Advanced Energy Industries Napajalnik nakup rabljenega (30.588)

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 16.0 mm Frame gap: 3,100 mm Total power requirement: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,200 x 2,050 x 2,100 mm Technical Data: Sheet thickness: 16 mm Cutting length: 3,200 mm Cutting angle: 2° Hjdpod Ab Hlofx Amhjnr Backgauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,200 mm Width: 2,150 mm Height: 2,200 mm Weight: 12,900 kg Equipment: Swing beam shear design NC preselection control ELGO P40 Touch with backgauge and blade gap adjustment via controller (front access) Motorized backgauge up to 1,000 mm Clear control panel mounted on swing arm Hydraulic hold-downs mounted close to the cutting edge Foot switch Blade gap adjustment Cutting line illumination Wide support table with ball inserts Foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy blade changing and regrinding Adjustable cutting length for economical processing Lower blade, 4-fold usable Upper blade, 2-fold usable Qualified customer service Operating manual in ENGLISH Machine and equipment in compliance with CE regulations

Stanje: novo, Dimensions (LxWxH): 1520 x 950 x 1780 mm Approx. weight: 1,440 kg Total power requirement: 4 kW Square steel: 35 mm Round steel: 40 mm Punching force: 60 t Throat depth: 220 mm Flat bar shear: 200 x 20 mm or 300 x 15 mm Notching (thickness x width x depth): 10 x 42 x 100 mm Punching – round: 28 x 15 mm or 38 x 11 mm or 110 x 3 mm Angle iron cutting 90° or 45°: 120 x 120 x 12 mm or 80 x 8 mm - With single cylinder - 5 workstations: punching station, notching station, and shear stations for flat, bar, and angle steel. Scope of delivery: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for set-up and operation modes - Support table with stops at notching and flat steel stations - Support table with stops at punching station - CE version PROPERTY DESCRIPTION / VALUE Punching force: 60 t Throat depth: 220 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Max. sheet thickness Ø 28 x 15 mm Working height: 955 mm Flat bar shear Cutting capacity: 300 x 15 mm / 200 x 20 mm Angle steel 45° (1 leg): 80 x 80 x 8 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 35 mm Material thickness: 10 mm Hjdpfsd Ab Hyox Amhsnr Width: 1,520 mm Depth: 950 mm Motor output: 4.0 kW Mains voltage: 400 V, 50 Hz Height: 1,780 mm Weight: 1,440 kg

Stanje: novo, Dolžina upogibanja: 3100, Debelina pločevine: 4, Premer zgornjega valja: 170 Standardne lastnosti: Zadnji valj z motorjem Naprava za stožčasto upogibanje Hjded Ab Nmjpfx Amhenr Kaljeni in polirani valji Ohišje iz jekla ST 52 Zgornji valj se po upogibanju bočno odpira za lažje odstranjevanje materiala Asimetrična zasnova za popolno upogibanje Za popoln rezultat sta zgornji in spodnji valj gnana z elektromotorjem z zavoro in planetnim zobniškim pogonom Ustreza CE-standardom Prenosna upravljalna konzola za upravljanje stroja z različnih mest OPTIONALNO EnotaKos Neto cena (€) Spodnji valji z motorjem1 1.205 € Digitalni prikazovalnik za zadnji valj1 815 € Podaljšani valji1 788 €

Stanje: novo, Sheet thickness: 40 Bending length: 3100 Top roller diameter: 460 Technical specifications: - Hardened and polished rollers - Complete frame made of ST-52 steel Hsdpfod Ab Rfjx Amhonr - The 4 rollers are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positioning - Hydraulic adjustment - Top and bottom rollers driven by hydraulics and gearbox - Vertical movement of the lower roller is hydraulically actuated - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed EUR 5,858 - Material feed table EUR 5,100 - Oil cooler STD - Central support EUR 18,750 - Side supports EUR 15,000 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roller support system (for special customer requirements) We have a large number of references!

Stanje: novo, Sheet thickness: 35 Bending length: 3100 Top roll diameter: 460 Technical data: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically powered top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment Hnjdpfx Amsd Ab Rgshjr - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically powered - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed EURO 5,325 - Material feed table EURO 3,896 - Oil cooler STD. - Central support EURO 12,058 - Side supports EURO 11,258 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Stanje: novo, Sheet thickness: 10 mm Bending length: 4100 mm Top roll diameter: 330 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically operated top cover for easy removal of material - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movements of the lower roll are hydraulically driven - Mobile control console - In compliance with CE standards Hnjdpsd Ab Ryjfx Amhor Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 10,250 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Stanje: novo, Sheet thickness: 8 mm Hedsd Ab R Eopfx Amhenr Bending length: 4100 mm Top roller diameter: 300 mm Technical Data: - Hardened and polished rollers - Complete frame made of ST-52 steel - Four rollers arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers powered by hydraulics and gearbox - Vertical movement of the lower roller is hydraulically powered - Movable control panel - Compliant with CE standards Options: - Variable rotation speed: EUR 4,681 - Material feed table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,660 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roller - Adjustable lower roller support system (for special customer requirements) We have many references!

Stanje: novo, Sheet thickness: 8 mm Bending length: 2600 mm Top roll diameter: 210 mm Technical specifications: - Hardened and polished rolls - Full body made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated cover for easy material removal - Digital display for lower and side roll positions - Hydraulic positioning - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movements of the lower roll powered hydraulically - Movable control panel - In compliance with CE standards Options: - Variable rotation speed: EUR 4,681 - Material feeding table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 6,600 Hnodod Ab Sfepfx Amhjr - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Stanje: novo, Sheet thickness: 8 mm | Bending length: 2100 mm | Top roll diameter: 190 mm Technical specifications: - Hardened and polished rollers - Complete body made of ST-52 steel - The 4 rollers are arranged symmetrically - Hydraulically operated top cover for easy material removal Hedpfx Amed Ab Siehenr - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically operated - Mobile control console - In compliance with CE standards Options: - Variable rotation speed: EUR 4,109 - Material feeding table (1000x2000 mm): EUR 2,600 - Oil cooler: EUR 1,040 - Central support: EUR 6,250 - Side supports: EUR 3,600 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Stanje: novo, Bending length: 4100 mm Sheet thickness: 8 mm Top roll diameter: 300 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel Hjdpfx Asd Ab S Semhenr - Rolls mounted with bearings - Top roll cover hydraulically openable and lockable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically driven Options: - Variable rotation speed EURO 4,682 - Sheet feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 9,660 We have many references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 6 mm Upper roll diameter: 210 mm Technical specifications: Hnjdpfed Ab Tkox Amher - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console - Rolls mounted with bearings - Upper roll cover, hydraulically openable and lockable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements are hydraulically driven Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 7,070 We have many references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 10 mm Top roller diameter: 210 mm Technical specifications: - Hardened and polished rollers - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rollers - Portable control panel - Rollers are mounted on bearings - Top roller cover, hydraulically openable and closable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed EUR 4,682 - Material feed table on request Hedjd Ab Tmspfx Amhsnr - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 4,600 We have numerous references!

Stanje: novo, Sheet thickness: 2.5 mm Bending length: 1550 mm Top roll diameter: 90 mm Technical data: - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roll can be swung out to easily remove the material Hnjdpfjd Ab Txex Amhor - Cone bending device - Movement of rear roll and lower roll manually adjustable up and down with handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roll EURO 825,-- - Digital display for rear roll position EURO 1,010,-- - Body cover EURO 362,-- - Hardened rolls EURO 650,-- We have numerous references!

Stanje: novo, Bending length: 1050 mm Sheet thickness: 3.3 mm Top roll diameter: 90 mm Technical specifications: - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roll can be opened to the side for easy removal of the material - Cone bending device - Movement of the rear and bottom rolls up and down manually via handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roll - Digital display for indicating the position of the rear roll Hodpjd Ab T Ajfx Amhonr - Body cover EURO 274,-- - Hardened rolls EURO 480,-- - Variable rotation speed We have many references!

Stanje: novo, Bending length: 1250 mm Sheet thickness: 2 mm Upper roll diameter: 75 mm Technical data: - Cast iron body - Manual or motorized (optional) bending - After bending, the upper roll can be swung out to easily remove the material - Cone bending device - Movement of the rear roll and lower roll is manual via handwheel - Portable control panel Hnsdod Ab T Espfx Amhjr - In compliance with CE standards Options: - Motorized rear roll - Digital display showing the position of the rear roll - Body cover EUR 314,-- - Hardened rolls EUR 465,-- - Variable rotation speed We have numerous references!

Stanje: novo, Sheet thickness: 2 Bending length: 1250 Top roll diameter: 75 Technical specifications: Hnedpfxod Ab T Hs Amher - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roll can be opened to the side for easy removal of the material - Cone bending device - Movement of the rear roll and lower roll manually up and down via handwheel - Portable control panel - In compliance with CE standards Options: - Rear roll with motor EURO 825,-- - Digital display for rear roll position EURO 1,010,-- - Machine body cover EURO 314,-- - Hardened rolls EURO 465,-- We have numerous references!

Stanje: novo, Sheet thickness: 1.8 mm Bending length: 1050 mm Top roll diameter: 70 mm Sheet length: 1050 mm Hedjd Ab T Sepfx Amhsnr Details: - Cast iron frame - Motorized bending - Conical bending device - Manual adjustment of the rear and lower roll via handwheel - Mobile control panel - Compliance with CE standards Options: - Rear roll with motor: €825 - Digital display for rear roll position: €1,010 - Frame cover: €274 - Hardened rolls: €392

Stanje: novo, Shaft diameter: 30 mm Upper roller diameter: 148 mm Lower roller diameter: 118 mm Working speed: 2-4 m/min Motor power: 0.7 - 0.85 kW Length: 600 mm Width: 800 mm Approx. weight: 220 kg Height: 1450 mm Technical specifications: - Steel frame - Two lower rollers are driven - Direct drive via gears - Upper roller runs idle (free-rotating) - Hardened rollers - Roller shafts are hardened and ground Hnjdsd Eqq Aopfx Amhsr - Dual-speed motor - Standard rollers - Adjustable guide rollers - Horizontal and vertical working position Options: - Digital display EUR 700 - Angular side guide rollers EUR 1,100 - Dual speed STANDARD - Brake motor EUR 150 PK 30 File Type Size Min. Dia Notes 150x10 20x6 1800 300 Standard Rolls 280x15 30x6 700 400 Standard Rolls 330x30 10x10 900 200 Standard Rolls 4Ø 30 Ø 10 900 200 Optional Rolls 5Ø 60x1.5 Ø 25x1.5 1000 600 Optional Rolls 1 1/2”x2.9 1/4”x1.8 600 300 Optional Rolls 750x30x3 40x20x2 1200 800 Optional Rolls 840x3 30x2 1200 800 Optional Rolls 940x40x5 30x30x4 600 300 Optional Rolls 1035x35x5 30x30x4 600 400 Optional Rolls 1150x6 20x3 600 400 Standard Rolls 1250x6 20x3 600 400 Standard Rolls 1350x6 20x3 600 400 Standard Rolls * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities specified for 260 N/mm² plate yield strength

Stanje: novo, Pressure: 60 Bending length: 2550 mm Distance between housings: 2100 mm Installation height: 550 mm Stroke (max.): 270 mm Throat depth: 450 mm Dimensions (LxWxH): 3220 x 2250 x 2560 mm Weight approx.: 5200 kg Motor power: 5.5 kW Standard equipment: KK-Industries has participated in production and is now manufacturing press brakes and guillotine shears based on its own concepts. We have assembled a high-quality model for the European market. The CNC press brake KLETZER Maxima-EUROPA XL, made in Turkey Model: KLETZER Maxima-EUROPA XL The powerful KLETZER Maxima-Europa XL press brake stands out for its high precision, accuracy, and versatile range of applications. The KLETZER Maxima-Europa XL offers a very large installation height and correspondingly large stroke (cylinder travel). The throat depth is also above average, resulting in minimal limitations when handling various workpieces. We insist on quality, which is also reflected in the control system. As the standard control, we have installed a high-quality Italian 10 2 D controller, which is exceptionally easy to program. Additionally, the KLETZER Maxima-Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all operated via the controller. We also make no compromises with the upper tool and die, equipping the KLETZER Maxima-EUROPA XL CNC press brake with premium quality tools from EUROSTAMP Italy or Rolleri Italy. A machine is only as good as its service, which is why we focus on highly qualified personnel with extensive experience in CNC sheet metal processing. CNC axes: Y1, Y2, X Controller: 2D Top tool: 135.75.R08 Bottom tool: 4V 60x60 85° Backgauge with dual linear guides and ball screw drive Motorized crowning device with CNC control 2 heavy duty front support arms, height-adjustable on linear guides Laser safety device on the upper beam CE safety equipment Various options available MAXIMA 2560 TECHNICAL DATA Hnodpfed I Annsx Amhsr Type: MAXIMA 2560 Bending force (ton): 60 Bending length (mm): 2550 Distance between columns (mm): 2100 Stroke (mm): 270 Daylight (mm): 550 Throat depth (mm): 450 Motor power (kW): 5.5 Approach speed (mm/sec): 140 Bending speed (mm/sec): 10 Return speed (mm/sec): 120 Travel in X axis (mm): 650 Crowning: Manual Height (mm): 2560 Width (mm): 2250 Length (mm): 3220 Weight (kg): approx. 5200 KK-Industries GmbH There is something for everyone!

Stanje: novo, Pressure: 20 Bending length: 900 mm Frame width: 900 mm Hjdpfx Amsd H Hh Djhonr Installation height: 325 mm Stroke length (max.): 150 mm Dimensions (LxWxH): 1760 x 1280 x 2190 mm Approx. weight: 1950 kg Motor power: 3.8 kW Electric ball screw CNC press brake KK Industries Model REVOLUTION B-Servo 900 mm x 20 t Standard equipment: KK-Industries is the general representative of the DENER group. We have assembled a high-quality model for Europe. The CNC Servo Electric Press Brake, KK-Industries made by DENER: Technological Advantages: Model REVOLUTION B-Servo 900 mm 20 t - High speeds with ball screw drive - The CNC servo electric press brake stands out for its high precision, accuracy, and versatile application possibilities - 100% electric, 0% hydraulic oil - Up to 40% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter operation - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Technical Specifications Bending Length (B): 900 mm Bending Capacity (Pressing force): 20 tons Maximum Stroke: 150 mm Daylight Opening (Q): 325 mm Approaching Speed: 150 mm/s Bending Speed: 20 mm/s Return Speed: 150 mm/s Power: 3.8 kW Weight: 1950 kg Overall Length (A): 1760 mm Width (C): 1280 mm Height (D): 2190 mm KK-Industries GmbH There's something for everyone!

Stanje: novo, Working area: 2000 x 6000 mm Loading capacity: 1450 kg X-axis travel: 2020 mm Y-axis travel: 6050 mm Laser power: 3 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Weight approx.: 11,500 kg Dimensions (LxWxH): 10,000 x 4,400 x 2,120 mm The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. This is a laser cutting machine with high efficiency and top-tier standards. It supports laser power up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used for manufacturing agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and systems. It is an ideal cutting machine for anyone looking to outsource work. Wireless remote control allows for easy blowing, cutting, pausing, calibration simulation, and more. The included standard nesting software program enables extremely fast part layout and cutting preparation with minimal operator input. Flycut functionality is also available. Thanks to the double exchange table, you can continue cutting without downtime. All our machines are manufactured according to European standards and are CE-certified. Our FLC-type machines include nozzle cleaning and a dual-camera system. Hodpfx Aeruwb Uomhenr Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head is equipped with autofocus, an active anti-collision system, and an auto-view function that detects obstacles and adjusts its position automatically. Cutting heads feature automatic cooling. The bridges used in all our machines are made from single-piece welded aluminum alloy sheet construction. This one-piece design ensures rigidity and prevents deformation under impact, overlap, or load. Additionally, the structure is three times lighter than steel profile bridges, enabling higher speeds and acceleration with lower motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC controller - Flycut functionality - Nozzle and lens starter kit - Workpiece debris drawers - Automatic table exchanger - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote control - Automatic lubrication system - Dual camera

Stanje: novo, Pressure: 60 Motor: 11 Installation height: 450 mm Max. stroke length: 400 mm Table size: 600 x 500 x 80 mm Ram surface: 600 x 500 x 90 mm Table height: 850 mm Dimensions (L x W x H): 1,300 x 2,000 x 2,700 mm Weight approx.: 4,000 kg Oil fill: 200 L Control / key switch: 1. Setup mode, manual, without light sensor (max. 10 mm/sec speed) 2. Automatic mode (at full speed) with light sensor Main cylinder: Ø 150 mm Auxiliary cylinders: 2 pcs Ø 60 x 40 mm Auxiliary guide: 2 pcs Ø 40 mm Motor: 7.5 kW / 11 hp (IE3) Pump: 18 cc – 26 L / ASC Speed: advance 110 mm/sec – return 120 mm/sec; pressure: 11 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 600 x 500 x 80 mm (with T-slots) Ram plate: 600 x 500 x 90 mm (with T-slots) Table height: 850 mm (floor to top edge of table) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10–60 tonnes) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Hnedemmuq Iepfx Amher Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC: SICK Light sensors: SICK 700 + 150 mm Linear encoder for stroke length setting 7” PLC display – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for malfunctions (visual & audible) Double work area lighting 8 free I/Os on the PLC for external connections The press meets the Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating instructions & parts list (German) With side safety door (doors can be slid back)

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 10 mm Total power requirement: 11 kW Weight approx.: 8,100 kg Dimensions (LxWxH): 4,000 x 1,950 x 1,900 mm Technical Data: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 11 kW Length: 4,000 mm Width: 1,950 mm Height: 1,900 mm Weight: 8,100 kg Equipment: Swing beam design NC preset control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the controller at the front Motorized backgauge up to 1,000 mm Clearly arranged control panel mounted on a swing arm Hydraulic hold-downs arranged close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball inserts Foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy replacement and regrinding of blades Adjustable cutting length for economical processing Bottom blade with 4 usable cutting edges Top blade with 2 usable cutting edges Qualified customer service Hnsdpfx Asd Ab Hnomhor Operating manual in ENGLISH Machine and equipment in accordance with CE regulations

Stanje: novo, Dimensions (LxWxH): 1500 x 950 x 1680 mm Weight approx.: 1,165 kg Hnjdpfxed Ab Hzs Amhjr Total power requirement: 4 kW Square steel: 25 mm Round steel: 30 mm Punching force: 45 t Throat depth: 220 mm Flat bar shear: 200 x 15 mm or 300 x 12 mm Notching (thickness x width x depth): 8 x 35 x 75 mm Punching - round: 22 x 15 mm or 38 x 8 mm or 100 x 3 mm Angle steel cutting 90° or 45°: 100 x 100 x 10 mm or 70 x 6 mm - Single cylinder model - 5 workstations: punching, notching, flat, bar, and angle steel cutting stations. Features: - Hydraulic and electrical components from renowned manufacturers - Foot pedal - CE-compliant version - Technical documentation - Selector switch for setup and operating mode - Support table with stops at notching and flat bar station - Support table with stops at the punching station Punching force: 45 t Throat depth: 175 mm Stroke: 50 mm Strokes per min. (at 20 mm stroke): 20 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Flat bar shear cutting capacity: 300 x 12 mm / 200 x 15 mm Angle steel 45° (single leg): 70 x 70 x 6 mm Angle steel 90°: 100 x 100 x 10 mm Blade length: 316 mm Round: 30 mm Square: 25 mm Material thickness: 8 mm Width: 1,430 mm Depth: 950 mm Motor power: 4.0 kW Mains voltage: 400 V / 50 Hz Height: 1,680 mm Weight: 1,165 kg

Stanje: novo, Bending length: 3100 mm Sheet thickness: 6 mm Top roll diameter: 200 mm Hnedpfjd Ab Nfox Amhsr Technical specifications: - Rear roll motorized drive - Cone bending device - Hardened and polished rolls - Complete frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearboxes - Portable control panel - Compliant with CE standards Options: - Bottom roll driven by electric motor: EUR 2,200 - Digital display for rear roll position: EUR 1,010 - Extended rolls: EUR 966 - Profile rolls: EUR 1,190 We have numerous references!