Stroj za robne trakove

HOMAG KAL 210 AMBITION 2264

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, širina obdelovanca (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Pressure: top belt pressure Pre-heating zone: available Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special feature: with nesting capability - new chains Nwodpfx Aoxzfwbjdpjp - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 - HOMAG FA 11 finishing unit

Stanje: rabljeno, Number of spindles: 6 pcs Working width: 240 mm Planing height: 200 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Dimensions (L/W/H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window manufacturing ----- Machine is cleaned and function-tested! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd tool holder HSK ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning 3rd tool holder HSK ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) Nwsdevnv Uzopfx Adpep 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Additional technical features: ----- 2 feed units after the upper spindles for reducing the axle distance from 620 mm to 450 mm Air cushion lubrication in the worktable 2 x milling units with belt drive with quick-change HSK 85 system at positions 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning at positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning at positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) at positions (3 – 4 – 5) Mobile 10 control system PRL equipment for cutting out glazing beads on 2nd upper horizontal spindle Machine is offered without tooling (Technical specifications according to manufacturer – subject to change!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Allgemeine Daten Abmessungen Tiefe: 7845 mm Maschinengewicht: 5000 kg Zusätzliche Ausstattung HOMAG Leim- und Finish-Komponenten Diese HOMAG KAL 210 AMBITION 2264 Kantenanleimmaschine wurde 2010 hergestellt. Sie bietet eine maximale Anleimerdicke von 20 mm, eine Kantenanleimhöhe bis zu 60 mm sowie eine maximale Vorschubgeschwindigkeit von 25 m/min. Ausgestattet mit Granulat-Leimsystem, Vorheizzone und verschiedenen Bearbeitungseinheiten, darunter eine Fügefräseinheit und eine Eckenrundungseinheit. Nutzen Sie die Gelegenheit, diese HOMAG KAL 210 AMBITION 2264 Kantenanleimmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Anwendungsbereiche Kantenanleimen Nwsdpfx Adjxxndlepjp

Stanje: rabljeno, Leto izdelave: 2014, Power Control PC 22 control unit with WoodWop – POWERTOUCH software. Panel thickness: 8 - 60 mm. PVC/ABS edge thickness: 3 mm. Feed speed up to 25 m/min (20 m/min with corner rounding). Electronically adjustable working height via CNC. Motorized, rubberized belt with superior pressure. Panel support guide and assisted loading for small panels. Controlled infeed guide. Anti-adhesive unit. Pre-milling unit with two 3 kW motors, 9000 rpm, with ball bearings. Glue application unit for PUR adhesive with pre-melter and glue tank. Edge pressure unit for straight profiles with electronically adjustable pressure rollers (CNC-controlled). Trimming unit with two motors (automatic tilt adjustment?). End trimming unit with two motors. Corner rounding unit with two multifunction motors (trimming + rounding) with CNC control. Edge scraping unit. Glue scraping unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS MUST BE VERIFIED. Nwodpfx Adovqbh Ejpjp

Stanje: rabljeno, Leto izdelave: 2013, Technical data Nedpfx Adjv Szt Djpowp Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power requirement: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction capacity: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double upper pressure for workpiece stability Electronic thickness control Feed frequency inverter Automatic lubrication of the feed chain Automatic motor calibration Touchscreen control system Emulsion spraying at infeed and outfeed Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with interchangeable knives Motorised cutting depth adjustment Gluing unit Application of glue as well as hot air Heated application roller Quick-change complete unit Automatic positioning via motor 3 pressure rollers Edgebanding speed: 14 m/min End trimming unit Dual-motor unit with automatic tilting Tilting up to 15° THK prism guides Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change with servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Stanje: rabljeno, številka stroja/vozila: 006849, Type of attached edge: thin edge, thick edge, solid wood Gluing system: EVA Nwsdewd Itmspfx Adpjp Jointing milling: yes Multifunction unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 7 pcs

Stanje: rabljeno, Leto izdelave: 2005, Delovno območje: X=2970 mm / Y=1725 mm. Hitrosti pomika osi: X=60, Y=45, Z=25 m/min. Teža: 3200 kg. Lokacija skladišča: Nattheim. Nwodpfsw Dcccjx Adpsp

Stanje: rabljeno, Leto izdelave: 2010, Touchscreen control for adjusting work groups Panel thickness from 10 to 50 mm Solid wood 12 mm Nsdpfepzfcgox Adpswp PVC/ABS edging from 0.4 to 3 mm Feed speed up to 22 m/min Minimum panel length 150 mm Minimum panel width 70 mm Electronically adjustable working height by CNC Motorized rubber-coated belt with superior pressure Panel support guide Side roller conveyor with idle rollers for panel support Anti-adhesive unit Rectifier unit with two 1.5 kW motors each Roller holder plate COMBIMELT adhesive application unit for hot melt glue with automatic VarioMelt dosing and pre-melter Patented edge pressure unit with segmented pads Pre-milling unit with 2 motors Trimming unit with 2 motors Corner rounding unit Edge scraper unit Installed power 13.7 kW Machine length approx. 6170 mm TECHNICAL DETAILS MUST BE VERIFIED

Stanje: rabljeno, Leto izdelave: 2007, Workspace: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel X-Y: 2980 x 1271 mm. Z-axis travel: 200 mm. Clearance height: 180 mm. The base structure is a monolithic design made of thick-walled steel, reinforced throughout the entire machine bed by fully welded triangular plates, resulting in extreme rigidity. The triangle shape with a wide base, used for all load-bearing components, is the secret to ensuring lasting precision and stability. The machine layout provides the operator with an optimal workflow while requiring minimal space. This base structure offers the machining unit a balanced and secure foundation with outstanding load distribution. The mobile aggregate support is constructed as a solid monoblock. It travels along the X-axis on precision-ground linear guides by means of recirculating ball bearing carriages. The machining unit is mounted to the mobile support via precision-ground linear guides and ball bearing carriages as well. Description of aggregates and standard accessories: Drilling unit: Drilling head with 10 + 4 spindles · 6 individually selectable vertical spindles in X · 4 individually selectable vertical spindles in Y · 2 horizontal spindles in X (1+1) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Pitch: 32 mm · Chuck: M10 with 11 mm locating pin · Extraction port: D = 160 mm Vertical milling unit (Position 2) · Tool holder: HSK 63F · Speed: 1,500 - 24,000 rpm, variably adjustable via inverter · Motor output: 4.4 kW (6 HP) from 12,000 rpm (S1) · Clockwise / counterclockwise rotation · Ceramic bearings · Delivery includes: 4 tool holders (right), without collets Tool changer · Side-mounted tool magazine for 7 tools (TR7), fully enclosed to protect against chips · 7 tool stations for HSK 63F holders in sequence · Max. tool diameter: D = 120 mm · Max. weight per holder: 4.5 kg · Max. total tool weight: 20 kg (TR7) · Angle heads can be accommodated Horizontal milling unit (Position 1) Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 - 18,000 rpm, stepless via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (for saw blade D = 120 mm / bore 50 mm) · Motor output: 3 kW (4 HP) · Max. tool diameter, front milling: 20 mm · Max. tool length, front milling: 110 mm · Max. tool diameter, rear milling: 12 mm · Max. tool length, rear milling: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade spindle diameter (ER 20): 12 mm Worktable Nwjdpow Aifzefx Adpjp The worktable is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system ensures maximum flexibility for precise positioning and optimal holding of workpieces. · 4 supports, 900 mm, infinitely variable adjustment in X · 8 round vacuum pods D = 110 mm, infinitely adjustable in Y (2 per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total: 6) · The retractable reference stops are CNC-controlled · Supplied: 4 plug-in adapters for suction pads · Standard feature: pendulum (dual-zone) operation Axis movement The drive system in X, Y, and Z uses ground recirculating ball screws of the highest precision class. The X-axis ball screw is positioned exactly along the centerline...

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The base frame structure is a monolithic construction made from thick-walled steel. It is reinforced with welded triangular steel plates across the entire machine bed, resulting in exceptional stability. The triangle shape with a wide base used for load-bearing components is the secret to ensuring long-term precision and stability. The machine layout allows the user to achieve an optimized workflow while minimizing the required footprint. The base structure supports the machining unit with a balanced and secure foundation, offering particularly effective load distribution. The mobile gantry-style aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis on precision-ground prismatic guides via linear ball bearing carriages. On this carrier, the machining unit is also mounted on prismatic, ground guides and linear ball bearing carriages. Axis Motion: The drive system for the Y and Z axes uses precision-ground ball screws of the highest accuracy class. The X axis is driven by a backlash-free, preloaded precision rack and pinion system, ensuring balanced load distribution during positioning. This characteristic is essential to guarantee smooth motion, even in complex operations. All axis movements are performed by brushless AC servomotors. These deliver excellent positioning speeds due to their very short ramp-up times, and their measuring systems are fully integrated. These features make this type of drive completely maintenance-free. · Rapid traverse X: 40 m/min · Rapid traverse Y: 60 m/min · Rapid traverse Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control System / Control Cabinet · Office PC or Industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote control unit with essential functions Nsdpfx Asvvi Rfodpswp ELECTRICAL/ELECTRONIC CNC CONTROL The universal system is equipped with a powerful NC control. The integrated office PC brings a unique level of familiarity to the NC control: the software runs on Windows XP, allowing fast and easy programming, which can be quickly mastered even by inexperienced users. The system is open and accommodates the connection of CD-ROM drives, audio cards, barcode scanners, modem, printer, scan systems, etc. Installation of all standard network systems and all commercially available CAD programs is possible. To save space, the control cabinet is installed beneath the machine table; the operator works at a separate mobile terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I, GB, F, D, E) - Linear and circular interpolation in three axes, spatially linear, spiral in the selected plane - Supported programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to allow identical panel processing on different