HOMAG KAL 210 Ambition 2264

HOMAG KAL 210 Ambition 2264

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, FEATURES: Special equipment with nesting Max. edge thickness for gluing: 20 mm Max. gluing height: 60 mm Max. thickness of coil material: 3 mm Min. workpiece width: 60 mm Max. feed speed: 25 m/min Stepless feed speed Electric height adjustment Top belt pressure Preheating zone Granulated glue system with pre-melting container Exchangeable/variable glue pot Spraying device Jointing milling unit End trimming unit with 2 motors Flush/radial/chamfer milling stations: 1 Corner copying unit with 2 motors Edge scraper: profile and flat Polishing unit Strip magazine Synchronized units with NC axis(es) Version: left side machine Quick-change unit(s) HOMAG infeed device with 2 rollers HOMAG A 20 gluing unit HOMAG HL 84 HOMAG FK 11 HOMAG PN 10 profile scraper unit HOMAG FA 11 finishing unit Hfodpsukrthsfx Afwsf Control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm CE certified NEW CHAINS INCLUDES: PREPARATION AND LOADING FOR CUSTOMER TRANSPORT NOT INCLUDED: TRANSPORT, ASSEMBLY, COMMISSIONING

Stanje: rabljeno, številka stroja/vozila: 006849, Type of attached edge: thin edge, thick edge, solid wood Gluing system: EVA Jointing milling: yes Multifunction unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Hodpfxswd Itmj Afwsff Working units: 7 pcs

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: nepreverjeno, obratovalne ure: 29.000 h, višina obdelovanca (maks.): 40 mm, hitrost pomika os X: 25 m/min, skupna dolžina: 7.755 mm, model krmilnika: PowerControl PC22, delovna višina: 950 mm, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece projection: 30 mm Workpiece thickness: 12 - 40 mm Edge material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edge material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Hsdpfx Afsyc S Haswjff Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Scissor-type workpiece support with roller support, extendable by 1000 mm Automatic infeed fence adjustment Fixed stop on the left side Pneumatically controlled infeed lock Upper pressure by powered combination V-belt Electric height adjustment Workpiece transport system via transport chain with rubber pads Release agent spray unit (top/bottom) Joint milling unit 2 x 3 kW Gluing unit A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick-change system, 2-roller magazine, pressure zone C (automatically adjustable, with 1 pre-press roller and 6 post-press rollers) End trimming unit HL84 0.8 kW, with automatic adjustment for bevel/straight as well as pneumatic adjustment for flush/overhanging trimming Pre-milling unit 1.5 kW, pneumatic adjustment for flush/overhanging milling Contour milling unit FK11 with automatic adjustment from bevel to radius milling Profile scraper PN10 (with pneumatic retraction for lateral offset) Finishing unit (with pneumatic retraction for lateral offset), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Pressure: top belt pressure Pre-heating zone: available Hfjdpjx Tqgbsfx Afwof Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special feature: with nesting capability - new chains - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 - HOMAG FA 11 finishing unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Pressure: top belt pressure Pre-heating zone: available Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Hfjdpsxg Ix Ssfx Afwof Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special feature: with nesting capability - new chains - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 - HOMAG FA 11 finishing unit