Generatorski sklop takoj na zalogi

Atlas Copco Typ Atlas Copco P 2500i AP S5 50Hz 230V

Stanje: dober (rabljeno), Renault 270 DCI crane truck, 19 tonnes, Year: 2002, 470,000 km. Engine replaced with factory exchange unit at 250,000 km. Crane capacity: 5.5 tonnes. Technical inspection: passed. No remote control for the crane. Iodpfjrhzy Hjx Al Notf

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments Itjdpfxoqt Dmyj Al Nsf - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: dober (rabljeno),

Leto izdelave: 1991, stanje: skoraj kot novo (rabljeno), skupna masa: 1.420 kg, največja hitrost vrtenja: 1.485 obr/min, 3 stainless steel spiral volute process pumps 2 x CPK-CM 250-315, year of manufacture 1991 1 x CPKN-C1 250-315, year of manufacture 2011 !!! Price per unit !!! Pumps were operated on a test bench and all have very low operating hours! See pictures!! Flow rate: 1001 m³/h (278 liters/second) Delivery head / Pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: Single-acting mechanical seal with flushing water Manufacturer: Burgmann Itjdpfxoqabiao Al Nof Impeller type: Closed radial impeller Impeller diameter: 324 mm Bearing type: Rolling bearing Lubrication: Oil Oil level monitoring Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing lantern: Cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without spacer sleeve Baseplate: Painted cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor output P2: 75 kW Thermal class: F Motor protection: IP55 Power factor (cos phi): 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Stanje: novo, Leto izdelave: 2025, Delivery every Monday/Tuesday! Reliable! Mobile folding bench 1400/2.0mm without rotary shear We are your partner when it comes to sheet metal processing machines. Our commitment is to deliver high-quality and dependable work to exceed your expectations! Our success is rooted in our passion and dedication to our work! Technical data - Maximum working length: 1400 mm - Maximum steel sheet thickness: 2.0 mm - Bending beam width: 24 mm - Weight: approx. 190 kg (manual machine) - Upper beam can be adjusted in three positions - Maximum clear opening between beams: 80 mm - Nationwide delivery within Germany: 180 EUR Itodpfx Aeb Hqa Esl Nsf - Price: 1450 EUR - Including transport wheels - Delivery time: weekly - Cash on delivery - Optional rotary shear (max. cutting performance up to 0.8 mm steel sheet): 350 EUR - Optional manual seam forming machine: 75 EUR - The machine complies with CE standards and includes a 12-month warranty. We issue invoices with 0% VAT (intra-community delivery) as well as with 19% VAT. We look forward to hearing from you!

Stanje: novo, lastna masa: 540 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.000 kg, dolžina tovornega prostora: 4.050 mm, širina tovornega prostora: 2.000 mm, velikost pnevmatike: 195/55R10C, Alufelgen, Felge schwarz, Car transporter from manufacturer ANSSEMS, model MSX3000 405x200 Go-Getter. The Anssems car trailer comes as standard with an aluminium floor, black side edge profile, black alloy wheels, LED lighting, storage box, external lashing rings on the frame, aluminium loading ramps that can be stored under the loading platform, low chassis, robust welded steel frame, jockey wheel, and a V-drawbar. We also offer accessories for Anssems car transport trailers such as high tarpaulins, side wall extensions, wheel chocks, rear support leg sets, car tie-down straps, and anti-theft devices. Iodpfsq Rfl Tjx Al Njtf

Leto izdelave: 2025, stanje: novo, ⭐⭐⭐⭐⭐ (5.0) 58 Reviews ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Shipping available: 30-day delivery ✈️ ✅✅✅ Energy Class A+++ ✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ ✳️Maintain your liquidity! We offer a range of financing options to ensure your investment has the greatest chance for success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery times❗ ⌛⏰►►► ✨✨ Buy directly from the manufacturer and benefit from better prices and quality! ✨✨ Benefit from 40 years of Proton’s expertise in surface coating technologies. ➖➖➖➖➖ Ijdpfxsghf R Ue Al Netf ☘️ Environmentally friendly ☘️⚡️ Green Energy ⚡️☘️ ⭐ Powder Curing Oven with Gas or Diesel Heating - BOXLINE 15-3025 ✔️ Internal dimensions: 1500*3000*2100 mm ✔️ External dimensions: 1780*4000*2500 mm ✔️ Volume: 9 m³ ✔️ Heating capacity: 90,300 Kcal/h ✔️ Circulating air flow (fan): 6,800 [m³/h] ✔️ Circulating fan power: 2.2 [kW/h] ✔️ Digital temperature control, continuously adjustable up to 220°C ✔️ Sandwich panels: Interior 1 mm galvanized steel, Exterior 1 mm powder-coated steel ✔️ Adjustable air outlets and air duct channels for uniform air distribution ✔️ Adjustable curing temperature, curing time, and exhaust fan operation ✔️ Audible signal at the end of curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140 mm mineral wool. Walls: 140 mm (50 mm rock wool + 100 mm glass fiber) ✔️ Heating method: Indirect heating ✳️Operating Principle✳️ This oven is designed for heating parts coated with powder paint. The coating polymerizes at approx. 200°C (depending on the type of powder used) and forms a film on the metal surface. Temperature control is performed by a control unit, which receives signals from a temperature sensor inside the oven. ✳️Oven Body✳️ The body of the polymerization oven consists of thermally insulated panels, vertically interlocked and sealed with heat-resistant compound. Conveyor gaps at the oven door channels can be provided as required. Optional double swing doors are available. ✳️Heat Exchanger✳️ The heat exchanger is installed on the side of the polymerization oven housing. Its internal design and materials allow the chamber temperature to be raised up to 230°C and maintain acceptable temperature differentials at various locations. Heat exchanger made from 3 mm thick AISI310 grade STAINLESS STEEL. ✳️Recirculation Fans✳️ Air circulation inside the oven is accomplished by four recirculation fans with insulated chassis. Wing-type air impellers are commonly used. ✳️Digital Fully Electronic Temperature Controller✳️ ✳️Exhaust Fan✳️ Used for extracting and discharging gases produced during powder polymerization in the oven. If required, the exhaust fan can run continuously after a certain period or be activated automatically at intervals. ⭐Follow us for new campaigns⭐ ☀️ 2 YEARS WARRANTY ☀️

Stanje: rabljeno, obratovalne ure: 1.980 h, moč: 103 kW (140,04 KM), vrsta prenosa: mehanski, vrsta goriva: dizel, prva registracija: 05/2020, barva: zelen, skupna masa: 10.450 kg, prevoženi kilometri: 1.980 km, lastna masa: 6.900 kg, največja dovoljena obremenitev: 3.550 kg, vzmetenje: drugo, število sedežev: 2, Oprema: kabina, klimatska naprava, pogon na vsa štiri kolesa, Front hydraulics, single owner, radio, power steering, new general and emissions inspection (HU/AU), AutoPowr transmission, diesel engine with hydrostatic power steering, all-wheel drive, first registration: 25.05.2020, 103 kW, 4,525 cm³, 1,980 operating hours, industrial front loader, front PTO, front hydraulic system, Autotrac preparation, 360° cabin lighting, cabin suspension, suspended front axle, air conditioning, heating, Command Arm display on the A-pillar, radio, two-seater, cup holder, 40 km/h road approval, single owner, alloy wheels, unladen weight: 6,900 kg, permissible total weight: 10,450 kg. FOR US, CONDITION AND OVERALL IMPRESSION ARE DECISIVE; PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the listed number. *TRADE-IN, PART-EXCHANGE OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All details without guarantee.* More offers available on our website. The description and stated details do not constitute a warranty and are not binding. The binding basis is the purchase contract concluded at the dealership at the time of sale. Errors and prior sale excepted. Itedpjvic Drofx Al Njf

Leto izdelave: 2022, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), The CE15 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories such as rotary nozzles, chemical injectors, and a sandblasting kit. Comparable but not identical to Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop Itedpfshf Na Ssx Al Njf General specifications: ----- Drive motor output: 11.2 kW (50Hz) / 13 kW (60Hz) Voltage: 400V (50Hz) - 440V (60Hz) Amps: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Supplied with standard accessories.

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.700 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 180 l, barva: bela, Izhodni tok: 435 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 110 kW (149,56 KM), neprekinjena moč: 100 kW (135,96 KM), skupna dolžina: 2.750 mm, skupna širina: 1.100 mm, skupna višina: 1.450 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Ricardo, Cummins, vrsta hlajenja: voda, vrsta vhodnega toka: trifazni, Three-phase stationary generator set Proton ZPP 100 (100kW - 110kW) in a compact, weatherproof and additionally soundproofed enclosure. The genset is equipped with an external automatic mains failure panel (AMF/Autostart) and many additional features detailed in the description below. • Model – Proton ZPP 100R AMF • Maximum power output – 110 kW / 140 kVA • Rated power output – 100 kW / 125 kVA • Ready to run – Yes (filled with fluids, test run performed) • Type – Industrial generator • Condition – Brand new • Manufacturer – Proton • Generator type – Three-phase • VAT Invoice 23% • Year of manufacture – 2024 • Warranty – 36 months ⊳ ENGINE: Engine model – Ricardo R6105AZLDS Fuel type – Diesel Itsdpfxjtpnm Ue Al Njf Fuel consumption: - 22.0 litres per hour (at 75% maximum load) - 14.5 litres per hour (at 50% maximum load) Engine configuration – Inline (R4) Displacement – 7000 cc Direct injection Lubrication system – Forced, with oil pump ⊳ ALTERNATOR: 100% Copper windings AVR voltage regulator – Yes Alternator model – Proton 274D Rated output 400V – 100,000 Watts (100kW / 125kVA) Maximum output 400V (for up to 15 minutes) – 110,000 Watts (110kW / 140kVA) Rated output 230V – 33,000 Watts Maximum output 230V (for up to 15 minutes) – 36,600 Watts Rated current (400V) – 435.0 A Circuit protections – C16, C32, main – 200A Frequency – 50 Hz Alternator type – Synchronous ⊳ ENCLOSURE: Sound-attenuated enclosure Weatherproof housing Three-phase and single-phase sockets Fuel tank capacity – 180 litres Average run time at full tank – 20 hours Transport set – Forklift pockets and lifting hooks for crane/boom truck (HDS) Dimensions – 110 x 275 x 145 cm Gross weight – 1830 kg ⊳ FEATURES: Voltage stabilizer (AVR) – Stamford SX460 (2%) - Electronic voltage regulation under variable loads - Electronic frequency regulation Automatic AMF operation (Automatic mains failure) Overload and thermal protection Oil pressure, oil level and coolant level sensors Glow plugs Oil sump heater Coolant heater Battery – 2x 120Ah Automatic battery charger ⊳ CONTROLLER: Controller model – Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module expansion SCADA system integration Additional outputs – for 4G, Ethernet, RS232/485 connections Remote control and monitoring via GPRS – Optional Modbus and Ethernet communication – Optional Why work with us? We are a company exclusively specialising in generator sets, with over 17 years of experience in the industry. We constantly strive to ensure that our products represent the highest quality and reliability. Over the years, we have provided solutions for more than 10,000 customers throughout Poland, even in the most remote locations. We rigorously select our component suppliers, ensuring that only industry leaders are involved. We offer a wide range of gensets from 6 to 300kW with various engine options, including English Ricardo, American Cummins, or German Deutz, and in configurations tailored to our clients’ specific requirements.