Stiskalnica Za Trupe nakup rabljenega (84.562)

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, stiskalna sila: 962 t, hod: 200 mm, širina mize: 1.400 mm, dolžina mize: 2.750 mm, delovna širina: 1.400 mm, obratovalna temperatura: 135 °C, obratovalni tlak: 290 letvica, višina obdelovanca (maks.): 200 mm, teža obdelovanca (maks.): 250 kg, premer cilindra: 270 mm, širina odpiranja: 200 mm, širina plošče: 1.400 mm, pritisk: 25 letvica, temperatura: 150 °C, We are offering this used ITALPRESSE MARK C/14-27.5/2 veneer press, year of manufacture 2014. Cjdpfxeyxp Two Agtogt Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level, continuous cycle press system with top-mounted hydraulic cylinders Machine in perfect working condition CE safety standards compliant The machine can also be purchased together with other machines for a complete production line. Heated plate dimensions: 1400 x 2750 mm Number of heated plates: 2 pcs. Number of levels: 1 pc. Cylinder stroke: 200 mm Opening height: 200 mm Loading side: 1400 mm Specific pressure at 100%: 25 kg/cm² Total pressing force: 9620 kN Cycle time: 2–30 min Working temperature: 135°C Max. working surface temperature: 150°C Designated heating medium: thermal oil Number of pressing cylinders: 6 pcs. Diameter of pressing cylinders: 270 mm Retraction cylinders: 4 pcs. Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover size: 1200 x 2400 mm Moulds are excluded from this offer Available at additional cost Powered feed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8–40 m/min Photoelectric sensor control Electropneumatic vibrating device for the upper Mylar sheet Electronic flatness control Automatic switching to pressing speed Compressed air device in lower press table Cylinder base plates are insulated and drilled from solid material for water cooling Frequency control of feed speed Powered discharge roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet/control panel with Siemens S7 PLC Dismantling and collection at buyer's own expense Pickup location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or call us.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Na prodaju: Operativna linija za proizvodnju peleta (Kapacitet 2,5–3 t/h) Polovna fabrička oprema dostupna je za kupovinu zbog povećanja kapaciteta. Mašine su trenutno u radu i mogu se pregledati svakog dana od 08:00 do 15:00 časova. Tehničke karakteristike: Csdpfxsy Ed Szj Agtogt * Troprovodni rotacioni sušač: Ø2300 x 12000 mm / 7,5 kW * Kotao na vruć vazduh: Snaga 2 MW * Cevi sušača + cikloni: Primarni ciklon (Ø1700) + sekundarni ciklon (Ø1700) * Glavni ventilator za sušač: 75 kW * Čekićara (mlin): 110 kW (uključena pogonska jedinica) * Pužni transporter: Ispod mlina, 2,2 kW * Kantasti elevatori: Tri komada (visine: 6m, 8m i 11m). Izrađeni od pocinkovanog lima sa koficama od 1400 ml; motori 2,2 kW. * Transportni ventilator: Za sekundarno usitnjavanje, 30 kW * Muench RMP520 presа za pelete: Opremljena sa dva motora od 75 kW (uključena pogonska jedinica) * Automatski sistem za podmazivanje: Za presu za pelete * Praćenje temperature valjaka: Integrisano za presu Detalji i dostupnost: Stanje: Proizvedeno 2014. godine; u izuzetnom stanju. Lokacija: Ivanjica, Srbija. Vlasnik: Crown Forest d.o.o. Dostupnost: Spremno za preuzimanje krajem juna 2026. godine. Za sve dodatne informacije pozovite.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Bobst SP 104 ER Stroje za izsekovanje Izsekovalnik z odstranjevalno in izlagalno postajo Tehnične specifikacije: Papir najmanj 90 g/m2 Karton največ 2000 g/m2 Valovita lepenka največ 4 mm Minimalna velikost pol: d x š 350 x 400 mm Maksimalna velikost pol: d x š 740 x 1040 mm Maksimalne dimenzije izsekovalne šablone: maks. d x š 725 x 1040 mm Rezila sila: 250 ton Delovna hitrost: maks. 8.000 listov/uro Cgedpfx Ajwgz H Eogtst Sistem "centerline" za hitro menjavo orodij Nastavljivo centriranje pri odstranjevanju izrezkov in pri izlaganju Bobst-Elektronski upravljalni sistem stroja C.U.B.E. (Control Unit Bobst Electronic) Non-stop podajalnik Jeklena plošča Senzor za dvojni list Vlečna letev na levi strani, vlečna letev na desni strani Mikrometrična nastavitev Centerline Dvojno delovanje odstranjevalca izrezkov, izlagalna postaja Hitro vpenjalni okvir za odstranjevanje izrezkov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Bobst SP102-BMA Foilmaster Opremljen z: - Popolnoma avtomatskim podajalnikom - Nadzorom dvojnega lista - Center Line (sistem za hitro poravnavo orodij) - Enoto za vročo folijo - 2x satasta orodna nosilca (honeycomb chase) - 2x izsekovalna orodna nosilca (die cutting chase) - 16 neodvisnih ogrevalnih con - Gredi za napredovanje folije - Avtomatski iztok - Povišana izvedba (High Pile) Tehnične specifikacije: Maksimalni format pola: 720 mm x 1020 mm Minimalni format pola: 350 mm x 400 mm Delovni materiali: - Papir/karton: 80–2000 g Cgedpfx Agowgz Rkjtet - Valovita lepenka: tip E in B, največ 4 mm Rob za prijem: 9–15 mm Maksimalni format zlatotiska: 680 mm x 1010 mm Maksimalna hitrost: 7.500 listov/uro

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Univerzalni neprekinjeni podajalnik Vzporedna priprava skladovnic 4 sprednje ležeče vodila Poteg vodilo na strani upravljavca (OS) 16 neodvisnih ogrevalnih con Satasta plošča Stranska vodila za folijo Motorizirana napetost folije, zračno hlajenje Format: 102x72 cm Minimalni format: 40x35 cm Hitrost vročega tiska: največ 5.000 kosov/uro Hitrost izsekovanja: največ 7.500 kosov/uro Cgodpfevyn Ttox Agtot

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, BOBST SPO 1600 Maksimalna hitrost: 5.000 na uro Leto: 1983 Maksimalna dolžina: 1.075 mm Csdpfxjxcayyj Agtsgt Maksimalna širina: 1.580 mm Popolnoma obnovljeno pri Bobst leta 2015 Centralna linija

Stanje: zelo dobro (rabljeno), Kataloška številka 7984 TEHNIČNI PODATKI - sila stiskanja: hidravlična - oblika briketa: okrogla - premer briketa: 70 mm - premer zbiralnika: 1000 mm - zmogljivost: do 10 briketov/min, približno 90 kg/uro - avtomatsko delovanje stroja - motor: 5,5 kW - dimenzije (D/Š/V): 1800x1200x1500 mm - teža: približno 650 kg PREDNOSTI – italijanska proizvodnja – rabljena briketirka – nebarvana – zelo dobro ohranjena Neto cena: 33.900 PLN Neto cena: 8.070 EUR po tečaju 4,2 EUR Cgsdpsy Id Rvsfx Agtst (Cene se lahko spremenijo ob večjih valutnih nihanjih)

Stanje: novo, Leto izdelave: 2026, Gannomat Concept 70 Eco Lamella case clamp with rapid traverse Technical Specifications: Lamella case clamp from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Top lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous 40 mm thick, coated support plates - The pressing force of the pressure beams is infinitely adjustable electronically via 2 potentiometers and set via a frequency converter—thus, torque transmission is absolutely wear-free. - Pressing force for the horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for the vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Including options: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speeds 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45° carcasses. Simple operation via 6 separate push-buttons, freely selectable pressing time preselection with automatic opening, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg Codpfx Aey Egz Sjgtsgt - immediately available -

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1985, Bobst SP 102 CER – Na voljo takoj, odlično ohranjena Leto izdelave: 1985 Maksimalna velikost: 1020 x 720 mm Minimalna velikost: 400 x 350 mm Maksimalna hitrost: 8.000 listov/uro Maksimalna sila rezanja: 250 t Codpfx Aewathhjgtjgt Papir: najmanj 80 g/m² Karton: največ 2.000 g/m² Centerline sistem Neprekinjeno podajanje – Feeder Non-Stop Samodejno neprekinjeno podajanje s samostojnim vlagalnikom listov Stransko vodenje Quick Lock sistem za hitro zaklepanje

Stanje: pripravljen za uporabo (rabljen), Popolnoma avtomatski ploskovni izsekovalni stroj, Neprekinjeno podajanje, Avtomatska vakuumska plošča, Cgodpfx Agswly D Hstet Postaja za čiščenje dvojnih pol, Obračalni okvir za izsekavanje, (Neprekinjen izhod - paketna dostava) s transportnim trakom, Izsekovalna sila 300 TON, Hitrost do 4.500 kos/h, omogoča delo z valovitim kartonom debeline max. 9 mm, min. 0,9 mm, Format: max. 1055x1575 mm, min. 400x600 mm, Standardna oprema Bobst SPO 1575 EG 1980, popolnoma obnovljen leta 2015, veriga zamenjana 2024.

Stanje: dober (rabljeno), Koda: 0278 Znamka: COMIL BIESSE Model: COSMO Codpfoyyzvgsx Agtegt Samonastavljiva spenjalna stiskalnica za pohištvo, opremo, kuhinje, kopalniško pohištvo in različne namene Največja delovna dolžina: 2500 mm Delovna višina: 1200 mm Delovna širina: 700 mm Hitrost pozicioniranja: 3,5 m/min Skupna moč: 3,7 kW Skupne mere: 3760 x 920 x 2280 mm (V) Teža: 2200 kg

Stanje: novo, Leto izdelave: 2024, Stanje: novo Leto izdelave: 2024 Številka zaloge: 9740 Dobavni rok: takoj, vmesna prodaja mogoča Država porekla: Turčija Cena: 6.200 € Leasing obrok: 119,66 € Na zalogi: 1 Dolžina upogibanja: 1.050 mm Maks. upogibna zmogljivost - konstrukcijsko jeklo: 3 mm Premer zgornjega valja: 90 mm Hitrost valjanja: 6 m/min Moč motorja: 1,1 kW Dolžina: 1.630 mm Širina: 700 mm Višina: 1.200 mm Teža: 480 kg 3 valji Asimetrična postavitev valjev 2 pogonska valja preko zavornega motorja Nastavitev zadnjega valja z ročnim kolesom Reže za žico pri spodnjem in zadnjem valju Zgornji valj v odprtini Csdowiqnwepfx Agtsgt Desni/levi tek z dvojnim pedalom Naprava za stožčasto valjanje Navodila za uporabo v NEMŠČINI

Stanje: pripravljen za uporabo (rabljen), Bramidan 4-0F Motor: 4 kW Dimenzije stiskalnice: 250 x 100 x 255 cm Dimenzije bale: 1100 x 700 x 950 cm Teža bale: 200-250 kg Tlak: 18 ton Teža stroja: 1580 kg Naprava se uporablja za zmanjšanje volumna odpadkov, kot so folija, odpadni papir ipd. Cena: 4500 EUR Baler Aventek MK 2500 To je industrijski baler za stiskanje odpadkov, kot so: folija karton / odpadni papir plastika tlačna sila: 25 ton teža bale: 400 kg, odvisno od materiala dimenzije bale: ca. 1200 × 800 × 800 mm čas cikla: ca. 50 s električno napajanje: 400 V moč motorja: ca. 5,5 kW leto izdelave: 2013 Cena: 6500 EUR Baler ORWAK 9020: - motor 2,2 kW - 380V - pritisk 20 ton - dimenzije bale 1100x700x800 - teža bale; odvisno od surovine 200-300 kg Cgodpfxov Ai Uqo Agtot Cena: 5500 EUR

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.315 mm, skupna višina: 1.410 mm, skupna dolžina: 2.030 mm, premer briketa: 40 mm, kapaciteta rezervoarja za olje: 100 l, dolžina vijačnega transporterja: 1.595 mm, moč: 4 kW (5,44 KM), leto zadnje generalne obnove: 2025, širina odprtine za polnjenje: 1.044 mm, Stroj je popolnoma delujoč, v zelo dobrem stanju. Če potrebujete dodatne podrobnosti, nam prosim sporočite. Cedpfx Agex I Abaotogt

Stanje: zelo dobro (rabljeno), Prehodna stiskalnica (korpusna stiskalnica) Elektro-mehanski sistem tlaka Sistem samocentriranja Motorizirani transportni in montažni trak (skozi stiskalnico) mm 4500 Podajalna hitrost (nastavljiva) m/min 10-40 Skupna dolžina stroja (mm) 4400 DIMENZIJE KORPUSNEGA POHIŠTVA Min. dolžina korpusnega pohištva (mm) 250 Maks. dolžina korpusnega pohištva (mm) 2500 Min. globina (širina) korpusnega pohištva (mm) 250 Maks. globina (širina) korpusnega pohištva (mm) 700 Cjdpfx Aoyzh I Ssgtsgt Min. višina korpusnega pohištva (mm) 250 Maks. višina korpusnega pohištva (mm) 1200 Krmiljenje PLC "OMRON" Skupna priključna moč (kW) 8,8

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Cgjdpfxegfm Ryo Agtet Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Leto izdelave: 2013, stanje: rabljeno, We hereby offer you a used PET bottle crusher from the manufacturer BOREMA, model R-1200 F, year of manufacture 2013, for the residual emptying, degassing, and pre-compaction of supplied PET bottles ranging from 0.3 to 2.5 liters in capacity. The machine is equipped with a chassis and can be driven in and out of the feed hopper of your baler. The machine has a throughput capacity of approximately 85,000 bottles, corresponding to around 3 tons per hour. The following technical information is available: Manufacturer: BOREMA Umwelttechnik AG Model: R-1200 F (with hopper for driving the compactor in and out) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Main fuse: 40 A Construction: Inline system Function: Double-rotor press system Rotor pre-tensioning: pneumatic, approx. 16 t Overload protection via anti-blocking system Input material: PET disposable and returnable empty bottles, 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 L capacity Throughput capacity: approx. 3 t/h, equivalent to approx. 85,000 bottles/hour, depending on size Required compressed air capacity: G1/2”, 8 bar, 40 L/min Compaction ratio: 1:3 Internal flange dimensions: 972 x 1,220 mm (L x W) Feed opening: 565 x 1,280 mm (L x W) Weight: approx. 2,500 kg Applications: Thanks to the chassis, the PET compactor can be moved into the feed hopper of your baler as needed, ensuring the residual emptying, degassing, and pre-compaction of fed bottles and packaging. For material changes, the compactor is simply removed from the feed hopper, allowing continued baling of paper, cardboard, films, etc. without the use of the compactor. BOREMA PET compactor process: The plastic containers are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pre-tensioned by two air bellows and presses the PET bottles against the second rotating shaft with 16 t of pressure. This crushes, bursts, and degasses the closed plastic container. Residual liquids are drained, and the material drops pre-compacted into the baler. In the event of contaminants, the pneumatically pre-tensioned shaft moves aside and the contaminant is passed through. Csdpfx Agou Thpnjtjgt Key advantages compared to conventional PET perforators with punch spikes or knives: The BOREMA process is significantly more efficient and wear-resistant than conventional PET perforators with spikes or knives. The greatest advantage is that introduced contaminants such as metal parts, stones, bottles with frozen content, and wood pieces are guided through by the pneumatically yielding rotor shaft without the system stopping or suffering major damage. In conventional perforators, spikes or knives may break or become so jammed with contaminants that the system must be shut down and extensively repaired. Remarks: The documentation (operating instructions, CE, electrical/hydraulic wiring diagrams) is complete. Inspection by appointment is possible. We accept no liability for the technical data or any possible errors.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Cena od 2.800 EUR Stiskalnica je idealna za lepljenje do 4200 x 500 x 70 mm Cgjdpfxjg Uk Eie Agtjt Zelo praktična in zelo varčna s prostorom 15 pritrdilnih valjev (membranski valji) Hod pritiska na valj 70 mm, pritisk na valj 6800 N 16 pritrdilnih elementov Nakladalne mere D 4,5 x Š 1,1 x V 0,5 m Lastna teža cca 600 kg Možnosti, cene na zahtevo: 2 vrtljiva okvirja stiskalnice 3 okvirji stiskalnice kot lepilna zvezda 4 okvirji stiskalnice

Stanje: rabljeno, Leto izdelave: 1980, Pritisk 400 t Razmak između stubova 3250 mm Udaljenost sto/klip, veliki hod gore, gornji podešaj 1000 mm Hod 800 mm Površina stola 3250 x 1400 mm Visina stola iznad tla 1250 mm Sila povlačnog jastuka 170 t Hod povlačnog jastuka 200 mm Površina povlačnog jastuka 1800 x 1000 mm Cjdsyx Ik Ujpfx Agtegt Razmak između stubova kod hidrauličnih jastuka 2610 mm Bočni prolaz kroz stubove 800 mm Površina klipa 3250 x 1400 mm Povratna sila 51 t Brzina spuštanja od 300 mm/s Brzina podizanja do 300 mm/s Radna brzina 16 - 33 mm/s Količina ulja 2900 l Snaga pogona 100,0 kW Težina 70,0 t Potrebni prostor (ŠxDxV) 4,9 x 3,1 x 7,6 m sa uljnohidrauličnim pogonom, upravljanje zavisno od pritiska/vremena i hoda, svetlosna zavjesa (Sick) napred i pozadi, hidraulični povlačni jastuk u stolu (upravljiv), hidraulično prigušavanje udarnog reza sa motorizovanim podešavanjem dubine, hidraulično blokiranje klipa, dvoručno upravljanje kako stoji i leži, BEZ puštanja u rad / BEZ daljih radova, slobodno utovareno na kamion

Stanje: rabljeno, Leto izdelave: 1982, Tlak 200 t Razdalja med stojali 1650 mm Hod 600 mm Razdalja med mizo/batnico, velika višina hoda zgoraj, nastavitev zgoraj 1200 mm Površina mize 1600 x 1250 mm Sila vlečne blazine 80 t Hod vlečne blazine 300 mm Površina vlečne blazine 1300 x 900 mm Višina mize nad tlemi 800 mm Površina batnice 1600 x 1250 mm Vsebnost olja 2000 l Pogonska moč 43,0 kW Teža 25,0 t Potrebna površina (ŠxGxV) 2,9 x 2,3 x 5,8 m Višina pod tlemi 0,85 m POSEBNA AKCIJA kot stoji in leži BREZ zagona / BREZ dodatnih del Cgedpfx Aexwdrvogtet prost naklad tovornjaka

Stanje: rabljeno, Leto izdelave: 1991, pritisk 200 t razdalja med stebri 1100 mm hod 600 mm razdalja med mizo in batom, pri največjem hodu zgoraj, nastavitev zgoraj 1100 mm dimenzije mize 1000 x 1000 mm moč vlečnega blazine na mizi 63 t hod vlečne blazine na mizi 250 mm površina vlečne blazine 800 x 750 mm višina mize nad tlemi 800 mm površina bata 1000 x 1000 mm hitrost umika 400 mm/s hitrost dovoda 250 mm/s radna hitrost 22 - 56 mm/s moč pogona 45,0 kW teža 24,0 t zahtevan prostor (ŠxDxV) 2,4 x 1,5 x 5,9 m leto izdelave 1966 - modernizacija 1991 z oljno hidravličnim pogonom, možno reguliranje tlaka/časa in poti, hidravlična vlečna blazina v mizi, zaklepanje bata, dvoročno upravljanje kot stoji in leži, BREZ zagona / BREZ dodatnih del, natovorjeno na tovornjak Cgodpfx Agevzxqrjtet

Stanje: rabljeno, Leto izdelave: 1993, Pressure 500 t Column spacing 2240 mm Stroke 1180 mm Distance table/ram, max. stroke up, ram raised 1800 mm Table size 2050 x 1800 mm Blankholder force in table 250 t Blankholder stroke in table 380 mm Blankholder area in table 1800 x 1200 mm Blankholder force in ram 122 t Blankholder stroke in ram 200 mm Blankholder area in ram 1800 x 1200 mm Ram area 2215 x 1800 mm Cgedpevuk I Nefx Agtot Table height above floor 500 mm Downward speed from 400 mm/s Upward speed 10 - 400 mm/s Working speed 10 - 100 mm/s Foundation depth 3.0 m Drive power 122 + 75 + 64.5 kW Weight 110.0 t Space requirements (W x D x H) 3.6 x 2.2 x 8.5 m Height above floor 6.8 m Approved for manual feeding operations in accordance with German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic blankholder in table and ram, shock absorption, ram locking Foundation depth approx. 3.0 m Currently the press is being overhauled with Siemens S7 control / Pilz safety control A sister machine in as-is, partly dismantled condition can also be offered

Stanje: rabljeno, Leto izdelave: 1993, Pressing force: 315 t Column width: 1,660 mm Stroke: 400 mm Distance table/ram (stroke at top): 600 mm Table size: 1,600 x 1,000 mm Codpfxevuuhme Agtegt Table height above floor: 960 mm Cushion pressure in table: 80 t Cushion stroke in table: 200 mm Cushion area in table: 950 x 650 mm Lateral column passage: 720 mm Ram area: 1,600 x 1,000 mm Oil capacity: 1,400 l Drive power: 57.0 kW Weight: 30.0 t Space requirement (W x D x H): 3.0 x 2.9 x 4.4 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic cushion in the table Can be offered either in current condition (non-operational) or alternatively with new Siemens S7-1500 F control system

Stanje: rabljeno, Leto izdelave: 1982, Pressure: 350 t Column gap: 1,350 mm Stroke: 900 mm Distance table/ram, large stroke upper position, upper adjustment: 1,300 mm Table surface: 1,300 x 1,000 mm Blankholder force in table: 100 t Blankholder stroke in table: 380 mm Blankholder surface: 350 x 285 mm Ejector force in ram: 25 t Ejector stroke in ram: 200 mm Table height above floor: 750 mm Ram surface: 1,300 x 1,000 mm Speed down: from 500 mm/s Speed up: 160 - 470 mm/s Working speed: 16 - 44 mm/s Drawing speed: 57 - 160 mm/s Return force: 32 t Oil volume: 1,700 l Drive power: 91.0 kW Space requirement (W x D x H): 3.75 x 2.8 x 7.2 m Height above floor: 5.28 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) with electrohydraulic drive, light barrier (Sick), pressure/time and path-dependent control, hydraulic blankholder in table (controllable), hydraulic ejector in ram, ram locking in upper dead center, adjustable speed, two-hand operation Cgsdpfx Agevuk Iietot partially disassembled and stored - can be offered without commissioning, with commissioning in current condition, or alternatively with new Siemens S7-1500 F control system.

Stanje: rabljeno, Leto izdelave: 1993, Pressure 315 t Column gap 2060 mm Stroke 700 mm Distance table/ram, stroke up 1100 mm Table size 2000 x 1000 mm Cushion pressure in table 125 t Cgsdpfx Agsvuudzotst Cushion stroke in table 200 mm Cushion area 1200 x 600 mm Table height above floor 750 mm Table height above floor (for floor-level installation) 1100 mm Lateral frame passage 720 mm Ram area 2000 x 1000 mm Oil capacity 1800 l Drive power 90.0 kW Weight 35.0 t Space requirement (WxDxH) 3.6 x 2.75 x 5.65 m Approved for manual loading operations according to German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, stroke damping (with motorized depth adjustment) no foundation pit required can be offered without commissioning (WITHOUT screen / operator console) or alternatively with new Siemens S7-1500 F control, with new operator console and interface