SISTEM MERJENJA EFR 1:1 z 480 V

Graco EFR 1:1 de 480 voltios

Leto izdelave: 2010, stanje: dober (rabljeno), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the operating head and the working area on the machine - Numerical control (CNC) with BIESSE Works software on Windows Pgjdpshknbrjfx Anpsu - Vertical panel positioning with 2 panel clamping vices - Panel feed (in the X-axis direction, on the lower support with rubber rollers), movement of clamping vices (in X-axis) for panel/workpiece fixing WORKPIECE DIMENSIONS (WORKING RANGE): - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm - Thickness Min 8 mm / Max 80 mm WORKING UNITS: - No. 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18000 RPM) - No. 1 circular saw (for grooves), 120 mm diameter (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - No. 1 drilling head for hinge boring - Total installed power: 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Stanje: zelo dobro (rabljeno), Brand: DMTG DALIAN Model: CKE 6180 Z Control: FAGOR 8055 iT Turning diameter: 800 mm Turning length: 2,000 mm Psdpfou U Htcsx Anpogu Height over bed: 400 mm Cross slide travel: 420 mm Longitudinal travel: 1,835 mm Spindle bore diameter: 100 mm Headstock speed: 40–1000 rpm X-axis feed: 0–4000 mm/min Z-axis feed range: 0–8000 mm/min Turret: 4 positions 4-jaw chuck diameter: 400 mm Quill stroke: 260 mm Voltage: 400 V Motor power: 18.5 kW Machine dimensions: 4,500 x 2,000 x 1,800 mm

Stanje: dober (rabljeno), Leto izdelave: 2016, Kontaktirajte za več informacij Psdjy Enr Sopfx Anpegu

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Arburg injection molding machine from 2000. 130 tons clamping force. The machine is delivered fully reconditioned at our facility in Heras (Cantabria). New seals installed in the clamping unit. We can demonstrate the machine in operation. Pedpforxtpdex Anpegu Technical Details CLAMPING FORCE: 1300 kN PLATEN DIMENSIONS: 660 x 840 mm OPENING STROKE: 575 mm MAXIMUM DISTANCE BETWEEN PLATENS: 800/850 mm DISTANCE BETWEEN TIE BARS: 420 x 420 / 470 x 470 mm SCREW DIAMETER: 50 mm INJECTION VOLUME: 353 cm³ INJECTION SHOT WEIGHT: 117 g YEAR OF MANUFACTURE: 2000 INJECTION PRESSURE: 2500 bar

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Prenovljeno: 2026 Podpfx Ansyvwchepjgu Numerično krmiljenje: SIEMENS 840D Tehnične značilnosti Dimenzije Dimenzije mize: NeobveznoŠtevilo T-utora: NedoločenoDimenzije T-utorov: Nedoločeno Gib osi Gib osi X: 10000 mmGib osi Y: 1500 mmGib osi Z: 2500 mmVertikalna zmogljivost (VC): 0 / 2500 mm (nastavljivo) Rezalna glava Vrsta glave: Univerzalna, samodejno se premika UAD (0,1º)Sistem vpenjanja orodja: HidravličniStožčast nos: ISO 50 (DIN 69871) / Vijak za vlečenje: DIN 69872Območje hitrosti: 20 - 6000 vrt/minMoč vretena: 30 kW Hitrosti podajanja Hitra hitrost podajanja (X / Y,Z): 30000 mm/min Teža in dimenzije Maksimalna teža na mizi (kg/m2): NeobveznoPribližna teža stroja: 70000 kgPribližne dimenzije stroja: 17560 x 12800 x 4270 mm Dodatna oprema Zaščita: nihajna z avtomatskimi vrati in obodno mrežasto ograjoAvtomatski menjalnik orodja: ATC80 z električnimi motorjiTransportni sistem za odrezke: 1 sprednji vzdolžni in 1 prečniElektronsko upravljalno kolo: 6FX2007-1AE14 SiemensHladilno sredstvo: zunanje, notranje, visokotlačno skozi vretenoKabineta operaterja: nastavljiva po vertikalni smeri Druge tehnične značilnosti 2 ROTIRAJOČE MIZE:Model: DEMMELER DRLTS1800Površina mize: 2400 x 1800 mmMaksimalna obremenitev na mizi: 40 tŠtevilo T-utorov: 9Dimenzije T-utorov: 22 mmRotirajoča os: HidrostatičnaMaksimalna hitrost (S1/S6): 3,4 / 5,4 vrt/minVpenjalni tangencialni navor: 175000 NmOs W: 1500 mm.Maksimalna hitrost podajanja: 20000 mm/min.Število vodil (os W): 4 Pogoji prodaje Garancija: 6 mesecev za mehanske deleCena in pogoji prodaje: Na zahtevo Poglejte vse tehnične značilnosti

Stanje: dober (rabljeno), KONDIA B 1370 Machining Centre Table size: 1350 x 700 mm X-axis travel: 1300 mm Podpfxjug T E Ne Anpsgu Y-axis travel: 700 mm Z-axis travel: 700 mm Spindle speed: 10,000 RPM Motor power: 21 kW Control unit: Heidenhain ITNC 530 i Tool capacity: 22 Tool holder: ISO 40 Electronic handwheel: Yes Through-spindle coolant: Yes Spindle chiller: Yes Chip conveyor: Yes Dimensions with chip conveyor (W x L x H): 3097 x 4650 x 3561 mm Weight: 13,500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, TECHNICAL DATA Brand: FANUC Model: ROBODRILL α-D21LiA5 Year: 2013 CNC control: FANUC 31i-MODEL B5 Serial number: P135 YH478 TABLE DIMENSIONS Table size: 850 x 410 mm Load capacity: 300 kg T-slot pitch: 125 mm T-slots: 3-14 mm TRAVELS Longitudinal travel X: 700 mm Longitudinal travel Y: 400 mm Vertical travel Z: 330 mm Distance from table to spindle nose: 150 to 480 mm FEEDS Rapid traverse X,Y,Z: 54 m/min Cutting feedrate: 1 to 30 m/min MOTOR Drive motor: 11kW (1min) / 3.7kW Continuous Feed motors X,Y,Z: α8/4.000is (2.9 kW) Pgodoy At Aqspfx Anpju TURRET Taper: MAS BT 30 Drawbar type: MAS P30T-1 (45º) Distance from column to spindle centerline: 400 mm ACCURACY Positioning accuracy: 0.006 mm Repeatability: ±0.004 mm Tool storage: 21 Max. tool length: 250 mm Tool change time: Approx. 1.8 s SPINDLE Spindle speed range: 100 to 10,000 min⁻¹ Spindle taper: 7/24 No. 30 Internal coolant MACHINE SIZE Machine height: 2,236 ± 10 mm Floor space: 2,115 x 2,040 mm Machine weight with control unit: Approx. 2,100 kg POWER SUPPLIES Electrical supply: 11 kVA Compressed air supply: 0.35 to 0.55 MPa (gauge pressure) (0.5 MPa recommended) 0.15 m3/min (150 l/min) (at atmospheric pressure) ACCESSORIES Original Fanuc DDR 4th axis rotary table (New price €18,000) Zero Point clamping system by Schunk, reference NSE plus 138-V1, installed on the rotary (New price €2,100) Two Schunk KONTEC KSM2 90-400 vices (New price €2,000 each)

Stanje: rabljeno, Teža . kg Vpenjanje MK . Tehnični podatki so podatki proizvajalca oz. upravljavca, zato so za nas nezavezujoči. Pridržujemo si pravico do predhodne prodaje; veljajo izključno naši splošni pogoji poslovanja in prodaje. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščne površine, dvigovalna zmogljivost 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Želite prodati stroje, proizvodne linije ali svoje podjetje? Obrnite se na nas. Dodatne ponudbe najdete na naši spletni strani. Pgjdpfx Aoyqvk Eonpeu Ogledi so možni po dogovoru. Veselimo se vašega obiska. Vaša Markus Hirsch ekipa

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: SO127, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it achieves up to 13,000 bottles per hour and supports scalable outputs for medium- to high-speed lines. The machine is optimized for PET containers and is suitable for a range of beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones’ engineering ensures outstanding reliability, consistent bottle quality, and smooth changeovers. Designed as a versatile component for a used bottling line or as a stand-alone blow molder, this pre-owned system delivers precise preform handling, stable heating, and efficient blow performance. It features an Alaska neck finish, an 8-cavity configuration, and a clockwise operating direction, making it a proven choice for beverage manufacturing and industrial packaging applications where uptime and repeatability are critical. Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Pgsdpsx H Tf Tefx Anpeu Year of Manufacture: 2004 Configuration: Rotary Maximum Speed: 13,000 bph Container Material: PET Current Bottle Format: 0.5L No. of Cavities: 8 Thread/Neck Finish: Alaska Maximum Container Height: 350 mm No. of Grippers (infeed/outfeed): 6 No. of Mandrels: 180 Operating Direction: Clockwise Operating Height: 1470 mm Power Supply: 400 V, 3-phase, 50 Hz Operating Current: 331 A Operating Pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation and Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and rapid diagnostics. The control architecture supports stable preform heating profiles, precise blow cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are built into safeguard and access points to support consistent production with minimal downtime. Production Line Integration Capabilities This blow molding machine can be operated as a stand-alone unit or seamlessly integrated into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Changeovers are streamlined around the 8-cavity rotary platform, while the Alaska neck finish provides compatibility with a wide range of closures and filling monoblocks throughout the beverage production process.

Leto izdelave: 2003, stanje: rabljeno, Montažna naprava SCHNELL Idea 12/25 Stroj je bil pred kratkim razstavljen, v odličnem stanju. 3 odvijalniki Podpfx Aoymb Nrjnpogu Odvijalniki: 3