Farrag Tech Gmbh Periferna Naprava nakup rabljenega (74.582)

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WT 1104, skupna višina: 3.421 mm, skupna širina: 4.704 mm, skupna dolžina: 9.550 mm, nosilnost: 200 kg, gradbena višina: 3.421 mm, Vacuum Turning Gantry for Panels The turning unit offers two different "automatic" operating modes: I. Transfer without rotation The panel is shifted sideways, aligned to the reference edge (zero line) of the machining center, and indexed further to the machining center (BAZ). II. Transfer with rotation The panel is shifted sideways and rotated along its longitudinal axis before being indexed to the machining center (BAZ). Each function can also be operated manually in "hand" mode. SPECIFICATIONS: Maximum panel size: L x W x H: 8000mm x 2500mm x 100mm Maximum weight: 200kg Minimum panel size: L x W x H: 1500mm x 1500mm x 12mm The turning gantry is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the elements. The elements are always picked up using vacuum and then either transferred horizontally to the zero line of the machining center or additionally rotated by 180° while in transit before being placed at the reference edge. Rotation is monitored via absolute encoders; cross-travel positioning is controlled by adjustable photoelectric sensors. Vacuum is generated by a blower. Hfedpfx Asyta R Uolfjg The roller table, measuring 8500 mm x 4300 mm (width), with roller diameter Ø 108 mm, is fitted with material-friendly rubber rings; it is powered by a SEW geared motor. The roller table is controlled via a frequency inverter, speed v=45 m/min, freely adjustable. GENERAL INFORMATION: The entire area is fenced off, with two sliding doors securing the longitudinal side of the system. The doors are monitored for safety. The operator panel with a 12" touchscreen is installed in the fenced area. The installed PLC S7-1500 is programmed with three operational levels: • Automatic mode • Manual mode • Maintenance mode Input signals, feed side: - Start roller table - Turn yes/no - Emergency stop (entire system) Input signals, discharge side: - Start roller table - Emergency stop (entire system) Output signals, system: - Emergency stop (entire system) - Part received

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 7.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DRI 04320080, prevoženi kilometri: 100 km, skupna masa: 7.000 kg, vrsta goriva: dizel, barva: modra, obratovalna teža: 14.000 kg, največja dovoljena obremenitev: 15.000 kg, stanje verige: 50 odstotek, Premer palice (maks.): 61 mm, Premer cevi (maks.): 400 mm, Oprema: gumene gosenice, hidravlično kladivo, kabina, German horizontal drilling rig for boreholes up to 200 meters in length, with a thrust/clamping force of 15 tons plus percussion (28 tons) from a hydraulic hammer. Rubber tracks, maximum speed 3 km/h. Suitable for installation of pipes up to Ø 400 mm underground. Drilling depth up to 5 meters with wireless navigation. Manufacturer: TRACTO-TECHNIK GmbH & Co, Year: 2004, 7,800 operating hours. Main components and assemblies: - Hydraulic-driven carriage for rods, HATZ 4-cylinder diesel engine, operator cabin - 3 rod boxes (each box contains 48 rods x 3 m) = 144 rods (432 meters) Operating options: 1. Rod manipulator for automated rod handling 2. Semi-automatic rod clamping/pulling system Mixing unit (8056D) with hydraulic powerpack (TT-M2), DRI 8904.B DEUTZ 4-cylinder diesel engine, bentonite pump R-72, two bentonite preparation tanks of 4,000 liters each, two BÖRGER rotary pumps for mixing Connecting cable to mixing unit Bentonite hose reel 2 drilling heads Ø110 reamer, 5t swivel Hedpfx Ajy H H Uuslfofg Reamers Ø280 with swivel, Ø315 with swivel, Ø385 with swivel Eclipse navigation system New spare working components (adapter, shaft, bushing) Price incl. VAT.

Leto izdelave: 2018, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Ponujamo ta razstavni stroj SM Innotech Laminator Incapcell 35-18, letnik 2018. Proizvajalec: SM Innotech GmbH & Co.KG Hfsdpfx Aoy Druuelfjg Model: Incapcell 35-18 Letnik izdelave: 2018 Stanje: razstavni stroj ID kategorije: 33 Vrsta stroja: laminator Na voljo sta 2 kosa tega stroja, oba sta nova, saj še nikoli nista bila v uporabi. Če imate vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Leto izdelave: 2019, stanje: rabljeno, Ponujamo ta rabljeni laminator SM Innotech GmbH & Co.KG Incapcell 22-18, letnik 2019. Naprava ima zelo malo obratovalnih ur, saj je bila uporabljena kot poskusni stroj za testne namene. Posamične posodobitve programske opreme ali druge spremembe so možne po dogovoru. Naprava je na voljo takoj. Hfedpfx Ajy Dq D Iolfeg Če imate vprašanja ali potrebujete več informacij, nam prosim pišite ali nas pokličite.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Fully Automatic Bagging Plant – Completely Dismantled and Ready for Collection For sale is a fully automatic bagging plant, suitable for a wide range of bulk materials such as flour, pellets, and granulates. The system impresses with its high degree of automation and robust industrial construction. Equipment and Components: - Pneumatic bagging device - Fully automatic sewing machine for closing bags - Rollers for flattening filled bags - Roller conveyors for in-plant transport - Robotic arm for automatic palletizing of the bags - Automatic pallet magazine - All electrical cables and control cabinets professionally dismantled The entire plant has already been dismantled, is neatly stored on pallets, and is immediately ready for collection. Complete electrical documentation with schematics is available. Hfodeyw Rffepfx Alfjg Special Features: Ideal for industrial applications with high throughput and automated processes. All components are perfectly matched, ensuring an efficient packaging and palletizing process. If you are interested or need further information, we are happy to assist you.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, nosilnost: 10.800 kg, nosilnost na odsek shranjevanja: 2.790 kg, višina okvirja: 3.750 mm, gradbena širina: 1.000 mm, Good day, We hereby offer you, without obligation, a used pallet rack warehouse (multi-position system) from the manufacturer Galler, type OMEGA. Manufacturer: Galler Lager- und Regaltechnik GmbH Type: Omega Year of manufacture: unknown Frame load capacity: max. 10,800 kg Shelf load capacity per level: max. 2,790 kg Frame height: 3,750 mm Frame depth: 1,000 mm Beam length (crossbeam length): 3,100 and 3,400 mm Scope of delivery: 44 pcs. uprights 3,750 x 1,000 x 100 mm (H x D x W) 215 pcs. beams 3,100 mm 14 pcs. beams 3,400 mm 14 pcs. upright impact protection elements, long 985 x 120 x 55 mm (L x W x H) 10 pcs. upright impact protection elements, short 500 x 120 x 50 mm (L x W x H) 12 pcs. floor impact protection corners, green, 500 x 120 mm 13 pcs. floor impact protection corners, yellow, 450 x 110 mm 1 pc. floor impact protection corner, yellow, 450 x 180 mm 2 pcs. upright impact protection for double rows, plate 300 x 250 mm, upright height 350 mm 24 pcs. frame load distributors 1020 x 110 x 45 mm 60 pcs. frame base plates, as new 21 pcs. frame base plates, used, good condition 10 pcs. mesh shelves for beams, galvanized, 2900 x 1020 x 40 mm 19 pcs. mesh shelves for beams, galvanized, 2625 x 1020 x 40 mm Various smaller pieces of mesh shelves for beams, galvanized 1 lot of spacer plates for OMEGA crossbeam feet 1 pallet of frame connection profiles, 900 x 30 x 24 mm Note: Hjdpfx Aleyz A Sxjfefg The above technical data were taken from the operating manual, manufacturer’s brochures or other sources. We cannot guarantee the accuracy or completeness of this information. We would be pleased if this pallet rack warehouse is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.500 kg, Good day, We are pleased to offer you, without obligation, a used, complete pallet racking warehouse (multi-position system) from Galler, type OMEGA. Manufacturer: Galler Lager- u. Regaltechnik GmbH Type: Omega Year of manufacture: 2021 Bay width: 2,700 mm Shelf load capacity: 1,500 kg Bay load capacity: 1,500 kg Brace length: 1,850 mm Frame height: 3,600 mm Max. running length: approx. 179 linear meters Scope of supply: - 64 uprights, 3600 x 1100 x 100 mm (H x D x W) - 100 beams, 2700 x 100 x 70 mm (L x H x W) Hfsdpfxoyz A Itj Alfjg - 2 beams, 1850 x 100 x 70 mm (L x H x W) - 16 collision protection elements for single-row racking, 1230 x 240 x 400 mm (L x W x H) - 2 collision protection elements for double-row racking, 2600 x 240 x 400 mm (L x W x H) - 22 push-through protection mesh elements, 3600 x 1100 x 100 mm (H x D x W) Note: The above technical data was taken from the operating manual, manufacturer’s brochures, or other sources, for the accuracy and completeness of which we cannot assume any liability. We would be pleased if this pallet racking warehouse is of interest to you. Yours faithfully, The Service Team Mertens & Frowein GmbH

Stanje: novo, Leto izdelave: 2025, Horizontal Cartoner 60-ECO – Compact, Powerful, and Flexible Lack of space is a common issue in the food industry – our BASIS 50-ECO horizontal cartoner offers a compact and high-performance solution! This machine has been specifically developed to efficiently process a wide range of folding carton sizes in the smallest possible footprint. With a base length of just 2,284 mm (extendable depending on desired conveyor length), it achieves an output of up to 60 folding cartons per minute. Technical Highlights: Adjustable Product Infeed: The infeed conveyor can be customized upon request. Automatic Product Indexing: We can design and fully integrate an automatic product indexing system. Packaging Range: Handles folding cartons up to 220 mm length (A), 120 mm width (B), and 400 mm height (H). Proven Technology for Maximum Reliability: Control: Siemens PLC system Drive: Siemens servo drives for precise motion sequences Hfjdpfx Alomftm Nofog Adhesive Technology: Nordson hot melt system for clean and secure sealing In addition, we offer a comprehensive portfolio of vertical and horizontal cartoning machines as well as flow wrapping machines. All machines are manufactured in Germany or by our European partners. You are welcome to visit our factory, view the equipment, and test with your own products.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, laserska moč: 30 W, vrsta hlajenja: zrak, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, The LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is a universally applicable, high-performance marking solution designed for industrial applications. It is suitable for precise and permanent marking of a wide range of materials including metals such as steel, aluminum, and hard metals, as well as plastics. The integration of a fiber laser ensures high marking quality while keeping maintenance requirements to a minimum. The system can be configured with fiber lasers in power classes of 20 W, 30 W, or 50 W, enabling optimal adaptation to different requirements concerning material type, marking depth, and cycle time. In many industrial sectors, the use of this technology is indispensable due to the durability and abrasion resistance of the markings. The included laser software allows the creation and positioning of content such as texts, numbering, 2D codes (e.g., DataMatrix), QR codes, and logos. Automatic serialization logic enables the generation of consecutive serial numbers without manual intervention. Additionally, the software supports importing and processing of external data sources (e.g., Excel spreadsheets) for variable contents like drawing numbers or project names. Integration of a hand scanner for data capture is optionally available. By default, the LAS 28 XLe is delivered with an integrated industrial PC (Windows-based) and fully installed laser software. Various options are available to expand its functionality, including a rotary axis (3-jaw chuck) for marking cylindrical components, side arms for processing long parts, a motorized Z-axis, and modular drawer systems for part feeding. Made in Germany Fiber laser: 30 W, 20 W, or 50 W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (optionally larger) • Signal tower for operating status display • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (incl. activated carbon filter) • Optional: Digital height measurement system • Optional: Autofocus system – automatic focus distance determination • Optional: Side arms for large components (single or double-sided) • Optional: Programmable X, Y, and Z axes (software controlled) • EZCAD marking software (German/English) • Pilot laser (easy preview, plain text preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard shelf • Aluminium profile frame • Air-cooled Hjdpswkpx Rjfx Alfofg • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder: approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, valovna dolžina laserja: 1.064 nm, The LAS 22 is a compact desktop unit with a small working area, ideal for marking small components. Thanks to its compact design, the system is extremely user-friendly and can be used virtually anywhere. The universally applicable LAS 22 laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20 or 30-watt fiber laser. In many industries, laser marking is essential for permanent markings. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without requiring extensive programming knowledge. The software can automatically increment serial and article numbers after initial configuration. Moreover, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Using a hand scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optional: 20 watt) - Laser class 1 - Wavelength: 1064 nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview, contour preview) - Focus finder (simple focusing) - Max. workpiece height approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230 V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg Hedpfeuy H Nqsx Alfofg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Semi-automatic Depaneling / Base Machine with Parallel Shuttle The dynamic depaneling machine LOW 4322 XL is specifically designed for medium to high product volumes and meets increasing demands in the production process. PCB panels of various material types are separated using low-dust and low-stress sawing and milling technologies, ensuring maximum product flexibility, precision, and throughput. Highly dynamic linear motor axes, tooling, and grippers satisfy the highest quality standards and guarantee long service life and reliability for the depaneling solution. Semi-automatic Depaneling – Solutions on Demand The LOW 4322 XL depaneling machine allows for rapid product changeover while maintaining short separation and handling times. Panelized PCBs are loaded via a parallel shuttle, clamped using pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measuring system • Dual loading module configured as a parallel shuttle, separated left and right with sliding doors • Steel welded frame with two maintenance doors – left and right. ESD • Standard vision system base module for teach-in programming • Working area: 520 x 480 mm • Automatic milling cutter length processing • Remote maintenance/support via remote connection • Touch IPC with Windows 10 Pro operating system • Laser axis measurement including protocol • Air ionization • Milling cutter breakage monitoring (shaft milling cutters only) • Prepared for vacuum clamping technology • ESD powder coating, RAL 9002, including window and sliding doors Hodpfxevuw R Rs Alfofg An optional dust extraction unit can be offered retrospectively.

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LAS 23 mit integrierter Absaugung, The LAS 23 portable is a compact and mobile fiber laser designed for flexible direct marking of a wide range of workpieces directly at the site of use. Thanks to its wheeled base frame, the system can be deployed independently of location and can easily be moved to hard-to-reach or large-volume workpieces. This makes it particularly suitable for applications where a stationary laser cell is not practical. The modular design with custom-made attachments allows for quick, tool-free adaptation to different workpiece geometries. The quick-change system enables fast replacement of attachments – ideal for varying marking tasks in production and maintenance. The integrated laser software supports the creation of texts, numbering, 2D codes (e.g., DataMatrix, QR codes), and graphic elements (e.g., logos) through a user-friendly interface that requires no programming knowledge. Serial and part numbers can be automatically incremented. Additionally, there is the option to import variable data – such as drawing numbers or project designations – from external tables (e.g., CSV/Excel files) and automatically integrate them into the marking template. An optional hand scanner can be connected for fast data capture, reducing manual input and increasing process reliability. Made in Germany • Fiber laser 20W (optional 30W, 50W) • Laser class 1 • CE-compliant, according to EU directives • Wavelength 1064nm • Marking area 70x70mm (optional: 110x110mm) • Signal light for indicating operating status on the hand unit • Marking software EZCAD (other software options available) • 230V connection • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg Hfsdsvyc Rmspfx Alfjg • Weight of the portable laser unit: 2.8 kg • Fiber optic cable approx. 2.50 m • Integrated extraction system

Leto izdelave: 2025, obratovalne ure: 2 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos quickly and easily, without extensive programming knowledge. The software can automatically increment serial and article numbers after configuration. Additionally, the software is capable of extracting data (such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. A handheld scanner can also be used. Standard equipment includes a laptop with mount, Windows operating system, and laser software. Optionally, the LAS 28 XL can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, a movable Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm Hfodpfx Alsqfcviofsg • Marking field size 150x150mm (larger sizes optional) • Marking software EZCAD (German/English) • Signal light to indicate operating status • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: extension arms for large components (one-sided or double-sided) • Optional: autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Maximum component height approx. 300mm • Electrically adjustable Z-axis • Laptop with mount and Windows OS • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Leto izdelave: 2018, obratovalne ure: 100 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, HI magnetic drum Type KHP 500x1500 9 Operating voltage 3x400 V Frequency 50 Hz Rated operating current 18.70 A Operating speed 30 - 90 rpm Hfjdpfjlhqbrox Alfjg Maximum sound pressure level 50 dB Machine weight 850 kg Location Austria Available immediately

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Nadpásni magnet Tip UB 600 Obratovalna napetost 3x400 V Frekvenca 50 Hz Nazivni delovni tok 5 A Obratovalna hitrost 30–90 vrt./min Hedpfxsxy Hl De Alfefg Najvišja raven zvočnega tlaka 50 dB Teža stroja 750 kg Lokacija Avstrija Na voljo takoj

Stanje: rabljeno, Extraction system, central extraction unit, ambient air filtration system ETS Efficient Technical Solutions GmbH Central welding fume extraction Year of manufacture: approx. 2005 Airflow volume: approx. 5000 m³/h Extraction inlet at filter: 1200 x 150 mm Exhaust outlet at filter: 400 x 300 mm Motor power: 10 kW Power supply: 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance hatch for filter replacement - Radial fan mounted on top of the unit Required space (L x W x H): 2000 x 1650 x 3650 mm Transport height without fan: 3100 mm Weight: approx. 2000 kg Very good condition Hsdpfx Aoicic Helfofg

Stanje: rabljeno, Rotary indexing table with 16 stations Rotary indexing automation + TOX hydraulic press Special-purpose rotary indexing machine with multiple assembly stations Production and assembly line utilizing rotary indexing process Manufactured by special-purpose machine builder 'AKE-technologies GmbH' Serial number: Order number: 11111 Year of manufacture: 2012 - Large WEISS rotary indexing table, type TC500, with 16 stations - Pressing station with TOX powerpackage - Vibratory feeders - Conveyor belts - Testing/inspection stations - Some stations visible in the pictures have already been dismantled Required floor space (L x W x H): approx. 3500 x 2750 x 2300 mm Net weight: approx. 3000 kg Everything in as-new condition – the system has never been used in series production. Hsdpfxogd D U Es Alfefg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, obratovalne ure: 27.000 h, Funkcionalnost: popolnoma funkcionalen, Rabljena kogeneracijska enota (CHP) Proizvajalec: 2G Energietechnik GmbH Model: G4076 Motor: MAN plinski motor Električna moč: pribl. 400 kW Napetost: 400 VAC / 24 VDC Frekvenca: 50 Hz Leto: 2015 / 2017 Stanje: rabljeno, delujoče - popolna CHP enota - krmilna omara Hfsdjyxl Uqspfx Alfog - krmilni sistem / HMI - plinski motor in generator - Dobava po pregledu Cena: 125.000 EUR / EXW (naloženo) Lokacija: Nemčija/Düsseldorf Dobava: EXW (Ex Works)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 1.000 mm, širina obdelovanca (maks.): 800 mm, višina obdelovanca (maks.): 400 mm, največja hitrost vretena: 36.000 obr/min, hitrost vretena (min.): 1.000 obr/min, Popolno za: Visoko učinkovito 3D rezkanje majhnih kosov – natančno rezkanje z visoko izhodnostjo delov Materiali: Plastika, kompoziti kot so CFK / GFK, modelarski materiali, aluminij Panoge: Avtomobilska industrija, letalstvo, promet in logistika, prosti čas, sanitarna tehnika, gradnja plovil, avtomatizacija Referenčna številka: 1218 Razpoložljivost: marec 2026 Model: 5-osni CNC rezkalni stroj RT-F 1400 Podatki o vretenu: 8 kW / 6,4 Nm; 1000-36000 1/min; HSK E 40 Hitri pomik X/Y/Z: 40/40/30 Mere obdelovanca X/Y/Z: 1000 x 800 x 400 Krmiljenje: SIEMENS – Sinumerik One s HT 2 Izmenjevalec orodij: 12 orodij Mize: 1 okrogla miza Kontrola preloma in dolžine orodja: Renishaw-TS 27 R Ostalo: Kad za odrezke, stopalna rešetka Hfodpfxoxdwnde Alfeg Leto izdelave: 2026 Stanje: novo

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 36.000 obr/min, hitrost vretena (min.): 12.000 obr/min, CNC stroji znamke HG GRIMME SysTech Popolni za: Zelo učinkovito 3D rezkanje majhnih obdelovancev – natančno rezkanje z visokim izmetom delov Materiali: Plastika, kompoziti kot so CFK / GFK, modelarska gradiva, aluminij Panoge: Avtomobilska industrija, letalstvo, promet in logistika, industrija prostega časa, sanitarije, gradnja čolnov, avtomatizacija Razpoložljivost: januar 2026 Model: 5-osni CNC rezkalni stroj RT-F 1400 Hfjdpfx Alex S Etmefeg Podatki o vretenu: 8 kW / 6,4 Nm; 1000-36000 1/min; HSK E 40 Hitri pomik X/Y/Z: 40/40/30 Mere obdelovanca X/Y/Z: 1000 x 800 x 400 Krmiljenje: Fanuc z IPC, ročni terminal HMOP Type B Menjalec orodij: 12 orodij Mize: 1 okrogla miza Vakuumski sistem: da Preverjanje poloma orodja in dolžine: Renishaw-TS 27 R Ostalo: zbiralnik za odrezke, pohodno perforirano pločevino, pločevina za odsesavanje na zadnji strani Leto izdelave: 2026 Stanje: novo

Stanje: novo, Leto izdelave: 2025, dolžina podajanja os X: 80 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 60 mm, Popolnoma primeren za: uporabo v modelarstvu in izdelavi orodij, pa tudi za rezkanje drugih materialov – univerzalni zmogljiv stroj s hitrimi pomiki do 80 m/min Materiali: plastike, kompoziti kot so CFK/GFK, modelarski materiali, aluminij Panoge: avtomobilska industrija, letalstvo, promet in logistika, prostočasna industrija, sanitarna tehnika, ladjedelništvo, avtomatizacija _____ Referenčna številka: 1210 Razpoložljivost: takoj Tip CNC stroja: 5-osni CNC obdelovalni center G-S-F/UNI (35-15) Podatki o vretenu: 13 kW / 10,3 Nm; 12000-24000 obr/min; HSK F 63 Hitro pomikanje X/Y/Z: 80/80/60 Hjdox S Eqlopfx Alfjfg Dimenzije obdelovanca X/Y/Z: 3500 x 1500 x 700 Krmiljenje: SIEMENS – Sinumerik One z ročnim terminalom HT 2 Izmenjevalec orodij: 10 orodij Mize: 1 miza Vakuumski sistem: da Kontrola zloma in dolžine orodja: Renishaw-TS 27 R Drugo: na zahtevo Leto izdelave: 2025 Stanje: novo

Stanje: novo, Leto izdelave: 2025, TEMP 90 W9 SSR General Information: - Maximum temperature range: 90°C water - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Immersion pump (manufacturer: Speck) with pressure/vacuum function (leak stop mode) - Max. flow rate: 60 l/min - Max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: 12 litres - Brass/stainless steel fittings - Automatic water refill - Electronic level control - Indirect cooling system (plate heat exchanger) - Cooling capacity: ~40,000 kcal/h (10 plates) - Display pressure gauge - Integrated bypass - Solenoid valves for cooling and refill Electricals and Controls: - Electronic, self-optimizing PCB controller - Control voltage in unit: 24 V AC - Acoustic and visual alarm display Hfoded Aaruopfx Alfeg - Solid state relays - Safety thermostat - Sensor break monitoring - Monitoring for hose rupture and leakage - Connection cable with plug - Dimensions: 295 x 575 x h495 mm - Weight: 40 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER Hsdpfxju Hl R Te Alfefg (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Cost-effective single-column, microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 3 kN. User-friendly Windows software for universal test procedures; simple tests also possible without a PC. Made in Germany. Standard scope of delivery: • Machine with sensor (choice between 50 N and 3 kN) • Accuracy class 0.5 • Basic Windows software • 2-year warranty Optional equipment: • Comprehensive clamping tools (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending devices Custom solutions according to customer specifications • Extensometers / strain gauges: Clip-on and long-travel extensometers • Temperature and climate chamber Hsdpfx Asd H S Hislfjfg • Windows Software PM-Soft-Smart for universal applications, freely programmable • Commissioning and training

Leto izdelave: 2025, stanje: novo, Cost-effective single-column, microprocessor-controlled universal testing machine for tensile, compression, and bending tests up to 5 kN. User-friendly Windows software enables universal testing procedures; basic tests can also be carried out without a PC. Made in Germany Standard configuration: • Machine with sensor (choose from 50 N to 5 kN) • Accuracy class 0.5 • Windows basic software • 2-year warranty Optional equipment available: • Comprehensive range of grips and fixtures (mechanical, pneumatic, and hydraulic), e.g.: Compression plates Screw and wedge grips Bending fixtures Special versions according to customer specifications Hodpfjd H S Rrsx Alfofg • Extensometers: Clip-on and long-travel gauges • Temperature and climate chamber • PM-Soft-Smart Windows software for universal use, freely programmable • Commissioning and training