Durendus Servotiskalnica nakup rabljenega (36)

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 30 t, DURENDUS 30 T Heated Press – Double-Column Press – 700 × 500 mm Heated Platens, Sliding Table The machine shown here was manufactured and delivered as a customised solution for a client. We can manufacture this machine for you again at short notice – including any specific options you may require. This is a hydraulic heated press with electrically heated platens and a manual sliding table, designed for pressing, laminating, and forming processes under the influence of heat. Base price: €23,500 net Options (on request): The listed options are based on completed client projects and allow precise adaptation of the machine to each specific application. The base machine offers a functional standard configuration – in practice, it is often supplemented and configured with project-specific equipment. ==== Technical Data + Information: ==== General Data * Design: Double-column press * Pressing force: 30 t (adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm ==== Working Area * Table dimensions: 700 × 500 mm * Heating platens: 700 × 500 × 65 mm * Daylight opening: max. 800 mm * Table travel: 500 mm (manual) ==== Table & Ram * Ram stroke: 600 mm * Cylinder diameter: Ø 130 mm * Piston rod: Ø 80 mm * 8-point slide guides for parallelism ==== Speeds * Working speed: 9 mm/s * Return speed: 25 mm/s ==== Hydraulics & Drive * Working pressure: max. 240 bar * Pump capacity: 12 l/min * Motor output: 3 kW * Hydraulic tank: 80 l * Pressure accuracy: ±5 bar * Hydraulic system with air cooling ==== Control & Operation * SIEMENS S7-1200 controller with 7" touchscreen * Programmable parameters (stroke, pressure, time, cycles) * Two-hand operation * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 25 kW (incl. heating) ==== Equipment * Electrically heated press platens up to 200 °C * Temperature monitoring with sensors * Passive pressure holding function up to 60 minutes * Hydraulic and electronic overload protection * Safety limit switches * CE certification * Dual-layer coating according to RAL ===== Hot pressing, laminating, plastics processing, rubber and composite material forming, mould pressing Heated press, hydraulic press, double-column press, thermo press, laminating press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual quotation. Our hydraulic presses are manufactured according to the German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the Brazilian national safety guideline NR 12, which builds upon these. Our main strength is custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers. Dcedpfx Aoy H Dtzsplsg

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 500 t, DURENDUS 500 T Workshop Press – C-Frame Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered to a customer. We can manufacture this machine for you at short notice – with individual options as requested. This is a hydraulic workshop press designed for pressing, straightening, and assembly operations in workshop and industrial settings. Base price: €46,950 net Options (on request): The listed options are derived from realized customer projects and allow targeted adaptation of the machine to your specific application. The base machine represents a functional standard version – in practice, it is usually extended with additional equipment and project-specific configurations. * Table plate with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral movement of the press ram (1,000 mm) * Bending tool * Anti-rotation cylinder with manual stroke adjustment * V-profile straightening fixture in combination with the table plate * LED lighting * Foot switch * Cooling ===== Technical Data & Information: Djdpsy H Drwefx Aplscg ==== General Information * Design: Workshop press * Pressing force: 500 t (optionally adjustable) * Total weight: approx. 5,000 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,850 mm ==== Working Area * Clear width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Usable crossbeam width: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 400 mm * Piston rod: Ø 265 mm * Height adjustment: via chain mechanism ==== Speeds * No-load speed: 8.6 mm/s * Return speed: 15.3 mm/s ==== Hydraulics & Drive * Pump output: 65 l/min * Motor power: 30 kW * Hydraulic tank: 150 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Controls & Operation * Manual lever operation * Fine manual tuning via lever * Connection: 400 V / 50 Hz * Total connected load: approx. 32 kW ==== Features * Height-adjustable cross beams with pin locking * Chain mechanism for table adjustment * Manometer for pressure display * Emergency stop switch * CE certification * Dual-layer coating according to RAL ===== Pressing, extracting, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are manufactured in compliance with German Machine Guidelines, European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they also comply with Brazilian safety guideline NR 12, which builds upon these standards. Our core strengths are custom machine engineering and press automation. We supply tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics, we mainly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 400 t, DURENDUS 400 T Workshop Press – Single-Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here was built and delivered as a custom order for a customer. We can manufacture this machine for you at short notice – including individual options tailored to your needs. This is a hydraulic workshop press designed for pressing, straightening, and assembly tasks in workshop and industrial environments. Base price: €35,950 net Options (on request): The listed options are based on customer projects and allow for targeted adaptation of the machine to your specific application. The base machine is a functional standard version – in most cases, it is extended with additional equipment and configured as required for each project. * Table plate with X-shaped T-slot 800 × 1,200 × 120 mm * Adjustable pressure setting * Lateral movement of the press ram (1,000 mm) * Bending tool * Anti-rotation cylinder with manual travel adjustment * V-profile straightening block in combination with table plate * LED lighting * Foot switch * Cooling ===== Technical Data & Information: ==== General Information * Design: Workshop press * Pressing force: 400 t (optionally adjustable) * Total weight: approx. 4,000 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,850 mm ==== Working Area * Clear width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Usable crossbeam width: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 360 mm * Piston rod: Ø 235 mm * Height adjustment: via chain mechanism ==== Speeds * Idle speed: 7.8 mm/s * Return speed: 13.7 mm/s ==== Hydraulics & Drive * Pump capacity: 48 l/min * Motor power: 22 kW * Hydraulic tank: 120 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Manual lever operation * Fine adjustment via hand lever * Connection: 400 V / 50 Hz * Total power consumption: approx. 23 kW ==== Equipment * Height-adjustable crossbeams with bolt locking Dsdpfx Aey H Dn Ejplecg * Chain mechanism for table adjustment * Pressure gauge (manometer) * Emergency stop switch * CE certification * Dual-layer paint, RAL color ===== Press-fitting, removal, assembly, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quotation. Our hydraulic presses are manufactured in accordance with German Machine Directives and European Machinery Directive (Directive 2006/42/EC), as well as EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply fully with the Brazilian national safety directive NR 12, which builds on these standards. Our core strength lies in special machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 300 t, DURENDUS 300 T Workshop Press – Single-Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here was custom-built and delivered to a customer. We can manufacture this machine for you at short notice – including individual options as required. This is a hydraulic workshop press designed for pressing, straightening, and assembly work in workshop and industrial environments. Dedpfx Apjy H Df Rslecg Base price: €22,450 net Options (on request): The options listed are based on actual customer projects and allow the machine to be tailored to specific applications. The base machine is a functional standard version – in most cases, it is supplemented with additional equipment and project-specific configurations. * Table plate with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral slide of ram (1,000 mm) * Bending tool * Anti-twist cylinder with manual travel adjustment * V-profile straightening tool in combination with table plate * LED lighting * Foot pedal * Cooling ===== Technical Data + Information: ==== General Information * Type: Workshop press * Pressing force: 300 t (optionally adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,800 mm ==== Working Area * Clear width: 1,600 mm * Clear depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossbeam usable width: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 330 mm * Piston rod: Ø 205 mm * Height adjustment: via chain mechanism ==== Speeds * Idle speed: 9.3 mm/s * Return speed: 15.2 mm/s ==== Hydraulics & Drive * Pump capacity: 48 l/min * Motor power: 22 kW * Hydraulic tank: 90 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Manual control lever * Fine-tuning via manual lever * Connection: 400 V / 50 Hz * Total connected load: approx. 23 kW ==== Equipment * Height-adjustable crossbeam with pin locking * Chain mechanism for table adjustment * Pressure gauge * Emergency stop switch * CE certification * Two-layer coating according to RAL ===== Pressing, extracting, assembly work, straightening tasks, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Looking for a hydraulic press tailored to your requirements? Contact us for a personalized offer. Our hydraulic presses are manufactured in accordance with German machine directives, European machine directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds on these. Our main strengths are special machine construction and press automation. We offer custom-made hydraulic presses at surprisingly affordable prices. The hydraulics of the presses primarily feature components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 200 t, DURENDUS 200 T Workshop Press – Single-Column Press – 1,500 mm Clear Width, 400 mm Stroke The machine shown here was already custom-built and delivered to a client. We can manufacture this machine for you at short notice – including individual options as needed. This is a hydraulic workshop press for pressing, straightening, and assembly work in both workshop and industrial environments. Base price: €10,750 net Options (on request): The listed options are based on completed customer projects and allow precise adaptation of the machine to specific applications. The base machine is a functional standard version – in practice, it is most often expanded with additional features and configured project-specifically accordingly. - Table plate with X-shaped T-slot, 800 × 1,200 × 120 mm - Pressure adjustment - Lateral travel of the ram (1,000 mm) - Bending tool - Anti-rotation cylinder with manual travel adjustment - V-profile straightening frame in combination with table plate - LED lighting - Foot switch - Cooling ==== Technical Data & Information: ==== General Information Design: Workshop press Pressing force: 200 t (optionally adjustable) Total weight: approx. 2,100 kg Overall dimensions (W × D × H): 2,000 × 900 × 2,750 mm ==== Working Area Clear width: 1,500 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,500 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 280 mm Piston rod: Ø 165 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 7.4 mm/s Return speed: 11.4 mm/s ==== Hydraulics & Drive Pump capacity: 24.5 l/min Motor power: 7.5 kW Hydraulic tank: 54 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Dsdpfx Apey H Ddmsljcg Manual lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 8 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Manometer for pressure indication Emergency stop switch CE certification Dual-layer paint according to RAL ===== For pressing, ejecting, assembly, straightening, workshop applications, maintenance. Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press. Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machine guidelines, as well as European machine directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed both Canadian and European safety requirements as they are fully compliant with the Brazilian national safety guideline NR 12, which builds on these standards. Our core strength is special purpose machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. For the hydraulics of our presses, we predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 180 t, DURENDUS 180 T Workshop Press – Single-Column Press – 1,400 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered on behalf of a customer. We can supply this machine from stock or manufacture a new one for you – with consideration for individual options as desired. This is a hydraulic workshop press designed for pressing, straightening, and assembly work in workshop and industrial applications. Base price: €8,950 net Options (on request): The listed options are based on previous customer projects and allow for a targeted adaptation of the machine to your specific application. The base machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured according to project requirements. • Table plate with X-shaped T-slot 700 × 1,000 × 100 mm • Pressure adjustment Djdsy H A T Tepfx Apljcg • Lateral movement of the ram (900 mm) • Bending tool • Anti-twist cylinder with manual stroke adjustment • V-profile straightening block in combination with table plate • LED lighting • Foot switch • Cooling ==== Technical Data + Information: == General Information Design: Workshop press Pressing force: 180 t (optionally adjustable) Total weight: approx. 1,700 kg Overall dimensions (W × D × H): 1,900 × 900 × 2,700 mm == Working Area Clear width: 1,400 mm Open depth: 400 mm Installation height: 250–900 mm (variable) == Table & Ram Crossbeam usable width: 1,400 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 240 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism == Speeds Idle speed: 8.1 mm/s Return speed: 11.8 mm/s == Hydraulics & Drive Pump capacity: 22 l/min Motor power: 7.5 kW Hydraulic tank: 42 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC == Control & Operation Manual lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 8 kW == Features Height-adjustable crossbeams with pin locking Chain mechanism for table adjustment Manometer for pressure indication Emergency stop switch CE certification Dual-layer coating according to RAL ===== Pressing, pressing out, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety regulation NR 12, which builds on these standards. Our main strengths are special machine construction and press automation. We supply custom-designed hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 150 t, DURENDUS 150 T Workshop Press – Single-column Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered as a custom order for a customer. We can supply this machine from stock or manufacture it to your specifications – including individual options as required. This is a hydraulic workshop press designed for pressing, straightening, and assembly work in workshops and industrial environments. Base price: €6,900 net Options (on request): The listed options are based on completed customer projects and allow you to tailor the machine to your specific application. The base machine is a functional standard version – in practice, it is usually upgraded with additional equipment and configured according to project requirements. - Table plate with X-shaped T-slot 700 × 1,000 × 100 mm Dcsdpfx Asy Hrkusplog - Pressure adjustment - Lateral movement of the press ram (900 mm) - Bending tool - Anti-rotation cylinder with manual travel adjustment - V-profile straightening block combined with table plate - LED lighting - Foot switch - Cooling ==== Technical data & information: ==== General Information Design: Workshop press Press force: 150 t (optionally adjustable) Total weight: approx. 1,400 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,650 mm ==== Working area Clear width: 1,250 mm Clear depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 230 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8 mm/s Return speed: 12.2 mm/s ==== Hydraulics & Drive Pump capacity: 20 l/min Motor power: 5.5 kW Hydraulic tank: 34 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Manual lever control Fine manual adjustment via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 6 kW ==== Equipment Height-adjustable crossbeam with bolt locking Chain mechanism for table adjustment Pressure gauge Emergency stop switch CE certification Two-coat paint finish according to RAL ===== Pressing, pressing-out, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety standards by fully complying with the national Brazilian safety regulation NR 12, which is based on them. Our main strength lies in special machine construction and press automation. We supply custom-designed hydraulic presses at surprisingly competitive prices. Press hydraulic systems are generally equipped with components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 120 t, DURENDUS 120 T Workshop Press – Single-column Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here was already built and delivered to a customer. We can supply this machine from stock or manufacture it new – including individual options upon request. This is a hydraulic workshop press for pressing, straightening, and assembly tasks in workshop and industrial environments. Base price: €6,450 net Options (on request): The listed options are based on completed customer projects and allow precise adaptation of the machine for specific applications. The base machine is a functional standard version – in practice, it is usually enhanced with additional equipment and configured specifically for each project. • Table plate with X-shaped T-slot 700 × 1,000 × 100 mm • Pressure adjustment • Lateral slide of the press ram (900 mm) • Bending tool • Anti-rotation cylinder with manual travel adjustment • V-profile straightening block in combination with table plate • LED lighting • Foot switch • Cooling ==== Technical Data + Information: ==== General Information Design: Workshop press Pressing force: 120 t (optionally adjustable) Total weight: approx. 1,300 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,550 mm ==== Working Area Clear width: 1,250 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 200 mm Piston rod: Ø 125 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 7.7 mm/s Dsdpfx Apey Hqwgslocg Return speed: 12.6 mm/s ==== Hydraulics & Drive Pump capacity: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Hand lever operation Manual fine tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 4.5 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Manometer for pressure indication Emergency stop switch CE certification Two-coat paint finish according to RAL ===== Pressing, drawing out, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machine guidelines, the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements as they fully comply with all aspects of the Brazilian national safety directive NR 12, which is based on these standards. Our key strength is custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly competitive prices. The hydraulics of our presses primarily utilize components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 100 t, DURENDUS 100 T Workshop Press – C-Frame Press – 1,000 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered for a customer order. We can supply you with this machine from stock or manufacture it new – tailored with individual options upon request. This is a hydraulic workshop press for pressing, straightening, and assembly operations in workshop and industrial environments. Base price: €5,990 net Options (on request): The options listed are based on real customer projects and allow precise adaptation of the machine to your specific application. The base machine is a functional standard version – in practice, it is usually enhanced and configured with additional equipment according to project requirements. • Table plate with X-shaped T-slot 650 × 900 × 90 mm • Pressure adjustment • Lateral displacement of the press ram (700 mm) • Bending tool • Anti-twist cylinder with manual stroke adjustment • V-profile straightening block in combination with table plate • LED lighting • Foot switch • Cooling ==== Technical Data + Information: ==== General Information Design: Workshop press Pressing force: 100 t (adjustable, optional) Total weight: approx. 900 kg Overall dimensions (W × D × H): 1,600 × 900 × 2,550 mm ==== Working Area Clear width: 1,000 mm Open depth: 350 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,000 / 620 mm Ram stroke: 400 mm Cylinder diameter: Ø190 mm Piston rod: Ø115 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8.5 mm/s Return speed: 13.4 mm/s ==== Hydraulics & Drive Pump capacity: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Dcjdpfxjy Hqqae Aplsg Hydraulic system: DUPLOMATIC ==== Control & Operation Manual lever operation Manual fine adjustment via lever Power supply: 400 V / 50 Hz Total connected load: approx. 4.5 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Pressure gauge Emergency stop switch CE certification Dual-layer coating according to RAL ===== Pressing, extracting, assembly tasks, straightening work, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, single-column press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are built in accordance with German machine directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety requirements. Additionally, our presses exceed Canadian and European safety regulations, as they comply fully with the Brazilian national safety standard NR 12, which is based on these benchmarks. Our core strengths are custom machine building and press automation. We offer customized hydraulic presses at surprisingly attractive prices. For the hydraulic systems, we mainly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 80 t, DURENDUS 80 T Workshop Press – Single-Column Press – 900 mm Clear Width, 400 mm Stroke The machine shown here has already been manufactured and delivered for a customer order. We can supply you with this model from stock or manufacture a new unit – also taking individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly tasks in workshop and industrial environments. Base price: €4,990 net Dodpjy Hqlqsfx Aplecg Options (on request): The listed options are based on realized customer projects and allow precise adaptation of the machine to each specific application. The base model represents a functional standard specification – in practice, it is enhanced in most cases with additional equipment and project-specific configurations. - Table plate with X-shaped T-slot 600 × 900 × 30 mm - Pressure adjustment - Lateral displacement of the press ram (600 mm) - Bending tool - Anti-rotation cylinder with manual travel adjustment - V-profile straightening frame combined with table plate - LED lighting - Foot switch - Cooling ==== Technical Data & Information: ==== General Information Model: Workshop press Pressing force: 80 t (optionally adjustable) Total weight: approx. 800 kg Overall dimensions (W × D × H): 1,400 × 900 × 2,450 mm ==== Working Area Clear width: 900 mm Clear depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Cross beam usable width: 900 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 180 mm Piston rod: Ø 100 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 7.5 mm/s Return speed: 10.9 mm/s ==== Hydraulics & Drive Pump capacity: 11.5 l/min Motor power: 3 kW Hydraulic tank: 24 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Manual lever operation Fine manual adjustment via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 3.5 kW ==== Features Height-adjustable cross beams with pin locking Chain mechanism for table adjustment Manometer for pressure indication Emergency stop switch CE certification Two-coat painting according to RAL ===== Pressing, removal, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quotation. Our hydraulic presses are manufactured according to German machinery guidelines and European machinery directives (Directive 2006/42/EC), the EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they comply fully with the national Brazilian safety guideline NR 12, which builds on these standards. Our core strength is special-purpose machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. For the hydraulics of our presses, we predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 60 t, DURENDUS 60 T Workshop Press – C-Frame Press – 900 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered to a customer order. We can supply this machine from stock or manufacture it new – gladly incorporating individual options. This is a hydraulic workshop press suitable for pressing, straightening, and assembly work in workshop and industrial environments. Base Price: €4,550 net Options (on request): The listed options are based on completed customer projects and allow for a targeted adaptation of the machine to the respective application. The base machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured to project-specific requirements. - Table plate with X-shaped T-slot 600 × 900 × 30 mm - Pressure adjustment - Lateral movement of the press ram (600 mm) - Press brake tooling - Anti-rotation cylinder with manual travel setting - V-profile straightening support in combination with table plate - LED illumination - Foot switch - Cooling ===== Technical Data & Information: ==== General Information Design: Workshop press Pressing force: 60 t (optionally adjustable) Total weight: approx. 750 kg Overall dimensions (W × D × H): 1,400 × 900 × 2,450 mm ==== Working Area Clear width: 900 mm Clear depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 900 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 150 mm Piston rod: Ø 95 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8 mm/s Return speed: 13.4 mm/s ==== Hydraulics & Drive Pump capacity: 8.5 l/min Motor power: 2.2 kW Hydraulic reservoir: 22 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Manual hand lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 2.5 kW ==== Equipment Height-adjustable crossbeams with pin locking Djdpfxsy Hi D Eo Aplocg Chain mechanism for table adjustment Pressure gauge Emergency stop switch CE certification Two-coat finish to RAL ===== Pressing, removing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in compliance with German machinery directives, European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety guideline NR 12, which builds on these standards. Our key strength is special purpose machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. Leading European components are primarily used for the hydraulic systems of our presses.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 30 t, DURENDUS 30 T Workshop Press – Single-Column Press – 700 mm Clear Width, 400 mm Stroke The machine shown here was already manufactured and delivered as a customer order. We can supply this machine from stock or manufacture a new one for you—customized options upon request. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial settings. Base price: €3,550 (net) Options (on request): The listed options are based on completed customer projects and allow targeted customization of the machine for specific applications. The base machine is supplied in a functional basic version—in practice, it is most often extended with additional features and configured specifically for each project. - Table plate with X-shaped T-slot (from 60 t) - Pressure adjustment - Lateral slide of the press ram (from 60 t) - Bending tool (from 60 t) - Anti-twist cylinder with manual travel adjustment - V-profile straightening fixture in combination with table plate - LED lighting - Foot switch - Cooling ==== Technical Data & Information: ==== General Information Design: Workshop Press Pressing Force: 30 t (adjustable, optional) Total Weight: approx. 500 kg Overall Dimensions (W × D × H): 1,150 × 700 × 2,350 mm ==== Working Area Clear Width: 700 mm Open Depth: 300 mm Installation Height: 250–900 mm (variable) ==== Table & Ram Transverse Beam Usable Width: 700 / 570 mm Dsdjy Hixcspfx Aplscg Ram Stroke: 400 mm Cylinder Diameter: Ø 115 mm Piston Rod: Ø 65 mm Height Adjustment: Chain mechanism ==== Speeds Idle Speed: 10.4 mm/s Return Speed: 15.3 mm/s ==== Hydraulics & Drive Pump Flow: 6.5 l/min Motor Power: 1.5 kW Hydraulic Tank: 14 l Pressure Accuracy: ±5 bar Hydraulic System: DUPLOMATIC ==== Control & Operation Manual lever control Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 2 kW ==== Features Height-adjustable cross beams with bolt locking Chain mechanism for table adjustment Pressure gauge Emergency stop switch CE certification Double-layer coating according to RAL ===== Pressing, extracting, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Looking for a hydraulic press tailored to your requirements? Contact us for a custom quote. Our hydraulic presses are manufactured according to German machinery guidelines as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they also meet all aspects of the Brazilian national safety regulation NR 12, which builds upon these standards. Our core strength is custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics, we mainly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 20 t, DURENDUS 20 T Workshop Press – Single-Column Press – 600 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered according to a customer order. We can supply you with this machine from stock or manufacture it new – tailored to your individual requirements. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Base price: €3,120 net Options (on request): The listed options are based on realized customer projects and allow for targeted adaptation of the machine to your specific application. The base machine is a functional standard version – in practice, it is usually supplemented with additional equipment and project-specific configurations. * Table plate with X-shaped T-slot (from 60 t) * Adjustable pressure regulation * Lateral movement of the press ram (from 60 t) * Bending tool (from 60 t) * Anti-rotation cylinder with manual travel adjustment * V-profile straightening support in combination with table plate * LED lighting * Foot switch * Cooling ===== Technical Data + Information: ==== General Specifications * Design: Workshop Press * Pressing force: 20 t (optionally adjustable) * Total weight: approx. 350 kg * Overall dimensions (W × D × H): 1,100 × 700 × 2,350 mm ==== Working Area Dodpfx Asy E Nnnspljcg * Clear width: 600 mm * Open depth: 200 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Usable width of crossbeam: 600 / 470 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 90 mm * Piston rod: Ø 50 mm * Height adjustment: via chain mechanism ==== Speeds * Idle speed: 7.8 mm/s * Return speed: 11.3 mm/s ==== Hydraulics & Drive * Pump capacity: 3 l/min * Motor output: 0.75 kW * Hydraulic tank: 12 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Manual lever operation * Fine manual adjustment via control lever * Connection: 400 V / 50 Hz * Total connected load: approx. 1 kW ==== Equipment * Height-adjustable crossbeam with pin locking * Chain mechanism for table adjustment * Pressure gauge * Emergency stop switch * CE certification * Dual-layer paint in accordance with RAL ===== Pressing, extracting, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your particular application? Contact us for a customized offer. Our hydraulic presses are built in compliance with German machinery guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety guideline NR 12, which builds upon these standards. Our main strength lies in special-purpose machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics of our presses, we predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 125 t, Single-column press – Manufacturer Durendus – 125 t servo press – Table 2200 × 750 mm For sale is a hydraulic C-frame servo press from Durendus, offering an adjustable pressing force up to 125 t and an integrated 50 t ejector. Thanks to state-of-the-art servo-hydraulics, this machine provides up to 40% lower energy consumption compared to conventional systems, making it ideal for demanding assembly, forming, and production processes. ==== Technical specifications and information: Hydraulic servo press – C-frame – 125 t ==== General information - Manufacturer: Durendus - Model: Single-column press / Servo press - Design: C-frame press - Pressing force: 20 – 125 t (adjustable) - Machine weight: approx. 8,700 kg - Dimensions (W × D × H): approx. 2,400 × 2,000 × 3,300 mm - Table height: 870 mm - Installation height: max. 1,000 mm ==== Table & Ram - Table size: 2,200 × 750 mm - Ram size: 980 × 750 mm - Guidance: 4 guide columns Ø 100 mm - Tool centering: 50 mm receptacle - Provision: Anti-vibration plates (30 mm) Dcedpox Aqtqofx Aplog - Provision: Robot interface ==== Ejector - Ejector force: 50 t - Ejector stroke: 200 mm ==== Hydraulic cylinder - Stroke: 0 – 700 mm (adjustable) - Working pressure: max. 245 bar - Return speed: 300 mm/s - Idle speed: 300 mm/s - Pressing speed: - up to 25% load: 25 mm/s - up to 50% load: 14 mm/s - up to 80% load: 7 mm/s - up to 100% load: 6 mm/s ==== Hydraulic unit - Servo-hydraulic pump: Duplomatic, 143 l/min - Servo motor power: 15 kW - Pressure accuracy: ± 5 bar - Feed valve: NG-160 ===== Assembly operations, forming technology, series production, automated manufacturing, toolmaking, press applications with energy optimization Servo press, single-column press, C-frame press, hydraulic press, industrial press, production press, energy-efficient press, die spotting press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses surpass both Canadian and European safety requirements by fully complying with the Brazilian safety standard NR 12, which builds upon these norms. Our core strength lies in the design of special-purpose machinery and automation for presses. We offer bespoke hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 200 t, DHS-200 – 200 T Hydraulic Heated Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a DHS-200 hydraulic heated press with a press force of 200 T and an extendable sliding table system. The machine is equipped with heating plates measuring 800 × 800 mm, an open height of 800 mm, and a hydraulic stroke of 600 mm, making it particularly suitable for laminating, forming, and thermal pressing applications with temperature-controlled tools. ==== Technical Data + Information: Hydraulic Heated Press DHS-200 – 200 T ==== General Specifications - Design: Hydraulic heated press with sliding table - Press force: 200 T - Usable table area: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm - Open width: 900 mm - Open height: 800 mm - Extendable table travel: 800 mm - Table height: 900 mm - Overall dimensions (W×D×H): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg - Machine frame: Welded steel construction ==== Hydraulic Cylinder - Piston stroke: 600 mm - Piston rod Ø: 380 mm - Cylinder Ø: 180 mm - Max. working pressure: 260 bar ==== Hydraulic Power Unit - Return speed: 22 mm/s - Idle speed: 10 mm/s - Hydraulic pump: ASC - Flow rate: 42 l - Motor power: 7.5 kW - Power unit: mounted beside the press - Hydraulic manifold / valves: Duplomatic - Air cooling - Adjustable pressure - Manual limit sensors - Cam switch for stroke limitation - Passive pressure holding up to 60 minutes ==== Heating System - Electrically heated steel plates - Heating power: 27 kW - Temperature range up to 250 °C - Temperature sensors: 2 per heating plate Dcedpfxsyuvrdo Aplog - Temperature fluctuation: approx. 5–10 °C ==== Control System - Two-hand operation - Ram return via control button - Stroke limitation via cam switch - Pressure adjustment by rotary valve - CE certificate and user manual included ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Heating elements per plate: 18 units - Total heating power: 27 kW - Hydraulic motor connection: 7.5 kW - Total connected load: approx. 40 kW ===== Plastic processing, laminating applications, composite materials, rubber and elastomer processing, compression molding, thermal pressing, hot pressing processes Hydraulic press, hydraulic heated press, heated press, sliding table press, 200-ton press, 200 T press, laminating press, plastics press, molding press, vulcanizing press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our core strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. For the hydraulic components, we primarily use parts from leading European manufacturers.

Stanje: novo, stiskalna sila: 200 t, DURENDUS 200 T Deep Drawing Press – DoubleColumn Press – 900 × 900 mm Table, 80 T Drawing Cushion The machine shown here was built and delivered to customer order. We can manufacture this machine for you at short notice – including individual options upon request. This is a hydraulic deep drawing press with an integrated drawing cushion function for forming processes, drawing operations, and precise sheet metal working. Base price: €76,000 net Options (on request): The listed options are based on realized customer projects and enable targeted customization of the machine for the specific application. The basic machine is a functional standard version – in practice, it is usually extended with additional equipment and configured specifically for the project. * T-slots and drill holes according to customer specification * Adjustment of stroke, installation height, and press force range * Extended drawing cushion configuration * Individual control adaptations * Extended safety and monitoring systems ===== Technical Data + Information: ==== General Information * Design: Double-column press * Press force: 40–200 t (adjustable) * Total weight: approx. 5,500 kg * Overall dimensions (W × D × H): 2,370 × 1,300 × 3,300 mm ==== Working Area * Table size: 900 × 900 mm * Ram face: 900 × 900 mm * Installation height: max. 800 mm ==== Table & Ram * Table height: 1,000 mm * Ram stroke: 0–500 mm (adjustable) Dcedpfx Apeyzf A Hjleg * Column guide: 4 columns Ø 120 mm ==== Speeds * Pressing speed: 4–10 mm/s * Idle speed: 10 mm/s * Return speed: 16 mm/s * Drawing cushion speed: 20 mm/s ==== Hydraulics & Drive * Operating pressure: max. 260 bar * Pump capacity: 70 l/min * Servo motor power: 15 kW * Pressure accuracy: ±5 bar * Hydraulic system with air cooling and oil monitoring ==== Control & Operation * Two-hand operation * Operating mode selector switch (key switch) * Operating modes: Setup, manual cycle * Connection: 400 V / 50 Hz * Total connected load: approx. 20 kW ==== Equipment * Drawing cushion: 30–80 t, stroke 200 mm * CE-compliant design * Safety limit switches * Hydraulic interlock * Control cabinet IP54 with branded components (SIEMENS, ALLEN BRADLEY, SICK) * Two-coat paint finish according to RAL ===== Deep drawing, sheet metal forming, forming technology, draw part production, series production, metalworking Deep drawing press, hydraulic press, double-column press, drawing cushion press, forming press, sheet metal press Are you looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are manufactured in accordance with German Machinery Guidelines as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations.

Stanje: novo, stiskalna sila: 200 t, DURENDUS DPS-200 – Hydraulic Portal Straightening Press – 200 t – 1,500 × 2,000 mm The machine shown here has already been built to customer order and delivered. We can manufacture this machine again for you on short notice. This is a hydraulic portal straightening press from DURENDUS with a maximum pressing force of 200 t. The machine features a table size of 1,500 × 2,000 mm, a maximum installation height of 800 mm, and a stroke of 400 mm, making it ideally suited for straightening work, pressing operations, as well as applications in structural steelwork and toolmaking. Options (on request): The listed options are based on realized customer projects and allow targeted adaptation of the machine to specific applications. The base machine is supplied in a functional basic configuration – in practice, it is usually extended with additional equipment and configured according to project-specific requirements. Examples: * Siemens S7-1200 PLC + 7" screen * Wireless remote control * Safety edge at the bottom of the portal columns (600 mm) * T-slotted table * Motorized bridge travel * Extended travel distance * Increased open height * Light curtain at the base below the bridge * Laser distance measurement * Lifting cylinder in the table ##### Technical Data + Information: Hydraulic Portal Straightening Press – 200 t – 1,500 × 2,000 mm ==== General Specifications Manufacturer: DURENDUS Model: DPS-200 Design: Portal Press / H-Frame Pressing Force: 200 t (adjustable) Total Weight: approx. 8,500 kg Dimensions (W × D × H): approx. 2,450 × 2,200 × 2,750 mm Distance between columns: 1,580 mm Table height: 900 mm ==== Working Area Table size: 1,500 × 2,000 mm Max. installation height: 800 mm Ram stroke: 400 mm Dcodpoyzfuisfx Apleg Ram extension: 300 mm ==== Motion System Lateral cylinder adjustment: ±750 mm Bridge travel: 1,500 mm Operation: manually adjustable (cylinder and bridge) ==== Hydraulic Cylinder Max. working pressure: 320 bar Working speed: 9 mm/s Return speed: 17 mm/s ==== Hydraulics & Drive Motor power: 15 kW Pump capacity: 32 l/min Tank capacity: 140 l Hydraulic components: DUPLOMATIC Filters: FILTREC Cooling: Air cooler ==== Control System Operation: manual via hand lever valve Safety PLC integrated Components: SIEMENS Optional: PLC S7-1200 with 7" touchscreen, recipe management, pressure and travel control ==== Safety Hydraulic overload protection Electronic overload protection End position switches (upper/lower) CE-compliant design ==== Electrical Connection Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Total power consumption: approx. 18 kW Control cabinet: IP54 ##### Fields of application: straightening, pressing, forming, tool setting, steel construction, metal construction, mold making, automotive Hydraulic press, portal press, straightening press, H-frame press, 200 t press, tryout press, tool adjustment press, tool try-out press, adjustable press, heavy-duty press The images shown are for sample purposes and may differ from the actual machine configuration.

Stanje: novo, stiskalna sila: 1.100 t, 1100 t Servo Double-Column Heated Press with Heating Plates We can offer you this press at a particularly favorable price, as the machine is already under construction and the original customer has withdrawn from the order for two identical machines. This creates an opportunity to acquire a high-quality servo-hydraulic double-column press with heating plates on attractive terms and with a comparatively short delivery time. The photos shown display similar, already manufactured machines from our production and serve as sample images. Technical Data & Information: ==== General Specifications Pressing force: 1,100 t Design: Servo double-column heated press Main cylinder: 1 Auxiliary cylinders: 2 Guidance: 4-column guides (Ø 150 mm) Clear width between uprights: 1,600 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. damping plates and heating plate: 1,000 mm Overall height approx.: 4,600 mm Width approx. with control cabinet: 3,250 mm Depth approx.: 1,700 mm Weight approx.: 41,000 kg ==== Table & Ram Lower fixed table with T-slots: 1,600 × 1,100 mm Ram with T-slots: 1,500 × 1,100 mm Heating plate: 1,100 × 1,100 × 140 mm ==== Speeds Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s ==== Hydraulics & Drive/Electrics Hydraulic power unit: Duplomatic Hydraulic pump: Bosch Rexroth / Baumüller / Servo Pump capacity: 240 l/min Motor power: 32 kW Servo hydraulics: included Control: Siemens S7-1200 with Siemens Touchscreen Display MTP 1000 Programming: up to 50 programs Position measurement: Encoder Pressure measurement: Data logging ==== Equipment Digital control for stroke, pressure, speed, and switching positions Passive pressure hold up to 15 minutes Heated plates electrically heated up to 250 °C Heating capacity: 60 kW Temperature monitoring and heating rod control via monitor Piece counter Dcedpfx Apeyyna Sslsg Alarm management Downward accuracy: 0.1 mm Travel limitation via Leuze measuring rod and monitor Two-hand operation Ram return via control button Light curtain safety at front and rear up to 1,900 mm height CE certificate and user manual included Control cabinet with Siemens components Safety technology by Sick / Pilz / Keyence / Datalogic ==== Additional Included Equipment 40 mm thick base plate with beveled ramp 4 vibration damping plates Energy-saving servo hydraulics Applications: Heated presses, compression moulding presses, presses with temperature-controlled processes, plastics processing, composite materials, technical molded parts, laminating processes, industrial high-volume manufacturing, special purpose machinery Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, compression press, press with heating plates, industrial machinery, special purpose machine, tool tryout press, tryout press, tool try out press

Stanje: novo, stiskalna sila: 280 t, 280 t Servo Double-Column Heated Press with Heating Plates We can offer you this press at a particularly attractive price as the machine is already in production and the original customer has withdrawn from the order for two identical units. This provides the opportunity to acquire a high-quality servo-hydraulic double-column press with heating plates under favorable conditions and with comparatively short lead times. The photos shown display similar machines built at the plant and serve as sample images. Technical Data & Information: ==== General Specifications Pressing force: 280 t Design: Servo double-column heated press Main cylinder: 1 Auxiliary cylinders: 2 Guide system: 4 column guides Clear distance between columns: 1,250 mm Stroke of cylinder: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. damping and heating plates: 900 mm Overall height approx.: 3,500 mm Width approx. with control cabinet: 2,200 mm Depth approx.: 1,200 mm Weight approx.: 13,000 kg ==== Table & Ram Lower fixed table with T-slots: 1,250 × 800 mm Ram with T-slots: 700 × 800 mm Heating plate: 600 × 600 × 80 mm ==== Speeds Approach speed: 100 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec ==== Hydraulics & Drive/Electrics Hydraulic unit: Duplomatic Hydraulic pump: Rexroth / Baumüller / Servo Pump output: 72 l/min Motor power: 10 kW Servo-hydraulics: included Control: Siemens S7-1200 with Siemens touchscreen display MTP 1000 Programming: up to 50 programs Travel measurement: Encoder Pressure measurement: Data acquisition ==== Equipment Digital control for stroke, pressure, speed, and changeover positions Passive pressure hold function up to 15 minutes Electrically heated plates up to 250 °C Heating capacity: 24 kW Temperature monitoring and heater rod control via monitor Piece counter Alarm management Downward accuracy: 0.1 mm Dcedpfoyynalsx Apleg Travel limit via Leuze measuring rod and monitor Two-hand operation Ram return via control button Safety light curtains front and rear up to 2,500 mm height CE certificate and operator manual included Control cabinet with Siemens components Safety technology by Sick / Pilz / Keyence / Datalogic ==== Included Additional Equipment 40 mm thick base plate with beveled ramp 4 vibration damping pads Energy-efficient servo hydraulics Applications: Heated presses, compression molding, presses with temperature-controlled process, plastics processing, composites, technical molded parts, laminating processes, industrial special applications Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, forming press, press with heating plates, industrial machine, special purpose machine, tool matching press, tryout press, tool tryout press

Stanje: novo, stiskalna sila: 100 t, hod: 400 mm, Oprema: CE označba, dokumentacija / priročnik, - Capacity: 100 tonnes - Cylinder stroke: 400 mm Dcsdsuynpxspfx Apleg - Working width: 1,000 mm - Cylinder can be moved to the left and right - Electrically or manually operated - Pressure gauge - Emergency stop - 400 V

Stanje: novo, stiskalna sila: 300 t, 300 t Gantry Straightening Press – Gantry Press – 3,500 × 2,000 mm Table, 1,000 mm Open Height The machine shown here was already built to customer specification and delivered. We can manufacture a new machine for you at very short notice – gladly with consideration of your individual requirements. This is a hydraulic gantry press with 300 t pressing force for straightening, assembly, and machining processes on large-scale components. Base price: €142,000 net Options (on request): The listed options are based on realized customer projects and allow precise customization of the machine for the respective application. The basic machine represents a functional standard version – in practice, it is expanded in most cases with additional features and configured according to the specific project. - Table plate with T-slots according to DIN 650 Dedpfx Apoyxnzyolocg - 75 mm table plate - Servo hydraulics (energy-efficient operation) - SIEMENS S7-1200 control system with 7" touch panel - Radio remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various designs available) ===== Technical Data + Information: ==== General Information Design type: Gantry press Pressing force: 300 t (adjustable) Total weight: approx. 10,500 kg Overall dimensions (W × D × H): 3,285 × 3,520 × 3,500 mm ==== Working Area Table size: 3,500 × 2,000 mm Open height: 1,000 mm Frame gap: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Cylinder transverse travel: ±900 mm Longitudinal portal travel: 3,000 mm ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump output: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: pendant control Optional: SIEMENS S7-1200 control system Power connection: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Equipment - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Drag chain system - Two-coat finish (RAL colors selectable) ===== Applications: Straightening of large steel components, vehicle construction, maintenance, assembly work, special constructions Gantry press, straightening press, hydraulic press, 300 ton press, large table press, metalworking Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety directive NR 12, which builds upon these standards. Our great strength lies in special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Stanje: novo, stiskalna sila: 300 t, 300 t Gantry Straightening Press – Gantry Press – 3,000 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered as a customer order. We can manufacture this machine as a new unit at short notice – including customized options upon request. This is a hydraulic gantry press with 300 t pressing force for straightening, assembly, and processing operations on large-format components. Base price: €102,000 net Options (upon request): The listed options are based on realized customer projects and enable targeted adaptation of the machine to the respective application. The base machine represents a functional standard version—in practice, it is commonly complemented with additional features and configured project-specifically. - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 control with 7'' touch panel - Wireless remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (multiple versions) ==== Technical Data + Information: ==== General Specifications Design: Gantry press Pressing force: 300 t (adjustable) Total weight: approx. 8,500 kg Overall dimensions (W × D × H): 3,285 × 3,020 × 3,500 mm ==== Working Area Table size: 3,000 × 2,000 mm Open height: 1,000 mm Frame clearance: 2,100 mm Dcedpfx Apeyxnw Ujleg ==== Table & Ram Table height: 750 mm (excluding table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transversal cylinder travel: ±900 mm Longitudinal gantry travel: 2,500 mm ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Gantry traverse speed: max. 33 mm/s ==== Hydraulics & Drive Pump output: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: manual pendant control Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total power consumption: approx. 15 kW ==== Equipment - CE certification - Safety limit switches - Overload protection (electric & hydraulic) - Cable drag chain system - Dual-layer paint (RAL colors selectable) ===== Straightening of steel components, vehicle construction, maintenance, assembly work, special structures Gantry press, straightening press, hydraulic press, 300 ton press, industrial press, metalworking Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German Machinery Guidelines, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazil’s national safety standard NR 12, which builds upon these regulations. Our main strength is custom machine construction and press automation. We offer tailored hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 100 t, Durendus DCD-100 – Hydraulic Deep Drawing Press, C-Frame, 15–100 t, 800 × 600 mm For sale is a single-column hydraulic press with deep drawing functionality (C-frame, C-type press) from manufacturer Durendus, featuring an adjustable pressing force from 15 to 100 t. This machine is designed for demanding forming, deep drawing, and assembly processes, and is equipped with an integrated deep drawing cushion and a modern Siemens control unit. Thanks to high travel speeds and precise control, it is suitable both for series production and for flexible single applications. Dcsdeyw I T Hjpfx Apleg ==== Technical Data & Information: Hydraulic Single-Column Press – DCD-100 ==== General Information - Manufacturer: Durendus - Model: DCD-100 - Type: C-Frame / Single-Column Press - Pressing Force: 15–100 t (adjustable) - Total Weight: approx. 6,500 kg - Overall Dimensions: approx. 1,850 × 1,845 × 3,520 mm - Table Height Above Floor: 1,000 mm ==== Working Area - Max. Distance Table to Ram: 1,000 mm - Stroke: 0–700 mm (adjustable) ==== Table & Ram - Table Size: 800 × 600 mm - Ram Size: 800 × 600 mm - T-Slots: according to DIN 650, 18 mm, cross arrangement ==== Speeds - Idle Speed: 180 mm/s - Working Speed: 22 mm/s - Return Speed: 180 mm/s ==== Hydraulics & Drive - Operating Pressure: max. 250 bar - Main Pump: Bosch Rexroth, approx. 65 l/min - Motor Power: 11 kW + 1.5 kW - Oil Tank Volume: approx. 280 l - Hydraulic Block: Duplomatic - Filter: Filtrec - Cooling: Air cooler ==== Additional Functions - Deep Drawing Cushion: 50 t, stroke 250 mm, speed 50 mm/s - Ejector in Ram: 10 t, stroke 100 mm ==== Control & Operation - PLC: Siemens S7-1200 - Touch Panel: Siemens SIMATIC 10" - Programmable: up to 99 programs - Adjustable: pressure, stroke, speed, lubrication - Positioning Accuracy: up to 0.1 mm - Remote maintenance possible ==== Safety & Equipment - Two-hand operation - Safety PLC - Monitoring of all operating states via display - Oil temperature and filter monitoring - Automatic shutdown in case of overheating ===== Deep drawing, forming, assembly work, punching processes, series production, toolmaking Single-column press, C-frame press, deep drawing press, hydraulic press, industrial press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are built according to German machinery guidelines, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety regulation NR 12, which builds upon these standards. Our core strength lies in custom machine building and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. Our presses mainly use components from leading European manufacturers for their hydraulics.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 20 t, C-frame press – Manufacturer: Durendus – 3–20 t hydraulic press – table 1000 × 400 mm For sale is a hydraulic C-frame single-column press by Durendus with an adjustable pressing force of 3 to 20 t. This compact and robust machine is ideally suited for assembly, pressing, and light forming tasks in workshops and production environments. Djdpfox Ap Utex Aplocg ==== Technical Data & Information: Hydraulic C-frame Press – 3–20 t ==== General Information - Manufacturer: Durendus - Model: Assembly Press / Single-Column Press - Design: C-frame press - Pressing force: 3 – 20 t (adjustable) - Machine weight: approx. 1,200 kg - Paint finish: RAL 7035 (light grey) / RAL 2009 (orange) ==== Working Area - Max. distance table to ram: 500 mm - Stroke / travel: 500 mm - Table height: 940 mm ==== Table & Ram - Table plate: 1,000 × 400 × 40 mm - Ram: Ø 250 mm, round, interchangeable ==== Speeds - Downstroke speed: 2 – 10 mm/s (adjustable) - Upstroke speed: 20 mm/s ==== Hydraulics - Motor power: 2.2 kW - Oil tank capacity: 60 l - Pump: Agro-Hytos or equivalent ==== Features & Operation - Pressure adjustment via rotary knob - Robust machine frame - Control cabinet technology from renowned manufacturers - Emergency stop switch ==== Documentation & Delivery - CE Declaration of Conformity - German-language documentation - Assembly, commissioning, and training available at extra cost ==== Assembly work, press-fitting, workshop applications, small batch production, light forming operations C-frame press, single-column press, hydraulic press, shop press, assembly press, industrial press, die setting press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised offer. Our hydraulic presses are built according to German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all respects with the national Brazilian safety directive NR 12, which is based on these standards. Our main strength is bespoke machinery and press automation. We supply custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 300 t, dolžina mize: 1.800 mm, širina mize: 1.100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a powerful hydraulic vulcanizing press from Durendus with a pressing force of 300 t. This machine features large-format heating plates of 1,800 × 1,100 mm, a clear column width of 2,100 mm, a stroke of 600 mm, and is especially suited for large area vulcanization, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Information - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Pressing force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm Dcodex Ap Itopfx Aplog - Stroke: 600 mm - Table height above floor (including heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower) with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Option 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Option 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastic processing, laminating processes, large-format compression molding, thermal pressing, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, compression molding press, thermo press, heavy-duty press, tryout press, tool tryout press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses surpass both Canadian and European safety requirements, as they comply fully with the Brazilian national safety standard NR 12, which is based on these regulations. Our major strength is special machine construction and press automation. We offer custom-built hydraulic presses at surprisingly competitive prices. For the hydraulic components of our presses, we primarily use parts from leading European manufacturers.