3-valjni stroji za valjanje pločevine z električnim pogonom

KK-Industries CY 90-15/2.5 with motor

Stanje: novo, Leto izdelave: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. intermediate lacquer sanding setup Special price for demonstration unit – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Consistent working height thanks to upper section adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller of proven hardness - Infinitely variable height adjustment of contact roller per abrasive scale - Electric lifting/lowering of the contact roller according to selected unit - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubberized pressure rollers between sanding units and at outfeed Hnodpfek Dpp Ssx Agijk - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, tracking, and oscillation - Compressed air consumption approx. 2 l/min - Optimum safety with automatic instant stop and disc brake in case of belt break, etc. - Workpiece feed 2.2 kW with transport belt and drive roller - Vacuum device for entire worktable with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across whole working width - Over-thickness protection with immediate feed stop and lift-off mechanism - Infinitely variable chip removal adjustment - Electronic feed adjustment on control panel, stepless 3 - 15 m/min - PLC control with teach-in memory function - Pneumatic belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: Fully automated fast setup and feed activation - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 kW - Sanding belt dimension 1350 x 2000 mm Perfect - Equipment Features: - High-quality swiveling plexiglass control panel - 10" touch screen - Industrial control system - Automatic pressure regulation and memory for sanding pad elements - Electronic compensation of abrasive belt grit size - Job and operating hour counters Lacquer equipment - Infinitely variable sanding belt speed on 2nd unit - Blast nozzles for sanding belt cleaning of 2nd unit, operation-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with the machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-blow-off with fan Location: 54634 Bitburg – Immediately available –

Stanje: novo, Ostas 3-Roll Plate Bending Machine SBM 1270 x 95 Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Digital display Features: Hnjdpjg Tzbhofx Agiok • Asymmetrical 3-roll plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swivable upper roll • Cone bending device • Foot pedal Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (L x W x H): 2100 x 760 x 1250 mm • Weight: 470 kg

Stanje: novo, Dimenzija (D x Š x V): 1.630 x 700 x 1.200 mm Teža ca.: 480 kg Skupna potrebna moč: 1,1 kW Upogib: 2 Debelina pločevine: 3 mm Dolžina pločevine: 1.050 mm Tehnični podatki Valjčna naprava za pločevino Premer valja: 90 mm Hitrost valjanja: 6 m/min • Asimetrična razporeditev valjev Hjdpfx Asd Eqqqsgijnk • 2 valja gnana s pomočjo zavornega motorja • Nastavitev zadnjega valja z ročnim kolesom • Zgornji valj izmenljiv • Naprava za konusno valjanje • Dvojna nožna stikala za desni-levi tek • Spodnji in zadnji valj z utori za žico • Navodila za uporabo v NEMŠČINI DODATNO: kaljeni valji EURO 900,--

Stanje: rabljeno, Leto izdelave: 2024, Row loosener HD narrow coulter, rear lighting for road travel / reinforcement plates KG 6002-2 tine set "Griff Super" PTO shaft Bondioli & Pavesi / manual working depth adjustment / toothed packer roller PW 3000-600 / support arms for KG 02-2 mounting Hnsdpfx Asrxurmogiok

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, laserska moč: 4.000 W, SHORT-TERM AVAILABILITY: TRUMPF Trumatic L 3030 – 4 kW – Year 2006 TECHNICAL DATA: Manufacturer: TRUMPF Model: L 3030 – 4 kW Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness, mild steel: 20 mm Max. sheet thickness, stainless steel: 15 mm Hedpfx Agsuthz Toienk Max. sheet thickness, aluminium: 10 mm Operating hours: NC The machine has been regularly serviced by TRUMPF! Transmitting tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: CO2 laser TLF 2000, high-frequency excited, maintenance-free turbo radial blower, mirror telescope, chiller, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: maintenance-free three-phase servo motors - Quick-change cutting head system - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure regulation - APC capacitive height control and process regulation - Automatic focus position adjustment AutoLas Plus - Laser power control - Positioning laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - PMS plasma sensor technology - Automatic outer sheet edge detection - Programmable power cycles - Microweld - Automatic shut-off - Workspace lighting - Sinumerik 840D control: open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, fully enclosed and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, safety cabin - 3.5" floppy disk drive - TFT colour screen - Electrical equipment: voltage 400 V / 50 Hz - Paint finish: standard RAL 9002/5010 ADDITIONAL EQUIPMENT: - Laser TLF 4000, including lens monitoring sensor technology - PCS Process Control System

Stanje: novo, NEBES TM 275 Bandsaw – 400 V Three Phase, NEW “CE” - INDUCTION motor - Cast iron frame - Adjustable cutting angle from 0° to 60° - Entire structure made of cast iron - Electric pump for blade lubrication and cooling - Oil-bath blade tension gauge - Front controls and two cutting speeds - Coolant pump bypass switch - Blade guide with hard metal (H.M.) pads Hnjdpfsh Nm Ncex Agiek Cutting capacities: - Round at 0°: 220 mm - Square at 0°: 200 x 200 mm - Flat at 0°: 230 x 185 mm - Round at 45°: 150 mm - Square at 45°: 150 x 150 mm - Flat at 45°: 150 x 200 mm - Round at 60°: 90 mm - Square at 60°: 90 x 90 mm - Flat at 60°: 90 x 120 mm - Power: 1.3 HP - Voltage: 400 V - Blade size: 2450 x 27 x 0.90 mm - Weight: 265 kg

Stanje: novo, Leto izdelave: 2025, - Horizontal capacity: 500 kg - Vertical capacity: 250 kg - Table size: 560 mm - Left door: 170 mm Hnodpfx Agjgg Rb Toisk - Electrically tiltable - Foot pedal - Documentation - 230V

Leto izdelave: 1978, stanje: rabljeno, Pressure 100 t Outreach 380 mm Stroke 400 mm Drive power 22 kW Installation height 600 mm Ram surface 600x500 mm Table surface 720x600 mm Hjdolp U Dpjpfx Agisnk Machine weight approx. 9 t Two-hand operation, Stroke and pressure shut-off, Pressing time

Stanje: novo, Fastech 3-Roller Plate Bending Machine FRM 1250 x 90 Technical Specifications: Special equipment included in the price: - Hardened rollers - Motorized rear roller adjustment - Digital display Sheet width: 1250 mm Sheet thickness max.: 3.0 mm Hnsdpfx Ajhzq Dqogisk Sheet pre-bending thickness: 2.5 mm Roll length: 1250 mm Roller diameter: 90 mm Smallest bending diameter: 130 mm Weight: 500 kg Dimensions (LxWxH): 1950 x 900 x 1130 mm Motor: 1.1 kW Features: - Electrically driven upper and lower rollers - Swiveling upper roller - Conical bending device - Asymmetric roller arrangement - Self-braking main motor - Separate control and operating panel - Safety rope All values based on St-37 / 240 N/mm² CE-marked

Stanje: novo, Table length: 1300 mm Table width: 800 mm Lifting height: 1010 mm Hodpfxsfrztxj Agienk Load capacity: 1000 kg Minimum lifting height: 190 mm Connection voltage: 380 V Total power requirement: 0.75 kW Machine weight: approx. 0.22 t Space requirement: approx. 1.3 x 0.8 x 0.2 m The hydraulic lift tables are electrically driven and operated. They are equipped with a contact strip for safe lowering operations. Widely applicable for workshops, assembly departments, loading bays, etc.