Mobilni Dvižni Okvir 5000 Kg nakup rabljenega (72.451)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Fgodju Tha Iepfx Acdjf Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Fodpou Thh Eefx Acdjgf Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, številka stroja/vozila: NOH336-41, ABUS ELV stropni mostni žerjav, proga za žerjav, mostni žerjav, dvoranski žerjav Nosilnost / dvižna kapaciteta 5t - 5000 kg Tirna širina 12.990 mm, zunanja mera cca 13.250 mm Fjdpfxex Azrdo Acdegf Leto izdelave 2005 z radijskim upravljanjem Dvižna višina 6 m Gradbena višina od zgornjega roba žerjava do kljuke cca 850 mm Dolžina glave z odbijačem cca 260 cm Žerjav je demontiran in takoj na voljo Zelo dobro stanje, na voljo je pregledna knjiga Na voljo so tudi stebrni in stenski vrtljivi žerjavi Sistemi Demag KBK in Abus HB ter Errikla, Hadef, Stahl KT 2000 ipd. Možna pošiljka s špedicijo, prosimo za vprašanje glede poštne številke Osebni prevzem ima prednost

Stanje: potreben popravila (rabljeno), Leto izdelave: 2008, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 6034, potovalna razdalja osi X: 7.200 mm, pomik osi Y: 450 mm, pomik po osi Z: 590 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 25 m/min, hitri pomik na osi Z: 25 m/min, nazivna (navidezna) moč: 45 kVA, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: Bahnsteuerung iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 12.500 mm, skupna širina: 4.810 mm, skupna masa: 14.000 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 12.000 obr/min, obratovalni tlak: 7 letvica, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN contouring control iTNC 530 • 4 axes • Travel paths X / Y / Z axes: 7200 / 450 / 590 mm • Working area X / Y / Z axes: 7000 / 400 / 350 mm • Weight: 14 t Equipment - Robust base structure as a welded frame construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X-axis (50 m/min) by rack-and-pinion drive - Y/Z axes (25 m/min) by ball screw drive - B-axis 9,000°/min - Swiveling operator panel - Automatic central lubrication - Traveling tool changer for 12 tool holders SK 40 - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner Fsdjyzxfnopfx Acdogf - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 – 25 – 25 m/min - Infinitely variable feed: 0 – 5,000 mm/min - Tool change: disc changer with 12 tool stations SK 40 - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 liters - Spindle speed: 100 – 12,000 rpm - Speed correction: 80 – 120% - Drilling capacity in St 60 / Al: up to 28 mm Ø - Thread cutting capacity in St 60 / Al: up to M24 - Position measuring system: rotary encoder/length measuring system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel paths X / Y / Z axes: 7,200 / 450 / 590 mm - Working area X / Y / Z axes: 7,000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB (A)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Fgsdpfx Aeu Hl R Tocdsf Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, NIMO-KG SK 800 MK | Column Lifter / Lifting and Tipping Device for Buggies and E-Pallets Fsdpezagtijfx Acdjgf Manufacturer: NIMO-KG TRANSPORTSYSTEM Model / Type: SK 800 MK Serial Number: 9168 Overall Dimensions: 1700 x 4000 x 1300 mm The professional NIMO-KG SK 800 MK column lifter is an advanced industrial lifting and tipping device, engineered by the renowned Swedish manufacturer of material handling systems. This machine is designed for the safe, automated lifting and emptying (tipping) of standard 200-litre meat buggies, e-pallets, and heavy meat processing containers. It is essential in medium and large meat processing plants, delicatessen factories, vegetable processing facilities, as well as in the ready meal production sector, where precise dosing of raw materials into loading hoppers of other machines (such as grinders, cutters, mixers or packaging lines) is required. The operating mechanism is based on the stable guidance of the fork carriage along a robust vertical column, ensuring smooth movement and maximum workplace safety even under full load. With its impressive construction height of 4000 mm, the lifter enables operation of high technological lines and eliminates heavy manual handling, significantly accelerating internal logistics processes.

Leto izdelave: 1984, stanje: pripravljen za uporabo (rabljen), Durchgang zwischen den Ständern: 4300mm, Schnittlänge: 4050mm, Messerlänge: 4200mm, Schnittwinkel einstellbar: 1,5-2,5°, kl./gr. Streifenbreite mit Anschlag vorn: 40mm, kl./gr. Streifenbreite mit Anschlag hinten: 1000mm, Tischhöhe über Boden: 850mm, Tischlänge: 4200mm, Tischbreite: 650mm, mit 3 Verlängerungsarmen à 500mm, Innenentfernung zwischen Schnittmesser und Niederhalter plus 10mm: 35mm, Messer Untermesser: 1 Stück, Länge: 4200mm, Dicke: 35mm, Unterteilung: 2-teilig, Anzahl der Schneidkanten: 2, Messer Obermesser: 1 Stück, Länge: 4200mm, Dicke: 35mm, Unterteilung: 2-teilig, Anzahl der Schneidkanten: 2, Führungslineale für rechtwinklige Schnitte: 1 Stück, Zubehör/Sondereinrichtungen: Anschlagverstellung, Tischverlängerung, Blechrutsche, Seitenanschlag 1000mm, Schnittlängenbeleuchtung, mit Dokumentation. Eine Besichtigung vor Ort ist möglich. Fgjdpfsy U Nqbox Acdjf

Stanje: dober (rabljeno), Leto izdelave: 2019, Mössner Rekord SSF 801 tračna žaga Najzmogljivejša tračna žaga Mössner – uporablja se povsod tam, kjer so zahtevane najvišje zmogljivosti. Absolutna zastavonoša med navpičnimi visoko zmogljivimi tračnimi žagami. Ta stroj zagotavlja maksimalno natančnost, izjemno miren tek in brezkompromisno dolgo življenjsko dobo pri neprekinjeni industrijski uporabi. Osnovna oprema tračne žage: - Nosilec tračne žage iz stabilne sive litine - Hitrosti rezanja nastavljive preko frekvenčnega pretvornika in trifaznega motorja s potenciometrom - 2-stopenjski menjalnik ali brezstopenjsko nastavljive hitrosti rezanja s prirobnico in frekvenčnim pretvornikom - Ročni napenjalni mehanizem z hidravličnim prikazom - Nagibna delovna miza – desno do 30°, levo do 15° - Izmenljiva aluminijasta kolesa z oblogo iz trde gume - Zgornje kolo nastavljivo - Varnostno stikalo na vratih kolutov - Barva: RAL 7035 svetlo siva, vrata RAL 5005 signalno modra Tehnični podatki: Proizvajalec: Mössner (August Mössner GmbH + Co. KG) Model: Rekord SSF 801 Premer koles: 800 mm Najv. širina reza (izteg): 785 mm Najv. višina reza: 670 mm (opcijsko razširljivo do 800 mm) Velikost mize: 960 × 1000 mm Najv. obremenitev mize: 750 kg Moč motorja: 11 kW Hitrost rezanja z menjalnikom: 26 – 180 m/min in 290 – 2000 m/min Hitrost rezanja s prirobnico: 500 – 2000 m/min Teža stroja pribl.: 2.300 kg Dimenzije (D x Š x V): 2240 x 1080 x 2900 mm Leto izdelave: 2019 Nova cena: 54.000,- € Fodpfszc Uvwex Acdsgf "Vse iz ene roke: z veseljem vam ponudimo tudi ustrezno bančno financiranje za vaš projekt." komplett-konzept.leasingo.de Oglejte si še ostale izdelke – nove in rabljene – v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Leto izdelave: 2015, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, SURFACE GANTRIES AND AUTOMATED INSERTING UNIT FOR METAL SHEET INLAYS This system is part of a larger production line; please also refer to our other listings for more information. The offered system includes 3 provisioning stations for cover layers, an automated adhesive application machine for sandwich bonding, a lay-up conveyor for the manual assembly of the inlay/ribbing, surface gantries for the handling of cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm Fgedpsyt Nm Sefx Acdef MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING PORTAL FOR CONTOUR & SURFACE APPLICATION (of cover layers & inlays): Number of needle valves for surfaces: 104 Number of needle valves for contour: 1 Adhesive system: 1C-PUR Number of nozzles for water spray unit: 8 ANCILLARY UNITS: Climatic chamber (storage for 1C-PUR adhesive) Vacuum pump for surface gantries Punching unit

Leto izdelave: 2021, obratovalne ure: 60 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: X620DM-WL, We are selling a high-quality industrial videoscope. As plant engineers, we used this device to inspect weld seams inside pipelines. It delivers excellent image quality and is very easy to operate. Unfortunately, the probe length of 2 metres is no longer sufficient for our applications, so we need to sell it and purchase a model with a longer probe. The unit is only 3 years old. Original order confirmation details: Portable video endoscope, VTec X series - Forward or side view, white light - State-of-the-art CMOS camera technology - Bright, high-resolution 5.5" handset display Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Fsdpfxju Ul A Ns Acdsgf Field of view: 100° / 90° Illumination: White light, front LED, 3.22 lm; white light, side LED, 6.45 lm Camera resolution: Front 1280 x 960 px; Side 1280 x 960 px Monitor resolution: 1920 x 1080 px Articulation: ≤ 150° ±10 Articulation control: 4-way motorised joystick Power supply: Four 18650 Li-Ion batteries with protection circuit or mains adapter Operating conditions, protection class, weight: Hand unit: -10°C to +50°C, IP54, 1.50 kg Probe: -20°C to +70°C, IP67 Scope of delivery: - VTec X620DM-WL video endoscope - SD-USB memory card reader - HDMI cable - Mini USB data cable incl. USB power adapter - Battery charger incl. power adapter - Power adapter - Four 18650 Li-Ion batteries with protection circuit - User manual - Carrying case Rigid over-sheath with hand grip for 6 mm videoscopes Working length of sheath: 350 mm Including 1/4" tripod thread mount

Leto izdelave: 1976, stanje: rabljeno, številka stroja/vozila: WR2, Demag Overhead Crane – Kranhimmel Crane Runway – Indoor Bridge Crane Lifting Capacity: 5t / 5000kg, Span: 13,900 mm External dimension with end carriage approx. 14,000 mm Wire Rope Hoist P-Zug P412 M11 – 4-fall with micro-lifting Year of manufacture: 1976, with pendant control Construction height (top edge of crane to hook): approx. 1,000 mm End carriage length with buffer: approx. 3,000 mm Hoist lifting height: 5,500 mm Fgjdpfjrnmzzex Acdof Weight: approx. 3,200 kg Control system overhauled, new contactors etc. installed, cable drag chain added Crane is dismantled and immediately available from location 79664 Wehr. Inspection logbook included. In good used condition Column slewing cranes and wall slewing cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight carrier possible – please inquire with postal code Collection preferred

Stanje: dober (rabljeno), Leto izdelave: 1973, številka stroja/vozila: 73040, Embossing Press Baier GEBA 1/F, installation height 90 mm, pressing force 800 kg, working area 10 cm x 14 cm, year of manufacture 1973, machine number 73040, in good condition, immediately available. If interested, we are also happy to provide information about other machines available at our facility. Fgedevt Rpqepfx Acdef You are warmly invited to inspect the machine at our premises by appointment.

Stanje: skoraj kot novo (rabljeno), Staff Ice System BTX150 stroj za izdelavo ledenih kock / ledomat 150 kg/24h letnik 2022 Tehnični podatki Gelato BTX150 A Staff Ice System stroj za izdelavo in shranjevanje sladoleda. Izdelava in shranjevanje sladoleda. Samodejna ekstrakcija. Mešalo z vzdržljivimi polietilenskimi lamelami. Dvojni pokrov omogoča dodajanje sestavin med procesom. Navpični rezervoar za popoln nadzor nad procesom predelave. 50 prilagodljivih delovnih programov. Tehnične značilnosti: Največja količina izdelane sladoleda na cikel 2 litra. Proizvodnja sladoleda 15 l/h. Dimenzije 43,5 x 59,2 x 59,5 cm. Fgjdpeyzc Rujfx Acdjf

Stanje: novo, Leto izdelave: 2026, Enostavno vzdrževalna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predsobo s prizmatičnim ločevalnikom, v osnovi sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 2.16.B250 za 30.000 m³/h (na voljo tudi druge velikosti) Sestavljen iz stabilnega, vakuumsko neprepustnega 3 mm jeklenega ohišja, razdeljenega na surovi plinski prostor s filtrskimi kartušami, filtrsko predsobo s prizmatičnim ločevalnikom in čistim plinskim prostorom s čiščenjem filtra z uporabo stisnjenega zraka, vsak z ločenimi servisnimi vrati Easy Open. Lijak za zbiranje prahu z režnim ventilom ali zvezdastim dozatorjem za odstranjevanje prahu z Big Bag vrečami. Fjdew Ivqmepfx Acdsgf Krmiljenje magnetnega ventila z indikatorjem diferenčnega tlaka za optimalno nastavitev čiščenja filtrov. Servisna vrata kot nihajna vrata – enostavno vzdrževanje.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. Fgjdpfx Acou Ey Dljdjf For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2026, Shot blasting booth components: flat conveyor floor, cross screw conveyor, bucket elevator, air separator, screen, abrasive bunker, blasting machine, filter unit, fan, air ducts, lamella extraction wall, blast feed box, electrical control system supplied as a kit without installation. Alternatively, the system components can also be installed on your premises by our professional technicians. Fsdpfxohc T Nle Acdegf

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, For sale is a copy milling machine by Franz Kuhlmann KG, model series GM ½. The machine is fully functional and ready for immediate use. Technical data: - X-axis (longitudinal travel): 330 mm - Y-axis (cross travel): 200 mm - Z-axis (vertical travel): 280 mm - Template table: 500 x 400 mm - Spindle speeds: 4,200 – 20,000 rpm - Spindle chuck: Collet up to 8 mm possible - Motor power: 0.5 kW - Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H) - Weight: 430 kg Fgedpfowal Dhex Acdsf Transport and loading can be arranged throughout Europe upon request and for an additional fee. Prices are subject to VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you! Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Steady rest (28388) Center height: 360 mm Weight: 37 kg Fodpfxjmkfd So Acdogf Dimensions: see drawing

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 150.050 h, Funkcionalnost: popolnoma funkcionalen, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC530, premer vrtljive mize: 500 mm, skupna masa: 13.000 kg, največja hitrost vretena: 14.000 obr/min, delovne ure vretena: 6.950 h, dovod hladilne tekočine: 20 letvica, nos vretena: HSK 63, število mest v zalogovniku orodij: 60, Oprema: ločilnik oljne meglice, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, • Stanje: vrhunsko stanje • Delovne ure: 6.950 Fodpfjx Hg Ibjx Acdegf • KESSLER-rotacijska miza, Ø 500 mm • Zaloga orodij: 60 postaj, HSK-A63 • Notranje dovajanje hladilne tekočine: 20 barov, s tračnim filtrirnim sistemom • Hladilni sistem: samodejni nadzor nivoja hladilne tekočine • Zrak skozi vreteno • Merjenje orodij: BLUM laserski merilni sistem za orodja • Merjenje obdelovanca: infrardeče tipanje obdelovanca (3D tipalni sistem), vključno s pripravo za merjenje obdelovanca • Nadzor trkov: POS DCM modul • Dovod medijev: 3-kanalni dovod medijev v sredini mize • Opazovanje: rotacijsko opazovalno okno • Ročno kolo Prosimo, pošljite nam neposredno povpraševanje na naši spletni strani, če vas zanima stroj. Iz tehničnih razlogov je neposredno povpraševanje za ponudbo prek zunanje platforme težavno in možno le z zamudo.

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible Fjdpfsnh R Ekex Acdjgf • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta aktuacije: električni, Premer cevi (maks.): 35 mm, Debelina stene cevi (maks.): 2 mm, Kot upogiba (maks.): 360 °, radij upogibanja (maks.): 150 mm, minimalni polmer upogibanja: 32 mm, skupna masa: 28 kg, trajanje garancije: 12 meseci, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. Fsdpfxenfvx Nj Acdogf With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. Fgodpfx Acendk N Asdef POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, številka stroja/vozila: 1018, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, Premer cevi (maks.): 50 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, trajanje garancije: 24 meseci, Oprema: CE označba, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: Fsdjnfvy Uopfx Acdogf • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: Fgjdpfxjng Amkj Acdjf • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases • Large pipe and profile bends • General metal construction TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: Fgedpfxjng A R So Acdof • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance