Homag Kdf 650 (Edgeteq S-380) nakup rabljenega (86.360)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Značka: Homag Typ: Optimat CH 03/32/32/E Plus Serijska št.: 0-341-07-5006 Leto izdelave: 1999 Tehnične informacije: Širina žaganja z vodilom: 3.200 mm Dolžina žaganja: 3.200 mm Višina reza: 50 mm Gsdpfxsvwku Uj Afwoub Glavni žagin list: Ø 300 x 75 mm Predrezni žagin list: Ø 125 x 45 mm Hitrost glavnega žaginega lista: 5.100 min⁻¹ Hitrost predreznega žaginega lista: 5.500 min⁻¹ Pomik programske vozička: 14 m/min Pomik žaginega vozička naprej in nazaj: 6–32 m/min Pomik nazaj: 32 m/min Moč glavnega motorja žage: 5,50 kW Moč motorja predrezne žage: 0,55 kW Obratovalna napetost: 380 V, 50 Hz, 3 faze, 32 A Krmilna napetost: 24 V DC Kakovost tal: min. 5 Kp/cm² Priključni kabel: 5 x 6 mm² 1 fiksna, prevlečena prednja miza 1.750 x 400 mm Zaloga št.: 2002415BXM

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, številka stroja/vozila: 0-200-03-9040, Funkcionalnost: popolnoma funkcionalen, Opis izdelka: Prodajamo dobro vzdrževan, robusten enostranski robilni stroj HOMAG OPTIMAT KAR 310/5/A20/S2. Stroj je znan po svoji zanesljivosti in natančnosti ter je idealna izbira za profesionalna mizarska podjetja, ki potrebujejo kakovostno lepljenje robov pri različnih materialih in debelinah. Proizvajalec: HOMAG Model: OPTIMAT KAR 310/5/A20/S2 Stanje: Odlično delujoč, pripravljen za takojšnjo uporabo. Leto izdelave: 2007 Delovne ure: Trenutno ni mogoče preveriti, ker električni kabel ni priključen. Ključne tehnične specifikacije in lastnosti: Lepilni sistem: FE-MA-TECH Advanced PUR 2 kg, popolnoma obnovljen 10.11.2025, z dvema novima lepilnima lončkoma. Dovodna hitrost: 18 m/min Debelina plošče: 10-60 mm Debelina roba: 0,3 - 20 mm Vključene delovne enote (agregati): Predrezalna/enota za skupno obrezovanje: Za popolno pripravo robu. FE-MA-TECH Advanced PUR 2 kg Cona pritiska: Optimizirana za debelejše robove. Gujdpexvqqpsfx Afwjb Enota za čelno obrezovanje (HL): Natančno obrezovanje začetnega in končnega previsa roba. Enota za fino obrezovanje (MFL): Zgornje in spodnje obrezovanje za ravni ali radij zaključek (nastavitev S2). Profilna postrgalna enota (PN): Odstranjevanje sledi obrezovanja za bolj gladko površino. Polirna/buffing enota (SM): Za popoln, visokosijajni končni videz. Dodatne informacije: Servisna zgodovina: Vsakoletni servis s strani Projecta OY (Estonija), 2023 - Menjava celotnega programske opreme in računalniškega sistema.

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Box On Demand, continuous corrugated cardboard, focus on your CO2 footprint. The machine listed here for processing continuous corrugated cardboard belongs to the series of static operating machines, i.e., all crosswise operations are performed while the cardboard is stationary. The machine is designed for high productivity. The maximum working width for cardboard is 1,500 mm. All tool adjustments are performed automatically. 1) Main machine body (Automatic Carton Cutter): - Linear cross-cutting and cross-creasing unit for head and foot processing on the cardboard - 8 longitudinal creasing and slitting units from above for longitudinal creasing and cutting of the cardboard 2) Dual carton magazines: Gedpfxsyy Iqks Afwoub - 2 carton magazines enable the provision and feed of raw cardboard to the processing machine - Stack height for continuous corrugated cardboard up to max. 2,000 mm possible 3) Control cabinet, controls, electronics: - Contains all components required to operate and control the system - Control cabinet components are based on HOMAG standards.

Stanje: dober (rabljeno), Leto izdelave: 1990, vrsta vhodnega toka: trifazni, KUPER SHRINK TUNNEL DUPLEX Manufacturer: Küper Model: ST/I-1400 Gujdpfx Ajkn Rz Hjfwob Year of manufacture: 1987 Serial number: 594 Working width: 1300 mm Roll holder: Yes Electrical connection: 400 V Overall height: 3500 mm Overall width: 2350 mm Overall depth: 1850 mm Incl. 2 air-blowing units Power: 59 kW Temperature range: 230 °C Continuous conveyor belt Conveyor speed: 5 m/min Duplex 2100/650 film feed station Incl. film holder Swivel arm with chain hoist Sealing bar Length: 2100 mm "Siemens" control panel Overall dimensions: 3000 x 2000 x 2300 mm

Stanje: rabljeno, Leto izdelave: 2003, številka stroja/vozila: KL 77/A20/S2, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 20 m/min, skupna dolžina: 9.000 mm, Oprema: dokumentacija / priročnik, Wij bieden deze gebruikte HOMAG Optimat kL 77/A20/S2 EVENT kantenlijmer, bouwjaar 2003, aan. Fabrikant: HOMAG Model: Optimat kL 77/A20/S2 EVENT Bouwjaar: 2003 Toestand: gebruikt Type machine: kantenlijmer De machine wordt verkocht vanwege de aanschaf van een nieuwe. Ze is momenteel nog in bedrijf en volledig functioneel. Een zeer solide machine met retoursysteem inbegrepen. Altijd stabiel en levert een perfecte afwerking! Uitrusting: - Nozzles / lijmsproeiers - Formaatfrezen, diameter 100 mm - Blaasunit Guodpfx Afsyw N Apowjb - Voorverwarmingsunit - PUR-lijmsysteem met patroonte verwarming - 7 drukrollen - Afkortzagen, recht en in verstek - Boven- en ondervoegfrezen - Profielkopfrezen R1/R2 mm - Profiel-/vlakscharen - Nozzles / lijmsproeiers - Polijstborstels - Machine is voorzien van boven- en onderbandtransport (zeer stabiel) - Voorzijde in hoogte verstelbaar (automatisch) - Profielkopfrezen automatisch verstelbaar via het programma - Afkortzagen automatisch ingesteld - Alle functies zijn bedienbaar via het frontpaneel - Retoursysteem bestuurd via de pc -> Demo mogelijk bij interesse! Prijs op aanvraag via privébericht. Neem gerust contact op bij vragen of voor meer informatie. If you have any questions or require further information, please feel free to send us a message or call us.

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 0-200-03-8334, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 24 m/min, model krmilnika: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Gusdpfxeydiyme Afweb Fuse: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Working height electronically adjustable via CNC Motorized rubberized pressure belt Panel support guide Side roller conveyor with free-running rollers for panel support Sanding unit Lamps for preheating panel edge 6-position coil holder magazine with automatic edge change via CNC Gluing unit for EVA hot-melt adhesive with premelter and glue pot Pressure station for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 motors and automatic tilt adjustment Overlapping trimming/milling unit with 2 motors Adhesive/milling unit with 2 tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (scraper + rounding) with numerical control, automatic adjustment Space reserved for possible installation of an additional working unit Edge scraping unit Oscillating brush unit

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Mera reza 3.200 x 3.200 mm Maksimalna višina reza 50 mm Glavni motor žage 5,5 kW Premer glavnega žaginega lista 300 mm Predrezalni motor 1,1 kW Premer predrezalnega lista 150 mm Gjdpfx Asyba Shofwsub Podajanje vozička žage nastavljivo 6 - 32 m/min Podajanje programskega drsnika 18 m/min Število vpenjalnih klešč: 6 kos Število zračnih miz: 3 kos Ročna naprava za vračanje pod kotom za reze širine 100 - 1.250 mm PC krmiljenje na osnovi Windows 2000

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED FORMATTING AND EDGE BANDING LINE (also "SOFTFORMING") with automatic conveying equipment. For panel thicknesses up to 100 mm. Comprising the following machines: W05025A) Loading Unit (Portal) "MAHROS" Model Brush W05025B) Double-sided Formatting and Edge Banding Machine "HOMAG" Model KFL 620/23/QE/30 (softforming) FORMATTING SECTION (for each side): Jointing milling unit (2 x 6.6 kW) Free space Left only: 2 x Universal milling units (rotatable) (2 x 6.6 kW) EDGE BANDING SECTION (for each side): Gluing unit (Hot melt adhesive + pre-melter) Edge magazine for rolls (compartment no. 1) Edge pressure zone for both STRAIGHT and SOFTFORMING End-trimming unit WK14 (2 x 0.8 kW) Guedpjtt Dqpefx Afwsb Milling unit (2 x 0.55 kW) Profile milling (copying) unit FF 12 (4 motors) WD70 Profile scraper unit PN20 Finishing unit (flat scraper + smoothing unit) FA11 W05025C) Stacking Unit (Portal) "MAHROS" Model Brush

Stanje: zelo dobro (rabljeno), Portal machine Movable table (workpiece), movable working head (horizontal workpiece) Control: Power Control, WoodWOP software Workpiece drive with no. 3 transport belts Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 50 Chip conveyor belt Total connected load (kW): 60 WORKING UNITS (VERTICAL): Drilling units with vertical spindles: No. 6 Independent vertical drilling spindles: No. 40 x 6 (total No. 240) Drill head power: No. 6 x 2.7 kW WORKING UNITS (HORIZONTAL): Godpfedg Itnex Afweub Drilling units with horizontal spindles: No. 4 (4 x 2.7 kW) Horizontal drilling spindles - right side: No. 13 x 2 (total No. 26) Horizontal drilling spindles - left side: No. 13 x 2 (total No. 26) High-pressure glue injection and dowel insertion nozzles (right side): No. 8 High-pressure glue injection and dowel insertion nozzles (left side): No. 8 Dowel magazine for automatic dowel feeding: No. 2

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE “SOFTFORMING” - Min/max edge thickness (roll material) mm: 0.3 - 3 - Min/max edge thickness (strips) mm: 0.4 - 12 - Min/max workpiece thickness mm: 12-60 - Control: Power Control PC 22 Guedpfx Asfd Ilyjfwob - Feed speed (variable) m/min: 12 - 24 - Top pressure with a motorized timing belt - Gluing unit (hot melt adhesives and pre-melter): QE 34 / E12 - Pressure roller track (revolver) for flat and contoured panels (softforming) - Single roll magazine - End cutting unit HL 84 (2 x 0.84 kW – 12,000 rpm) - Fine trimming unit (2 x 1.5 kW – 12,000 rpm) - Milling unit (2 x 0.4 kW – 12,000 rpm) OPTIONAL: Feeding system with longer infeed and 3-wheel motorized rubber top pressure

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control Power Control 22 Feed speed m/min 18 Top pressure driven by V-belt Sprayer unit (for liquid anti-adhesive) Adjustable stop ruler CNC controlled Jointing milling unit 2 x Kw 3 Bonding unit (P.U.R. adhesive + pre-melter) QA 34 + PU 34 Edge pressure zone (CNC controlled) "A" Edge magazine for rolls (compartment No. 12) Gusdpfxed Nt Nqo Afweb End trimming unit HL 84 (2 x Kw 0.22) pneumatic (2 pos.) Pre-milling unit Optimat (2 x Kw 0.55) Multifunction unit (radius milling and profile milling) FK 13 (2 x Kw 0.4) CNC (8+8) Multi-profile scraping unit (CNC controlled) MN 21 Finishing unit (flat scrapers + smoothing unit) FA 11 (pneumatic) OPTION: Return conveyor "LIGMATECH" Mod. ZHR 05 (SOFIT code: Z02007)

Stanje: generalkompletno obnovljen (rabljeno), PC control type Power Control Professional Software: woodWOP / TopDrill BST No. 2 throughfeed motorized conveyor belts (4 x kW [?]) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 Gsdpfodz Uk Tjx Afwoub No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 Gujdpfx Afedt Rgvewjb VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 Gedpfxjgwbbqo Afweub No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), Complete factory for the production of furniture, consisting of: KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel insertion machine "BIESSE" SDT CN, loading station "RBO" Tornado Gusdpfeh T Dvtjx Afweb KZ2205) Four-side sizing and edge banding line "HOMAG", consisting of: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° rotation transfer (longitudinal/transversal) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° rotation transfer (transversal/longitudinal) "ESSE2", double loading stations "ESSE2" KZ2210) 'BREMA (BIESSE)' model Vektor CNC LINE drilling-milling-inserting, consisting of: Hedgehog loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfers KZ2090) Sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge banding magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with stacking infeed "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with throughfeed carcass press KZ2203) Sawing line "SALVADOR" (panel crosscut + splitter) with stacking "ESSE2" KZ2009) Veneer department (double knife veneer bundle guillotine "MONGUZZI", cross-cut shears "MONGUZZI"; splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate KZ2215) Automatic panel storage system "ESSE2" model MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, delivery vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, adhesive applicators, etc.), extraction system, roller conveyors, racking (wall-mounted), forklifts, pallet trucks, and more. Machines are still installed at the user's site and can be inspected by arrangement.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, CNC Flexible Gantry Machine Horizontal Throughfeed Table Control System: Power Contro Open powerTouch, Software: WoodWOP (TAPIO Ready) Infeed Table (panel support) + Outfeed Table (panel support) Panel feed via 3 transport belts Min. workpiece dimensions (X-Y-Z): 250 x 100 x 12 mm Max. workpiece dimensions (X-Y-Z): 2500 x 1050 x 60 mm Special lateral guiding system for workpieces with "sensitive" edges 3 upper vertical pressure devices Powered conveyor belt for waste disposal Gsdsx Aqi Ejpfx Afwoub Integrated electrical and control cabinet Total installed power: approx. 47 kW OPTIONAL: Wireless barcode scanner 2 WORKING UNITS (TOP) – (SERVO MOTOR for X-Y-Z axis): 4 V15 drilling heads (4 x 2.3 kW) each with 15 vertical spindles (total of 60 upper spindles) 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR for X-Y-Z axis): 6 V32 drilling heads (6 x 2.3 kW) each with 32 vertical spindles (total of 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 H21 drilling heads (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, PLATTENAUFTEILSÄGE WINKELANLAGE Steuerung PowerControl V2.1 - CADmatic 5 (Tapio ready) Gsdpfex Aqdcox Afwoub Angetriebene Rollenbahnen mm 2200 x 4500 ca. Hubtisch (mm) 4300 x 2200 1° Einschiebersäge mit Nr. 4 Spannzangen 1° Plattenaufteilsäge Max. Schnittbreite (mm) 4300 Max. Sägeblattüberstand (mm) 125 Vorritzsäge (max. Sägeblattdurchmesser / Leistung) mm 180 (Kw 2,2) Hauptsäge (Sägeblattdurchmesser max / Leistung) mm 450 (420) Kw 18 Regelbarer Sägewagenvorschub (m/min) 1 - 130 2° Einschiebersäge mit Nr. 8 Spannzangen 2° Plattenaufteilsäge Max. Schnittbreite (mm) 2200 Max. Sägeblattüberstand (mm) 125 Vorritzsäge (max. Sägeblattdurchmesser / Leistung) mm 180 (Kw 2,2) Hauptsäge (Sägeblattdurchmesser max / Leistung) mm 450 (420) Kw 18 Regelbarer Sägewagenvorschub (m/min) 1 - 130 Nr. 2 vordere Luftkissentische (2 x mm 800 x 2810) Gesamtanschlusswert A 102 OPTION: Nr. 1 Schrottschleifer

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Gjdpfxjh Ryhne Afweub Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in one line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 0.4 - 12 Panel thickness (min/max) mm: 8 - 100 Working width (min/max) mm: 240 - 3000 Control system: Power Control PC22 (Windows XP) Software woodCommander Feed speed (adjustable) (m/min): 10 - 40 Safety and sound-insulation cabins Retractable positioning stops, distance (mm): 400 FORMAT PROCESSING (for each side): Jointing milling unit (2 x 6.6 kW) Open space Left side only: 2 x universal milling units (rotatable) (2 x 6.6 kW) EDGE BANDING SECTION (for each side): Gluing unit (Hot Melt glue + premelter) E34 Godpfxstt Iudo Afwoub Pressure roller track (revolver type) for straight and shaped (softforming) edges, GL sextuple Edge magazine for coils (1 slot) End trimming unit WK14 (2 x 0.8 kW) 25 m/min (0°-30°) Milling unit (2 x 0.55 kW) 0°-30° Contour copying unit (tracing) FF12 (4 motors) WD70 20 m/min Profile scraping unit PN20 Finishing unit (flat scraper + buffing unit) FA11

Stanje: generalkompletno obnovljen (rabljeno), PC control (Power Control) Software No. 2 motorised through-feed conveyor belts No. 2 horizontal drilling supports (digital display of the position data for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Guedpfovhcbzjx Afwjb Maximum working width (mm): 3000 Minimum working width (mm): 250 No. 6 lower vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower drilling supports No. 2 upper vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the upper drilling supports No. 6 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 50 / 60 (approx.)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) max. working width 2500 mm, with automatic high-speed handling system: A) DOUBLE-SIDED LOADING STATION (with 2 loading positions) BARGSTEDT TBH 270/D/25/12 B) TRANSFER TURNER (longitudinal/transverse), "HOMAG" TDL /310 /25 /12 C) Double-sided sizing and edge banding machine HOMAG Model KFL526/9/A3/25 D) TRANSFER TURNER (transverse/longitudinal), "HOMAG" TDL 510/25/12 E) DOUBLE-SIDED UNLOADING STATION (with 2 unloading positions) BARGSTEDT TSH 270/D/25/12 Gsdpfx Aernrrbefwoub With LINE CONTROL - WOODLINE CONTROL PC52

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING AND FORMATTING MACHINE (LEFT) “SOFTFORMING” Edge material (rolls) thickness (min/max) mm 0.4 / 3 Panel thickness (min/max) mm 8 / 60 Control/software: PC 22 / WoodCommander Feed speed (adjustable) m/min 10 - 40 Side adjustment of aggregate carrier, manual mm 30 - 80 Gujdpfxjt N H Tae Afwsb FORMATTING SECTION: Spray unit (for liquid non-stick agent) Double milling unit KD 10 (2 x 6.6 kW) Milling unit for softforming (2 x 1.85 kW) 0°-20° Sanding belt unit for straight edge KS 10 (mm 120 x 2100) Clearance (mm 700) EDGE BANDING SECTION: Gluing unit (hot melt adhesive + pre-melter) E34 softforming Pressure roller conveyor G (revolver with 4 positions) for straight and shaped (softforming) edges with upper-lower cutters (In-Lay) Edge magazine for rolls E3 (compartment No. 6) End trimming unit HL 84 (2 x 0.8 kW) 0°-30° (max 25 m/min) 1st milling unit (2 x 0.55 kW) 0°-30° (pneumatic adjustment) 2nd milling unit (2 x 0.55 kW) 0°-30° (pneumatic adjustment) Universal milling unit for grooving/rebating and profiling UF11 (1 x 4 kW) 0°-90° Profile scraper unit PN20 (pneumatic) Finishing unit (flat scrapers + polishing unit) FA11

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: O06027A) Infeed station with double pick-up station "BARGSTEDT" Model TBH 250/D/25/12 O06027B) 1st double-sided sizing and edge banding machine "HOMAG" Model KFL 525/6/A3/15 O06027C) L-shaped connecting roller conveyor "HOMAG" Model TWL 310 / 25 / 12 O06027D) 2nd double-sided sizing and edge banding machine "HOMAG" Model KFL 526/9/A3/25 O06027E) Connecting roller conveyor "HOMAG" Model TBL 100 / 25 / 25 O06027F) Transfer system (on rails) "HOMAG" Model TWL 120 / 30 / 02 SS Gujdpfxowxvdcs Afwob O06027G) Transfer system (on rails) "HOMAG" Model TWL 120 / 34 / 02 S O06027H) Outfeed station with double storage station "BARGSTEDT" Model TSP 410/D/25/12

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 Guodpsivawpefx Afwjb No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20

Stanje: zelo dobro (rabljeno), Double-Sided Edge Banding Machine - Edge Thickness (coil) (min/max) mm: 0.3 - 3 - Workpiece Thickness (panel) min./max. mm: 12 - 40 - Working Width (min./max.) mm: 250 - 2500 - PC Control: PC22 - Top Pressure System with Driven Rubber Belts - Adjustable Fence Linear Feed Rate m/min: 10 - 32 - Liquid Glue Unit - Jointing Milling Unit (vertical milling machine): 2x 4 kW at 9000 rpm - Quickmelt Hot Melt Adhesive Unit A3 - Pressure Zone C (manual adjustment) "A" - Coil Holders for 2 Rolls - End Trimming Unit: HL 84 (2x 0.22 kW at 12000 rpm) - Premilling Unit (2x 0.4 kW at 12000 rpm) - Finishing Unit (Flat Scraper Unit + Buffing Unit): FA11 Gujdpewk Hp Tjfx Afwjb - Polishing Unit