Homag Pločevinasta Žaga nakup rabljenega (4.205)

Stanje: rabljeno, številka stroja/vozila: 007906, Pozicija 2: Enostranski robni lepilni stroj HOMAG-PROFI KFL 350/10/A3/WZ Dodpswucm Asfx Apljcg Pozicija 3: Povratni sistem za plošče HOMAG-PROFI KFL 350/10/A3/WZ

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, dolžina rezanja (maks.): 3.800 mm, Panel saw from 1996. The HOMAG HPL 11/38/22 offers a cutting length and width of 3800 mm and has a lift table with a payload capacity of 7 tons. The machine is equipped with 7 clamps and an automatic height control for efficient panel feeding. If you are looking for high-quality panel cutting solutions, consider the HOMAG HPL 11/38/22 we have for sale. Contact us for further details. • Cutting width (program pusher travel): 3800 mm • Clamps: 7 units (with 2 optional additional clamps available at positions 150/350) • Clamp spacing: 50 / 250 / 450 / 850 / 1550 / 2250 / 3050 mm (measured from the fence to the center of the clamp) • Air cushion tables (at the front of the machine): • 1x at the fence: 2810 x 650 mm • 2x: 2160 x 650 mm Additional equipment Dcsdpfx Apoy Hr Nkeljg • Lift table for stacked panel feeding: • Dimensions: 3800 x 2200 mm • Payload: 7 tons • Stack height (floor level): max. 680 mm • Stack height (pit installation): max. 880 mm • Automatic height control via control panel • Heavy-duty roller conveyors (2x): Type HER 38/22 L, non-driven, longitudinal transport, forklift slots, 18 rollers, height 330 mm, roller diameter 108 mm, spacing 198.5 mm • Roller conveyor drive units (2x): Type 38/22, speed 12 m/min • Stacking station: LIFT-EX Type HAZ, Version A, for stacking split formats • Label printing system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Edgebanding machine from 2016. The HOMAG KAL 370 features a continuously adjustable feed rate of 18-20 m/min and is suitable for workpiece thicknesses from 8 to 60 mm. It is equipped with advanced gluing and milling units as well as a comprehensive software package for efficient operation. If you are looking for a high-quality edgebander, the HOMAG KAL 370, which we offer for sale, is a strong choice. Contact us for further details. • Feed speed: Infinitely variable 18-20 m/min • Fixed guide side: Left • Workpiece thickness: 8-60 mm • Workpiece overhang: 30 mm • Through-feed preparation: Pre-installed for Boomerang TFU140 • Feed lock: Available • Equipment packages: Future Package 5; Foil/high-gloss package (bottom) • Infeed features: Sliding carriage; Workpiece alignment at infeed; Workpiece support with roller conveyor; Infeed lock • Workpiece transport: Transport unit; Top pressure • Cleaning/preparation: Separating agent spray unit (top/bottom) • Jointing/milling: Joint trimming unit; I-System DIA joint trimming set WD60; Workpiece preheating (up to 60 mm thickness) • Gluing: Gluing unit; Preparation for Airtec activation unit; Adhesive application system; Application units QA60 and PU60; Pressure vessel for PU application unit • Magazine/pressure: Edging magazine; Pressure zone • Spraying: Lubricant spraying system (top, bottom, side) • Trimming/milling: Trimming unit HL81 (angled/straight, 0.8 kW); Pneumatic adjustment for flush/overhang trimming; Pre-milling unit BF10; HM milling cutter set (straight); Profile milling unit FK11 • Tool loading/change: I quick-change head system (automatic adjustment/FK); I-DIA radius milling cutter set (for FK, R=2 mm, Z=4); Standard milling unit SF21; Multiprofile scraper MN21 (automatic); Profile knife set for MN20/21 • Additional units: Joint pull-off blade FA20 BASIC; Automatic scanning for joint FA20; Buffing unit FA06 (top/bottom); Powercontrol PC23 Powertouch • Control/software: WoodCommander software package; Antenna cycle control; Machine data collection and analysis; Error diagnostics; Teleservicenet-soft • System/networking: Emergency-stop interlock; Network connection (Ethernet); Hand control for setup mode; Language: German • Documentation: On data carrier and paper Additional equipment • Boomerang return system TFU140/20/08-Optimat • Workpiece identification (sensor-assisted) • Basic outfeed return Dcedpfx Apoy Hrtpjljg • CE for cells (systems)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, število osi: 4, This 4-axis HOMAG BAZ 211/40K was manufactured in 2010. It features a vacuum clamping system with multiple configurations, a high-performance vacuum pump, and a Flex5+ saw, routing, and drilling unit. The machine is equipped with three tool changers and an edge banding package for advanced processing capabilities. If you are looking for a high-quality CNC woodworking machine, you should consider the HOMAG BAZ 211/40K that we have for sale. Contact us for more details. • Vacuum Clamping System: 8x 120x50 mm (0/90°) K-table • Rotatable Vacuum Clamping System: 8x 125x75 mm (360°) K-table • Vacuum Pump: Reinforced, 100/140 m³/h • Unit: Flex5+ saw, routing, and drilling unit for tool changers (WZW) • Tool Changer: 3x tool holder for Flex5+ (WZW) • Edge Banding Package: Power EDGE 360° for BAZ 211/311 Venture Dcedey Hrr Eepfx Aplsg • Edge Processing: Workpiece edge blow-off nozzle • Routing/Scraping: Combined flush-trimming and scraper unit (WD 60 mm) • Profile Knives: 2x for scraper • Radius Milling Cutter Head: 2x WPL radius cutter head • Material Handling: Tool transfer station for B200/300/K • Software: Upgraded to woodWOP 6.0

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, širina obdelovanca (maks.): 60 mm, največja dolžina izdelka: 7.845 mm, Edge banding machine from 2012. The HOMAG KAL211 Edition 2264 offers a working height of 950 mm and is suitable for workpiece thicknesses from 8 mm to 60 mm. It is equipped with various units such as a gluing unit, joint trimming unit, and preliminary milling unit, enhancing its versatility. If you are looking for a high-quality edge banding machine, consider the HOMAG KAL211 Edition 2264, which we have for sale. Please contact us for further details on this machine. • Feed speed: 18–25 m/min • Feed speed (max with FK11 unit): 20 m/min • Working height: 950 mm • Pneumatic connection: 6 bar • Total length: 7,845 mm • Minimum workpiece width: • 60 mm for 12–22 mm thickness • 105 mm for 23–40 mm thickness • Workpiece thickness: 8–60 mm (extended with options) • Edge material thickness: • Rolls: 0.3–3 mm • Strips: 0.4–20 mm • Electrical specifications: • Supply voltage: 400 V / 3 Ph / 50 Hz • Total connected load: 67 A • Control voltage: 24 V • Control system: powerControl PC22 (Windows XP based) • Software: woodCommander; woodScout (option); Schuler MDE Basic • Equipment/Units: • Separator spray device (top/bottom) • Joint trimming unit (2 motors, each 4 kW) Dcjdpfxsy Hi Eio Apljg • Gluing unit A20 with 2 rollers (Quickmelt system) • Application unit PU65 (interchangeable, Teflon-coated) • Preparation for laserTec activation unit • End trimming unit HL84 (0.8 kW) • Preliminary milling unit BF10 (1.5 kW) • Multi-profile forming unit FK11 (manual adjustment) • Profile scraper PN10 • Finish unit (glue joint scraper + buffing unit) • Cleaning agent spray device Additional equipment • Automation package (No. 4013): • Automatic adjustment of infeed fence and pressure zone • Electronic height adjustment for the upper pressure beam

Stanje: rabljeno, številka stroja/vozila: 007516, Maximum working width: 2400 mm Dodpfewuz D Tex Aplocg

Stanje: rabljeno, Leto izdelave: 1999, skupna višina: 3.000 mm, skupna dolžina: 6.400 mm, skupna širina: 4.300 mm, No. 3269 CNC Machining Center HOMAG BAZ 41/30K Used, Year of manufacture: 1999 Working dimensions: X 3000 mm / Y 1300 mm / Z 250 mm Edgebanding unit Drilling and milling unit with 4 spindles Flush milling unit Sanding unit Interchangeable air nozzle Adjustable milling and drilling unit Underfloor milling unit 12-position rotary tool changer WoodWOP 5.0 control system Dcjdpfxsy Dtp Hs Aplsg Overall dimensions with safety fence approx. 6400 x 4300 x 3000 mm (LxWxH) Sale on behalf of a customer, ex location near 71063 Sindelfingen, without disassembly, transport, or installation Disassembly, loading, and transport by us optional on request Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; sold as seen Photos and videos are for reference only and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery conditions: ex location

Stanje: rabljeno, številka stroja/vozila: 008403, Maks. višina obdelave: 160 mm Maks. obdelovalna širina: 250 mm Maks. hitrost pomika: 24 m/min Dcsdpjykivhofx Apleg Število delovnih vreten: 5

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 3.000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 vacuum cups, side and longitudinal positioning pins, LED position display for vacuum cups Venture 316 Future Package 10 lift rails, connection for Power-Clamp, vacuum connection for templates Dcedpfx Aoy E Npfspljg WORKPIECE PARAMETERS: – Maximum workpiece lengths: All units, single: 3300 mm; pendulum max.: 1740 mm Tool diameter 25 mm: single 3475 mm; pendulum max.: 1915 mm – Workpiece width: Front stop: 950 mm, all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping fixtures – Up to 60 mm with standard clamps SAFETY AND PROTECTION FEATURES: EC-compliant; SAFETY FENCE ON RIGHT WITH DOOR Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer, side-mounted Drilling head with 16 spindles (vertical 12 / horizontal 4 / none at 90°) AGGREGATE INTERFACE DRIVE5C+ TOOL MEASURING PROBE CHANGER SOFTWARE FOR POSITION MEASUREMENT AND ROTATION OF CNC COORDINATES TOOL TRANSFER STATION COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 300/360 m3/h Powerclamp pneumatic package Control: POWERCONTROL PC85 with POWERTouch control system; IPC PowerPack, Operator pedestal for program start; camera system with tablet PC WOODWOP CAD/CAM INTERFACE STANDARD Documentation and control texts: German Delivery includes only the pictured tools and HSK holders!

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, CNC MACHINING CENTER WITH EDGE BANDING UNIT AND ASSOCIATED POST-PROCESSING UNITS. Technical specifications: Working dimensions: + X-axis: 3,050 mm in single occupancy + X-axis: 900 mm in pendulum operation + Y-axis: Milling up to 1,220 mm with tool diameter 25 mm Edge banding up to 1,220 mm All units up to 1,170 mm Workpiece thickness up to 60 mm with standard clamps 6 workpiece consoles for hose-free vacuum system 4 workpiece stops in X-direction, integrated into the machine carrier, for large workpieces 6 workpiece stops in X-direction, one per console One workpiece stop each left & right in Y-direction 4 lifting rails for easy positioning of heavy workpieces LED setup assistance for easy positioning of vacuum cups and consoles Equipment: Djdey Hrh Tepfx Aplocg Milling spindle 11 kW, HSK F63 Speed 0 - 18,000 rpm Liquid cooling C-axis for use of processing units, with torque transmission and 3-point support 12-position tool change magazine Drilling head with 17 vertical spindles Spindle spacing 32 mm Air blow nozzle to clean workpiece edges Interchangeable edgebanding unit for 360° edgebanding from butt joints. With single-roll magazine With granulate feed Edge thickness up to 3 mm Adapter units: + Horizontal drilling head, cross-head design + Lock case milling unit, 2 outlets + Saw unit 90 degrees + Swiveling drilling/sawing unit + Combination radius milling / scraper unit Control: POWERCONTROL with: WOOD WOP AV license WOODWOP

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 0-200-21-3286, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 56 A, vrsta vhodnega toka: trifazni, največja debelina roba: 20 mm, Oprema: CE označba, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edgebanding, and post-processing of various edge materials. Fixed fence on the right. NOTICE: Fully functional machine SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as the workpiece feed system, - Max. workpiece thickness: 60 mm - Motorized height-adjustable top pressure - Workpiece support with rollers, moveable on rails - Glue pot lift-off when feed is stopped - Glue roller clamping before workpiece trailing edge - (Remote) manual control for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming (climb & conventional), 2 x 3.5 kW, operation-controlled EDGEBANDING UNIT A20, consisting of: Dcedpfxey H Hzbs Apleg - QA34 glue application unit - EVA glue premelter - Edge magazine for edge thickness from min. 0.4 mm up to max. 20 mm - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven, 6 non-driven pressure rollers POST-PROCESSING SECTION: - End trimming unit HL81, 2 motors (front/rear edge) with motorized fine adjustment of end stops - Pre-/flush trimming unit 1.5 kW, top/bottom - Profile trimming unit FK13 (corner rounding), 2 motors (top/bottom) with automatic 8-position tool changer with several interchangeable heads - Profile scraper MN11, top/bottom, with automatic revolver positioning - Flat scraper FA10, top/bottom (version with 3 sensing rollers) - Belt sanding unit KS10, straight edges, with oscillation - Buffing unit top/bottom CONTROL: HOMATIC NC 21

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Prodajam vertikalni pretočni CNC rezkalno in vrtalni stroj HOMAG Weeke Drillteq V-200 (prej BHX 055), letnik 2023. Konfiguracija: 1 kos rezkalna enota z avtomatsko menjavo orodja, 4 pozicije HSK63 13 + 4 + 2 kosov vrtalnih vreten Dedpfx Apsy Hfp Relecg 1 kos utorska žaga S povratno funkcijo, ki vrača elemente nazaj k operaterju ali zadaj kot pretočni stroj. Stanje kot novo. S popolno dokumentacijo in CE. Takoj na voljo.

Stanje: rabljeno, Leto izdelave: 2007, skupna višina: 1.200 mm, skupna dolžina: 3.600 mm, skupna širina: 1.480 mm, Colour: Grey - Machine available from: 2025-12-15 - Year of manufacture: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units: 8 - └ 1st unit type: Pre-milling unit - - Tools included: Yes - └ 2nd unit type: Glue station - └ 3rd unit type: Pressure rollers - - Tools included: Yes - └ 4th unit type: End trimming unit - - Tools included: Yes - └ 5th unit type: Rough trimming unit - - Tools included: Yes - └ 6th unit type: Radius scraper unit - - Tools included: Yes - └ 7th unit type: Flat scraper unit - - Tools included: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Power consumption [A]: 50 Dcjdpox Ei Syefx Apleg - Transport dimensions: 3600 mm x 1480 mm x 1200 mm (L x W x H) - Number of transport packages: 4 Financial Information VAT: The stated price is net of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2008, skupna višina: 1.800 mm, skupna dolžina: 10.000 mm, skupna širina: 2.200 mm, Weight: 5,500 kg - Year of manufacture: 2008 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units: 8 - 1st unit type: Pre-milling unit - 2nd unit type: Glue application unit - 3rd unit type: End trimming unit - 4th unit type: Rough trimming unit - 5th unit type: Rough trimming unit - 6th unit type: Radius scraping unit - 7th unit type: Flat scraping unit - 8th unit type: Brushing unit - Voltage [V]: 400 - Power consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 10,000 mm x 2,200 mm x 1,800 mm (L x W x H) - Transport weight [kg]: 5,500 kg - Number of transport packages: 3 Financial information: VAT: The indicated price is exclusive of VAT. VAT/margin scheme: VAT deductible for businesses. Delivery and trade-in possible at any time for all items from the industrial sector. Djdpfx Apjychw Ijljcg Yorick Diebels

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, dokumentacija / priročnik, dvostranski, Additional equipment: Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Djdpfx Apoxwui Esljcg Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Minimum workpiece gap: 500 mm

Stanje: dober (rabljeno), Leto izdelave: 1996, za največjo velikost plošče: 320 cm dolžine in 220 cm širine ali globine Dsdpfx Ajy Nfdyoplecg nedemontirano, na lokaciji Bad Berleburg

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Ta industrijska proizvodna linija HOMAG WEEKE je bila izdelana leta 2007. Ima celovito postavitev za obsežno obdelavo plošč in lepljenje robov, vključno z avtomatskimi nakladalnimi sistemi, centralnim valjčnim transporterjem, več moduli za lepljenje robov ter portalnim manipulatorjem za zlaganje. Idealna za optimizirano lesno proizvodnjo, zagotavlja učinkovito rokovanje in natančnost. Razmislite o priložnosti za nakup te industrijske linije HOMAG WEEKE. Kontaktirajte nas za več informacij o tem stroju. Vrste uporabe Kompletna proizvodnja Dedpjx D Dq Sjfx Aplscg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Podvozje za robne lepilke Bil je nameščen na Homag Edgeteq S-200, KDF 1130 FC (1100 kg). Zagotovo pa ustreza tudi drugim strojem, npr. Brandt (morda bodo potrebne manjše prilagoditve) Dcjdjw S Dmdspfx Apleg Dolžina U-profilov pribl. 1130 mm Vgradna višina z valji pribl. 150 mm 4 robustna kovinska vrtljiva kolesa z mazalko 2 zavore 2 podložni plošči za uravnavo višine Stroj je možno po dogovoru prikazati na naši lokaciji. Ponujamo samo stroje, ki so pripravljeni za prikaz v naši skladišču; glejte še "druge ponudbe tega ponudnika".

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, CNC obdelovalni center HOMAG BOF 311 Na voljo avgusta 2026 - Letnik 2008 (letni servis s strani HOMAG) - Leta 2024 obnovljeno glavno vreteno Dcjdpfoy I Dtqjx Aplog - Programska oprema WoodWop - AP-miza (avtomatska miza) - Dimenzije mize: 6000 x 1525 mm (10 konzol) - 18,5 kW glavno vreteno / C-os + Flex-5 vmesnik - Obdelava v Y pri prednjih omejevalih 1525 mm - Obdelava v Y pri zadnjih omejevalih 1850 mm - Vrtalna glava - Menjalnik orodij v verigi 30 pozicij - Orodno agregat za utore v X (zasuk 0-90°) - Brez orodij / agregatov / transportnega traku za ostružke - Vakuumska črpalka Za dodatna vprašanja nas kontaktirajte. Dodatne fotografije/video na zahtevo. Ogled v proizvodnji je možen, z veseljem ga organiziramo za vas.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1985, Used folding machine line consisting of: lift table with pusher, roller conveyor, infeed unit, transfer system and workpiece pre-cleaning, double-end profiler Brand: Homag Type: FG63 Year of manufacture: 1985 Technical data: - With adhesive tape applicator - Machine for profiling and folding of edge strips - Double-sided milling station - Control system: Siemens Simatic Touch - Glue application unit - Folding unit for folding pre-creased workpieces - Sliding shoe for pressing - Outfeed table for material removal Electric scissor lift table Brand: Altek Year of manufacture: 2014 Technical data: - Max. load capacity: 1000 kg Dodpfxoy Drire Aplecg - With integrated roller conveyor - Dimensions: approx. 3100 x 1000 mm - With height sensor for automatic stack height detection and cycle control Tilting skip Brand: Bauer Type: WU-R 1500 Year of manufacture: 1995 Technical data: - Capacity: 1.5 m³ Crosscut and mitre saw Brand: Bosch Year of manufacture: 2016 Industrial vacuum cleaner Brand: Nilfisk Type: Attik 751-11 3 panel transport trolleys Brand: Fetra Sheet rack Brand: Robering Type: Dexion D90 Plus Year of manufacture: 2018 Technical data: - Consists of 5 beams - Beam height approx. 4000 mm - Max. permissible shelf load: 3000 kg - Total of 16 crossbeams, length 2700 mm - Single-sided pallet truck - Width approx. 1800 mm - Loading depth: between 800 and 1000 mm - Approx. 9 units Aluminium folding ladder Cross slide - Total length approx. 3000 mm - Roller width approx. 800 mm Note: The technical data and descriptions are copies from the original order confirmation. The information is provided for informational purposes only and is not binding.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, število osi: 3, Ta 3-osna HOMAG WEEKE OPTIMAT ABD150 je bila izdelana leta 2014. Gre za rabljeni večvretenski vrtalni stroj, zasnovan za natančno vrtanje in vstavljanje moznikov. Če iščete kakovosten vrtalni stroj, razmislite o modelu HOMAG WEEKE OPTIMAT ABD150, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. • Rabljeni vrtalni in vstavljalni stroj za moznike Dedpoy Dgpasfx Aplocg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Stroj za lepljenje robov, izdelan leta 2010. Ta HOMAG KAL 210 Ambition 2264 je rabljeni enostranski stroj za lepljenje robov. Če iščete kakovosten stroj za lepljenje robov, priporočamo HOMAG KAL 210 Ambition 2264, ki je na voljo za prodajo. Za več podrobnosti nas kontaktirajte. Dsdpfx Aey Dgm Soplocg • Rabljeni enostranski stroj za lepljenje robov

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ferwood koda: RS0003616 - Koda proizvajalca: 2-083-02-7120 - Stanje: Kot novo (razstavni artikel) - Funkcionalnost: Popolnoma delujoče - Združljiv stroj: - Teža: 2,5KG - Dimenzije: 36X26X21 - Če vas zanima, nudimo servisni pregled, kontaktirajte nas. Dodpfeyz T Ttex Apljcg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, številka stroja/vozila: 0-261-96-0637, Oprema: dokumentacija / priročnik, Feeding and receiving the element • Upper pressure belt • Variable feed speed 8–18 m/min • Front air cushion table • Automatic keyway ruler • Prepared for connection to a return system Edge banding • PUR pre-melter 2.5 kg/h • Glue pot QA65, 2 pcs • Support for narrow components • Automatic edge band feeding Component finishing • Anti-adhesive and cleaning fluid • Cut-off unit • Edge milling unit with R-2 and R-1 tools • Flat scraper, top-bottom polishing unit Dodsy Eft Topfx Apljcg • Multifunctional profile scraper unit with R-2 and R-1 tools • Corner rounding unit with R-2 tool, dual-motor MF50 Documentation • Selected languages: English, German, Croatian • Format: Data carrier + paper documentation General information • Year: 2017 • Control: HOMAG POWERTOUCH group control system • CE mark: YES • Availability: Ready for pickup – April 2026 • Machine length: approx. 6075 mm

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: AGG0213 - Koda proizvajalca: 1-056-09-3351 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Združljiv stroj: - Teža: 8 kg - Dimenzije: 46x39x27 cm - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Djdpfx Aoyztt Hjplocg