotor 15 KM na hidravlični enoti 15 KM - Napetost 380/50 Varnostne instalacije z zasilno zaustavitvijo Dimenzije 6000x1450 x V 1510 mm Teža 11 t

Stanje: novo, Sheet thickness: 6 mm Bending length: 3100 mm Hjdod Ab Sdopfx Afaep Top roll diameter: 210 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically operated upper cover for easy material removal - Digital display for lower and side roll positions - Hydraulic alignment - Top and bottom rolls are driven by hydraulic system and gearbox - The vertical movements of the lower roll are hydraulically driven - Mobile control panel - Compliant with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 7,070 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!