Ernst Stroj Za Odstranjevanje Napak Iz Pločevine nakup rabljenega (97.867)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, vhodna napetost: 400 V, skupna masa: 3.560 kg, višina obdelovanca (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm in width. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet components. With the SER600 Super Edge Rounder from Q-Fin, you can deburr, grind, edge break, round, deslag, remove oxide layers, or perform linear finishing on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput capacity of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model comes equipped with a magnetic support, making it ideal for processing flame-cut steel parts and other magnetic materials. The machine features 5 processing stations. It is operated easily via the HMI touchscreen panel located at the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this unit removes burrs and/or burn marks from the product surface. If there are no burrs, the abrasive belt can be omitted or removed. It is also possible to process your product with a finer abrasive belt or finish with a Scotch-Brite belt. Ijdpjl Dw D Ejfx Apteif The second and third stations feature a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations consist of 2 round brushes rotating in opposite directions (left and right). The brushes break the sharp edges of the product or, thanks to the unique combination of two brush systems, can round edges up to a radius of R=3 mm. With special brushes installed, the SER600 with magnetic system can also efficiently remove oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set.' The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless-steel extraction system operates wet, removing grinding dust from stainless steel, mild steel, and aluminum, thereby eliminating fire and explosion hazards. According to Q-Fin, this is the safest, simplest, and most sustainable solution for extracting grinding dust. The WES6000 ensures there is no grinding dust in the air and/or the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x very slightly used, like new (year of manufacture 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the frame and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - SER600 electrical connection: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 80 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2623-43, delovna širina: 1.100 mm, najv. debelina jeklene pločevine: 100 mm, Stroj za obdelavo robov Timesavers 32 WRBW - Demo stroj, letnik 2025 - Vakuumska miza za obdelavo mešanih materialov - Avtomatsko čiščenje mize - Agregat za odstranjevanje srha - Agregat za zaoblovanje robov - Agregat za ustvarjanje končne obdelave Isdpfx Apsytr Hnjtoif - Lahko se ponudi kot celoten sistem z odsesavanjem - Namestitev in usposabljanje izvede lasten servisni kader

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, The DMS 2KR has been designed for deburring components after laser or saw cutting, utilizing Flex Trim flap wheel systems. The DMS 2KR machine features two independent units, each controlled by separate inverters. A dedicated base for placing components enables very fast deburring of the ends of processed parts, such as pipes or profiles of various shapes. The built-in columns allow for quick and precise adjustment in multiple axes. Electronic speed and rotational direction control enable precise setting of machining parameters. The machine is entirely manufactured in Poland by our company, based on extensive experience in the grinding process. TECHNICAL DATA: - Adjustable height - Power – 0.55 kW - Speed controlled by inverter - Two motors - Disc heads - Dust extraction covers included - Base for easy operation - Weight – approx. 140 kg - Dimensions: 1200x750x1400 mm (W x L x H) ADVANTAGES OF THE DMS 2KR: - Easy installation Iiedpfoxhdcpjx Aptof - User-friendly operation - Provides excellent, uniform grinding results

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, delovna širina: 950 mm, najv. debelina pločevine: 120 mm, delovna višina: 120 mm, vrsta upravljanja: CNC krmiljenje, Oprema: CE označba, TEHNIČNI PODATKI Postaja 1: Brusni trak Postaja 2: Rotacijska krtača Postaja 3: Rotacijska krtača Minimalna debelina pločevine: 0,5 mm Maksimalna debelina pločevine: 120 mm Delovna širina: 950 mm Delovna višina: 0,5-120 mm PODROBNOSTI O STROJU Moč: 39 kW Upravljanje: CNC Število postaj: 3 Dimenzije & teža Dimenzije (D x Š x V): 3.940 x 1.980 x 2.010 mm Neto teža: 7.000 kg Iedpfx Apey Hhp Teteif Transportni paketi: 4 OPREMA CE oznaka

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Iiedpfx Aed Ev Upsptjf Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: novo, DM100 ZC – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching of metal workpieces ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore hardness) with an abrasive belt, effectively removing heavy burrs in the initial step. The second station features two counter-rotating cross belts with abrasive blocks, which round off the edges of the entire product, both internally and externally, in a second step. A major advantage is the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical specifications – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Isdpfx Aped Hintsteif Number of cross belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Iedpod Ixadjfx Aptsif Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: rabljeno, Deburring and fine grinding machine for sheet metal / flat material, new Iijdpfxom Nlm Dj Aptof The compact machining center for deburring, deslagging, derusting, oxide layer removal, edge rounding, fine grinding, and even polishing of metal surfaces. Working height: adjustable from 0.5 mm to 150 mm Working width: 1150 mm Maximum part weight: 300 kg Wide belt with abrasive belt length: 2200 mm Supplied as standard with vacuum holding system, optionally with magnetic holding system Thanks to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal processing units and one additional external processing unit. Please contact us for further information and images via email (at) or

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Iedsnah Tajpfx Aptjif Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large components. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt length: 2620 mm Equipped as standard with a vacuum holding system, optionally with a magnetic holding system The use of 2620 mm long abrasive belts ensures a consistently smooth surface finish and reduces consumable costs due to the belts' longer lifespan. Thanks to the modular design of the machine, the optimal configuration for the customer's processing requirements can be offered. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, in combination with advanced mechanics and electronics, make this series a universal machining center for deburring and final finishing. Please contact us for further information and images via email (at) or * Iiodpfsnah Tdjx Aptef

Stanje: rabljeno, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and even polishing of metal surfaces. Iedpfx Apjm Rpy Rotoif Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt length: 2620 mm Standard with vacuum holding system, optional with magnetic holding system The use of 2620 mm long abrasive belts provides a consistently smooth surface and reduces consumable costs, as the belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's processing task. The machine structure can accommodate up to 3 internal processing units and an additional external processing unit. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for further information and photos via mail(at) or

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Euro Fintec 410 je stroj za odstranjevanje ostrih robov, opremljen s 2,5 cm širokim trakom. Nastavitev traku je enostavna, kar omogoča prilagoditev kompleksnim postopkom odstranjevanja ostrih robov. Naprava je opremljena tudi z vrečko za zbiranje prahu, kar zagotavlja varno delovanje. Je v odličnem stanju in priloženih je več trakov za odstranjevanje ostrih robov. Ijdpszmafqefx Aptjif

Leto izdelave: 2023, stanje: novo, ! Pakkumised ainult Balti riikide (Leedu, Läti, Eesti) klientidele. - Mobiilne ja kompaktne konstruktsioon Isdpfx Aoixz Hdjptoif - Standardvarustuses vaakumsüsteem 2,2 kW - Lisavarustusena saadaval 2 või 4 elektromagnetiga - Varustatud kahe lihvimispeaga - Kinnituskronstein topelt kahekäe juhtimisega (CE-märgistus) - Töödeldava detaili laius: maksimaalselt 780 mm / pikkus piiramatu - Masina elektritarbimine: 400 V, 50 Hz, 10 A, 6 kW - Mõõdud: 1435 x 1100 x 1510 mm (P x L x K)

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ščetkalični in sortirni stroj / Univerzalni stroj s ščetkami Proizvajalec: Leif Lorentz / Universal Finishing Systems Tip: B 4 1000 Iijdpfx Apjxrlgqetef Univerzalna uporaba kot sortirna enota, za odpraševanje in čiščenje obdelovancev ali za brušenje Letnik izdelave: 2005 Delovna širina: 800 mm Širina traku: cca 850 mm Prehodna višina: cca 60 mm 2 ščetkalni enoti od zgoraj, vsaka 1,1 kW, brezstopenjska regulacija hitrosti, 350-900 obr./min Opremeljeno s ščetinami kot na voljo. Dimenzije stroja: cca 2400 x 1300 x 1700 mm

Stanje: novo, Diameter 150 mm Workpiece length 1300 mm Workpiece width 800 mm Max. grinding wheel diameter 150 mm Speed range 0 - 2830 rpm Working height 945 mm Head swivels +/- 180° Motor power 1.5 kW Machine weight approx. 230 kg Required space approx. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to conventional grinding and deburring machines. Its head, consisting of a grinding wheel and a flap brush, can be swiveled 180°, allowing for quick changeover between the units. The weight-balanced arm enables easy movement of the head over the workpiece, resulting in uniform edge rounding. The worktable prevents even the smallest components from slipping. Equipment: - Deburring and rounding of laser-cut or punched sheet metal parts - Grinding head consisting of a grinding wheel & a flap brush - Grinding head stations can be swiveled 180° - Working area 800 x 1300 mm - Weight-balanced arm for easy swiveling - Non-slip table surface Iijdpfexab Hpjx Aptof - Ergonomic machine operation via push buttons "On/Off" - Grinding head with stepless speed control via frequency inverter - Handle for ergonomic handling

Stanje: novo, Brushes - Diameter Ø 250 mm Brush width 40.0 mm Speed range 2850 rpm Operating voltage 400 Volt Total power requirement 1.3 / 1.8 kW Machine weight approx. 36.0 kg Space requirement approx. 415 x 467 x 356 mm Features: - Deburring of single parts and small batches - Deburring of straight round, rectangular, and square tubes, as well as flat materials - Heavy-duty, durable industrial design - Maintenance-free motor - Long service life and smooth operation due to balanced rotor - Equipped with high-quality ball bearings Iisdpfxexaamnj Aptjf - Storage shelf for safety goggles - Incl. 1 multipurpose wire brush, wire diameter 0.35 mm - Operating manual included

Leto izdelave: 1979, stanje: nepreverjeno (rabljeno), Hurth ZEA1 Gear Deburring Machine -WKG 475- Offered here is a gear deburring machine from Hurth. Technical Data: Iodpfx Apehg Nuistoif Manufacturer: Hurth Model: ZEA1 Year of manufacture: 1979 Adjustability of processing unit: 150 mm Tool outside diameter: 190-205 mm Workpiece outside diameter: 20-120 mm Workpiece length: 150 mm Gear width: 50 mm Beveling module: 1-4 mm Bevel width: 0.7 mm Weight: 2 t

Stanje: novo, Leto izdelave: 2025, Working width 1500 mm Workpiece thickness – max. 0.5 – 50 mm Dimensions 3300 x 1500 x 1800 mm Feed rate stepless 0–4 m/min Total connected load 20.4 kW Machine weight approx. 2800 kg The SBM-L G1S2 grinding and deburring machines are designed for double-sided deburring and edge rounding of workpieces in a single pass. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser-cut parts, and stamped parts. The L series is equipped with three processing units each on both the top and bottom sides. Workpieces made of stainless steel, steel, aluminium, or non-ferrous metals can be processed on the top, bottom, or both sides as required. Double-sided sheet metal processing and edge rounding in just one operation enable time savings of up to 60%. Seamless integration with automation solutions or incorporation into production lines is also possible. The machine design ensures ergonomic operation and a pleasant working environment—free from dirt, dust, and noise. Comprising: Iisdpfxsx H Tvfs Aptef - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 sanding belts with rib P60 Co - 2x SBM-L 1500 sanding belt L=4123 W=70 P80 Co - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP - DDE 3002 dry extraction unit - DDE 3002 standard piping The machine is available ex-stock Niederlangen for immediate delivery.

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 20 mm Rotational speed 2850 rpm Angle range 0 - 60° (stepless) Ijdpfx Apeppgcvetsif Machine weight approx. 19.5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for so-called FACING – the removal of an unwanted material layer on the end face of the workpiece, such as occurs during flame cutting of sheet metal. Specifically developed for producing visible bevels and weld seam preparations. Powerful electric drive for extreme loads. * High-performance motor * Stepless adjustment of the working angle in the range of 0° - 60° * FACING – edge processing at 0° angle for removing unwanted material layers after flame cutting * Unique mechanical scale for setting chamfer width for greater precision * Very compact and ergonomic design for high working productivity * Surrounding protective frame to prevent damage and provide versatile grip options * With suitable accessories, pipes from D=150 mm can also be machined * Additional adjustable handle - Chamfer width (hypotenuse): 0 - 20 mm = 400 MPa / 0 - 16 mm = 400 MPa - Motor: 1100 W We are also pleased to offer you an optional pipe beveling attachment (D=150mm) for this device.

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 18 mm Angle range 15° - 50° Machine weight approx. 110 kg Beveling System UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed Ijdpfx Apok Egrtoteif The UZ18 Hardworker is one of the most powerful automatic-feed beveling machines available on the market. It is suitable not only for workshop use but also for on-site assembly. The machine features a stepless adjustable bevel angle system. Thanks to its specially designed drive system, the UZ18 Hardworker is suitable for tougher materials as well. The machine is equipped with automatic feed, making operation with the UZ18 Hardworker highly comfortable. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 70 x 150 x 6 mm * Suitable sheet thickness range: 6 – 40 mm * The bevel angle can be easily and steplessly adjusted from 15° to 50° without the need to replace any parts * Double-sided beveling (X, K geometry) without material handling * Easy connection to a 3D manipulator for simplified operation and handling * Silent operation * Equipped with automatic feed * Suitable for stationary or mobile use * The machine processes large workpieces without additional support at a speed of 1.9 m/min * Smaller workpieces are inserted directly into the machine - Max. bevel width (hypotenuse): 18 mm - Steplessly adjustable angle: 15° - 50° - Sheet thickness range: 6 – 40 mm - Motor: 750 W - Feed speed: 1.9 m/min - Weight: 110 kg - Dimensions: 438 x 719 x 644 mm We are happy to offer you an optional mobile 3D manipulator for this unit upon request.

Stanje: novo, Diameter -- mm Workpiece width -- mm Workpiece length -- mm Chamfering System UZ30 EXPRESS Maximum chamfer width 30 mm with automatic feed Stationary UZ30 EXPRESS is one of the best solutions for chamfering large and small batches, as well as small parts or long and narrow flat bars. The UZ30 EXPRESS can be used not only for chamfering, but also for deburring. Thanks to the unique geometry of the milling cutter, the feed rate can be adjusted to up to 3.5 m/min. For longer workpieces, it is possible to equip the machine with an additional infeed and outfeed table, increasing the working area to an impressive 2,824 mm. - Designed for chamfering steel, aluminum, copper and other materials, flat bars, pipes, and welding bevels - Chamfering performed by high-quality milling (mirror finish) - Feed control via rotary knob - Cutter speed controlled via frequency inverter - Further optional accessories available for pipe chamfering - Option to extend the work table to a total of 2,824 mm - Fast and precise machine adjustment via gauge Technical Data: Approximate values of maximum chamfer width: at 30° – 30 mm, at 45° – 20 mm, at 60° – 17 mm Adjustable chamfer angle: 30° – 60° (constant) Application range – sheet thickness: 3 – 100 mm Pipe chamfering: OD 102 mm – OD 156 mm Milling motor power: 4,000 W Milling head speed: Adjustable via rotary knob (frequency converter) Feed rate: 0.6 – 3.5 m/min Iedpfor I E Exox Aptjif Weight: 400 kg Dimensions: 825 x 1200 x 1615 mm Number of indexable inserts: 5 pieces

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 15 mm Iisdpjk Uqhaefx Aptsf Angle range 15-50° Sheet thickness 6-40 mm Total connected load 1.5 kW Feed speed 3.5 m/min Dimensions 530 x 395 x 860 mm Machine weight approx. 94 kg The UZ15 RAPID machine is one of the fastest bevelling machines with automatic feed on the market. It is suitable not only for workshops, but also for on-site assembly jobs. It features an infinitely variable bevel angle adjustment system. Additionally, the machine is equipped with an automatic feed, making operation with the UZ15 Rapid very convenient. - Suitable for conventional steel (up to a strength of 600 MPA/87,022 PSI), brass, copper, and aluminium materials - For bevelling workpieces with minimum dimensions of 70 x 150 x 6 mm - Operating range for sheet thickness 6–40 mm - The bevel angle can be easily adjusted steplessly from 15° to 50° without changing any parts - Double-sided bevel (X, K) without material handling - Simple connection to the 3D manipulator for easier operation and handling - Silent operation - Equipped with automatic feed - For stationary or mobile use - The machine can work with large workpieces without any support at a speed of 3.5 m/min - Smaller workpieces can be inserted directly into the machine - Discounted price when purchasing the UZ15 RAPID together with the 3D manipulator

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 3 mm Spindle speed 3600 rpm Angle range 30 - 60° (stepless) Machine weight approx. 31 kg Space requirement approx. 530 x 420 x 410 mm Maximum chamfer width of 3 mm - Mechanically adjustable chamfer angle Designed for deburring and chamfering steel parts and workpieces. Suitable for processing various materials. Robust and stable machine construction. Iijdjppgcrspfx Aptof * Scale for setting machining depth * Safety cover * Adjustable machining angle * For steel, stainless steel, aluminium and other materials * Precise, heavy-duty and extra-long mechanical guide - Number of indexable inserts: 5 pieces (four-edged) - Feed: manual

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 12 mm Angle range 30/45/22.5/37.5/50 ° Machine weight approx. 30 kg Beveling System UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed Iiodpfx Ajppgcyeptjf The UZ12 ULTRALIGHT is one of the lightest beveling machines with automatic feed on the market. Thanks to its compact size and low weight, it is suitable not only for workshops but also for on-site assembly. The machine is equipped with an automatic feed, making operation with the UZ12 ULTRALIGHT very comfortable. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 65 x 60 x 3 mm * Operating range plate thickness: 3 – 35 mm * Beveling pipes from an internal diameter of 95 mm * Variable adjustment of the desired bevel via interchangeable holder kit for each given angle * Double-sided bevel (X, K) without material handling * Quiet operation * Equipped with automatic feed * For stationary or mobile use * The machine processes large workpieces without any support at a speed of 1.8 m/min * Smaller workpieces are placed directly into the machine * Lightweight and compact design, can be handled by a single operator * Thermal motor protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (interchangeable KIT) - Working range plate thickness: 3 – 35 mm - Motor: 400 W - Feed rate: 1.8 m/min - Dimensions: 470 x 294 x 523 mm Optionally, we would be glad to offer you a 3D manipulator (mobile) for this device.

Stanje: dober (rabljeno), Leto izdelave: 2016, This F200XL-VAC is used but has been inspected and is in excellent condition. The F200 XL is a 3-station machine, equipped as standard with the brush height tracking system designed by Q-Fin. Combined with its straightforward push-button control system, this ensures that setting up and operating the F200 is intuitive, resulting in the most user-friendly machine available on the market. The machine comes as standard with infinitely variable speed adjustment for both the conveyor and the brush(es) and/or grinding head(s), making all possible operations and finishes achievable. You determine the desired finish yourself. Iedpfx Apeyt Nhvoteif The F200 XL can be equipped with either a vacuum system (for non-ferrous metals, e.g., stainless steel and aluminium) or a magnetic system (for ferrous metals). These systems ensure effective fixation of the products to be processed on the conveyor table, allowing even smaller workpieces (from 10x10 mm) to be processed safely, trouble-free, and quickly. At Q-Fin, we are convinced: a narrower machine is ideal for small workpieces, while a wider machine suits larger parts. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. You can view this machine in our showroom in Bergeijk.