Mm Forsttechnik Syncrofalke nakup rabljenega (85.560)

Stanje: pripravljen za uporabo (rabljen), Transroll vreteno L = 680 mm, Ø navoja: 25 mm, korak: 10 mm, Ø gredi: 20 mm, dolžina gredi: 105 mm, Ø kletke za kroglice: 43 mm, prirobnica: 45 x 66 mm, rabljeno, normalni sledovi uporabe, 100 % delujoče, dobava kot na slikah. Dsdpfjzzihqox Ak Eokt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: Dedpfxjmhhyas Ak Eekt - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Dedemhhypopfx Ak Eskt Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) Djdpfsmhh Anox Ak Eokt - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. Dkodpfx Akemhh Dzs Eot The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: zelo dobro (rabljeno), Face plate Dkedpfxsfm Tqdj Ak Ejt Diameter: 540 mm Height: 125 mm Centring flange diameter: 120 mm Thread pitch: 6 mm Thread: M 120 x 6 Weight: 115 kg

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Faceplate Dkjded Tyu Repfx Ak Eot diameter 400 mm cone 105 mm bolt circle 135 mm estimated age

Stanje: rabljeno, Vice Jaw width: 200 mm Jaw height: 80 mm Dkodpfx Akjdd Tpij Eot Base plate: width (bottom) 250 mm Base plate: length (below) 500 mm Opening width: 250 mm Weight: 72 kg

Stanje: rabljeno, Steady rest Height without base: 350 mm Diameter: 140 mm Dodpfjcrcxpox Ak Eskt Base width: 40 mm

Stanje: rabljeno, travelling steady rest height without base 300 mm Djdpocrcybsfx Ak Eskt diameter 110 mm base width 50 mm

Stanje: dober (rabljeno), skupna dolžina: 1.000 mm, skupna širina: 600 mm, skupna višina: 2.500 mm, nosilnost na odsek shranjevanja: 150 kg, TEHNIČNI PODATKI • Proizvajalec: META • Višina okvirja: 2.500 mm • Širina podstavka: 1.000 mm • Globina okvirja: 600 mm • Nosilnost enega podstavka: 150 kg Dodpfx Aeuk E Thjk Eokt • Število podstavkov na modul: 6 kosov • Površina: pocinkana • Montaža s vstavljanjem • Stanje: rabljeno Velike količine so na voljo takoj. Cene glede na količino, neto cena na kos, brez DDV: Osnovni modul: 1 – 5 modulov: 54,00 € 6 – 20 modulov: 52,38 € 21 – 50 modulov: 50,76 € 51 modulov in več: 49,14 € Dodatni moduli: 1 – 10 modulov: 39,00 € 11 – 25 modulov: 37,83 € 26 – 75 modulov: 36,73 € 76 modulov in več: 35,69 € Dobava iz skladišča Nordhorn. VAŠI KONTAKTNI PARTNERJI PRI NAS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT IN MONTAŽA Z veseljem vam pomagamo pri transportu in montaži izdelka. Izdelek je na voljo za osebni prevzem. Dostava je možna proti doplačilu. Dodatni stroški so odvisni od kraja dostave in obsega pošiljke, podrobnosti pa lahko povprašate pri nas. PLAČILNI POGOJI Plačilni pogoji se določijo ob naročilu. Cena je navedena kot cena na kos/neto cena, kot je navedeno v opisu izdelka (brez DDV). Seveda boste prejeli račun z navedeno ceno DDV. O NAS Podjetje DLK v Nordhornu se ukvarja s prodajo novih in rabljenih izdelkov iz področja skladiščne logistike, transportnih sistemov, skladiščnih regalov, skladišč za tekstil ter strojev za trgovino, industrijo in obrt. Nenehno vam ponujamo zanimive ponudbe za rabljene izdelke različnih proizvajalcev/blagovnih znamk po ugodnih pogojih. Če imate kakršna koli vprašanja, nas kontaktirajte. Štiri zmage – gradniki uspeha podjetja DLK – skladiščna tehnika | Levelmaker® | logistika | rešitve

Stanje: novo, Brusilna plošča Norton new mm 355x40x127 Dkodpfjv Tw Nkox Ak Eot

Stanje: zelo dobro (rabljeno), Prodajam robustno montažno ploščo/strojno mizo z T-utorji. Izdelana iz debelostenske jeklene konstrukcije, pobarvana modro. Odlična osnova za montažo večjih elementov, priprave ali za merilne in obdelovalne namene. • Dimenzije: 2570 x 770 x 200 mm Dkedow Rdtuopfx Ak Ejt • Površina z T-utorji • Natančno obdelan zgornji del • Masa: 900 kg • Možnost transporta ali nakladanja z viličarjem

Stanje: zelo dobro (rabljeno), Profesionalni zunanji mikrometer priznane znamke Mahr, namenjen natančnim meritvam v industriji, delavnici in laboratoriju. Naprava se odlikuje z visoko natančnostjo ter robustno izdelavo, velik LCD zaslon pa omogoča hiter in enostaven odčitek rezultatov. . Merilno območje: 25–50 mm / 1–2” . Ločljivost: 0,001 mm (1 µm) . Funkcije: ZERO, ABS, REL, TOL . Razred zaščite: IP65 – odpornost na prah in brizganje vode . Napajanje: baterija CR2032 (3 V) . Ergonomična, natančna konstrukcija iz kaljenega jekla . Pregleden LCD zaslon . Kataloška številka: 4157042 . Proizvajalec: Mahr GmbH – Nemčija V kompletu: . Digitalni mikrometer Mahr Micromar 40 EWR-S . Merilni standard . Nastavitveni ključ . Dokumentacija in navodila za uporabo . Originalen transportni kovček Stanje naprave: zelo dobro – popolnoma tehnično brezhibna in pripravljena na uporabo. Odlična izbira za industrijske obrate, precizne delavnice in merilne laboratorije. Dksdpfxoxl Rf So Ak Eet

Stanje: zelo dobro (rabljeno), Profesionalni vrtalni držalo priznane blagovne znamke GEWEFA – nemška kakovost in natančnost izdelave. Namenjeno za vpenjanje svedrov in obdelovalnih orodij v CNC rezkalnih strojih, obdelovalnih centrih ter klasičnih strojih s pritrditvijo SK40 DIN 69871. 📌 Tehnične specifikacije: . Proizvajalec: GEWEFA – Made in Germany . Tip: SK40 × Ø1–16 mm . Kataloška številka: 28.05.046.001 / 28.05.046.002 Dsdpfxsxizbfj Ak Eskt . Stožec: SK40 DIN 69871 AD/B . Objemni razpon: Ø1 – 13 mm . Leto proizvodnje: 2007 . Stanje: rabljeno, zelo dobro – popolnoma tehnično brezhibno ✅ Prednosti: . Natančna izdelava – visoka koncentracija in stabilnost orodja . Originalni izdelek iz Nemčije – ne kitajska kopija . Idealno za serijsko proizvodnjo in precizno obdelavo . Pripravljen za takojšnjo uporabo Cena navedena za 1 kos.

Stanje: rabljeno, skupna dolžina: 1.220 mm, skupna širina: 400 mm, skupna višina: 2.000 mm, nosilnost na odsek shranjevanja: 150 kg, Ponujamo rabljene industrijske regalne sisteme. TEHNIČNI PODATKI Proizvajalec: Nedocn Tip: Shelf N Višina okvirja: 2.000 mm (nova roba) Polica: 1.220 x 400 mm (rablena roba) Nosilnost police: 150 kg Število nivojev: 5 kosov Sistem vtične montaže Diagonalni nosilec Cenik (neto cena za kos, brez DDV): Osnovni moduli: Dsdey Dgglopfx Ak Ejkt 1 – 5 modulov: 41,50 € neto za kos 6 – 20 modulov: 39,43 € neto za kos 21 – 50 modulov: 37,35 € neto za kos od 51 modulov naprej: 35,28 € neto za kos Dodatni moduli: 1 – 5 modulov: 29,50 € neto za kos 6 – 20 modulov: 28,03 € neto za kos 21 – 50 modulov: 26,55 € neto za kos od 51 modulov naprej: 25,08 € neto za kos NAČRTOVANJE Naša prodajna ekipa vam z veseljem pripravi brezplačno ponudbo, prilagojeno vašim željam. PREVOZ IN MONTAŽA Z veseljem vam pomagamo pri prevozu in montaži izdelka. PLAČILNI POGOJI Plačilni pogoji se dogovorijo v primeru oddaje naročila. Cena je izražena kot cena za kos/neto cena oziroma kot je navedeno v opisu izdelka (brez DDV). Seveda boste prejeli račun z navedeno ceno DDV. O NAS Podjetje DLK iz Nordhorna trguje z novimi in rabljenimi izdelki na področju skladiščne logistike, transportne tehnike, skladiščnih podestov, skladiščenja tekstila ter stroji za trgovino, industrijo in obrt. Nenehno vam ponujamo zanimive ponudbe rabljenih izdelkov različnih proizvajalcev/blagovnih znamk po ugodnih pogojih. Če imate vprašanja, nas kontaktirajte. Štirje dobijo – Gradniki uspeha podjetja DLK – skladiščna tehnika | Levelmaker® | logistika | rešitve

Stanje: zelo dobro (rabljeno), Professional height gauge from the renowned Japanese brand Mitutoyo. The device is designed for precise height measurements and scribing on surface plates. Model with a measuring range up to 600 mm, equipped with a dial indicator and precise micrometric adjustment, providing highly accurate dimension control. The robust construction and high manufacturing quality typical of Mitutoyo ensure repeatable and reliable measurements. — Technical data: • Manufacturer: Mitutoyo (Japan) • Measuring range: 600 mm • Mitutoyo dial indicator • Indicator graduation: 2.5 µm • Micrometric fine adjustment • Stable, heavy base • Clear measurement scale — Applications: • Height measurement of workpieces • Scribing on granite surface plates • Dimensional inspection • Workshops, toolrooms, quality control departments — Condition: Used, in good technical condition. Shows normal signs of use. Sold exactly as shown in the photos. — Equipment: • Mitutoyo height gauge • Dial indicator • Micrometric adjustment mechanism Dksdpfx Aoy Dirqek Eot

Stanje: zelo dobro (rabljeno), Professional BERNARDO BS-1 dividing table / indexing head equipped with a high-quality BISON Ø160 mm lathe chuck. The set is intended for milling machines and precise mechanical machining requiring angular division and indexing of workpieces. Technical data: • Indexing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck rotational speed: 3000 rpm • Precise angular scale • Indexing plate with hand crank • Robust cast iron construction • Capable of highly accurate angular divisions Applications: • Polygonal milling • Gear cutting • Machining shafts and rotary components • Drilling holes at a specified angle • Toolroom and production operations Condition: • Used item • Fully complete • Normal signs of use visible in the photos Dkedpfxsza Hido Ak Eot • BISON chuck runs smoothly and clamps workpieces securely • Scales and indexing mechanism are legible and fully functional Set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The exact item shown in the photos is being offered for sale.

Stanje: rabljeno, We offer used shelving units here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Compartment load: 100 kg Number of levels: 6 pcs. Boltless assembly Use: single-sided Djdoy Hqrkspfx Ak Eokt Material: steel, galvanized PRICE €506.50 net (2 starter bays + 8 extension bays) €602.74 gross incl. VAT Tiered prices Starter bays: 1 - 5 units: €70.00 net 6 - 20 units: €66.63 net 21 - 50 units: €63.25 net from 51 units: €59.88 net Extension bays: 1 - 5 units: €50.00 net 6 - 20 units: €47.50 net 21 - 50 units: €45.00 net from 51 units: €42.50 net Large quantities available directly from stock. YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The extra costs depend on delivery location and shipment size and can be requested individually from us. PROJECT PLANNING Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is understood as a unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn deals with new and used products from the fields of warehouse logistics, conveying technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and craft. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The building blocks of DLK’s success – Warehouse Technology | Levelmaker® | Logistics | Solutions

Stanje: rabljeno, We offer here used boltless shelving units. TECHNICAL DATA Manufacturer: FX Rauscher Model: P30 Condition: used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 pcs Boltless assembly Use: single-sided Material: galvanized steel PRICE €270.00 net (1 starter bay + 4 extension bays) €321.30 gross incl. VAT Quantity pricing Starter bays: 1 - 5 pcs: €70.00 net each 6 - 20 pcs: €66.63 net each 21 - 50 pcs: €63.25 net each from 51 pcs: €59.88 net each Dkjdpfoy Hqr Rsx Ak Eot Extension bays: 1 - 5 pcs: €50.00 net each 6 - 20 pcs: €47.50 net each 21 - 50 pcs: €45.00 net each from 51 pcs: €42.50 net each Large quantities available directly from stock. YOUR CONTACTS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment is possible at an additional charge. The extra costs depend on the delivery location and the scope of the shipment and can be requested individually. PROJECT PLANNING Our sales team will gladly prepare a non-binding offer tailored to your requirements. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is quoted per unit/net or as specified in the description (plus VAT). You will of course receive an invoice with indicated VAT. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for commerce, industry, and manufacturing. We constantly offer attractive used equipment from various manufacturers/brands at competitive terms. If you have any questions, please do not hesitate to contact us. Connect Four – The four cornerstones of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Stanje: rabljeno, Leto izdelave: 2003, Valjasta brusilnica Djdpfx Aezy Urlek Eokt Število valjev: 17 Premer: 42 Širina traku: 2.000 mm Minimalna debelina: 0,5 mm Maksimalna debelina: 3 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2004, številka stroja/vozila: 4roll 2000x6 mm, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 155 mm, premer zgornjega valja: 165 mm, premer stranskega valja: 120 mm, premer valja: 165 mm, dolžina valja: 2.050 mm, delovna širina: 2.000 mm, delovna višina: 600 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, maks. debelina pločevine iz nerjavečega jekla: 6 mm, maks. debelina aluminijaste pločevine: 8 mm, maks. debelina medeninaste pločevine: 10 mm, najv. debelina bakrene pločevine: 10 mm, skupna masa: 2.200 kg, skupna dolžina: 3.400 mm, skupna širina: 1.150 mm, skupna višina: 1.100 mm, moč: 2,21 kW (3,00 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 2, Oprema: kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, - stroj za upogibanje pločevin, model DAVI MAX2017, leto izdelave 2004, zmogljivost 2000 x 6 mm rabljeno valjarno za pločevine, v delovnem stanju, planetarni dvojni predhodni stisk Zmogljivost: širina pločevine 2000 mm debelina pločevine 6 mm predhodni upogib 5 mm najmanjši premer upogibanja 350 mm dolžina valjev 2050 mm zgornji valj 165 mm stiskalni valj 155 mm stranski valji 120 mm moč električni motor 3 kW na hidravlični enoti napetost 400/50 Hz Nameščena konfiguracija: površina valjev, utrjena, visoka trdnost stožčasto upogibanje pločevin, upogibanje stožcev hidravlični pogon prek ročic neskončno spremenljiva regulacija hitrosti digitalni prikazovalnik položaja --- hidravlični pogon za centralne valje Dodpfx Akszy N Afe Eekt pritisak predhodnega stiska, nastavljiv za predhodni upogib odprt sprednji del za enostavno praznjenje obdelovancev sistem za ponovno upogibanje za kalibracijo varjenih konstrukcij varnostni in izredni izklop dimenzije stroja 3400x1150xV 1100 mm – teža 2200 kg

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Uporabljena kombinirana strojna oprema FELDER CF 731 S Professional, leto proizvodnje 2000. Kompaktna in vsestranska strojna oprema za obdelavo lesa s formatirno krožno žago, mizo za rezkanje, strigalnikom in debelino. Stroj ima formatirno mizo z dolžino reza približno 2.700 mm in veliko izmerjeno mizo z omejevalnikom za dolžino. Strojalna enota ima 4-rezilno glavo. Vreteno za rezkanje je nastavljivo in ima omejevalnik za rezkanje s zaščitnim pokrovom. Zaradi obsežne opreme je stroj primeren predvsem za mizarstva, delavnice za izdelavo pohištva in manjše delavnice. Tehnični podatki / oprema Proizvajalec: FELDER Tip: CF 731 S Professional Leto proizvodnje: 2000 Številka stroja: 80-02/140-00 Napetost: 400 V Frekvenca: 50 Hz Moč motorja: 4 kW Nazivni tok: 8,6 A Število vrtljajev: približno 3.400 vrt/min Formatirna krožna žaga: Formatirna miza Dolžina reza približno 2.700 mm Izmerjena miza Omejevalnik za dolžino z merilno lestvico in omejevalnim pokrovom Paralelni omejevalnik Nastavljiva žagina enota Nastavitev višine z ročnim kolesom Miza za rezkanje: Nastavljivo vreteno za rezkanje Omejevalnik za rezkanje Zaščitni pokrov za rezkanje Nastavitev višine in kota Priključek za odsesavanje Strigalnik/debelino: 4-rezilna glava Omejevalnik za striganje Strigalna miza, ki se lahko dvigne Strojalna enota za obdelavo debeline Mehanska nastavitev višine Stroj je v uporabljenem stanju z ustreznimi znaki uporabe. Stroj bo pred prodajo pregledan. Pri rabljenih strojih, izdelanih v letu 2009 ali prej, se pri prodaji poslovnim strankam izključi garancija. Transport je možen ob doplačilu! Dedpfszzaw Aex Ak Eokt Tehnični podatki in oprema se lahko razlikujejo. Pridržujemo si pravico do sprememb, napak in medprodaje. Vse informacije so podane brez garancije.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, DN Solutions PUMA 5100MB – NOVO, NEUPORABLJENO STROJ! Letnik 2023 Fanuc Oi-TF 15” Os C – pogon za orodje Nosilec orodja 21 palcev (535 mm) Premer vretena 166 mm Rezalna glava za 12 položajev BMT75 Maksimalni premer obdelovanca: ø 650 mm Maksimalna dolžina obdelovanca: 952 mm Priprava za podporo – vodila Zadnji konic Orodni senzor Izmetalec žagovine CROMAR 12 nosilcev, od tega 4 s pogonom 2/2 Dedpjzpw Dpofx Ak Ejkt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 6.274 h, nosilnost: 4.500 kg, dvižna višina: 6.000 mm, prosto dvigovanje: 2.000 mm, težišče tovora: 600 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.770 mm, proizvajalec motorjev: Kubota, dolžina vilic: 1.300 mm, Tip prednje pnevmatike: superelastične pnevmatike (črne), velikost sprednje pnevmatike: 200/50-10, tip zadnje pnevmatike: superelastične pnevmatike (črne), velikost zadnje pnevmatike: 27x10-12, skupna masa: 6.600 kg, lastna masa: 6.600 kg, skupna višina: 2.770 mm, skupna dolžina: 2.600 mm, skupna širina: 2.320 mm, največja dovoljena obremenitev: 4.500 kg, gorivo: dizel, Oprema: 3. hidravlična funkcija, 4. hidravlična funkcija, CE označba, kabina, klimatska naprava, nastavljiva roka, osvetlitev, vilice za palete, Nova cena 37.900 EUR // Stara cena 39.900 EUR Pozicioner vilic + bočni pomik Klimatska naprava Combilift je v popolnem stanju. Viličarje prodajamo po opravljenem celovitem servisu. Pripravljeni za končnega uporabnika. Pripravljeni za uporabo. Dkodpfx Ajzzdgusk Eet Organiziramo prevoz po Evropi in po celem svetu.