Stroj za odstranjevanje napak

LISSMAC SBM-L 1500 G1S2 evo

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Isdjd Ev Upopfx Adkohw Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. Ihjdpfx Adod Ixadokow The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: zelo dobro (rabljeno), Grating Panels / Shelf Panels for Pallet Racks for 180, 270, and 360 cm Bay Widths Specifications: Material finish: hot-dip galvanized Total width: approx. 1,340 mm (cross bar direction) Total depth: approx. 1,080 mm (load bar direction) Suitable for upright depth: 1,100 mm Clear support span: approx. 990 mm Beam seating: approx. 50 mm Mesh size: approx. 33 x 66 mm Load bar height: 30 mm or Material finish: hot-dip galvanized Total width: approx. 1,330 mm (cross bar direction) Total depth: approx. 1,040 mm (load bar direction) Suitable for upright depth: 1,050 mm Clear support span: approx. 940 mm Beam seating: approx. 50 mm Mesh size: approx. 45 x 70 mm Load bar height: 30 mm We have gratings in stock for the following rack depths: 1.0m, 1.05m, 1.1m, or 1.2m. These grating panels are ideally suited to maximize the utility of your racks and provide excellent support for your storage needs. Price on request – Benefit from expert consultation! Are you looking for additional shelf panels or grating panels in other versions? No problem! Our team will gladly help you design a custom rack tailored to your specific requirements. Do you have a rack to sell? Simply send us photos and dimensions and we will provide you with a fair offer. Contact us: Isdpfxep Duf Nj Adkehw BLB GmbH – Contact: Mr. Dominik Blum Tel. Take advantage of our delivery service directly to your doorstep! If you have any questions, don’t hesitate to contact us – we look forward to your call or message!

Stanje: novo, Leto izdelave: 2025, -Stroji po meri, prilagojeni vašim proizvodnim potrebam. -Naši stroji po meri so natančno zasnovani in izdelani tako, da ustrezajo specifičnim zahtevam vaših proizvodnih procesov. Ne glede na to, ali gre za dodelavo, odstranjevanje oksida ali zaobljanje robov, ti stroji zagotavljajo izjemno natančnost in zmogljivost. Ihodshq Dbxepfx Adkew -Dodelava (Finishing): Za doseganje gladke, visokokakovostne površinske obdelave na različnih materialih, ki zagotavlja stalen profesionalen in poliran videz. -Odstranjevanje oksida: Učinkovito odstranjevanje površinskih oksidov za čisto, neonesnaženo površino – ključno za nadaljnjo obdelavo ali nanos premazov. -Zaobljanje robov: Natančno zaobljanje robov po vaših specifikacijah izboljša varnost ter celotno kakovost končnih izdelkov. Možnosti prilagoditve Vsak stroj je zasnovan posebej po vaših zahtevah in omogoča prilagodljivost pri: Hitrosti obdelave: Nastavljiva hitrost, ki sledi vašemu tempu proizvodnje. Posebne funkcije: Možnosti vključujejo sisteme za odsesavanje prahu in dima, nastavljive pritiske ter programabilne konfiguracije za optimalen potek dela. Zgrajeni za dolgo življenjsko dobo. Naši stroji po meri so izdelani za dolgotrajno in zanesljivo delovanje skozi dolga proizvodna obdobja. Ne glede na to, ali gre za manjše projekte ali zahtevno industrijsko proizvodnjo, ti stroji leto za letom zagotavljajo vrhunske rezultate.

Stanje: novo, Leto izdelave: 2025, - TFON Sistem zaobljenja ivica i površinske dekontaminacije. - Kompatibilnost materijala: Pogodno za nisko-ugljenični čelik, aluminijum i nerđajući čelik. - Radni spektar debljine: Obrađuje materijale debljine od 0 do 120 mm. - Zaobljenje ivica: Obezbeđuje zaobljenje ivica radijusa 2, za glatke i sigurne ivice koje unapređuju izgled i funkcionalnost izratka. - Precizna kontrola: Opremljen Siemens automatskim sistemom za preciznu i doslednu kontrolu tokom celokupnog procesa. - Nezavisne stanice: Ihedohq A T Uepfx Adkow Više procesnih stanica omogućava raznovrsne operacije – različiti zahvati mogu se izvoditi istovremeno ili uzastopno. - Opcije radne površine: Dostupne dimenzije radnih stolova: 650 mm, 1000 mm ili 1300 mm, u zavisnosti od potreba proizvodnje. - Tipovi stolova: Fleksibilne konfiguracije uključuju magnetne, vakuumske ili magnetno-vakuumske stolove, što omogućava sigurno fiksiranje raznih materijala i veličina delova. - Plazma i kiseonička tehnologija: Koristi naprednu plazma i kiseoničku tehnologiju za efikasno uklanjanje debelih strugotina i šljake nakon sečenja, omogućavajući čistiju i glatkiju površinu. - Površinska dekontaminacija: Efikasno uklanja površinske nečistoće kao što su rđa, oksid ili skala, pripremajući delove za dalje procese. - Zaobljenje ivica za potrebe zaštitnog premaza: Savršeno priprema površinu za farbanje i nanošenje zaštitnih premaza, obezbeđujući ravnomernu i besprekornu završnu obradu. - Industrijske primene: Idealan za centre za obradu čelika, energetiku, rudarstvo, građevinsku i automobilsku industriju – prilagođena rešenja za zahtevne primene. - Ujednačeni rezultati: Šest lamelnih točkova radi sinhronizovano, obezbeđujući konstantne, jednako zaobljene ivice na svakom delu. - Pneumatski sistem oscilovanja: Produžava vek trajanja brusnih traka minimiziranjem habanja i održavanjem stalnog kvaliteta obrade tokom vremena.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 3.000 kg, Največja masa rotorja ---3000 kg (6613,87 lb) Najmanjša masa rotorja ---30 kg (66,14 lb) Največji premer rotorja ---1400 mm (55,12 in) Najmanjši premer gredi ---20 mm (0,79 in) Največji premer gredi ---300 mm (11,81 in) Iedpfxer Dd Avo Adkehw Moč motorja ---11 kW (14,75 KM) Pogonska enota (standardno) ---11 kW (14,75 KM) Hitrost uravnoteženja ---0-3000 vrt/min (25 Hz) (nastavljiva navzgor in navzdol) Pogonska enota --- Samo jermen ali gred / jermen + gred Dolžina postelje ---3000 mm (118,11 in)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, used Timesavers deburring machine 42-series-1350-WRB Technical Data: Year of manufacture: 2015 Condition: overhauled (2026) The machine is powered up and can be inspected by appointment! Max. working width: 1350 mm Abrasive belt dimensions (W x L): 1380 x 1900 mm Antistatic device Maximum weight: 100 kg Electrical connections: 400 V Frequency: 50 Hz 1st Unit: Contact roller ø 180 mm Contact roller, 55° Shore NI, grooved Pneumatic oscillation Ihedjyk U Szopfx Adksw Fine adjustment via lifting and lowering of the contact roller Dial gauge Main motor: 15 kW Processing speed: 11 m/s, in feed direction 2nd Unit: Rotary brush unit 8 brushes, ø 350 mm Motorised height adjustment with toggle switch Drive motors: 5 x 1.5 kW Rotary unit speed, frequency-controlled Processing speed: 6–17 m/s 3rd Unit: Panel edge cleaning brush Feed: Fixed vacuum table Feed belt: flat, perforated, oil- and heat-resistant, flame-retardant Feed motor: 2.6 kW, frequency-controlled, 0.6–8 m/min Toggle switch for feed belt forward/reverse Motorised table height adjustment: 0.18 kW, 0–100 mm, digital display Pressure rollers: Spring-loaded pressure rollers, ø 50 mm, front with limit switch Vacuum pump: 15 kW Machine built to CE guidelines Main switch, hour meter Sound pressure level: ± 80 dB Machine weight: 6,200 kg On request, we can also offer extraction and/or installation!

Stanje: rabljeno, Leto izdelave: 1998, Workpiece weight: 150 kg Workpiece length: 2500 mm Diameter: 160 mm and above Balancing speed adjustable: 100 - 3000 rpm Bearing journal diameter: 160 - 350 mm Operating voltage: 400 V Total power requirement: 1.5 kW Machine weight approx.: 1.5 t Space requirement approx.: 7.50 x 1.30 x 1.60 m Control dimensions: 0.60 x 0.60 x 1.85 m Measuring and evaluation software: TIRA X9000 Balancing in two planes or separately according to static/dynamic unbalance possible Ihjdpfx Aowcg Elodkjw Operating system: Windows XP Measuring software update: 2007 Serial no.: R 32/98 Max. display sensitivity: 0.5 gmm Belt drive: 100 - 3000 rpm.

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Two identical Göztepe belt fryers for vegetables (onions, potatoes, nuts, etc.) are available. Working length: 6,800 mm, working width: 700 mm, infeed height: 1,280 mm, discharge height: 1,060 mm, operating temperature: 180°C. Lower plastic belt length/width: 14,000 mm/720 mm, upper plastic belt length/width: 8,500 mm/720 mm. Machine dimensions (L/W/H): approx. 6,900 mm/1,800 mm/3,500 mm. Total power: 135 kW. Documentation available. Inspection on site is possible. Ihedpfxju Tiy Ne Adkjw

Stanje: rabljeno, Leto izdelave: 2025, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN078146, 12 mesecev garancije / 1800 delovnih ur Ijdpfx Aexp Nd Ijdkshw