Amtec Avtomatski Sistem Pakiranja V Skrčljivo Folijo nakup rabljenega (67.478)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, skupna širina: 1.750 mm, skupna dolžina: 1.750 mm, skupna višina: 1.700 mm, vrsta vhodnega toka: trifazni, Automatic Basket Washer HYDRO WASH 1200 2-in-1 is a multifunctional device designed for fully automatic washing of parts in a motor-driven rotating basket or, for more complex-shaped components, high-pressure washing at 140 bar. This combination of processes ensures that the device is suitable for use in any workshop. It is ideal for companies specializing in the regeneration of turbochargers, steering gears, or gearboxes, significantly improving workflow efficiency. To guarantee user safety and maintain optimal washing parameters, the washer is equipped with an electronic control panel and a set of cooperating sensors. Operating principle: Before first use, fill the tank with washing liquid. The recommended cleaning solution is a mixture of MRS Cleaner Strong concentrate and water in the appropriate ratio. The Hydro Wash washer enables both manual and automatic washing. a) For automatic washing, prepare the unit (fill with water and concentrate), close the glovebox cover, close the lid by pressing and holding the two buttons (front and rear of the unit simultaneously), then press the start button. *Basket rotation is possible with the lid open. This is done by pressing the right button on the foot pedal or simultaneously pressing both buttons (front and rear of the unit), providing the glovebox cover is closed. b) For manual washing, close the lid by pressing and holding both buttons (front and rear simultaneously). Open the glovebox cover and press the left button on the foot pedal. STANDARD EQUIPMENT INCLUDES: - Lid-release sensor for opening during the washing process - Liquid level sensor in the tank (dry-run protection) - Liquid temperature sensor - Adjustable spray arms with high-quality stainless steel nozzles from Spraying System - Mechanically driven rotating basket - 140 bar high-pressure pump - Compressed air gun - Pressure regulator with air/water separator - Coarse insoluble contaminant filter (0.8mm mesh filter) - Fine filter for contaminants - Adjustable feet - Drain valve Kodpfxexm Ulle Abyjna - Pneumatic actuators Technical Specifications: Basket diameter: 1200 mm Working height: 500 mm Basket load capacity: 300 kg Programmable operation time: 0-99 min Washing temperature: 60℃ Heater power: 12 kW Tank capacity: 400 l Spray output: 200 l/min Spray operating pressure: 4.5-6 bar Manual washing pressure: 140 bar Overall width: 1750 mm Overall depth: 1750 mm Overall height: 1700 mm (2450 mm with lid open) Power supply: 3~400V Optional extras: - Belt oil separator - Set of low-pressure lances - Reinforced pump WE ALSO OFFER HYDRO WASH 2-IN-1 WASHERS IN OTHER SIZES. MODELS 800 AND 1000 AVAILABLE. CONTACT US FOR DETAILS ON OTHER MODELS.

Leto izdelave: 2009, stanje: dober (rabljeno), • Fully automatic • Maximum package height (mm): 650 Kodpfx Abjpu Anmsyona • Minimum package height (mm): 15 • Maximum package width (mm): 1250 • Minimum package length (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Discharge table • Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: og5, 5,000 liter capacity according to DIN 6616/D, above-ground, double-walled, including inspection certificate. The tank features two saddle feet, a DN 500 manhole with manhole cover, is pre-owned, emptied internally, professionally cleaned, and will be equipped with the following fittings: - 1 filling pipe with TW cap (filling cover) and dip tube - 1 gauging pipe with dipstick and dipstick cap - 1 vent pipe with vent cap - 1 brand-new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detection device with type approval and leak detection fluid The tank is suitable for the storage of HVO (Hydrotreated Vegetable Oil). Ksdpecyb E Nofx Abyena The tank will be primed and painted externally. Length = approx. 2.80 m / Diameter = 1.60 m / Weight approx. 1.3 t / ex works, loaded free of charge. We are happy to offer you cost-effective delivery. You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Modula Lift ML50D Storage Lift The Modula units are automatic vertical storage systems based on the principle of vertical storage and floor space savings. They allow you to store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula is the result of over 30 years of experience by an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during tray insertion • Dynamic tray location assignment in the unit according to item heights • Frame made from galvanized steel profiles • Vertical drive utilizing Eagle steel-reinforced toothed belts • Extractor guide system with 6 HDPE rollers per side • Tray management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. Knjdex Rpm Uopfx Abyja The trays have a width of 4100 mm and a depth of 860 mm, providing a storage surface of 3.53 m² per tray. With 53 trays, this results in a total storage area of 187.09 m². The load capacity per tray is 500 kg, offering a total capacity of 26,500 kg across all 53 trays. Manufacturer: Modula Year of manufacture: 2010 Model: Modula Lift ML 50D Height: 6,900 mm Tray width: 4,100 mm Tray depth: 857 mm Tray height: 120 mm Tray net load: 500 kg Gross total load: 70,000 kg Device dimensions (internal picking, W x D): 4,517 x 3,165 mm Device dimensions (external picking, W x D): 4,517 x 4,058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: Up to 120 trays/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 53 Can be shortened to 4,900 mm Dismantling costs of over €6,000 are already included Item location: 37308 Geisleden Product video 1 Product video 2 For data sheet, see Documents tab. Financing through our partner bank is also available. komplett-konzept.leasingo.de You will find more new and used items in our shop! International shipping costs on request!

Stanje: rabljeno, Leto izdelave: 2000, Tok do 300 A Gorilne glave. Potreben prostor pribl. ... m Kjdpfx Absyacp Heysna

Stanje: rabljeno, Leto izdelave: 2000, Tok do 350 A Kedpeyacpyefx Abyena Gorilne glave. Prostorska zahteva cca ... m

Stanje: rabljeno, Leto izdelave: 2016, The PDFD line consists of two main components: the DFC 60 tenoning and profiling station (where the ends of the laths are machined) and the PHSL finger-jointing press, which joins elements into laths up to 6.6 m in length, with the ability to program up to eight intermediate cross-cuts, dividing the lath into sections of operator-defined length. Between these main machines, there are transport devices that also serve as a pre-tenoning station. The presented line configuration enables an output of approx. 8,500 – 10,500 linear meters per shift. The machines have undergone a complete overhaul. One-year warranty included. Kjdpjc U Txksfx Abyjna The microprocessor-controlled system allows flexible adjustment of working parameters to suit user requirements. This line is capable of processing both “calzing” type elements and components for manufacturing tabletops (joined along the grain). The use of an outfeed table with automatic feed of laths onto the infeed conveyor of the PHSL press allows the line to be operated by a single worker feeding elements. The outfeed table is equipped with a buffer screen, increasing efficiency and operational smoothness. The line operates in automatic mode with manual material feeding. The line’s components can be arranged in various (customer-agreed) configurations, ensuring the machine fits the user’s available workspace. Technical Specifications: - Infeed width for tenoning machine: 650 mm - Width of glued elements: 30 – 155 mm - Length of glued elements: 170 – 900 mm - Thickness of glued elements: 20 – 70 mm - Operating air pressure: 0.6 MPa - Compressed air demand: approx. 25 m³/h - Working capacity: up to 4 cycles/min (lath 6,600 mm) - Length of laminated element: 4,500 – 6,600 mm - Operating voltage: 3/N/PE 400 V 50 Hz - Control voltage: 24 V DC - Power requirement: max 100 kW Wooden laths are placed by the operator onto the carriage of the first tenoning machine. Loading the elements initiates the milling cycle. The first machine squares the ends of the batch and profiles the tenon shape. The batch is then transferred to the table of the second tenoning machine, where the other end is machined and glue is applied. Elements from the DFC-60 D tenoner are fed via a chain conveyor to the pre-tenoning assembly, where a set of rollers and a pressure device preliminarily clamp the finger-joint edges before entering the press. Pre-machined elements are then conveyed to the press table, where, after reaching the required length, they are cut. Using a pusher bar and pressure bar, they are moved to the pressing bed area, where the pressing process takes place. The glued and pressed, finished lath is pushed onto the press outfeed table. After moving the elements to the pressing bed, the process of loading new elements onto the press table is carried out in parallel with the described steps, maintaining continuous press operation and thus increasing gluing efficiency.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, 30 paquetes/min – Siemens Simatic OP7 Envolvedora retráctil y máquina de enfajado adecuada para cosméticos y productos pequeños envasados. La máquina forma conjuntos y los envuelve con film plástico, seguido de un túnel de retracción para un embalaje ajustado. Equipada con portabobinas de film superior e inferior y sistema manual de empalme de film. El túnel de retractilado cuenta con una sección de enfriamiento en la salida y control de velocidad ajustable. La máquina es apta para diferentes formatos de producto y agrupaciones, y se suministra con documentación. Velocidad máxima: 30 paquetes/min Ancho del transportador de cadena charnela: 80 mm Ancho del transportador del túnel retráctil: 480 mm Panel de control: Siemens Simatic OP7 Sistema de film: Bobinas superior e inferior con empalme manual Túnel retráctil: con sección de enfriamiento en la salida Knjdpfx Absyt Hiqjyja Regulación de velocidad: ajustable Dimensiones del producto (mín / máx) Longitud: 50 – 100 mm Altura: 100 – 300 mm Ancho: 25 – 60 mm Dimensiones de agrupación (mín / máx) Longitud: 75 – 330 mm Altura: 100 – 300 mm Ancho: 50 – 100 mm Información adicional Sistema de sobrealimentación incluido Portabobinas superior e inferior Documentación disponible

Stanje: rabljeno, A packaging machine is being offered for sale. The machine is capable of packaging goods either in cartons or in bags. Knedpfxjur N Nce Abyoa

Stanje: dober (rabljeno), 1 x Sistem za tehtanje in pakiranje Sestavljen iz: - VFFS pakirni stroj, 10-glavna večglava tehtnica, vedro dvigalo, odvodni transporter, ICE tiskalnik, mostna ograja na 3 straneh. Specifikacije Cyclone 200B: Maksimalna hitrost 80 vreč na minuto Širina vreče 60–200 mm Dolžina vreče 50–280 mm Napajanje 3 faze, 0,375 kW Priložen ICE tiskalnik Kodpfezgc H Djx Abyona *Prosimo upoštevajte, da naprava nima stopnic – vključene so le mostne ograje na 3 straneh* *UKFM lahko pripravi ponudbo za demontažo sistema in dostavo na britansko celino*

Stanje: novo, Max welding current: 200 A Ksdpfxog U Tcce Abysna Open-circuit voltage: 14 - 24 V Input voltage: 230 V Weight: 25 kg Dimensions (LxWxH): 500 x 200 x 300 mm Accessories: • Hose package • Ground cable • Welding nozzles

Stanje: dober (rabljeno), Resato HBU-B160 High-Pressure Gas Workshop Test System Ksdpfx Aor Hmihsbyjna In the oil and gas industry, everything revolves around the extraction of crude oil and natural gas. One of the challenges is to optimize the use of facilities in order to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure testing ensures the quality and safety of components used in oil and gas production. By injecting a chemical fluid, the well is stimulated. With its controls, the high-pressure system manages and regulates backpressure and liquids. This enables safer extraction of oil and gas. Manufacturer: Resato Test system: HBU Model: HBU-B160 Max. pressure: 200 bar Max. capacity: 1570 cc/ Max. pressure: 7 bar 2 x gas cylinder holders 3 x gas cylinder trolleys Digital control panel missing Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more new and used items in our shop! International shipping costs on request!

Stanje: novo, Vertical form-fill-seal machine AMTEC VFFS Pro S100L with 14-head multihead weigher, Z-type conveyor, working platform, discharge conveyor belt, and collection table. Suitable for bags with a length of 50–300 mm (single pulling) and a width of 80–240 mm; packaging machine cycle rate in idle mode: max. 100 cycles/min, sealing unit powered by servomotor. Weighing unit with 14 weighing heads, each with a volume of 1.3 liters. Equipped with a buffer hopper to increase packing speed; max. speed of the weighing unit in idle: 120 cycles/min; weighing range: 10–3,000 g; accuracy +/-0.1–2.0 g; all product-contact parts made of SUS304 stainless steel. Brand new and under warranty. Immediately available from Reinbek. Knodpfx Absv Hxz Ieysa Further information on request.

Stanje: novo, Leto izdelave: 2025, Odmerjalnik za suho snov z povratno informacijo o teži (po končanem postopku odmerjanja) prek priključene tehtnice. Avtomatska izvedba z modularnim trakom za transport pločevink, steklenic in posod. Primerno za odmerjanje in polnjenje praškastih izdelkov v pločevinke, steklenice ali druge posode. Upravljanje s PLC in na dotik prek zaslona. Opremljeno s servomotorjem za odmerjalni vijak, senzorjem nivoja, višinsko nastavljivo polnilno glavo in zaščito pred prahom. Knjdpfsw D Elaox Abyea - Specifikacije: Območje odmerjanja: 1-1000 g; Natančnost (odvisno od izdelka in skupne teže): 1-100 g maks. ±2 %, 100-1000 g maks. ±1 %; maks. število ciklov stroja v prostem teku: 25 ciklov/minuto; Prostornina lijaka: 25 l (standardno), 35 l (na zahtevo); Napetost: AC220~380 V, trifazno; Poraba energije: 1,2 kW; Dimenzije stroja: D1500 x Š760 x V1850 mm; Teža: 160 kg.

Stanje: novo, Leto izdelave: 2025, Dozirni stroj za suhte materiale z povratno informacijo o teži (po zaključku procesa doziranja) prek priključene tehtnice. Avtomatska izvedba z modularnim trakom za transport pločevink, steklenic in posod. Primerno za doziranje in polnjenje praškastih izdelkov v pločevinke, steklenice ali druge posode. Nadzorovano s PLC (programirljivo logično enoto) z zaslonom na dotik za upravljanje. Opremljeno s servo motorjem za dozirni vijak, senzorjem nivoja, nastavljivo polnilno glavo po višini in prašno neprepustnim pokrovom. - Specifikacije: Območje doziranja: 10-5000 g (potrebna je menjava dozirnega vijaka); Natančnost (odvisno od izdelka in skupne teže): 1-100 g maks. ±2 %, 100-500 g maks. ±1 %, 500-5000 g maks. ±0,5 %; Največja število ciklov stroja v prostem teku: 25 ciklov/minuto; Prostornina lijaka: 50 l (standardno), 75 l (na zahtevo); Napetost: AC220~380 V, 3-fazno; Poraba energije: 1,6 kW; Dimenzije stroja: D2000 x Š970 x V2030 mm; Teža: 300 kg. Kedpew D Elgsfx Abyjna

Stanje: novo, Leto izdelave: 2025, Linear automatic DUAL auger filler (two filling stations) with weight feedback from a separate weighing unit. SIEMENS PLC-controlled via SIEMENS touchscreen. - Specifications: Hopper volume: 85 liters; Filling weight: 10–5000g; Stainless steel version with servomotor; includes: Free-flow module for improved product flow and dust cover; Packaging accuracy (depending on product and total weight): 0–2% (for 0–100g), 0–1% (for 100–550g), 0–0.5% (for 500g and above) (dependent on product and total weight); Maximum machine cycle rate (idle): 80 cycles/minute; Power: 380V, 3.2kW; Compressed air: 0.05m³/min, 6 bar; Machine dimensions: L2000xW1000xH2100mm; Weight: 400kg. Knodpfx Abjv Nk Nvoyoa The machine/system is also available in additional versions for various packaging sizes and packaging speeds. Please note that our new prices frequently undercut typical used prices. Feel free to inquire and tell us about your packaging application. – We generally have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting at around 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Linear automatic auger filler (screw doser) with weight feedback via separate weighing unit. SIEMENS PLC controlled via SIEMENS touchscreen. Specifications: - Hopper volume: 45 liters - Filling weight: 10–5000g - Stainless steel version with servomotor Knjdpfx Asv Nk Npobyoa - Includes: free-flow module for improved product flow and dust protection cover - Packaging accuracy (depending on product and total weight): 0–2% (for 0–100g), 0–1% (for 100–550g), 0–0.5% (for 500g and above) - Maximum machine cycle rate (idle): 40 cycles/minute - Power supply: 380V, 1.6kW - Compressed air: 0.05m³/min, 6 bar - Machine dimensions: L2000 x W1000 x H2100mm - Weight: 200kg The machine/system is also available in various versions for different packaging sizes and packaging speeds. Please note that our new prices are often lower than the usual prices for used equipment. Simply inquire and let us know your packaging requirements. Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines, we also offer very short lead times, starting from around 3 weeks. All machines are available with a full warranty.

Stanje: rabljeno, Leto izdelave: 2000, Prodano za dijelove, nedostaje ADU kartica. Automatski sustav za testiranje tableta - Laboratorijska mjerna oprema - Alat za tablete Omogućuje testiranje: - Tvrdoće - Promjera - Debljine - Težine Precizna vaga Sartorius WZ64S Raspon vaganja: 10 do 50 g Jedinica: mg / 0,5 mg / 0,1 mg (podesivo) Debljina: Pogon: koračni motor Mjerna metoda: linearni potenciometar Jedinica: mm ili inč Tolerancija: +/- 0,1 mm Tvrdoća: Pogon: koračni motor Knodpfx Abox Rz I Djyoa Mjerenje: mjerni most (mjerna ćelija, lmz) Princip mjerenja: dinamometrijska vaga Jedinica: N, Kp ili Sc Promjer: Pogon: koračni motor Mjerna metoda: koračni motor Jedinica: mm ili inč Raspon: 3 – 18 mm / 3 – 30 mm (ručno) Tolerancija: +/- 0,1 mm Napon: 100 / 240 V, 50 Hz / 60 Hz UTS je univerzalni, potpuno automatizirani sustav za testiranje razvijen za industrijsku upotrebu. Ovaj uređaj je odobreni model iz serije sustava testiranja uspješno korištenih dugi niz godina. Razvijen je u bliskoj suradnji s farmaceutskom industrijom. UTS 4.1 može testirati okrugle, ovalne, četvrtaste i duguljaste tablete, kao i brojne specijalne oblike. Za nježne duguljaste tablete moguće je integrirati dokazani sustav centriranja (OZB). Svi dijelovi koji zahtijevaju čišćenje mogu se brzo i jednostavno ukloniti bez upotrebe alata. Sustav za testiranje moguće je proširiti raznim opcijama poput distributera i/ili sakupljača uzoraka s različitim brojem stajališta. UTS možete koristiti kao laboratorijski tester ili uređaj za online kontrolu spojen na prešu za tablete. Uzimanje uzoraka može se aktivirati izravno na proizvodnom stroju ili putem TTS11 softvera.

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D56L/8403, Številka ponudbe: D56L/8403 Vrsta stroja: Pakirna linija Knedpoxnyh Ijfx Abyea Proizvajalec: WEIGHPACK Tip: Leto izdelave: 1994 Delovno območje: Dimenzije škatle: Lokacija: Pri nas v skladišču

Stanje: zelo dobro (rabljeno), Polavtomatski ovijalec palet Inventarna številka: 3587 Proizvajalec: de Wit Tip: WP 2 Leto izdelave: 2008 * Pozicioniranje vrtljive mize z Fix-Stop * Število ovitij spodaj in zgoraj * Premer vrtljive mize: 1650 mm * Maksimalna višina ovijanja cca 2400 mm Ksdpfx Aeya Iuuobysna * Euro palete in blok palete!!! * Lastna teža cca 500 kg

Stanje: zelo dobro (rabljeno), Avtomatski ovijalec palet s prednapenjanjem folije Inv. št. 3761 Proizvajalec: ProtoWraptor Kodeychv Depfx Abyona Tip: VPT * Pozicioniranje vrtljive mize s fiksnim ustavljanjem * Nastavljivo število ovitkov na dnu in vrhu * Premer vrtljive mize: 2400 mm !!! * Največja višina ovijanja: cca 2800 mm !! * Lastna teža: cca 500 kg * Za euro palete in blok palete!!! * Ekskluzivna rampa!!! * V zelo dobrem stanju

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EFR4AOOS, - Znamka: Graco - Referenca: EFR4AOOS - UPC koda: 755652866732 - Splošna industrija Kjdpfx Asxv Dcrebysna - Sistem za doziranje, mešanje, merjenje in elektronski nadzor, zasnovan za natančen nanos enokomponentnih ali dvokomponentnih materialov, TESNIL IN LEPIL - Uporabe: Vrvice, zalivanje Največji pretok: 3,4 l/min - Največji delovni tlak: 241 barov - 80+80 cc. inox baze - Razmerje pritiska 1:1 - Največja temperatura tekočine: 50 °C - Rabljeni izdelek, popolnoma pregledan - 1 leto garancije - Možnost pošiljanja ali osebnega prevzema v trgovini - DDV 21 % ni vključen - DDV VKLJUČEN. Možna je zahteva za povračilo DDV-ja za podjetja, registrirana v sistemu VIES ali s TAX ID - Carinske in uvozne dajatve krije kupec v primeru uvoza (Incoterm: DAP)

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), The Cyklop CST 940 is a fully automatic stretch film wrapping machine that ensures fast and reliable pallet wrapping at high output volumes. Under the cover, you’ll find an Atlanta Stretch Mytho A – a model renowned for its robust construction and dependable performance. With a capacity of up to 45 pallets per hour, it is an excellent choice for logistics centers, warehouses, and production facilities seeking to combine efficiency with operational reliability. Thanks to its minimal use and excellent condition, this machine offers the feel of a new unit at the price of a used one. The machine is easily operated via a user-friendly 5.7” touchscreen with multiple program options and can be adapted to various load formats and wrapping requirements. Adjustable speeds for both the rotary arm and film carriage, as well as different pre-stretch levels, provide a flexible solution that delivers high performance and secure, stable packaging. Ksdpfow U Rd Usx Abyena The solution can be customized and extended on request, as we can supply additional conveyors of the same model. Compressed air required. Shipping and possible assembly are additional.

Stanje: dober (rabljeno), Leto izdelave: 2015, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, Cheops Tray skrčljiva pakirnica Ksdpfx Abex Dantoysna Proizvajalec: CHEOPS spol. s r.o. TERMOPAK 400TP – do 400 pladnjev na uro Možnost pakiranja pladenj + folija, samo folija ali podloga + folija Za uporabo s pop-lock ali že izdelanimi pladnji – podatke o obstoječem dobavitelju kartona in obstoječih rezalnikih lahko zagotovimo. Dvigala in okvirji za naslednje formate: 200ml steklenice – 24 kos v paketu 250ml steklenice – 24 kos v paketu 330ml steklenice – 12/24 kos v paketu 500ml visoke steklenice (tip 1914) – 12 kos v paketu 750ml steklenice – 12 kos v paketu Dvižne glave za: 500ml steklenice „stumpy“ – 8/12 kos v paketu V uporabi do konca januarja 2026 Uporabljali smo za steklo, z drugimi glavami pa je možno pakirati PET/plastenke ali pločevinke. Prodajamo zaradi povečanja proizvodnih zmogljivosti.

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, skupna širina: 3.642 mm, skupna dolžina: 3.334 mm, vhodna napetost: 400 V, dolžina podajanja os X: 2.900 mm, dolžina pomika po osi Y: 2.600 mm, delovna širina: 2.600 mm, hitrost pomika os X: 80 m/min, hitrost podajanja osi Y: 80 m/min, največja širina rezanja: 2.540 mm, največja višina reza: 20 mm, priključek za stisnjen zrak: 9 letvica, We are selling our Atom FlashCut Fashion 26B All-in-One fully automatic cutting table system. With a usable working area of 2,900 x 2,600 mm, a cutting window of 2,540 x 850 mm, and a separate stacking area of 1,200 x 2,600 mm, the FlashCut 26B offers optimal conditions for efficient workflows. The maximum cutting height of 20 mm allows you to process a wide variety of materials—including multilayer stacks. Two independently operating tool heads ensure high speeds and maximum productivity. Servo drives on the X, Y, and Z axes guarantee precise movements at a travel speed of up to 80 m/min and acceleration of 1G. Intelligent material handling & vacuum technology A continuous conveyor belt transports the material steadily into the processing area. The vacuum table is divided into 300 x 300 mm segments, enabling targeted activation of individual zones. This provides precise material fixation while minimizing energy consumption. Two powerful frequency-controlled vacuum pumps (3–15 kW) automatically adjust their output to the actual demand. The result: secure material hold with energy-efficient operation. Precision through camera & projection technology For optimal material utilization, the system features two cameras with integrated light sources and dimmers to detect irregular material contours—such as with leather hides. Defects can be digitally marked and taken into account during subsequent processing steps. Two high-performance projectors support automatic nesting by projecting cutting contours directly onto the material. In addition, article numbers, sizes, or further markings can also be projected onto the cut parts—ideal for process reliability and traceability. Powerful CNC control & software The system is equipped with a modern CNC controller, including TFT color display, keyboard, and USB interface. An integrated computer with Windows Embedded, Ethernet connectivity, and TeamViewer support ensures easy operation and remote maintenance. The software package includes: - DXF converter for reading and converting CAD files - Interactive layout software - Automatic nesting software - CAD module for creating simple geometries Optionally, the Luxury Nest strategy enhances the system with a specially developed nesting logic for optimizing leather cutting. This takes into account quality zones, defect areas, as well as defined rotation and grouping rules to achieve the highest possible material yield. Versatile tooling The FlashCut 26B is supplied with a multi-tool head as standard. Included are, among others: - Drag knives - Punch tools (various diameters) - Marking tool - Tracing needle - Laser pointer - Knife holder and ejector This makes the system flexible for cutting, marking, and perforating applications. Safety & reliability Kedpfsymn R Nox Abyona A safety monitoring system with light barriers and emergency stop switch ensures maximum operational safety. The machine is CE compliant and designed for continuous industrial operation.