Kk-Industries Cy4R-Hhs 270-25/13 nakup rabljenega (48.453)

Stanje: novo, Bending length: 2100 mm Sheet thickness: 30 mm Top roller diameter: 360 mm Technical data: - Hardened and polished rollers - Complete frame made from ST-52 steel - Conical bending device - Digital display for side rollers - Portable control panel - Rollers mounted with bearings - Upper roller cover, hydraulically openable and lockable via the control panel - All rollers driven by hydraulic motor and planetary gearbox - Side movements operated hydraulically Options: - Variable rotation speed: EUR 4,682 Ksdped Ab S Ejfx Al Nslr - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,060

Stanje: novo, Bending length: 2600 mm Sheet thickness: 4 mm Top roller diameter: 140 mm Sheet length: 2,600 mm Technical Data: - Rear roller driven by motor - Cone bending device Klsdpfxsd Ab Nrs Al Nor - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearbox - Portable control panel - Complies with CE standards Options: - Bottom roll driven by electric motor EURO 1,513 - Digital display for rear roller position EURO 1,010 - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 16 mm Top roll diameter: 330 mm Kjdsd Ab S Ijpfx Al Njlr Technical data: - Hardened and polished rolls - Full frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Upper roll cover, hydraulically openable and lockable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements hydraulically powered Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,400 We have numerous references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 5 mm Upper roller diameter: 170 mm Technical specifications: - Rear roller powered by motor - Cone bending device - Hardened and polished rollers - Entire frame made of St 52 steel - Asymmetric design for perfect bending results - Upper and lower rollers driven by brake motors and planetary gearbox - Portable control panel Kljdpfxsd Ab Nno Al Nor - In compliance with CE standards Options: - Lower roller driven by electric motor: EUR 1,650 - Digital display for rear roller position: EUR 1,010 - Extended rollers: EUR 966 - Profile rollers: EUR 1,190 We have numerous references!

Stanje: novo, Bending length: 4100 mm Sheet thickness: 16 mm Top roll diameter: 390 mm Technical specifications: - Hardened and polished rolls Ksdpfed Ab Svox Al Nslr - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console - Rolls are mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements hydraulically powered Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 12,516 We have numerous references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 20 mm Top roll diameter: 360 mm Technical data: - Hardened and polished rolls - Entire frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls are mounted on bearings - Top roll cover hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements are hydraulically driven Kledpfx Ajd Ab S Aol Njr Options: - Variable rotation speed: EUR 4,682 - Material feed table: on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,400 We have numerous references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 20 mm Top roll diameter: 300 mm Technical specifications: - Hardened and polished rolls - Entire frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Hydraulic upper roll cover, openable and closable via control panel Kodpjd Ab Taofx Al Nslr - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 8,400 We have numerous references!

Stanje: novo, Bending length: 1600 mm Sheet thickness: 8 mm Top roll diameter: 190 mm Technical Specifications: - Hardened and polished rolls - Entire frame made of ST-52 steel Klsdped Ab Tqefx Al Njr - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements hydraulically operated Options: - Variable rotation speed: EUR 4,682 - Material feed table: on request - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 4,580 We have numerous references!

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total installed power: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,000 x 1,700 x 1,800 mm Technical data: - Sheet thickness: 13 mm - Cutting length: 3,200 mm - Cutting angle: 2.0° - Backgauge: motorized, 1,000 mm - Motor power: 18.5 kW - Length: 4,200 mm - Width: 2,050 mm - Height: 2,100 mm - Weight: 11,700 kg Features: - Swing cut design - NC preselection control ELGO P 40 T Touch - With backgauge and adjustable blade gap from the front using the EURO P 40 Touch control - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting line - Foot switch - Blade gap adjustment - Cutting line illumination - Wide support table with ball transfers - Folding finger guard, 1,000 mm - 1 side stop with T-slot - 2 sheet support arms with T-slot - Easy replacement and regrinding of the blades - Adjustable cutting length for efficient processing - Lower blade can be turned 4 times Kjdsd Ab Hmjpfx Al Njlr - Upper blade can be turned 2 times - Qualified customer service - Operating manual in ENGLISH - Machine and equipment in accordance with CE regulations

Stanje: novo, Bending length: 3100 mm Sheet thickness: 40 mm Top roller diameter: 460 mm Technical specifications: - Hardened and polished rollers - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rollers - Portable control panel - Rollers are mounted with bearings - Upper roller cover, hydraulically openable and closable via control panel - All rollers are driven by hydraulic motor and planetary gearbox - Lateral movements are hydraulically powered Options: - Variable rotation speed EURO 5,858 - Material feed table on request - Oil cooler STD. - Central support EURO 18,750 Kljdpfx Aled Ab Sqs Njr - Side supports EURO 15,000 We have numerous references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 8 mm Top roller diameter: 190 mm Technical specifications: - Hardened and polished rollers - Full frame made of ST-52 steel - Conical bending device - Digital display for side rollers - Portable control panel - Rollers mounted with bearings - Top roller cover, hydraulically openable and closeable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Lateral movements powered hydraulically Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 Kljdpsd Ab Tpsfx Al Nsr - Central support EUR 8,250 - Side supports EUR 4,600 We have many references!

Stanje: novo, Sheet thickness: 10 mm Bending length: 3100 mm Top roller diameter: 270 mm Dimensions (L x W x H): 5600 x 1450 x 1600 mm Pre-bending capacity: 8 mm Motor: 11 kW Lower roller diameter: 250 mm Side roller diameter: 210 mm Technical Data: - Hardened and polished rollers - Complete frame made from ST-52 steel - Symmetrical 4-roller arrangement - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers driven by hydraulic system and gearbox - Vertical movement of lower roller hydraulically powered - Mobile control panel - CE-compliant Options: | Description | Quantity | Net price (€) | |-----|-----|-----| | Heating + cooling | 1 | 11,477 | | Infinitely variable speed | 1 | 3,323 | | Material feed table 1000 × 2000 – 1 pc. | 1 | 2,414 | | Central support | 1 | 15,857 | | Preparation for central support | 1 | 1,888 | | Side supports left and right | 1 | 5,020 | | Preparation for side support (instead of standard) | 1 | 1,923 | Kljdod Ab R Sjpfx Al Nor | CNC-CS6 control system | 1 | 18,200 | | NC-CS6 control system | 1 | 7,721 | | Ejection system | 1 | 13,020 |

Stanje: novo, x-axis travel: 4000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump output for flushing: 37 kW Control: Siemens PLC touch screen, direct import of usable DXF files Max. output pressure: 5500 bar Abrasive delivery system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor for monitoring abrasive feed to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is pressurized up to 5500 bar. Depending on the requirements and workpiece, it is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. Since the waterjet process works without heat input, material deformation is avoided. By adding abrasive, waterjet cutting achieves maximum precision with tolerances of +/- 0.01 mm. Our flexible production enables both vertical and bevel cuts. We are happy to receive your custom CAD files. Waterjet technology provides significant advantages for industry, trade, and custom prototyping. It is also environmentally friendly as waterjet cutting operates dust-free and steam-free, while also conserving material. Waterjet cutting: example gallery What already sounds impressive in theory is even more striking in the finished product. We have compiled a selection of images to demonstrate our capabilities in waterjet cutting. Click through our sample gallery to see what is possible with this modern processing technology. Waterjet will find the ideal solution for your application! Advantages - No deformation in the cutting area - Cutting without thermal input - Material saving - High precision: +/- 0.1 mm - Cutting area: x = 4010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and bevel cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, dust- and steam-free We cut everything! All materials shaped, including: - Aluminium - Steel - Brass - Copper & bronze Klsdpfsd Ab Uuex Al Njr - Other precious metals - Glass - Granite & marble - Tiles - composites - Foam material cuts - Rubber - Plastics - Plexiglas Optional: Oil cooler                                                                € 10,725.00 Water filtration system                                              € 1,430.00 Sludge extraction system                                            € 10,725.00 Professional water treatment system                        € 10,725.00 An oil cooler must be present during commissioning!!! Operation for longer than 1 hour is only possible with an oil cooler.

Stanje: novo, Dolžina pločevine: 1360 mm Debelina pločevine: 3 mm Standardna oprema: Klodpfx Aljxx D Efo Nor - NC krmiljenje - Programabilni, motorizirani zadnji prislon z gibom 750 mm - Osvetlitev sence rezalne linije - 1 kos prislona z mersko lestvico - 2 kosa podpornih ročic za pločevino - Zaščita za prste - Kroglična valjčna miza - Enostavna nastavitev reže rezila od spredaj - Kroglično vreteno - Števec rezov - Prenosna nožna pedala z gumbom za izklop v sili - Svetlobna pregrada na zadnjih varnostnih napravah

Stanje: novo, Dolžina pločevine: 3100 Debelina pločevine: 13 Upogibanje: 10 Skupna potrebna moč: 15 Teža približno: 10 Dimenzije (DxŠxV): 4,88x1,16x1,18 Slika podobna Premer valja (zgoraj/spodaj): Ø270 mm Dolžina upogibanja: 3.100 mm Največja debelina pločevine za običajno upogibanje: 13 mm Kedpfx Alsd Ab H Ee Nelr Največja debelina pločevine za pred-upogibanje: 10 mm Pred-upogibanje / Upogibanje: 8 mm / 10 mm (glede na polmer Ød × 1,5) CE-standard Spremenljiva hitrost Krmilna enota – 7-palčni zaslon na dotik Stožčasto upogibanje Induktivno kaljeni valji Pozicioniranje stranskih valjev preko elektronsko sinhroniziranega PLC Spodnji valj trdno mehansko sinhroniziran Varnostni mehanizem za varjenje na stroju Ograja za sprostitev napetosti iz jeklene konstrukcije Ležajni valji Hidravlično odpiranje zgornjega valja Zgornji in spodnji valji poganjani s hidravličnim motorjem in planetnim menjalnikom Električna in hidravlična zaščita pred preobremenitvijo Hidravlično nastavljiv pritisk spodnjih valjev

Stanje: novo, Sheet thickness: 6 mm Bending length: 2550 mm Upper roll diameter: 190 mm Pre-bending: 5 mm Sheet length: 2550 mm Model MRM-S 3-Roll Motorized Asymmetric Plate Bending Machine Steel-welded frame – Motorized adjustment of the rear roll Klodoflvl Ajpfx Al Ner Options: Hardened rolls: €1,800 Extended roll shafts: €500 Segment rolls: €750 Digital display: €800 All prices excl. VAT.

Stanje: novo, Sheet length: 2560 mm; Sheet thickness: 4 mm; Dimensions (LxWxH): 3200 x 2250 x 1400 mm; Motor: 7.5 kW; Weight approx.: 3500 kg Standard equipment: - NC control - Programmable, motorized backgauge with 750 mm travel - Shadow line lighting - 1 stop rail with measuring scale Ksdpfxsgickve Al Njlr - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Easy front-side blade clearance adjustment - Ball screw - Cut counter - Portable foot pedal with emergency stop button - Light barrier on rear safety devices

Stanje: novo, Pressure: 60 Bending length: 2550 mm Distance between housings: 2100 mm Installation height: 550 mm Stroke (max.): 270 mm Throat depth: 450 mm Dimensions (LxWxH): 3220 x 2250 x 2560 mm Weight approx.: 5200 kg Klsdpfx Aod I Annol Ner Motor power: 5.5 kW Standard equipment: KK-Industries has participated in production and is now manufacturing press brakes and guillotine shears based on its own concepts. We have assembled a high-quality model for the European market. The CNC press brake KLETZER Maxima-EUROPA XL, made in Turkey Model: KLETZER Maxima-EUROPA XL The powerful KLETZER Maxima-Europa XL press brake stands out for its high precision, accuracy, and versatile range of applications. The KLETZER Maxima-Europa XL offers a very large installation height and correspondingly large stroke (cylinder travel). The throat depth is also above average, resulting in minimal limitations when handling various workpieces. We insist on quality, which is also reflected in the control system. As the standard control, we have installed a high-quality Italian 10 2 D controller, which is exceptionally easy to program. Additionally, the KLETZER Maxima-Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all operated via the controller. We also make no compromises with the upper tool and die, equipping the KLETZER Maxima-EUROPA XL CNC press brake with premium quality tools from EUROSTAMP Italy or Rolleri Italy. A machine is only as good as its service, which is why we focus on highly qualified personnel with extensive experience in CNC sheet metal processing. CNC axes: Y1, Y2, X Controller: 2D Top tool: 135.75.R08 Bottom tool: 4V 60x60 85° Backgauge with dual linear guides and ball screw drive Motorized crowning device with CNC control 2 heavy duty front support arms, height-adjustable on linear guides Laser safety device on the upper beam CE safety equipment Various options available MAXIMA 2560 TECHNICAL DATA Type: MAXIMA 2560 Bending force (ton): 60 Bending length (mm): 2550 Distance between columns (mm): 2100 Stroke (mm): 270 Daylight (mm): 550 Throat depth (mm): 450 Motor power (kW): 5.5 Approach speed (mm/sec): 140 Bending speed (mm/sec): 10 Return speed (mm/sec): 120 Travel in X axis (mm): 650 Crowning: Manual Height (mm): 2560 Width (mm): 2250 Length (mm): 3220 Weight (kg): approx. 5200 KK-Industries GmbH There is something for everyone!

Stanje: novo, Sheet length: 1360 mm Sheet thickness: 6 mm Dimensions (LxWxH): 2050 x 2250 x 1400 mm Motor: 7.5 kW Kodpfxjgickkj Al Njlr Weight approx.: 2300 kg Standard equipment: - NC control - Programmable, motorized backgauge with 750 mm travel distance - Shadow line lighting - 1 stop rail with measuring scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Easy front adjustment of blade clearance - Ball screw - Stroke counter - Portable foot pedal with emergency stop button - Light barrier at the rear safety devices

Stanje: novo, Dolžina pločevine: 1360 Debelina pločevine: 3 Klsdpfx Aegick Dol Nsr Standardna oprema: - NC krmiljenje - Programabilni motorizirani zadnji prislon z 750 mm hoda - Osvetlitev s senčno linijo - 1 kos prislonske roke z merilno lestvico - 2 kosa podpornih ročic za pločevino - 1 dodaten podporni ročaj za pločevino (pri modelih 1106-1306-1505) - Zaščita za prste - Kroglična miza (Ball Transfer Table) - Enostavna nastavitev reže za rezanje s sprednje strani - Kroglični vreteno - Števec rezov - Prenosno nožno stikalo z izrednim gumbom za zaustavitev - Svetlobna zavesa na zadnjih varovalih

Stanje: novo, Dolžina pločevine: 2560 Debelina pločevine: 2,5 Standardna oprema: NC-krmiljenje Programirno motorizirano zadnje vodilo s hodom 750 mm Osvetlitev sence rezalne črte Kjdpfjgiclaox Al Nolr 1 kos vpenjalne roke z merilno lestvico 2 kosa podpornih roke za pločevino 1 kos dodatne podporne roke (za modele 1106-1306-1505) Zaščita za prste Kroglična miza (Ball Transfer Table) Enostavna nastavitev reže od spredaj Kroglični vreteno Števec rezov Prenosno nožno stikalo z gumbom za zaustavitev v sili Svetlobna pregrada na zadnjih varovalih

Stanje: novo, Bending length: 2050 mm Sheet thickness: 4 mm Top roll diameter: 130 mm Technical data: - Rear roll driven by motor - Conical bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and transmission system - Portable control panel - Cast iron body - Manual adjustment of rear and lower rolls - In accordance with CE standards Options: - Top roll driven by electric motor – EURO 1,260 - Digital display for rear roll position – EURO 1,010 - Hardened rolls – EURO 1,352 - Special voltage – EURO 480 - Material infeed table Kloded Ab Nwepfx Al Nsr - Bottom roll driven by electric motor We have a large number of references!

Stanje: novo, Bending length: 1550 mm Sheet thickness: 4.5 mm Top roll diameter: 130 mm Technical specifications: - Rear roll driven by motor Kjdpfx Aled Ab Nxs Nolr - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron body - Movement of rear and bottom rolls manually operated - In compliance with CE standards Options: - Top roll driven by electric motor, EUR 1,166 - Digital display for rear roll position, EUR 1,010 - Hardened rolls, EUR 1,117 - Special voltage, EUR 480 - Material feed table - Bottom roll driven by electric motor We have numerous references!

Stanje: novo, Bending length: 1050 mm Sheet thickness: 5.5 mm Top roll diameter: 130 mm Technical specifications: - Back roll driven by electric motor - Cone bending device - Hardened and polished rolls - Entire body made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Movable control panel - Cast iron body - Manual adjustment of rear and lower rolls - In compliance with CE standards Options: - Top roll driven by electric motor EURO 1,166 - Digital display for back roll position EURO 1,010 Kedpfx Aljd Ab Nye Nslr - Hardened rolls EURO 799 - Special voltage EURO 480 - Material feed table - Bottom roll driven by electric motor We have numerous references!

Stanje: novo, Pressure: 125Motor: 22Installation height: 500Stroke length (max.): 400Table size: 800 x 600 x 120Ram area: 800 x 600 x 300Table height: 850Dimensions (LxWxH): 1,600 x 2,000 x 3,200Weight approx.: 7,000Oil fill: 400Control / Key switch: 1. Setup mode Manual without light sensor (max. 10 mm/sec. speed) 2. Automatic (at full speed) with light sensor Main cylinder: Ø 220 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Auxiliary guides: 2 pcs Ø 50 mm Motor: 15 kW – 22 hp (IE-3) Pump: 48 liters / ASC Speed: Forward 120 mm/sec – Return 140 mm/sec – Pressure: 13 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 800 x 600 x 120 mm (with T-slots) (customized design possible) Ram plate: 800 x 600 x 300 mm (with T-slots & ribbed welding) Table height: 850 mm (floor to top of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10 – 125 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Ksdpfx Aljmr Hpce Njlr Siemens S7-1200 Main control cabinet Swivelling operator panel Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear scale for setting stroke length 9” PLC screen – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) Double workspace lighting 8 free inputs & outputs on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Two-channel cable protection Operating manual & parts list (German) With lateral safety door (doors slide to the rear)