Novatech Gooseneck 36T nakup rabljenega (377)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Hodpfx Aeyz Af Eslfofg Your service team, Mertens & Frowein GmbH

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2006, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 3.110 mm, skupna dolžina: 14.200 mm, skupna širina: 2.580 mm, skupna višina: 4.100 mm, vzmetenje: zrak, velikost pnevmatike: 305/65R17,5, barva: drugo, Leto izdelave: 2006, Oprema: ABS, dvižna zadnja plošča, = Additional Options and Equipment = - EBS - Lifting roof - Tail lift = Remarks = Number of axles: 4, Unladen weight: 11,480 kg, Gross weight: 48,600 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Year of body construction: 2006, Lifting roof, Sliding roof, Low-loader type: Semi low-loader, Load bed length: 995 cm, Gooseneck length: 365 cm, Axle platform length: 315 cm, Axle type: BPW, Tail lift, Tail lift type: Rear flap, Tail lift material: Steel, Battery for drive-on ramp, SEMI WITH CURTAINS / BIG HYDRAULIC RAMP / LAST TWO AXLES STEERED = More Information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual Hfjdpfx Aley Hqktjfog Axle configuration Tyre size: 305/65R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Lift axle; Tyre tread left inside: 10 mm; Tyre tread left outside: 9 mm; Tyre tread right inside: 9 mm; Tyre tread right outside: 9 mm Axle 2: Twin tyres; Tyre tread left inside: 6 mm; Tyre tread left outside: 9 mm; Tyre tread right inside: 11 mm; Tyre tread right outside: 11 mm Axle 3: Twin tyres; Steered; Tyre tread left inside: 10 mm; Tyre tread left outside: 9 mm; Tyre tread right inside: 8 mm; Tyre tread right outside: 9 mm Axle 4: Twin tyres; Steered; Tyre tread left inside: 6 mm; Tyre tread left outside: 7 mm; Tyre tread right inside: 7 mm; Tyre tread right outside: 8 mm Weights Kerb weight: 11,480 kg Payload: 37,120 kg GVW: 48,600 kg Functional Tail lift: Rear flap Sliding roof: Yes Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, trailers. Our offering includes all European brands, years of construction, and price categories. Why buy from Kleyn Trucks? Easy! • Large, fast-changing selection • Recognisable quality • Good prices • Proper business practice • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registrations arranged quickly • Professional technical services • The security of 'recognisable quality' • And more... Please visit our website for special offers and our complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.

Stanje: novo, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 45 kg, dovoljena osna obremenitev (os 2): 45 kg, dovoljena osna obremenitev (os 3): 45 kg, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 1.170 mm, skupna širina: 3.000 mm, skupna višina: 1.170 mm, vzmetenje: hidravlika, velikost pnevmatike: 215/75R17.5, medosna razdalja: 1.500 mm, barva: rdeča, Leto izdelave: 2026, Hauptmerkmale Baujahr: Neu Universal-Sattelhals SH 35/2 Ladeplattform: 3.700 mm x 2.440 mm 3,5-Zoll-Königszapfen Hydraulische Hub- und Senkvorrichtung Hydraulische Stützzylinder Kupplungshöhe: 1.450 mm Integrierte Zurrkupplung Zurrösen Reserverad + Reserveradhalter Hydraulischer Verriegelungsbolzen Automatische Gooseneck-Schmierung mit Pumpe, Beka-MAX Hatz Diesel PPU Hatz 1-Zylinder-Dieselmotor (Silent Pack) mit 9,6 kW 240-Liter-Hydrauliköltank, pulverbeschichtet Leistung: 35 l/min, maximaler Arbeitsdruck: 250 bar 3x verschiedene Schnellkupplungsgrößen für Druckanschluss 3x verschiedene Schnellkupplungsgrößen für Tankanschluss Elektronische Drehzahlregelung THP SL 3 Maximale Achslast: 45.000 kg pro Achse Gesamte Achslast: 3 x 45.000 kg = 135.000 kg ZG-Gesamtgewicht: 135.000 kg Leergewicht: 10.650 kg Nutzlast: 124.350 kg Gesamtlänge: 4.500 mm Ladeflächenbreite: 3.000 mm Höhe: 1.175 mm (+/- 300) THP SL 4 Maximale Achslast: 45.000 kg pro Achse Gesamte Achslast: 4 x 45.000 kg = 180.000 kg ZG-Gesamtgewicht: 180.000 kg Leergewicht: 13.850 kg Nutzlast: 166.150 kg Gesamtlänge: 6.000 mm Ladeflächenbreite: 3.000 mm Höhe: 1.175 mm (+/- 300) THP SL 5 Maximale Achslast: 45.000 kg pro Achse Gesamte Achslast: 5 x 45.000 kg = 225.000 kg ZG-Gesamtgewicht: 225.000 kg Leergewicht: 17.250 kg Nutzlast: 207.750 kg Gesamtlänge: 7.500 mm Ladeflächenbreite: 3.000 mm Höhe: 1.175 mm (+/- 300) THP SL 6 Maximale Achslast: 45.000 kg pro Achse Gesamte Achslast: 6 x 45.000 kg = 270.000 kg ZG-Gesamtgewicht: 270.000 kg Leergewicht: 19.800 kg Nutzlast: 250.200 kg Gesamtlänge: 9.000 mm Ladeflächenbreite: 3.000 mm Höhe: 1.175 mm (+/- 300) Tiefbett FB 300 - 10.000 mm, ohne mechanische Kupplung, nicht befahrbar - Nutzlastklassifizierung in Kombination (6+6): 300 t - Höhe 300 mm, Länge 10.000 mm, Breite 2.990 mm - Kupplungsköpfe vorne und hinten für modulare Verbindung - Fahrwerke für modulares Fahrwerk - Eigengewicht ca. 21.300 kg - Inkl. hydraulischem Verriegelungsbolzen zur längsseitigen Verbindung modularer Fahrwerke 1 x Tiefbett FB 250 - 8.000 mm, mit mechanischer Kupplung, nicht befahrbar - Nutzlastklassifizierung in Kombination (6+6): 170.000 kg - Höhe 250 mm, Länge 8.000 mm, Breite 2.990 mm - Kupplungsköpfe vorne und hinten für modulare Verbindung - 1x Verlängerung für Tiefbett, 4.000 mm - 1x Verlängerung für Tiefbett, 5.000 mm Hsdpfx Alex S Evbjfsfg Allgemeine Informationen Baujahr: 2026 Achskonfiguration Reifengröße: 215/75R17.5 Achshersteller: BPW Eco Plus Federung: hydraulische Federung Mittelachse 1: Doppelbereifung; Liftachse; max. Achslast: 45 t; gelenkt Mittelachse 2: Doppelbereifung; Liftachse; max. Achslast: 45 t; gelenkt Mittelachse 3: Doppelbereifung; Liftachse; max. Achslast: 45 t; gelenkt Mittelachse 4: Doppelbereifung; Liftachse; max. Achslast: 45 t; gelenkt Mittelachse 5: Doppelbereifung; Liftachse; max. Achslast: 45 t; gelenkt Mittelachse 6: Doppelbereifung; Liftachse; max. Achslast: 45 t; gelenkt Funktionalität Ladeflächenhöhe: 117 cm Ausziehbarer Aufbau: Ja Zustand Allgemeiner Zustand: sehr gut Technischer Zustand: sehr gut Optischer Zustand: sehr gut Schäden: keine Finanzielle Informationen...

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 170 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.800 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, skupna masa: 40.000 kg, kapaciteta rezervoarja za olje: 3.000 l, leto zadnje generalne obnove: 2024, For sale is a used baling press system consisting of a chain belt conveyor for under-floor operation, complete with a feed hopper, a hydraulic pre-compactor with agitator, a MACPRESSE 111A baling press, two complete wire tying racks each with 5 wire spool holders (wire not included). Technical data - Press: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific press force: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Filling volume: 2.5 m³ Hedpfx Aeu Th D Rslfefg Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Tying: 5-fold horizontal, fully automatic Throughput rates: approx. 30 to 35 t/hour, depending on material Hydraulic tank volume: 3,000 l Transport dimensions (press with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight (press): approx. 40 t Remarks: The baling press was partially overhauled in our workshop and fully tested after completion—see our function video for reference. Previously, paper and cardboard from municipal collection were pressed with the system. The operation was reassigned after the contract period ended, so the entire plant is for sale. Details of the overhaul and replaced spare parts can be found in the detailed photo documentation and our offer. The full documentation (manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection by appointment. No liability assumed for technical data or possible errors. Technical data - Conveyor belt: Manufacturer: Wagensfeld B.V. Model: Chain belt conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/minute Feed belt length: 6,900 mm Inclined belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Drive axle height above ground: 5,777 mm Feed belt wall height: 500 mm Inclined belt wall height: 880 mm Steel cleat height: 40 mm Cleat spacing: 1,200 mm Transport dimensions (disassembled): 15,005 x 2,503 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Remarks: The chain belt conveyor, built in 2017, was custom-built and installed to fit the press at its last installation in the Netherlands. The conveyor is in good, ready-to-use condition and has therefore not been overhauled. A layout drawing with pit dimensions is available. Scope of delivery: 1 x Chain belt conveyor, Wagensveld B.V. 1 x Feed hopper with pre-compactor flaps 1 x Agitator 1 x MACPRESSE baling press, type 111A 2 x Wire tying racks with wire spool holders, without wire 1 x Operating manual with CE declaration, electrical and hydraulic wiring diagrams

Stanje: novo, prevoženi kilometri: 1.200 km, moč: 140 kW (190,35 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 4x2, medosna razdalja: 4.325 mm, skupna masa: 5.500 kg, prva registracija: 01/2026, emisijski razred: Euro 6, barva: črn, vzmetenje: jeklo-zrak, velikost pnevmatike: 205/75r16c, število sedežev: 21, Leto izdelave: 2025, Oprema: ABS, airbag, centralno zaklepanje, dodatne luči, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, letne pnevmatike, meglenke, nadzor oprijema, parkirni grelec, servovolan, sistem za imobilizacijo, tempomat, Minibus Mercedes-Benz Sprinter 519 CDI HD Tourism - Euro 6 - 19+1+1 VIP seats Engine power: 190 HP, Euro VI 9G-TRONIC automatic transmission Metallic paint MB 9197 Obsidian Black Dimensions: 200 x 320 x 770 cm ABS, ESP, ASR, EBD Original MB 3rd brake light Light sensor & Crosswind Assist Digital tachograph EC - VDO original MB Speed limiter 100 km/h original MB Rain sensor Pre-installation for retarder Cruise control Alternator 14 V / 250 A - original MB Multifunction steering wheel adjustable for height and tilt Pedestals under the seats and raised last row Rear air suspension Anti-corrosion underbody protection Doors and Windows: Electric glass door with lowered entry step Luggage compartment hatch Large panoramic windscreen with electric sun blind Tinted double-glazed high panorama windows Upper rear window Electric window lifters Electrically adjustable and heated exterior mirrors Luggage compartments and extensions: Lowered luggage compartment with hatch & side luggage compartments left and right Luggage compartment capacity 4.1 m³ Luggage compartment lighting Seats and Interior Equipment: 19 Bus Comfort 4020 VIP seats, adjustable (backrest + side), with premium flair on seat and backrest, and with adjustable and foldable comfort headrest 2 and 3-point seat belts Seat nets Tables with cup holders Footrests 5 double seats on the left side 5 single seats on the right side 4 seats in the last row Comfort suspension driver’s seat, original MB Tour guide seat Original MB armrest for driver’s seat Original MB seat heating for driver’s seat Original MB comfort headrest for driver’s seat Air Conditioning, Heating & Lighting: Original MB auxiliary heater 5 kW 2 convectors with acceleration pump & fans Original MB driver’s air conditioning 7 kW VIP service sets with reading lamp and air nozzles Hfjdpfsy D Sf Tjx Alfog Overhead luggage racks with air ducts and lighting (2 colors) Passenger compartment air conditioning SPHEROS VALEO 13 kW LED on ceiling LED at entrance step LED on pedestals LED lighting between windows LED lighting below windows Interior fittings: Interior cladding + thermal and sound insulation in passenger compartment Window surrounds Thermal and sound insulation Alcantara ceiling cladding Anti-slip PVC flooring in wood or marble look Grab rail behind driver Curtains Dashboard with graphics Armrest refinement in graphic design Accessories and interior fittings: Radio CD, MP3, DVD player with microphone and amplifier MBUX multimedia system with 7-inch touchscreen Dynamic gooseneck microphone LCD screen 19'' Rear view camera 12 USB double sockets USB double socket for driver Refrigerator under dashboard Digital clock and thermometer Main switch for additional installations Accessories and exterior fittings: LED headlights Fog lights with cornering light Reverse warning system Chrome wheel covers Other: COC (Certificate of Conformity) Fire extinguisher Inscriptions, stickers, and labeling MB service book Emergency exits / roof hatch as emergency exit Emergency hammers Immediately available

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, skupna dolžina: 16.470 mm, skupna širina: 2.750 mm, skupna višina: 1.250 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Leto izdelave: 2003, Farbe: Grau Nutzlast: 32.540 kg Details: Hersteller: Goldhofer Typ: STZ-L4-33/80 Fahrgestellnummer: WG0STZL4530027413 Baujahr: 2003 Gewichte: Sattellast: 17.500 kg Achslast: 10.000 kg je Achse Gesamte Achslast: 40.000 kg Zulässiges Gesamtgewicht: 57.500 kg Leergewicht: 24.960 kg Zuladung: 32.540 kg Achsen: Achsenmarke: Gigant Luftfederung Alle Achsen hydraulisch gelenkt High-Low-Ventil ABS Bereifung: 235/75 R17.5, Doppelbereifung Tragfähigkeitsindex: 143/141J Abmessungen: Länge: 16.470 mm Ausschübe: 8.740 mm + 8.635 mm + 8.535 mm Maximal verlängerte Länge: 42.380 mm Ladeflächenbreite: 2.750 mm Ladeflächenhöhe: 1.025 mm (+100/–165 mm) Sattelhöhe: +/- 1.250 mm Zusätzliche Ausstattung: NATO-Stecker Zurrösen Rungenaufnahmen Hydraulisch betätigter Schwanenhals Holzboden auf der Ladefläche Hedpfx Aeyrzbljlfsfg Mechanisches Stützfußsystem Werkzeugkasten Elektrohydraulische Pumpe zur Bedienung der Aufliegerfunktionen Reserveradhalter Königszapfen 3,5” Zentrale Schmieranlage mit 2 Pumpen Funk-Fernbedienung = Weitere Informationen = Allgemeine Informationen: Baujahr: 2003 Achskonfiguration: Reifen: 235/75 R17.5 Achsenmarke: Gigant Federung: Luftfederung Achse 1 (hinten): Doppelbereifung, Liftachse, max. Achslast: 10.000 kg, gelenkt Achse 2 (hinten): Doppelbereifung, max. Achslast: 10.000 kg, gelenkt Achse 3 (hinten): Doppelbereifung, max. Achslast: 10.000 kg, gelenkt Achse 4 (hinten): Doppelbereifung, max. Achslast: 10.000 kg, gelenkt Gewichte: Leergewicht: 24.960 kg Zuladung: 32.540 kg zul. Gesamtgewicht: 57.500 kg Funktionell: Ladeflächenhöhe: 102 cm Ausziehbarer Aufbau: Ja Zustand: Technischer Zustand: sehr gut Optischer Zustand: sehr gut Finanzielle Informationen: Preis: auf Anfrage Weitere Informationen: Bitte kontaktieren Sie Stefan Schaapveld für weitere Auskünfte.

Stanje: rabljeno, lastna masa: 22.900 kg, največja dovoljena obremenitev: 41.100 kg, skupna masa: 64.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2009, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 70 odstotek, barva: zelen, Leto izdelave: 2009, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 40194 Goldhofer, STZ-VL4-42/80A * Year of manufacture: 2009 * ABS, Anti-lock Braking System * Air suspension * Steering axle * Air connection coupling head (red + yellow) * Spare wheel holder with spare tire * Connection plug 2x7 pin * Lifting and lowering device * Extendable * Telescopic – telescopic low-bed trailer * Heavy-duty lashing eyes * Suspension: Air * Gross vehicle weight: 64,000 kg * Unladen weight: 22,900 kg * Payload: 41,100 kg * Permissible total weight: 64,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 70% – 70% – tire size: 235/75 R17.5 * Tire condition 2nd axle: 70% – 70% – tire size: 235/75 R17.5 * Tire condition 3rd axle: 70% – 70% – tire size: 235/75 R17.5 * Tire condition 4th axle: 70% – 70% – tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Telescopically extendable approx. 4,000 mm * Deck height above axles: approx. 1,000 mm * Deck height above ground: approx. 360 mm * Extendable to 3,200 mm * Removable gooseneck Disclaimer: Hfjdpfoyict Uex Alfog Subject to change, prior sale and errors excepted. More photos and videos available on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and simple financing * Application for all (export) documents * Ordering of export license plates / customs plates * Vehicle conditioning: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * Technical inspections, registration services * Transportation of commercial vehicles Please contact our trained staff. We are happy to advise you.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, hod: 315 mm, skupna masa: 8.000 kg, Hidravlična upogibna stiskalnica Proizvajalec: BYSTRONIC Tip: Xpert 100/2050 Leto izdelave: 2011 Tehnični podatki Proizvajalec: BYSTRONIC Tip: Xpert 100/2050 Leto izdelave: 2011 Moč: 100 t Dolžina upogiba: 2000 mm Hod: maks. 315 mm Moč motorja: 7,5 kW Dimenzije: pribl. d 3,10 x š 1,90 (brez podložnih rok) x v 2,85 m Teža: pribl. 8 t Oprema: • Krmiljene osi: Y1, Y2, X, R, Z1, Z2 • Svetlobna pregrada PILZ Fast bend Hfjdjy Ef Rxspfx Alfeg • Krmiljenje: MMC BYBEND • Hidravlično vpenjanje orodja zgoraj in spodaj • Hidravlična stiskalna miza !!! • Pomikljive nosilne roke • CNC krmiljena bombiranje • 1 zgornje orodje, zamaknjeno, višina 150 mm, 80°, segmentirano • 1 spodnje orodje V12 Vse informacije brez garancije. Ogled je možen kadarkoli v naši razstavni dvorani.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, dolžina tovornega prostora: 17.840 mm, širina tovornega prostora: 1.750 mm, velikost pnevmatike: 9.50R17,5, medosna razdalja: 1.350 mm, barva: modra, Leto izdelave: 1992, Color: Blue Payload capacity: 43,600 kg Extendable Manufacturer: Goldhofer Model: STZ-VL4-44-80 Extendable Low Loader Chassis number: WG0STZV47N0020238 Year of manufacture: 1992 Weights: Kingpin load: 24,000 kg Axle load: 10,000 kg Total axle load: 40,000 kg Hsdpfx Alouu Hbhofofg Gross vehicle weight (GVW): 64,000 kg Unladen weight: 20,400 kg Payload: 43,600 kg Axles: Axle brand: BPW Air suspension All axles hydraulic steering High/low valve ABS braking system Tyres: 9.50R17.5 Dual mounted Load index 143/141 J Dimensions: Length: 17,840 mm Extensions: 4,000 mm Max. extended length: 21,840 mm Loading platform: 8,000 mm - 12,000 mm Loading platform width: 2,750 mm Height: 600 (+/-100) mm Kingpin height: 1,300 mm Additional information: Truck hydraulic connection for hydraulic functions Lashing rings 2x spare wheel Detachable gooseneck Hydraulically operated gooseneck Working lights Rear underrun protection with lights Kingpin 3.5” Schübler lubrication system Outriggers for platform widening Fixed ramps on loading platform High/low valve = Further Information = General information Year of manufacture: 1992 Axle configuration Tyre size: 9.50R17.5 Axle brand: BPW Rear axle 1: Dual tyres; Max. axle load: 10,000 kg; Steering Rear axle 2: Dual tyres; Max. axle load: 10,000 kg; Steering Rear axle 3: Dual tyres; Max. axle load: 10,000 kg; Steering Rear axle 4: Dual tyres; Max. axle load: 10,000 kg; Steering Weights Unladen weight: 20,400 kg Payload: 43,600 kg GVW: 64,000 kg Functional Extendable structure: Yes Condition Technical condition: Very good Visual condition: Very good Damage: None Financial information Price: On request Further information Please contact Stefan Schaapveld for more information.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 11.200 kg, dovoljena osna obremenitev (os 2): 11.200 kg, dovoljena osna obremenitev (os 3): 11.200 kg, dolžina tovornega prostora: 14.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 880 mm, skupna dolžina: 14.600 mm, skupna širina: 2.550 mm, skupna višina: 880 mm, vzmetenje: zrak, velikost pnevmatike: 245 / 70 R17.5, barva: modra, Leto izdelave: 2008, Oprema: dvižna zadnja plošča, Color: Blue Loading capacity: 72,600 kg Deck height: 885 mm Extendable Braked Main Features Manufacturer: Goldhofer Type: STZ L6 65/80A Semi Low Loader with ramps Chassis Number: WG0STZL6A80030419 Year of manufacture: 2008 Weights/Loading Capacity Hfsdpfx Aex R Undolfjg King-pin load: 26,000 kg Axle load per axle: 11,200 kg Total axle load: 6 x 11,200 kg = 67,200 kg Gross Vehicle Weight (GVW): 93,200 kg Unladen weight: 20,600 kg Payload: 72,600 kg Axles Axle brand: BPW Air suspension 1st axle fixed Axles 2–6 hydraulically steered Axles 1 & 2 liftable High/low valve WABCO braking system Tyres: 245 / 70 R17.5 Dimensions Length: 14,600 mm Extensible by: +7,200 mm Max extended length: 21,800 mm Load floor width: 2,550 mm Platform height: approx. 885–925 mm King-pin height: +/- 1,350 mm Additional Information • PTO-operated (Truck) • Lashing rings • Stake pockets • Partially wooden floor • Mechanical landing gear • Hydraulic ramps • Extendable loading platform • Rear bumper with lights • 3.5" king-pin • Central lubrication system • Oversize load marker boards • Radio remote control • Outriggers • Toolbox on gooseneck = More Information = General Information Year of manufacture: 2008 Axle configuration Tyre size: 245 / 70 R17.5 Axle brand: BPW Eco Suspension: Air suspension Rear axle 1: Twin tires; lift axle; max. axle load: 11,200 kg Rear axle 2: Twin tires; lift axle; max. axle load: 11,200 kg; steered Rear axle 3: Twin tires; max. axle load: 11,200 kg; steered Rear axle 4: Twin tires; max. axle load: 11,200 kg; steered Rear axle 5: Twin tires; max. axle load: 11,200 kg; steered Rear axle 6: Twin tires; max. axle load: 11,200 kg; steered Weights Unladen weight: 20,600 kg Payload: 72,600 kg GVW: 93,200 kg Functional Superstructure brand: WABCO Deck height: 88 cm Extendable superstructure: Yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request Further information For more information, please contact Stefan Schaapveld.

Stanje: rabljeno, največja dovoljena obremenitev: 24.855 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2025, skupna širina: 2.550 mm, skupna višina: 1.260 mm, Oprema: ABS, Kässbohrer K.SOK Extendable Truck/Car Transporter TECHNICAL DATA: * Overall length: 13,200 mm * Wheelbase: 8,350 mm * Overall width: 2,550 mm * Fifth-wheel height: 1,000 mm * Axle load: 24,000 kg * King pin load capacity: 12,000 kg * Unladen weight ±3%: 11,145 kg * Gross vehicle weight: 36,000 kg * Vehicle extension: 1,800 mm Hfedpew Dw Adofx Alfog * Bumper extension: 1,200 mm CHASSIS/SUSPENSION: * BPW brand axles, 9,000 kg technical capacity with air suspension and drum brakes * Rear axle self-steering * Front axle liftable * Wabco brake system * 12 x 205/65 R17.5 tyres FRAME: * Made of high-strength steel * Front ramps: 2 hydraulic foldable and hydraulically adjustable galvanized ramps, 3,800 mm long each (max. extension angle between 2° and 15°), load capacity 7 t * Middle ramps: 2 hydraulic foldable, galvanized ramps, 1,200 mm long each (angle between 0° and 44°), load capacity 7 t * Front axle ramp: 1 hydraulic foldable, galvanized ramp, 4,000 mm long (angle between 0° and 29°), load capacity 7 t * Loading ramps: For loading vehicles onto the truck transporter, 2 aluminium loading ramps measuring 2,000 x 400 x 75 mm (L x W x H), capacity 3.5 tonnes each. Ramp angle is 10° with rear bumper closed and 8° with bumper extended * Wheel recess size: 800 x 460 x 70 mm * Vehicle extension in 1,800 mm type, every 300 mm LOAD SECURING: * Lashing rings: 1 pair with 8-ton load capacity on the gooseneck, 2 pairs with 8-ton load capacity on the front ramps, and 2 pairs with 8-ton load capacity at the rear section OTHER: Chassis color: Novagrau, galvanized For further information, please feel free to contact us.

Stanje: rabljeno, največja dovoljena obremenitev: 24.855 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2025, skupna širina: 2.550 mm, skupna višina: 1.260 mm, Oprema: ABS, Kässbohrer K.SOK Extendable Truck/Car Transporter TECHNICAL DATA: * External length: 13,200 mm * Wheelbase: 8,350 mm * Total width: 2,550 mm * Fifth wheel height: 1,000 mm * Axle load: 24,000 kg * King pin capacity: 12,000 kg * Unladen weight (±3%): 11,145 kg * Gross vehicle weight: 36,000 kg * Vehicle extension: 1,800 mm * Bumper extension: 1,200 mm CHASSIS: * BPW branded axles, 9,000 kg technical capacity, with air suspension and drum brakes * Last axle self-steering * First axle liftable * Wabco brake system * 12x 205/65 R17.5 tyres FRAME: * Made of high-strength steel * Front ramp: two galvanised hydraulic folding and sliding ramps, each 3,800 mm long (max. 1,000 mm extension angle adjustable from 2° to 15°), load capacity 7 t * Centre ramp: two galvanised hydraulic folding ramps, each 1,200 mm long (angle adjustable from 0° to 44°), load capacity 7 t * Front axle ramp: one galvanised hydraulic folding ramp, 4,000 mm long (angle adjustable from 0° to 29°), load capacity 7 t * Loading ramps: two aluminium loading ramps for loading vehicles onto the truck transporter, dimensions 2,000 x 400 x 75 mm (L x W x H), capacity 3.5 tonnes. Ramp angle is 10° with the rear bumper closed and 8° with bumper extended * Wheel recess dimensions: 800 x 460 x 70 * Vehicle extension type: 1,800 mm, every 300 mm Hodsw Nly Tepfx Alfefg LOAD SECURING: * Lashing eyes: 1 x 2 units with 8 ton capacity at the gooseneck, 2 x 2 units with 8 ton capacity at the front ramp, and 2 x 2 units with 8 ton capacity at the rear section OTHER: Chassis colour: red For further information, please feel free to contact us.

Stanje: rabljeno, vrsta goriva: dizel, Leto izdelave: 2021, obratovalne ure: 2.828 h, Oprema: klimatska naprava, AdBlue-sistem: Da Lastna teža: 15.600 kg Znamka motorja: Perkins Širina gosenic: 50 cm CE-označba: da Dolžina visokega žlica/ročice: 250 cm Hjdpfx Aoy Nhxtslfefg Za dodatne informacije se obrnite na Kristoff Van Havere. = Dodatne možnosti in oprema = - AdBlue - Dvigalo z varnostnim povratnim ventilom za lomljenje cevi – izredno varnostni ventil za iztegnjeno roko/vitl - Avtomatska/hidravlična hitra spojka - Avtomatski sistem mazanja - Hidravlika za brežine - Gumijaste gosenice - Hidravlika za kladivo/škarje - Visoka žlica z varnostnim povratnim ventilom za lomljenje cevi - Hidravlika za škarje - Zaščitno stikalo - Labodji vrat – iztegnjena dvigalka - Dodatna hidravlika

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €63,900 Hedpowirrqefx Alfefg Leasing rate: €1,207.71 Bending length: 4,200 mm Sheet thickness (420 N/mm²): 1.5 mm Max. sheet thickness – stainless steel: 1 mm Max. sheet thickness – aluminium: 2 mm Drive: Motorized Length: 5,450 mm Width: 2,200 mm Height: 1,900 mm Weight: 5,350 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING - 15.6" touchscreen on swivel arm - Tabular programming via input of the respective axis values - Open or closed hemming function - Multi-radius functions for folding or bending - Programming of material quality, sheet thickness, springback, bending corrections, and creation of a database for various material types, sheet thicknesses, and sheet lengths - Piece counter - Password authorization - 128GB HDD, providing virtually unlimited storage capacity - Remote maintenance via WLAN - Detailed alarm, tool, and parameter pages Motorized drive (servo motors) for upper beam and bending beam (Z and Y axis) Motorized backgauge (X axis) with servo motor, 1,000 mm, rectangular configuration, with ball rolls in the sheet metal trays Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Continuous upper tool rail 20° with R1 2 pcs. bending beam rails (7 or 10 mm, 15 or 25 mm) Front light curtain protection Three-way foot pedal OPTIONS: Segmented gooseneck rails Pneumatic tool clamping Segmented lower and bending tools Servo drive for the bending beam Manual crowning system Second foot pedal Side gauge Rear light curtain protection 2D or 3D graphic control PC software Special omega geometry for lower and bending tools Tapered backgauge Backgauge extension Vacuum holder

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,600 Leasing rate: €1,013.04 Bending length: 2,050 mm Sheet thickness (420 N/mm²): 3 mm Max. sheet thickness - stainless steel: 2 mm Max. sheet thickness - aluminium: 4 mm Drive: Motorized Length: 3,350 mm Width: 2,200 mm Height: 1,900 mm Weight: 3,800 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING - 15.6" touchscreen on swivel arm - Tabular programming by input of respective axis values - Open or closed hemming function - Multi-radius functions for hemming or bending - Programming of material type, sheet thickness, springback, bending corrections, and creation of a database for different material types, sheet thicknesses, and sheet lengths - Piece counter - Authorization via password - 128GB HDD, virtually unlimited storage capacity - Remote maintenance via WiFi - Detailed alarm, tool, and parameter pages Motorized drive (servo motors) for the upper beam and bending beam (Z and Y axis) Motorized backgauge (X axis) with servo drive, 1,000 mm, rectangular configuration, with ball rollers in sheet platforms Upper beam opening: 220 mm (without tools) Manual adjustment of bending beam: 35 mm Upper beam with 45° geometry Continuous upper tool rail, 20° with R1 2 pcs. bending beam rails (7 or 10 mm, 15 or 25 mm) Front light curtain protection 3-position foot pedal OPTIONS: Segmented gooseneck rails Pneumatic tool clamping Segmented lower and bending tools Servo drive for bending beam Manual crowning system Second foot pedal Side stop Rear light curtain protection 2D or 3D graphical control PC software Special Omega geometry for lower and bending tools Hjdpfxowiq E Ne Alfefg Tapered backgauge Backgauge extension Vacuum holder

Stanje: rabljeno, največja dovoljena obremenitev: 120.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/1993, Leto izdelave: 1993, Oprema: ABS, Manufacturer: GOLDHOFER Model: THP-SL Year of manufacture: 1993 / 2010 Hfedewlip Eopfx Alfog Comprising: - Gooseneck with hydraulic power unit (Year: 1993 – Hydraulic system: 2003) - 2-axle bogie module (Year: 2010) - 3-axle bogie module (Year: 1993) - 4-axle bogie module (Year: 1993) - Fixed excavator deck 5.8m (Year: 2010 – Payload: 100 t) - Extendable excavator deck 8m + 5m (Year: 1993 – Payload: 120 t) Available immediately. Subject to prior sale and errors.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 6.700 kg, dovoljena osna obremenitev (os 2): 6.700 kg, dovoljena osna obremenitev (os 3): 6.700 kg, prva registracija: 10/2008, skupna širina: 2.990 mm, barva: črn, Leto izdelave: 2008, Axle configuration Rear axle 1: Max. axle load: 6,700 kg Rear axle 2: Max. axle load: 6,700 kg Rear axle 3: Max. axle load: 6,700 kg Rear axle 4: Max. axle load: 6,700 kg Rear axle 5: Max. axle load: 6,700 kg Rear axle 6: Max. axle load: 6,700 kg Weights Unladen weight: 32,080 kg Payload: 67,919 kg Gross vehicle weight (GVW): 99,999 kg Hodpoyrnx Djfx Alfsfg Functional Extendable body: Yes Condition Technical condition: good Visual condition: good Identification Registration number: ZZ-83-87 NOOTEBOOM EURO 2+5 LOWBED TRAILER 2-AXLE DOLLY 5-AXLE LOWBED TRAILER HYDRAULIC PENDLE AXLES HYDRAULIC DETACHABLE GOOSENECK WITH CYLINDERS LOAD PLATFORM LENGTH 800 CM + 400 CM EXTENSION, TOTAL LOAD PLATFORM LENGTH 1,200 CM, WIDTH 300 CM + 2X 25 CM EXTENDABLE (TOTAL 350 CM) WIDTH OF THE SMALL BED 135 CM + LENGTH 825 CM; 2X SIDE EXTENSIONS, TOTAL LOAD PLATFORM WIDTH 345 CM LOAD PLATFORM HEIGHT 65 CM EXCAVATOR WELL 680 CM X 95 CM X 55 CM HOOK EYES CENTRAL LUBRICATION SYSTEM REMOTE CONTROL TYRE SIZE 285/70/R19.5 TECHNICAL GROSS WEIGHT 99,999 KG FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 11.000 kg, dovoljena osna obremenitev (os 2): 11.000 kg, dovoljena osna obremenitev (os 3): 11.000 kg, dolžina tovornega prostora: 15.500 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 1.050 mm, skupna dolžina: 15.500 mm, skupna širina: 2.740 mm, vzmetenje: hidravlika, velikost pnevmatike: 245/ 70R17.5 | load index 146/146F, barva: modra, Leto izdelave: 2003, Colour: Blue Payload: 73,500 kg Extendable Main Features Manufacturer: Nooteboom Type: MCO-85-06 V/Z – Double Extendable Chassis number: XMRMC000030000456 Year of manufacture: 2003 Weights / Loading Capacity Kingpin load: 27,500 kg Axle load: 11,000 kg Total axle load: 66,000 kg Gross Vehicle Weight (GVW): 93,500 kg Unladen weight: 20,200 kg Payload: 73,500 kg Axles Axle manufacturer: SAF Hydraulic suspension First axle rigid Axles 2 to 6 with hydraulic steering High-low valve WABCO braking system with EBS Tyres: 245 / 70 R17.5 | Load index 146/146F Dimensions Length: 15,505 mm Extensions: +8,800 mm +8,800 mm Max. extended length: 31,105 mm Loading floor length: 11,520 mm Max. loading floor length: 29,120 mm Loading floor width: 2,740 mm Height: 1,050 mm Additional Equipment NATO plug Hydraulically operated gooseneck Outriggers Double extendable Lashing rings Manual landing gear Electrohydraulic pump for trailer functions Rear underrun protection with lights Kingpin 3.5” Central lubrication system with 2 pumps = Further information = General Information Year of manufacture: 2003 Axle Configuration Tyre size: 245/70 R17.5 | Load index 146/146F Axle brand: SAF Suspension: Hydraulic suspension Rear axle 1: Twin tyres, Max. axle load: 11,000 kg Rear axle 2: Twin tyres, Max. axle load: 11,000 kg, Steering axle Rear axle 3: Twin tyres, Max. axle load: 11,000 kg, Steering axle Rear axle 4: Twin tyres, Max. axle load: 11,000 kg, Steering axle Rear axle 5: Twin tyres, Max. axle load: 11,000 kg, Steering axle Rear axle 6: Twin tyres, Max. axle load: 11,000 kg, Steering axle Weights Unladen weight: 20,200 kg Payload: 73,299 kg Hedpfx Aev E Rchslfsfg Gross vehicle weight: 93,500 kg Functional Floor height: 105 cm Extendable chassis: Yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request Further information Please contact Stefan Schaapveld for more details.

Stanje: rabljeno, Leto izdelave: 1998, Beutler P96-C630 - Ekscentrična stiskalnica - mobilna nadzorna plošča - brezstopenjsko nastavljiv pogon - kombinacija sklopke in zavore - zaščita proti preobremenitvi v batnici - svetlobna pregrada - labodja vratna svetilka - leto izdelave: 1998 Tehnični podatki - Tlak: 630 kN - Hod: 12 - 120 mm - Število hodov: 30 - 130 /min Hjdpeyna N Tofx Alfofg - Najv. zaustavitveni čas: 96 ms - Izpad: 300 mm - Razdalja miza/batnica: 495 mm - Prehod med stenama ohišja: 270 mm - Površina batnice: 450 x 360 mm - Nastavitev batnice: 120 mm - Površina mize: 800 x 560 mm - Odprtina v mizi: Ø 100 mm - Delovna višina: 880 mm - Min. varnostna razdalja: 192 mm - Pogonska moč: 5,5 kW - Obratovalna napetost: 3x 400 V / 50 Hz - Dimenzije stroja (ŠxVxG): 1800 x 2600 x 1600 mm - Dimenzije elektro omare (ŠxVxG): 800 x 1700 x 450 mm - Teža: pribl. 5500 kg

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €74,800 Lease payment: €1,413.72/month Pressing force: 40 tons Bending length: 2,050 mm Axes: Y1 / Y2 / X and R axes Stroke: 200 mm Distance between uprights: 1,700 mm Throat depth (side frame): 350 mm Installation height: 440 mm Drive system: servo motor-driven spindle Rapid traverse (Y axis): 180 mm/s Working speed (Y axis): 10 mm/s Return speed (Y axis): 115 mm/s Backgauge travel range (X axis): 650 mm Backgauge travel range (R axis): 250 mm Table height: 1,000 mm Motor power: 7.2 kW Length: 2,600 mm Width: 1,450 mm Height: 2,650 mm Weight: 4,400 kg STANDARD EQUIPMENT: - Servo-driven spindle drive - 4 axes (Y1, Y2, X, and R) - Color graphics controller DELEM DA-66S • 17" color touchscreen • 3D visualization in simulation and production • Suitable for full Windows applications • Compatible with Delem Modusys • USB and peripheral interface • User-specific application support • Sensor, bending, and correction interface - Servo-driven backgauge on linear guides and recirculating ball screws - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and gooseneck - 4-way die block 60x60 2009 (V=16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on upper beam - Sheet support arms on linear guides - Equipment according to CE regulations - Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Higher productivity than conventional hydraulic press brakes due to virtually delay-free response to foot pedal signal - Low energy consumption - Compact spindle drive unit with a low number of individual components - No hydraulic components Hfsdpfx Ajynm A Helfjg Options: - Z1/Z2 axes - CNC controller DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick clamping lever for upper tool

Stanje: novo, največja dovoljena obremenitev: 51.780 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our entire range of vehicles, including those available immediately or at short notice, can be found on our website. Excerpt from the specification. Full specification available on request. GOOSENECK: * Gooseneck in SNT design for optimization of loading platform length, approx. 3,700 mm long, rear with bevel approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front control panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * One mounting hole in the rear upper section of the gooseneck outer beams for a bolt-on lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck: plug-in aluminium tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on the gooseneck * 2-inch king pin * One crosswise stake pocket rail fitted in the deck of the gooseneck before the bevel, for plug-in stakes, approx. 100 x 50 mm LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in loading platform and bevel to accommodate excavator stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd and 4th axle steering * 3rd and 4th axles with electro-magnetic reversing lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing gear with 2-speed gearbox and crank * Continuous hardwood floor covering on loading platform and between axles (approx. 50 mm thick), increases friction coefficient * 1 intermediate table with a recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of recessed, fold-out lashing rings in the loading platform's outer frame (LC 10,000 daN) * Additionally, 1 pair of lashing rings on the outside of the front cross member, turned approx. 90° inward towards the loading area (LC 10,000 daN) * Extendable galvanized widenings, approx. 230 mm per side (without wooden planks) * 1 pair of fixed wheel recesses open to the extension, approx. 700 x 410 mm (W x D) in the loading platform in front of the 1st axle * Between 2nd and 3rd axle: 1 pair fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF twin tires – brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide * Hardwood flooring, hydraulically foldable ramp tips * Ramps hydraulically movable by approx. 235 mm outwards and approx. 215 mm inwards, individually Hfjdpfx Aljyhkrlofeg * Hardwood flooring on the loading platform’s bevel * Ramp with hardwood flooring BRAKING SYSTEM: * WABCO EBS-E braking system compliant with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% a

Stanje: dober (rabljeno), Koda: 0330 Znamka: FBR Model: L 85/1500 - CE standard Avtomatski tračni brusilni stroj z dvojnim labodjim vratom za obdelavo lesa, mizarskih izdelkov, pohištva, okenskih okvirjev, aluminija, kovin in različnih materialov - CE standard Tehnični podatki: Dimenzije delovne površine mm: 1450 x 700 Avtomatsko dviganje mize Vertikalni hod mm: 750 Hodpfxoyu Ttrs Alfjfg Moč motorja: 3 Hp trifazni Maks. dolžina traku mm: 4500 Širina traku mm: 120/150 Premer izsesovalnega priključka mm: 100 Skupne dimenzije mm: 2550 x 1250 x 1550 v Teža kg: 320

Stanje: novo, skupna masa: 43.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Oprema: ABS, GVN 4GVN O4 EXTRA-WIDE PLATFORM KOC LIFT HYDRAULIC RAMP ----VEHICLE HISTORY * NEW VEHICLE 09/2025 * VIDEO AVAILABLE UPON REQUEST VEHICLE FEATURES EQUIPMENT AND BODY * SPARE WHEEL * FRONT STORAGE COMPARTMENT * FRONT STORAGE COMPARTMENT BELOW GOOSENECK * STORAGE BOXES ON BOTH SIDES * FIRE EXTINGUISHER HOLDER * LOADING AREA ON GOOSENECK * EXTENDABLE PANEL FOR OVERSIZE LOADS * SIDE EXTENSIONS FOR OVERSIZE LOADS * WARNING SIGNS FOR OVERSIZE LOADS 4X * LASHING POINTS * ADDITIONAL SUPPORT LEGS * FIXED HYDRAULIC LOADING RAMPS * ELECTRICAL CONNECTION FOR RAMP HYDRAULICS * TRAILER LIGHT SYSTEMS * PRESSURE GAUGE ----CHASSIS AND AXLES * OSMAN KOC AXLES (IDENTICAL TO BPW AXLES) * 4 AXLES * 1 LIFT AXLE * LAST AXLE: LOCKABLE STEERING * FULL AIR SUSPENSION * DRUM BRAKES * WABCO BRAKE SYSTEM ----TYRES * ALL TYRES * 235/75 R17.5 ----DIMENSIONS * CARGO AREA DIMENSIONS * 9.55 M L x 2.55 M W / 3 M W IN OVERSIZE MODE * RAMP LENGTH * 3.23 M L x 0.75 M W * CARGO AREA ABOVE GOOSENECK * 1.8 M L x 2.4 M W * GOOSENECK HEIGHT FROM GROUND * 1.4 M H Hfodpexpzr Dsfx Alfeg * LOAD FLOOR HEIGHT FROM GROUND * 0.9 M H * OVERALL LENGTH WITHOUT RAMPS * 13.6 M L ---- IMMEDIATELY READY FOR USE ---- * EXPORT SALES ONLY WITH DEPOSIT (DEPOSIT) MIN. 500¤ - 2000¤ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ ----EXPORT/EXW CUSTOMS REGISTRATION IN 10 MIN. (AUTHORIZED EXPORTER) 5-DAY, 30-DAY LICENSE PLATE AND 17–21 DAY AUSTRIAN LICENSE PLATE EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least ¤ 500.00 / ¤ 1,000.00 is required. (For sales to the EU and third countries a deposit/guarantee of at least ¤ 500.00 / ¤ 1,000.00 will be levied) Subject to alterations, errors and prior sale! For more vehicles, please visit our website: Sale is exclusively based on our General Terms and Conditions – see our website Important note: Despite careful inspection of all details in our offer, errors may occur, in part due to transmission errors in the systems of various platform providers. Therefore, all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it serves as information for contract initiation. All information provided here is without guarantee and does not represent warranted characteristics.

Stanje: novo, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, OTHER GÜVEN LOW-LOADER? 4 AXLES? HYDRAULIC RAMPS? STEERING AXLE? WIDE-LOAD PREPARATION?----VEHICLE HISTORY OTHER GÜVEN TRAILER? STEERING AXLE? PENDLE AXLE? MOVABLE RAMPS? OVERWIDTH? NEW? LIFT AXLE? MANUFACTURER * GVN-TRAILER - OUR OWN PRODUCTION FROM TURKEY AXLES * 4 AXLES * AXLE CONFIGURATION * TRI-AXLE * THIRD AXLE WITH STEERING AXLE * LIFT AXLE * OSMAN KOÇ AXLES * DRUM BRAKES * AIR SUSPENSION BODY * WITH GOOSENECK * EXTENDABLE LOW-LOADER - 6 M EXTENSION * ADJUSTABLE FIFTH WHEEL PIN, UP TO 22 TONS Hfsdpfx Asymu Nxslfog DIMENSIONS * FROM RAMPS TO KING PIN (CLOSED): 9.40 M * FROM RAMPS TO KING PIN: 12.10 M * FULLY EXTENDED TOTAL LENGTH: 15.40 M * EXTENSION: 6.00 M RAMPS * HYDRAULIC RAMPS * SWIVELING * HYDRAULICALLY ADJUSTABLE (LEFT AND RIGHT) EQUIPMENT * AIR SUSPENSION * LOAD SECURING LASHING EYES * WIDE-LOAD PREPARATION * TOOLBOX TYRES * TYRE SIZE: 235/75 R17.5 * TWIN TYRES WEIGHTS * UNLADEN WEIGHT: 12,500 KG * GROSS VEHICLE WEIGHT (GVW): 68,000 KG * TECHNICAL PAYLOAD: 45,500 KG * TECHNICAL GVW: 58,000 KG * AXLE LOADS: 12,000 KG PER AXLE CONDITION * NEWLY MANUFACTURED DESCRIPTION GVN TRI-AXLE LOW-LOADER WITH LIFT AXLE AND STEERING AXLE (3RD AXLE), AIR SUSPENSION AND OSMAN KOÇ AXLES WITH DRUM BRAKES. EXTENDABLE SEMI-TRAILER WITH 6 M EXTENSION AND ADJUSTABLE KING PIN. HYDRAULIC, SWIVELING RAMPS AS WELL AS OVERWIDTH PRE-EQUIPMENT AND LOAD SECURING. IDEAL FOR CONSTRUCTION MACHINERY AND HEAVY HAULAGE TRANSPORTS. ---- * EXPORT SALE ONLY WITH DEPOSIT (MIN. €500 - €2,000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS PLATES, 17-21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATION REQUESTS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and non-EU countries, a deposit of at least €500.00 / €1,000.00 will be charged. (For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied.) Subject to change, errors and prior sale! More vehicles can be found on our homepage: Sales are only carried out according to our terms and conditions – see homepage. Important note – Important information: Despite carefully checking all details in our offer, errors may occur. Some of these are due to transmission errors within the systems of different platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it serves as information for contract initiation. All information provided is without guarantee and does not represent warranted characteristics.

Stanje: novo, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, OTHER GÜVEN LOWBED TRAILER? HYDRAULIC RAMPS? STEERING AXLE? OVERSIZE EQUIPMENT? ----VEHICLE HISTORY OTHER GÜVEN TRAILER? STEERING AXLE? PEN? MOVABLE RAMPS? OVERSIZE? NEW? LIFT AXLE? MANUFACTURER * GVN-TRAILER – OUR OWN PRODUCTION FROM TURKEY * AXLE CONFIGURATION * THREE-AXLE * THIRD AXLE WITH STEERING AXLE * WITH LIFT-AXLE * OSMAN KOÇ AXLES * DRUM BRAKES * AIR SUSPENSION BODY * WITH GOOSENECK * EXTENDABLE LOWBED TRAILER, 6 M EXTENSION * ADJUSTABLE KINGPIN, 22 TONS DIMENSIONS * FROM RAMPS TO KINGPIN (CLOSED): 9.40 M * FROM RAMPS TO KINGPIN: 12.10 M * EXTENDED OVERALL LENGTH: 15.40 M * EXTENSION: 6.00 M RAMPS * HYDRAULIC RAMPS * SWIVELING * HYDRAULICALLY MOVABLE RIGHT AND LEFT EQUIPMENT * AIR SUSPENSION * LOAD SECURING LOOPS * OVERSIZE PREPARATION * TOOLBOX TIRES Hfedpfx Aljylfmfjfog * TIRE SIZE: 235/75 R17.5 * TWIN TIRES WEIGHTS * EMPTY WEIGHT: 12,500 KG * PERMISSIBLE TOTAL WEIGHT: 58,000 KG * TECHNICAL PAYLOAD: 45,500 KG * TECHNICALLY PERMISSIBLE OVERALL WEIGHT: 58,000 KG * AXLE LOADS: 12,000 KG PER AXLE CONDITION * NEWLY MANUFACTURED DESCRIPTION GVN THREE-AXLE LOWBED TRAILER WITH LIFT AXLE AND STEERING AXLE (3RD AXLE), AIR SUSPENSION, AND OSMAN KOÇ AXLES WITH DRUM BRAKES. EXTENDABLE SEMI-TRAILER WITH 6 M EXTENSION AND ADJUSTABLE KINGPIN. HYDRAULIC, SWIVELABLE RAMPS, AS WELL AS OVERSIZE PREPARATION AND LOAD SECURING. IDEAL FOR CONSTRUCTION MACHINERY AND HEAVY-DUTY TRANSPORTS. ----* EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT CUSTOMS CLEARANCE EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION PLATES, AND 17-21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATION ONLY VIA EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU & third countries, a deposit of at least €500 / €1,000 will be charged. (For sales to the EU and third countries will be levied deposit/guarantee of at least €500.00 / €1,000.00) Subject to change, error, and prior sale! More vehicles can be found on our website. Sales are made exclusively according to our General Terms and Conditions – see website. IMPORTANT NOTICE: Despite careful inspection of all details in our offer, errors may occur. Some are caused by transmission errors in the systems of the various platform providers. We therefore point out that all information is without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for contract initiation. The information provided here is without guarantee and therefore does not constitute warranted characteristics.