Westtech Woodcracker Cs545 Compact Novo / Na Zalogi! nakup rabljenega (31.635)

Stanje: novo, Leto izdelave: 2025, KOMPLETTE ZERKLEINERUNGSANLAGE!!! Diese Linie ist bei uns auf Lager und sofort verfügbar! - Beschickungsförderband zum Zerkleinerer WT - Einwellenzerkleinerer mit hydraulischem Schieber, Modell WT3080, 30 kW, Rotorlänge 800 mm - Austragsförderband vom WT sowie Zuführung zum Messermühle PC - Messermühle PC42100R, 45 kW, Rotorlänge 1000 mm Ncodpfxjv I T Dys Agxsr - Absauggebläse mit 5,5 kW Motor - Big-Bag-Station für zwei Säcke

Stanje: novo, Leto izdelave: 2025, KOMPLETTE ZERKLEINERUNGSANLAGE!!! Ncjdpfxjv I T E Ds Agxsr - Beschickungsband zum Zerkleinerer WT - Einschneckenzerkleinerer mit hydraulischer Schubeinheit WT3080, 30 kW, Rotorlänge 800 mm - Austragsband vom WT und Aufgabe zum Schneidmühlen-Modul PC - Schneidmühle PC42100R, 45 kW, Rotorlänge 1000 mm - Absauggebläse mit 5,5 kW Motor - Big-Bag-Abfüllstation für zwei Säcke

Stanje: novo, Leto izdelave: 2025, delovna širina 1300 mm ročna nastavitev višine elementa nastavitev doziranja lepila CE oznaka varnostno stikalo napajanje 380V popolnoma novo 2025 Ncedpfxexf Ed Ae Agxor

Leto izdelave: 2022, stanje: novo, številka stroja/vozila: AN2301154,

Leto izdelave: 2022, stanje: novo, številka stroja/vozila: AN2301155, Atlas Copco Generator P3500i The mobile inverter generator Atlas Copco P3500i is a lightweight, efficient, and reliable source of portable power supply. Thanks to its high fuel efficiency and compact dimensions, this generator is highly versatile for daily use, frequent single jobs, typically powering electric tools as an inverter generator or serving as an emergency power unit. With its excellent sound insulation, the emergency generator operates very quietly, barely louder than an electric shaver. The generator features a large fuel tank, which allows for up to six hours of continuous operation before refueling is needed. Despite the large tank, it remains compact and light enough for easy transport across job sites or space-saving storage. Intelligent variable speed control, combined with the option of parallel operation, ensures efficient power supply with minimal fuel consumption, as the engine speed automatically adjusts to the current load conditions. Key features: Atlas Copco Inverter Generator P 3500 i - Recoil starter - Large fuel tank - Engine oil level monitor - Overheat protection - Sound-insulated canopy, CE-compliant noise level, quiet Ncjdpfx Aol R Hz Sjgxsr - Sockets - Electric key start (12V) - Inverter technology, stable voltage and frequency - Instrumentation: voltmeter, hour meter - Circuit breaker - Wheels - Engine alarms: low oil, overload - Intelligent speed control for fuel efficiency - Parallel operation ports (parallel kit with cables optionally available) Technical specifications: Voltage 230V / 50Hz Peak output 3.3 kVA Rated output 3.0 kVA Tank capacity (l) 10.0 Starter type Electric / recoil Weight 45.0 kg Fuel Petrol Max. sound pressure level (LPA) at 7 m 63.0 dB(A) Sound power level (LwA) 88.0 dB(A) Sockets 2x Schuko 2P+G 16A | 2x Nema 240/120V Twist Lock

Leto izdelave: 2022, stanje: novo, številka stroja/vozila: AN2301155, Atlas Copco Generator P2500i The mobile inverter generator Atlas Copco P2500i is a lightweight, efficient, and reliable source of portable power supply. Thanks to its high fuel efficiency and compact dimensions, this generator is versatile for everyday use and frequent individual jobs, typically for power tools as an inverter generator or as an emergency power backup. Nsdpel R Hy Ajfx Agxecr With its excellent sound insulation, the emergency generator operates very quietly, barely louder than an electric shaver. It is equipped with a large fuel tank, providing up to six hours of runtime before needing a refill. Despite the large tank, the generator remains compact and light enough for easy transport across construction sites or space-saving storage. Smart, variable speed control, together with the option for parallel operation, ensures efficient power supply with minimal fuel consumption, as the engine speed automatically adapts to the current load conditions. Key Product Features: Atlas Copco Inverter Generator P 2500 i - Pull starter - Large fuel tank - Low oil level monitor - Overheat protection - Sound-insulated casing, CE-compliant low noise level - Power outlets - Inverter technology: stable voltage and frequency - Motor alarm: low oil level, overload - Speed control for fuel efficiency - Connections and cables for parallel operation - Voltage: 230V / 50Hz - Peak power: 2.5 kW - Rated power: 2.3 kW - Tank volume (l): 4.0 - Starter type: Pull starter - Weight: 27.0 kg - Fuel: Petrol - Max. sound pressure level (LPA) at 7m: 63.0 dB - Sound power level (LwA): 88.0 dB - Sockets: 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Stanje: rabljeno, Leto izdelave: 2026, Nova škarja za drevesa znamke Westtech CL260 Riskzone 50 m – Hitri menjavni sistem Pladdet CW10 – Woodcracker – Ncodpfjygugqox Agxjr = Dodatne informacije = Letnik izdelave: 2026 Namen uporabe: Gozdarstvo Za več informacij se obrnite na Miguela Cubasa. = Podatki o podjetju = Nahajamo se med Antwerpnom in Brusljem ob avtocesti A12, v bližini pristanišča Antwerpen. Odpiralni čas: od ponedeljka do petka neprekinjeno od 8.30 do 19.00.

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to find out more! This offer concerns the basic version of the machine. All optional equipment and their prices can be found on our website. Hydraulic Press Brake PBO-3117-CNC Delem DA-66T Technical specifications - Rated press force: 1,750 kN - Maximum bending length: 3,100 mm Nsdjrp Dt Topfx Agxjcr - Throat depth (distance between tool and rear wall): 410 mm - Maximum stroke of the bending beam: 310 mm - Maximum open height: 465 mm - Distance between uprights: 2,600 mm - Maximum backgauge travel: 1,000 mm - Motor power: 15.0 kW - Length: 3,300 mm - Width: 1,650 mm - Height: 2,975 mm - Weight: 8,850 kg Tooling - Automatic servo-driven stops on linear guides: 2 pcs - Front sheet supports: 2 pcs - Backgauge travel (X-axis): servo-driven - Beam positioning (Y-axis): independent servo control of Y1 and Y2 axes - Punch clamping system: AMADA-type quick-change Delem DA-66T Control - Automatic control of 8 axes increases bending efficiency - Can store 500 programs with 25 steps and 99 repetitions each - Memory for up to 30 punches/dies - 2D/3D programming modes - 17″ TFT touchscreen - Windows-based control software (programming on PC possible) - Crowning control via CNC - Advanced Delem control system - USB port - Provisions for angle sensor connection Professional Support We ensure continuous contact with our customers. That's why, when purchasing a machine, we provide a support package for professional assistance from Otinus technicians. Visit and Test Our Machines Take part in an exclusive presentation, where a qualified Otinus technician demonstrates the full functionality of the machine. You may provide technical drawings and sample material. Manufactured in Turkey Scope of Supply: A 2-day operator training & commissioning - Day 1 (up to 8 hours) – commissioning and control system training - Day 2 (up to 8 hours) – independent operation under supervision of our technician, with possibility to program specific parts Telephone consultation with a specialist - From 7:30 to 21:00 (Mon-Sat) – 8-hour package, to be used within 12 months Free rental of transport rollers and two jacks to facilitate machine installation at customer site. Rollers and jacks are supplied on request (at least 7 days before machine delivery). Terms of Cooperation - 24-month warranty period - Delivery time: approx. 6-8 weeks Not applicable if the machine is marked as available from stock. - Machine is brand new - Warranty and post-warranty service by the seller - Customer is responsible for the machine during unloading and transport on customer’s premises.

Leto izdelave: 2024, stanje: novo, We have screening drums for Doppstadt SM518 and SM620 available in stock. PLEASE INQUIRE ABOUT CURRENTLY AVAILABLE PERFORATIONS. We manufacture and supply screening drums for both mobile and stationary machines, including: - Doppstadt SM 414 - Doppstadt SM 518 - Doppstadt SM 618 Ncjdpfjfi Tqbex Agxer - Doppstadt SM 620 - Doppstadt SM 718 - Doppstadt SM 720 - Doppstadt SM 725 as well as for other brands such as Terra Select, Eggersmann, Komptech, Pronar, and more. We also produce custom drums tailored to individual customer specifications. Best regards, and please feel free to contact us.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 24 kg, skupna višina: 1.000 mm, skupna širina: 330 mm, skupna dolžina: 530 mm, La MultiTest 2.5dV est l'une des machines d'essai de traction et de compression les plus largement fournies. Le testeur est robuste, précis, et peut être entièrement configuré selon vos besoins avec des cellules de mesure, des mors et des logiciels. La MultiTest 2.5dV peut être équipée de cellules de mesure allant de 2 N à 2,5 kN, en fonction de vos exigences. Le logiciel VectorPro Lite est très intuitif et offre une interface claire. Ainsi, le testeur n'est pas seulement utilisé en laboratoire ou en salle de métrologie, mais également en plein cœur de l'environnement de production. Lors de l’utilisation du logiciel, toutes les données sont sauvegardées et peuvent être rappelées ultérieurement. Sans logiciel, le testeur fonctionne en mode autonome et peut transmettre les valeurs mesurées vers un ordinateur de différentes manières. Le prix comprend une cellule de mesure au choix et des câbles, ainsi que la livraison aux Pays-Bas et en Belgique, la mise en service et la formation. Nous offrons une garantie de 2 ans. Le supplément pour le logiciel VectorPro Lite est de 1 000 €, les mors ne sont pas inclus dans le prix. Ncedpfx Aox Apntegxer

Stanje: novo, JAN REILING BV has an extensive inventory with over 15,000 different DEMAG parts, ranging from nuts to complete cranes. In addition to new parts, we also supply used parts, hoists, and cranes. Our refurbished hoists, cranes, parts, and drives are available in fully overhauled condition from our warehouse. JAN REILING BV delivers exactly what you're looking for without delay. Njdpfx Agoh Upx Iexocr JAN REILING BV has built up an extensive supplier network across Europe. In addition to DEMAG, we can quickly and cost-effectively supply you with parts for all other brands as well. We offer a wide range of new Demag parts from stock, including: rope guides, hoist ropes, brake linings, rope pulleys, hoist motors, trolley motors, fine lift motors, bottom blocks, load hooks, travel wheels, pinions, radio controls, bottom hooks, cable drums, trolleys, motors, travel motors, ropes, chains, and more. KBH KBF KBS KBA KBU 13/3PF 13/6PF 13/3KF 13/6KF 16/6KF 16/8KF 52D 52DF 62D 62DF 63D 63DF 72D AFW D04 D05 D06 D08 ZBA ZBF ZBR DH P100 P625 P632 P425 P408 P412 P00DH P10 P1250 P1201 DMR DR DC PK DK Contact us to discuss the available options. We supply both new and used equipment.

Leto izdelave: 2006, stanje: rabljeno, Storti used modules in stock. Ncsdjmxfh Ajpfx Agxjr

Leto izdelave: 2012, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, For sale is a CFT Compact Filter Technic dust extraction unit, model HKAF 12-30. The unit is fully operational and ready for immediate use upon connection. All documentation for the unit is available via CFT Digital. Contact details can be provided after purchase. Technical data: - Year of manufacture: 2012 - Length: 2,476 mm - Width: 1,277 mm - Height: 2,330 mm - Weight: 600 kg - Exhaust air volume: 28 m³/min - Filter elements: 12 units - Filter area: 30 m² - Filter material: PMB 600*500 - Pulse jet valves: 4 units - Rotary indexing controller: 12 cycles - Compressed air parameter: 4.5 bar Loading and/or shipping available at additional cost. All prices are subject to VAT. Nedpfxorfcpms Agxocr Inspection possible by appointment. Contact us — our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you in need of a high-quality yet affordable metalworking machine for your production needs, or do you wish to sell one? For further information or contact options, please visit our website.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EDGE CELOVITA LINIJA VKLJUČUJE: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE POLNILNIK V200, leto izdelave 2010 15.120 delovnih ur Ncjdpfx Aeya Nf Iegxer Kapaciteta 9.000 kartonov na uro 2. TETRA PAK ACHX 10-0400-44 HELIX AKUMULATOR KARTONOV V400, leto izdelave 2010, 17.431 delovnih ur 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM NADGRAJEN V300, leto izdelave 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, leto izdelave 2010, 10.914 delovnih ur 5. TETRA PAK FILM WRAPPER 32 V400, leto izdelave 2010, nikoli uporabljen, samo 45 ur! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, leto izdelave 2010, wrap around 7. TETRA PAK LINE CONTROLLER LC30+ 8. TRANSPORTNI SISTEM 9. VKLJUČEN TISKALNIK VIDEOJET 1620 LINIJA JE V STANJU KOT NOVA. LOKACIJA – ŠVEDSKA. TAKOJ PRIPRAVLJENA ZA DEMONTAŽO IN POŠILJKO. CENA PO POVPRAŠEVANJU.

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 274 h, dvižna višina: 9.750 mm, vrsta goriva: električni, Drivetrain Drive: Wheel Weights Unladen weight: 2,470 kg Functional Lifting capacity: 300 kg Working height: 1,175 cm CE certification: yes Condition Technical condition: good Optical condition: good Additional information Transport dimensions (L x W x H): 2.50 m / 1.20 m / 2.47 m Platform type: Flat Ncsdpoyyg Nfefx Agxsr Further Information For more details, please contact Tobias Mayr. Haulotte Compact 12 11.75m Electric Scissor Lift With its unrivaled robustness, the COMPACT 12 scissor lifts are perfectly adapted to the demands of your construction sites. Every sub-assembly has been optimized, from the chassis and the scissor arms to the platform. The COMPACT 12 scissor lifts guarantee high productivity and optimal utilization. Manufacturer: Haulotte Model: Compact 12 Year of manufacture: 2017 Recorded operating hours: 274 hours Net weight: approx. 2,470 kg Working height: approx. 11.75 m Platform height: 9.75 m Load capacity: 300 kg Built-in charger Non-marking tires Transport dimensions (L/W/H): 2.50 m / 1.20 m / 2.47 m - Guardrail is foldable, height then 1.77 m UVV certification will be carried out anew upon request. Miscellaneous: Affordable delivery available Europe-wide. Viewing is only possible by appointment. We are happy to accept your equipment/construction machinery as part exchange. We can offer you a tailored finance or leasing package (for business customers only). If you have any questions, please contact us. All prices ex location 86684 Holzheim. All information subject to change. Errors, printing and transmission mistakes, and prior sale reserved. All details regarding color, equipment, condition, features, etc. of the offered vehicles are provided without guarantee. Typos/mistakes/prior sale reserved.

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Gema Letnik 2018 z 6 avtomatskimi pištolami, 2 ročnima pršilnima pištolama maks. dimenzija prehoda: DxVxŠ, 3 m x 2 m x 1,1 m Magic Compact BA04 Sistem za menjavo barv Magic Compact BA4 OptiCenter OC2 Naprava za prašno lakiranje OptiMatic AS06-8P Dvižna oprema ZA7-23 Monociklon 24.000 [Nm3/h] od Therma Dodatni filter izpušnega zraka 24.000 [Nm3/h] STS sistem za zatiranje požara Caldan Viseča transportna naprava Power-Free od Caldan Ncjdpfxsy Al T Ij Agxor Letnik 2018 približno 120 tekočih metrov, z 12 vozički za nosilce blaga po 3 metre Lastna izdelava Protaurus grelnica na plin za žganje Protaurus Letnik 2018 Weishaupt gorilnik tip WG40N/1-A, moč 500 kW popolnoma z nadzorom in dodatki brez izolacijskega materiala, ohišje peči je potrebno obnoviti Celoten sistem Gema in Caldan profesionalno zapakiran Profesionalna priprava za ponovno sestavo Gema in Caldan Postavitev priložena Stroški prevoza, ponovne montaže in zagona bremenijo kupca

Stanje: skoraj kot novo (rabljeno), Nabídka sestává z: Patentovaný skládací a sešívací systém zajišťuje přesné umístění spon • Kapacita zpracování: až 25 listů při hmotnosti papíru 80 g/m² • Podporované formáty papíru: • Minimum: 105 × 210 mm • Maximum: 325 × 450 mm • Sériové zpracování s plochými nebo očkovými sponami možné • Až čtyři sešívací hlavy lze použít současně na čtyřech různých pozicích • Vybaveno boční i vertikální funkcí zarovnání hran • Pásový dopravník s válečkovým vedením zajišťuje rovnoměrný a bezproblémový transport papíru • Nastavitelné ohýbače zaručují čistě přiléhající, ploché spony • Integrovaná senzorika včas detekuje poruchy a snižuje zmetkovitost • Před čelním ořezem je brožura slisována pro dosažení výrazného a ostrého ohybu • Čelní ořez probíhá přesně paralelně s linií ohybu brožury • Vestavěný, nastavitelný vykladač s rozkládáním umožňuje přehledné ukládání hotových produktů. Nedpfxeyl Syxj Agxecr

Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 115 h, dvižna višina: 6.200 mm, vrsta goriva: električni, Unladen weight: 1,730 kg Lifting capacity: 350 kg Working height: 820 cm Technical condition: good Visual condition: good Transport dimensions (L x W x H): Length 2.48 m, Width 0.81 m, Height 1.99 m Please contact Tobias Mayr for further information. Haulotte Compact 8 with 8.20 m working height Electric scissor lift platform Year of manufacture: 2021, in excellent condition, only minor external soiling, see pictures. Exceptional productivity Load capacity up to 350 kg Drivable at full working height Indoor and outdoor use with the same load capacity Optimum operating time Robust, reliable, easy to maintain Brand: Haulotte Model: Compact 8 Year: 2021 Operating hours (read): 115 hours Net weight approx. 1,730 kg Working height approx. 8.20 m Platform height: 6.20 m Capacity: 350 kg Gradeability: 25% Built-in charger Nedpouraaxsfx Agxscr Platform extendable up to 323 cm length On request, a new UVV safety inspection can be carried out. Dimensions: Length: 248 cm Width: 81 cm Height: 199 cm Other information: Affordable delivery possible Europe-wide. Inspections are possible by appointment only. We are happy to accept your equipment / construction machinery in part exchange. We will be pleased to provide you with a tailored finance or leasing offer (only for business customers). If you have any questions, please contact us. All prices ex-site 86684 Holzheim. All information is non-binding. Subject to alterations, printing and transmission errors, and prior sale. All details regarding color, equipment, condition, features, etc. of the offered vehicles are without guarantee. Errors in writing/mistakes/prior sale reserved.

Leto izdelave: 1988, stanje: rabljeno, Výrobce: ONA Electro-Erosion, S.A. (Španělsko) Ncsdpfxowf E Auo Agxor Model: ONA-COMPACT 30 Rok výroby: 1988 Výrobní číslo: 5026/5912 Evidenční číslo: 5026/8812 Typ: Hloubička (elektroerozivní stroj, EDM) Napětí: 220 V Proud: 5,6 A Výkon pulzního zdroje: 2 x 0,75 HP Scheinový výkon: 2,13 kVA Frekvence: 50/60 Hz Předpokládané pojezdy stolu: 300 x 200 mm Objem dielektrické nádrže: 100–150 l Přibližná hmotnost: 1000–1200 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm Nsdpfxovz Hq To Agxjcr - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. Nedpfx Agovz Hq Hexjcr They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² Nsdovz Hqyepfx Agxocr - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 Nsdpfx Agjvz Hqtoxecr The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet Ncodpfxsvz Hqme Agxor The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution. Ncedjvz Hqgspfx Agxer