3-valjni stroji za valjanje pločevine z električnim pogonom

KK-Industries CY 75-12/1.5 with motor

Stanje: novo, Ostas 3-Roll Plate Bending Machine SBM 1270 x 95 Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Digital display Features: • Asymmetrical 3-roll plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swivable upper roll • Cone bending device • Foot pedal Isdpjg Tzbhjfx Al Njia Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (L x W x H): 2100 x 760 x 1250 mm • Weight: 470 kg

Leto izdelave: 1960, stanje: dober (rabljeno), številka stroja/vozila: 970015, Load capacity with faceplate in horizontal position: 10 t Load capacity with faceplate in vertical position and center of gravity at 300 mm: 10 t Load capacity with faceplate in vertical position and center of gravity at 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically infinitely variable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Iisdpfecblc Sox Al Noa Swivel time for full swivel range upwards: 140 s Swivel time for full swivel range downwards: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Leto izdelave: 2024, stanje: novo, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Iiodpeftdh Iefx Al Noa Additional machines are available for demonstration at our location in Staufenberg. Further information is available upon request.

Stanje: pripravljen za uporabo (rabljen), An envelope printing machine Winkel + Dünnebier 26 FF is available. An on-site inspection is possible. Iiedpjtq Hbfsfx Al Nsa

Leto izdelave: 1978, stanje: rabljeno, Pressure 100 t Outreach 380 mm Stroke 400 mm Drive power 22 kW Installation height 600 mm Ram surface 600x500 mm Table surface 720x600 mm Machine weight approx. 9 t Two-hand operation, Stroke and pressure shut-off, Iijdpelp U Dpjfx Al Noa Pressing time

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, CENTRIFUGALNA SUŠILICA VSD500 Iijdpfxeixldvj Al Nja Napredna centrifugalna sušilica za povrće i salatu s ergonomskim dizajnom i ciklusom suprotnog okretanja. Ovaj stroj učinkovito suši salatu, povrće, voće i drugo, pri čemu čuva kvalitetu i produžuje svježinu proizvoda. Model VSD500 ima otvorenu konstrukciju radi lakšeg čišćenja, bez teško dostupnih mjesta i navoja u kojima se može skupljati prljavština, a praktičan mehanizam za zaključavanje poklopca smješten je na stražnjoj strani uređaja. Tijekom ciklusa centrifuge smjer okretanja se promjenjuje, čime dodatno olakšava odvajanje proizvoda i omogućava učinkovitije otjecanje vode putem sistema s priključcima na iglične nosače koji reguliraju brzinu košare. Nadogradite svoju preradu hrane s VSD500 za vrhunsku učinkovitost i superiornost u sušenju proizvoda. GLAVNE PREDNOSTI Učinkovito sušenje: Sušilica VSD500 s ergonomskim dizajnom i suprotnim okretanjem osigurava brzo i ravnomjerno sušenje salate, povrća, voća i ostalog. Očuvanje kvalitete: Napredna tehnologija omogućava dulje zadržavanje svježine i produljuje rok trajanja proizvoda. Jednostavno čišćenje: Otvoreni dizajn centrifuge omogućava brz i lagan pristup za čišćenje i održavanje. Higijenska izvedba: Izvedba bez vijčanih spojeva u radnom prostoru sprječava zadržavanje prljavštine i omogućuje higijenske uvjete rada. Praktično zaključavanje poklopca: Mehanizam za zaključavanje poklopca smješten na stražnjoj strani olakšava svakodnevno korištenje. Poboljšana odvodnja i rotacija: Reverzibilni ciklus okretanja poboljšava odvajanje proizvoda, dok sistem s igličnim prihvatom košare osigurava optimalnu brzinu i učinkovito otjecanje vode.

Stanje: novo, Fastech 3-Roller Plate Bending Machine FRM 1250 x 90 Technical Specifications: Special equipment included in the price: - Hardened rollers - Motorized rear roller adjustment - Digital display Sheet width: 1250 mm Sheet thickness max.: 3.0 mm Sheet pre-bending thickness: 2.5 mm Roll length: 1250 mm Roller diameter: 90 mm Ijdpehzq Dqefx Al Nsia Smallest bending diameter: 130 mm Weight: 500 kg Dimensions (LxWxH): 1950 x 900 x 1130 mm Motor: 1.1 kW Features: - Electrically driven upper and lower rollers - Swiveling upper roller - Conical bending device - Asymmetric roller arrangement - Self-braking main motor - Separate control and operating panel - Safety rope All values based on St-37 / 240 N/mm² CE-marked

Stanje: novo, Leto izdelave: 2025, najv. debelina jeklene pločevine: 3 mm, - Capacity 1070 x 3 mm - Roll diameter 90 mm - Electrically adjustable rear roll - Digital display - Hardened rolls - Capability for conical rolling Iedpfx Asi E Tzqsl Nsia - Swiveling top roll - Brake motor - Foot control - Emergency stop - Documentation - 400V

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Pressure: 85.0 t Bending length: 2050 mm Distance between uprights: 1750 mm Throat depth: 410 mm Stroke: 365 mm Installation height: 535 mm Approach speed: 200 mm/sec Working speed: 1.0 - 10.0 mm/sec Return speed: 135 mm/sec Back gauge – adjustable, max.: 600 mm Table width: 120 mm Working height: 1050 mm Operating hours: 28,500 h Oil capacity: 200 l Operating pressure: 340 bar Total power requirement: 14.0 kVA Machine weight approx.: 9,050 kg Dimensions (L x W x H): 2680 x 2100 x 2885 mm - With increased installation height / piston stroke - In very well-maintained condition (!!) - Only approx. 28,500 operating hours - In inspected condition – with machine video – ?v=ZuwyPKJSYLw Iodpoxaa Urefx Al Njia Equipment: - CNC electro-hydraulic press brake - Including DELEM CNC controller * Swiveling control panel at the front left - CNC-controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back gauge (X axis) - CNC electro-motorized height adjustment of the back gauge (R axis) - CNC electro-motorized adjustment of the gauge fingers (Z axes) - CNC pneumatic die shift (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic lower tool clamping - 1x movable two-hand / foot control - 2x front, robust support arms incl. “Sliding System” - Side guarding (swiveling doors) - Rear guarding (swiveling doors) - Press brake tool storage cabinet (front right, side) - Original operating manual + circuit diagram etc. Further technical data: - Approach speed X axis: 500 mm/sec - Approach speed R axis: 300 mm/sec - Approach speed Z axis: 1,000 mm/sec - Travel range X axis: max. 600 mm - Travel range R axis: max. 250 mm

Stanje: novo, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820x610 mm Cutting range at 45 degrees: round 550 mm Cutting range at 45 degrees: square 550 mm Cutting range at 45 degrees: flat 550x600 mm Cutting range at 60 degrees: round 370 mm Cutting range at 60 degrees: square 370 mm Cutting range at 60 degrees: flat 370x600/450 mm Iiodpfx Asfg E Hmjl Nea Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double-mitre band saw for rapid cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, featuring large-radial center positioning. The work table is mounted with high-quality preloaded bearings to ensure very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning device, is equipped with “dual-side opening grippers” which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is structurally separate and guided via ball-bearing linear rails, a precision-ground rack, and a robust, frequency-driven gear motor.