Telemecanique Nautilus Xml Bm02V2S11 nakup rabljenega (77)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, vhodni tok: 238 A, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced Laedpfjvf E Avjx Al Nea - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 30.408 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 550 kg, skupna masa: 16.000 kg, kapaciteta rezervoarja za olje: 600 l, leto zadnje generalne obnove: 2024, Technical Specifications of the Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 (as of April) Main press force: 50 t Specific press force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under working conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: 30 kg/m³: 6 to 7 t/hour 50 kg/m³: 7 to 9 t/hour 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspaper): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the baler: The machine has been partially overhauled in our workshop and general maintenance work has been carried out. After completion of the overhaul, the baler was tested during operation and is available for sale at short notice. The following overhaul work was performed: General: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel guideways welded and smoothed Hydraulic unit: - Hydraulic oil tank drained, tank cleaned, new oil filled - Oil filter and air filter replaced Ljdpfxou Thhro Al Nsaa - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - Menu language set to English in the program - Two key switches on the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Limit switch for the flap replaced - Electrics of the wirbulator renewed, connected, and tested Press ram: - All four guide rollers of the press ram removed and replaced - Main hydraulic cylinder dismantled, disassembled, and partially overhauled; cylinder barrel honed, complete seal set replaced, leak test carried out - All plastic wear pads on the press ram replaced Pre-press flap: - Both bearings on pre-press shaft replaced - Both hydraulic cylinders dismantled, disassembled, and partially overhauled; both cylinder barrels honed, complete seal sets replaced, leak test carried out - Scraper flap on pre-press replaced Tying unit: - Two complete needles with wire guide rollers replaced - Needles adjusted and set - All wire guide rollers in the needle heads replaced - Twister fingers replaced - Two twister shafts replaced - All 8 wear plates on the twist mechanism under the twister fingers replaced Scope of delivery: Only the baler is being sold. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. Inspection by appointment. We assume no liability for the technical details or possible errors.